3D Printing Meets Robotics: How to Make Your Own SMARS Robot

Рет қаралды 75,036

Жыл бұрын

In this video, I'm showing you how to 3D print & assembly of the SMARS Robot with the Arduino Uno. This is a project you can do on your own and it's a great way to learn how to use 3D printing and Arduino Uno.
If you're interested in learning more about 3D printing and Arduino, then this is the video for you! In this project, you'll learn how to print the SMARS Robot with the Arduino Uno. This is a project that you can do on your own and it's a great way to learn how to use 3D printing and Arduino.
Get SMARS Robot Components, Codes..- 3delworld.com/how-to-make-sma...
SMARS Robot 3D Printed
3D Printed ROBOT
3d printed Arduino projects
Arduino Projects 2023
obstacle avoiding robot using Arduino Uno
.
Model used in video :
SMARS Modular Robot - www.thingiverse.com/thing:266...
.
Things Used In Videos-
Arduino UNO REV3: amzn.to/3xgytk0
Motor N20: amzn.to/3jIKtI0
L293D DC Motor Drive Shield: amzn.to/3K2wqrk
HC-06 Bluetooth 2.0: amzn.to/3HRgmWQ
Ultrasonic Module Distance Sensor: amzn.to/3K0KVMd
Breadboard Jumper Wires: amzn.to/3IeOKfE
9 Volt Cell Rechargeable Batteries: amzn.to/3xfknPP
.
USEFUL Things for Your 3D Printer -
1) Filament Friday 3D Print Tool Kit : amzn.to/3oLNTIH
2) Mintion Beagle Camera for 3D Printer : amzn.to/3vBnYaC
3) SUNLU Filament Dryer : amzn.to/3vBnocN
4) Creality 3D Printer Ender 3 S1 Pro : amzn.to/3zPxrh3
5) OVERTURE Silk Filament PLA : amzn.to/3zqIZ8V
.
Are you a 3d modeler or designer
looking for a platform
to showcase your work??
Fill this form to send your 3d models to 3DELWORLD. #3dprinting #3dprints
docs.google.com/forms/d/e/1FA...
Stay connected and spend your valuable time to watch and learn something new.
.
Follow us on:
Instagram: / 3delworld
.
For Business Queries:
3delworld@gmail.com
.
► Music Credit:
Rough Nights by Artificial.Music & Mehul ShaRma
/ artificial-music
/ mehul-sharma-2. .
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/3DsBQrz
Music promoted by Audio Library • Rough Nights - Artific...
.
Dawn by Wanheda / user-724527508
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3Y8QJXV
Music promoted by Audio Library • Dawn - Wanheda (No Cop...
.
#3dprinter #3dprinting #3dprintingtimelapse #3dprintingus #3dprintinggermany #3dprintinguk #3dprinted

Пікірлер: 104

@piushmishara9617 Жыл бұрын

Crazy video 🤠🤠🤠

@hemantsusodiya3538 Жыл бұрын

Video is very nice!

@arushichawal7606 Жыл бұрын

Good ♥️

@aaliyakhan2463 Жыл бұрын

liked a lot

@diveshkumar8337 Жыл бұрын

What a great video

@3DELWORLD Жыл бұрын

Glad you think so!

@jorel973 Жыл бұрын

I love it I might make one as well, thank you for the great videos 👍

@3DELWORLD Жыл бұрын

Glad it helped 😊 stay tuned for more👍

@HakkiOgrt 4 ай бұрын

thnx

@maurovianna4702 11 ай бұрын

Good looking robot! I just found my next project!

@3DELWORLD 11 ай бұрын

Glad you find your new project 😀👍

@samarshaikh5601 Жыл бұрын

OMG 🔥🔥🔥🔥

@pablograciasanchez7953 10 ай бұрын

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

@conorstewart2214 Жыл бұрын

Cool robot. One possible improvement could be to stick the tracks together better, at the moment it is only friction holding the filament used as a pin in. If you melted the ends with a soldering iron or 3D printing pen then it would prevent the tracks from coming apart.

@3DELWORLD Жыл бұрын

That's a good Idea, I will try that 😊

@prasadbelgi2121 Жыл бұрын

Mast very good 👍

@3DELWORLD Жыл бұрын

Glad you think so!

@benjibitter 11 ай бұрын

Hello, I am creating this robot and I use a 298p shield and a HC06 bluetooht module. What changes do I have to make in the code and in the connection to be able to manipulate the SMARS? I hope you can help me

@davidespinosaalarcon1234 9 ай бұрын

Hello, sir a question the mechanisms at what scale are printed, because in my case to print them at 100% does not let me connect them together with the filament wires. Please help me

@mamad8263 3 ай бұрын

Hey, what 3d printer / slicer did you use ? I’m wondering what’s wrong with my print I can’t get the mechanical tracks to print properly. It just goes haywire and melds to one big glob of filament 😭

@trackpadgod 5 ай бұрын

Hello, I saw that you have added an on/off switch. May I know how you have done that(wiring) and which switch you bought?

