3D Printed PETG molds for kydex holster making

Рет қаралды 5,700

Shaman Holsters

9 ай бұрын

3d printed PETG filament molds for kydex holster making.
cults3d.com/en...

Пікірлер: 44

@lewykabury 9 ай бұрын

well done dude! i use one time blue tape to avoid the 3d printer line marks...works great, holster is smooth. regards

@Shamanholsters 9 ай бұрын

Thank you!

@PHXholsters 2 ай бұрын

Just bought one of your magazine molds off Cults. Printing it right now. Looking forward to trying it. If it turns out well, I will be buying more! - Thanks - the vid is awesome also!

@Shamanholsters 2 ай бұрын

Thanx, if you have any questions, modifications, or anything else, feel free to contact me any time.

@PHXholsters 2 ай бұрын

@@Shamanholsters Just pressed your mag mold for the Sig P320. So far I am impressed! Question ? You have pre-marked drill patterns for the belt clip - there are 6 holes - too far apart for a Fomi - what clip did you form for?

@Shamanholsters 2 ай бұрын

@@PHXholsters Thank you! Holes are for tek-lok.

@PHXholsters 2 ай бұрын

@@Shamanholsters Is that the knife version or the holster version? Knife version is more narrow. BTW - I am a German Shepherd man myself.

@moti15IAF Ай бұрын

was is your workflow for designing this? do you start off with a 3d model of the pistol? how come the petg doesnt melt?

@genin69 Ай бұрын

nice molds dude. am looking to get a few. will you be expanding your mold lineup soon?

@Shamanholsters 16 күн бұрын

Sorry I couldn't reply to you earlier. I'm working on molds constantly but not uploading it yet. What model do you need?

@user-yi5xo3cl8o 27 күн бұрын

What material you use for print your molds ?

@Shamanholsters 27 күн бұрын

Some cheap PETG

@b.1z966 9 ай бұрын

Look very good. How can i order a holster from u ?

@Shamanholsters 9 ай бұрын

Bozidare, I already made you a holster. I know you are a gun addict, but you are also a holster addict.

@b.1z966 9 ай бұрын

@@Shamanholsters aaahhhh...u recognized me 😁🤣. Well...one can never get to many good gun stuff 🤣🤣 Just don't tell my wife 🤣🤣🤣🙂

@userdwbrn3186 5 ай бұрын

Hi, do you have any tips for printing with petg? I love your designs and already purchased one file from you. I'm just having a really hard time with my petg sticking to my nozzle and ripping itself off the bed when the extruder moves by it.

@Shamanholsters 5 ай бұрын

Hi! Thank you for purchasing my mold. I can help you with PETG. I print my own molds. Sleepless nights with my printer, until I found perfect setup. You can write me on my mail anything you need for 3d printing.

@Shamanholsters 5 ай бұрын

shamanholsters@gmail.com

@grappler185 7 ай бұрын

Really good ideas! Are you going to add your contact info to your channel page, so we can reach out to you.

@Shamanholsters 7 ай бұрын

Thank you! I’m not very good with social networks :). My contact mail is shamanholsters@gmail.com

@grappler185 7 ай бұрын

Very good. FYI, You can also list it on your channel's home page. That way others can find you easily.@@Shamanholsters

@Shamanholsters 7 ай бұрын

Thank you, I appreciate it. I got to find some time to play with youtube, instagram, etc. I did not post a lot of my projects.@@grappler185

@grappler185 7 ай бұрын

@@Shamanholsters What state are you in?

@Shamanholsters 7 ай бұрын

@@grappler185 Serbia

@JoseAguiloworkshops 9 ай бұрын

How do you avoid mold deformation with petg? Even abs deform with very hot kydex. I have lucky with nylon, but it's a pain to print.

@Shamanholsters 9 ай бұрын

I use some cheap PTFE spray and as soon as I press the Kydex, I use air compressor to blow the kydex. =Zero deformations. You can still see layer lines on the printed mold, even after 20 shells.

@JoseAguiloworkshops 9 ай бұрын

I do my own pressure molds, but I will buy one from you cause you help me here! Thanks

@Shamanholsters 9 ай бұрын

@@JoseAguiloworkshops No need to, I’m glad I can help!

@JoseAguiloworkshops 9 ай бұрын

@@Shamanholsters did you try them in abs? Abs for us is very simple cause we use a bambulab xc1. Most of our molds are from nylon. But as I mention, it is a pain in the a$$ fighting with moisture. So if we can gateway with petg or abs is a win win.

@Shamanholsters 9 ай бұрын

@@JoseAguiloworkshops No, I spend a tons of PETG and time to tune my Ender 3v2 to print PETG perfect and I don’t have much of the choice in my country to buy filaments. Only pain for me is only print time, but I’ll try to reduce print time with 0.8 nozzle, before I buy k1 max.

@Lsd5688 8 ай бұрын

What printer do you guys recommend for making these molds

@Shamanholsters 8 ай бұрын

I use ender 3 v2 with all metal hotend. Any printer that can print PETG would do.

@Lsd5688 6 ай бұрын

How many rolls of filament did you use to make both molds

@Lsd5688 6 ай бұрын

I just got a 3d printer and planing to buy some of your files I was just wondering if it take a lot of filament to make one

@Shamanholsters 6 ай бұрын

@@Lsd5688 Hi. One side is approximately 250g of PETG filaments with slicer settings that I use. 20% gyroid infill, 5 lines bottom, 10 and more layers on the top.

@jiayuan4848 3 ай бұрын

可以购买你的打印文件吗