@briangoldberg8242 Жыл бұрын

Great project. I printed and built the SMARS and I used the same motor shield and components you recommended. I'm trying to upload the sketch for the ultrasonic obstacle avoidance, but something is missing. What sketch and library files did you use? I'm not a programmer, so creating my own sketch is unlikely. Any help you can offer would be greatly appreciated. Thank you!

@3DELWORLD Жыл бұрын

Glad it helped sir, I have created page for code/sketch. you will find Code/Sketch Here: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

@briangoldberg8242 Жыл бұрын

Thanks for the help. I got it working! Awesome project. Great find. Keep them coming!

@prajenlittledancestar6458 Жыл бұрын

Can we hve ur phone number sir we r unable to run the robot

@KavishsWorld1133 3 ай бұрын

I just 3d printed the tracks for the SMARS Robot but the holes are too small so can you please suggest what to do?

@inteligenciafutura Жыл бұрын

it's lovely

@3DELWORLD Жыл бұрын

Yes it is 🤩

@AlexAlex-bh8fi Жыл бұрын

Cool nice

@jabeatsproductions8430 5 ай бұрын

Hello!!!! What RPM has rhe motors??? Thanks!! Loved the video👌❤❤

@FLYHIGHDIY 3 ай бұрын

But how do u change battery

@kameronyoung781 Жыл бұрын

Amazing video! Which app are you using to control it?

@3DELWORLD Жыл бұрын

Glad you liked, the Bluetooth RC contoller app

@solehb.1308 8 ай бұрын

@@3DELWORLDcan you provide us the link for the app ,please😊

@GaWoP 8 ай бұрын

Can you share or post the link to the app that is used to control this device? You left off one of the most fundamental pieces of this project working...

@3DELWORLD 8 ай бұрын

I am using the "Bluetooth RC Controller" app (that blue color app with a car logo on it), but you can use it by your preference. Sometimes some apps have bugs, that's why I didn't post any link 😊👍

@NishadShivraj007 5 ай бұрын

@gregs8629 14 күн бұрын

Why might my HC-06 for bluetooth not flash? Do i connect it to something other than the motor sheild?

@IbarhimGaMer888 Күн бұрын

Ensure you connected it properly to the motor shield

@geimarygonzalezpino9953 11 ай бұрын

Cuáles son los materiales??

@dedey0637 2 ай бұрын

is a resin 3d printer good too for robotic?

@3DELWORLD 2 ай бұрын

Yes, you can print this with resin, compare all parts total weight in slicer of both FDM vs Resin, which one is lighter.

@Pixels... 5 ай бұрын

Would it be possible to use a camera instead of a ultrasonic sensor? Or would I have to use something like a raspberry pi?

@IbarhimGaMer888 Күн бұрын

There could be other microcontrollers that can give you camera support but I think a raspberry pi is the most suitable and obvious choice

@KavishsWorld1133 3 ай бұрын

Can I use an HC-05 Bluetooth module instead of an HC-06 Bluetooth module?

@3DELWORLD 3 ай бұрын

Yes, HC-05 Bluetooth works smooth

@feras__2198 Жыл бұрын

Sorry but how many pieces I had to print of mechanical track ?

@3DELWORLD Жыл бұрын

For track 16 for one side and 16 for other, total 32 pieces.

@Cody_123-34 5 ай бұрын

Hello, the application you use is not available in the play store ;(what would be another application that I could use? 😢😢

@3DELWORLD 5 ай бұрын

Try different one, which supports Bluetooth analogs

@juliolugo5511 Жыл бұрын

Where is the 3d model for what you have to print and what are those things?

@3DELWORLD Жыл бұрын

Link given in the description : 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

@movilgame3016 5 ай бұрын

Que se usa para unilas? 1:08

@3DELWORLD 5 ай бұрын

1.75mm filament

@trevorlauv 7 ай бұрын

can you use a arduino mega board instead?

@3DELWORLD 7 ай бұрын

You can, but you have to make changes in 3d model and also in Arduino code

@trevorlauv 6 ай бұрын

what changes do you have to make in the code and can you send them to me? plz and thank you?

@andresmateo4281 7 ай бұрын

Hi, how much RPM have the N20 motors?

@jabeatsproductions8430 5 ай бұрын

Good question😬😬 does anyone know??

@3d_stampa_ivanjica 7 ай бұрын

When I copy your code into the arduino idle app it shows an error. What is the problem.

@3DELWORLD 7 ай бұрын

what kind of error you are facing? also try this, copy the code and first paste it into note pad. and from copy it from the notepad to Arduino app with new sketch.

@Crimenarchivado 10 ай бұрын

hola para crear-lo es obligatorio hacer eso de el ordenador?

@3DELWORLD 10 ай бұрын

Hello, for 3d printing you need to slice a 3d model in your computer for 3d printer and also you need a PC to code Arduino (also done by android smartphone).

@3DELWORLD 10 ай бұрын

Hola, para la impresión en 3D, necesita cortar un modelo 3D en su computadora para la impresora 3D y también necesita una PC para codificar Arduino (también hecho por un teléfono inteligente Android).

@Legnd292 3 ай бұрын

How can I get the app to control the robot. Or do I have to design this myself

@IbarhimGaMer888 Күн бұрын

I think they removed it from the play store, not sure why... But I believe you can still get the apk from the internet

@Legnd292 Күн бұрын

@@IbarhimGaMer888 awww dang well at least I can get it somewhere thx

@Ayhamkindle 8 ай бұрын

Good looking robot.... How did you create the phone app? do you have a tutorial for creating such mobile - arduino based apps?

@3DELWORLD 8 ай бұрын

Glad you like the video, I have not created that android Bluetooth app. It is already available on play store.

@avyayjain7896 10 ай бұрын

hi can you provide 3d files for the robot i tried finding it but could not find it

@3DELWORLD 10 ай бұрын

Hello, Link is also available in description. www.thingiverse.com/thing:2662828

@tk-n-b8-763 Жыл бұрын

Plz can you give me the code with ultrasonic

@3DELWORLD Жыл бұрын

Sure: drive.google.com/drive/folders/1d5Fo9JU2dxaz12Q1zFZSpQlanErb9FA8?usp=share_link

@user-tp6hi5rj5f 6 ай бұрын

Untuk membuat total habis berapa

@3DELWORLD 6 ай бұрын

I forgot the total cost 😅

@happytazer2709 7 ай бұрын

Brother i have 50rpm motor is it posible?

@3DELWORLD 7 ай бұрын

n20 Motor ?? if yes then try it. it might work.

@jabeatsproductions8430 5 ай бұрын

Did it work with 50rpm brother??? Is it good??

@feras__2198 Жыл бұрын

Where’s the code of Arduino

@3DELWORLD Жыл бұрын

Link is in the description: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/

@feras__2198 Жыл бұрын

Thanks

@pablograciasanchez7953 10 ай бұрын

Jesucristo te ama muchísimo, arrepiéntete de tus pecados y ten perdón de pecados en Su Nombre

@fgibgijf 8 ай бұрын

Where s code

@3DELWORLD 8 ай бұрын

Here it is: drive.google.com/drive/folders/1d5Fo9JU2dxaz12Q1zFZSpQlanErb9FA8?usp=share_link

@fgibgijf 8 ай бұрын

@@3DELWORLD thank you bro 👍🙏😁

@3DELWORLD 8 ай бұрын

@@fgibgijf Wlcm bro ❤

@suambuli Жыл бұрын

Flagging the site for download as virus? May be not virus but tracking.

@3DELWORLD Жыл бұрын

The site is safe 👍

@feras__2198 Жыл бұрын

whin I put the code Arduino tell me this not correct #include why ?

@3DELWORLD Жыл бұрын

Install "Adafruit motor shield library" on Arduino IDE. then create new sketch and paste full code.

@feras__2198 Жыл бұрын

@@3DELWORLD it works thank you 🙏 ❤️

@3DELWORLD Жыл бұрын

@@feras__2198 Glad it helped🎉❤😊

@phuonganh6445 Жыл бұрын

tôi không thể gắn cảm biến siêu âm của mình vừa với file của bạn nó dài hơn 2mm

@3DELWORLD Жыл бұрын

Which ultrasonic part (model number) do you have ?

@phuonganh6445 Жыл бұрын

@@3DELWORLD That is HC-SR04

@phuonganh6445 Жыл бұрын

@@3DELWORLD I edited the stl with SolidWorks and it worked, thank you very much

@3DELWORLD Жыл бұрын

Good to hear 😊 Enjoy!

@user-db1xl3se4y 5 ай бұрын

Hi, how much RPM have the N20 motors?

@sirwanpro 4 ай бұрын

100rpm

@geimarygonzalezpino9953 11 ай бұрын

Cuáles son los materiales??

@3DELWORLD 11 ай бұрын

Things You Need For This Project: 3delworld.com/how-to-make-smars-robot-3d-printed-2023/