3D Printing SETTINGS EXPLAINED

3D Printing SETTINGS EXPLAINED - for Beginners

Рет қаралды 101,627

7 жыл бұрын

In this video I show you the effects of the main 3D printing settings and what to watch out for if your prints aren't perfect. I go over temperature, print speed, layer thickness, extrusion and the importance of quality filament.
Thanks to 3dk.berlin for providing the filament used in this video. Check them out here: 3dk.berlin
If you want to learn more about the filament subscription check out this link: 3dk.berlin/en/home/184-3dkraft...
Make sure to use coupon code A8ZH2A9V for 15% off!
Some good resources when you have problems with your prints besides this video:
www.simplify3d.com/support/pr...
If you are looking for a 3D printer, I recommend this one: t.co/TGh8abqvMG
Use Coupon code GBCR10J to save a few bucks.
Support me (for free) while shopping online (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Aliexpress: s.click.aliexpress.com/e/b3a0ISl6
Amazon (US): amzn.to/2pJVveJ
Amazon (DE): amzn.to/2pK1YFx
eBay.com: ebay.us/xd6vPa
eBay.de: ebay.us/AwHtLQ
-----------------------------------------------------------------------------------------------------------------
My links:
-----------------------------------------------------------------------------------------------------------------
Instagram: / darkartguitars
Website: www.darkartguitars.com
Thingiverse: www.thingiverse.com/DatulabTech
Github: github.com/datulab
E-Mail: guitar@darkartguitars.com
-----------------------------------------------------------------------------------------------------------------

Пікірлер: 88

@allychisenhall7500 3 жыл бұрын

This video is fantastic. I'm an automotive engineer and use 3D printing for my CAD prototypes, but hadn't ever been trained on setting up the prints after I created the designs. I am always having to rely on others to help me with my settings because no one seemed to be able to explain the settings to me either. This is so clear & useful for me. I appreciate it!

@teodulosoriano513 7 ай бұрын

5 seconds into this video and I say what a great sinematic effect

@meraduddcethin2812 5 жыл бұрын

Danke. Your clear and thorough explanation of the different base settings as well as the images are exceptionally helpful.

@FliVisualsMedia 7 жыл бұрын

I have been watching lots of your videos recently, keep up the great production quality and content!

@DarkArtGuitars 7 жыл бұрын

I will!

@MrGunnaras 7 жыл бұрын

Very good video . Keep up the good work. Cheers

@jameskeough4620 5 жыл бұрын

Well done, informative video. I appreciate the lack of annoying background music. Also, your diction is excellent!

@roccoreid2842 4 жыл бұрын

I love positive feedback: :)

@cartooncottage2024 2 жыл бұрын

Finally! This is the type of video I was looking for!

@MIR.G.H 7 жыл бұрын

I know your videos recently, and was impressed. I look forward to watching your new video.

@babylonhobbiesandfpv4862 5 жыл бұрын

Hi my kossel is having an issue, when i initiate a print it prints at about 270 mm off the hot bed, how do i fix that, i have auto leveling, am running marlin, the printer is anycubic kossel delta linnier plus.

@sm64guy28 6 жыл бұрын

Good video! You Learned me a lot about 3D prints!

@ulkesh78 5 жыл бұрын

Appreciate the vid, informative and detailed pics help a ton. I'm just now starting to print so I'm digesting a ton of data. This helped!

@mikedoingmikethings702 6 жыл бұрын

Another great video!!! I like your videos because you take your time to explain it in simple terms so it is easy to understand for “novice” 3D printer enthusiasts like me... Danke Schön!!!

@ninobrouwers1818 5 жыл бұрын

Thanks for the video, I'm doing some research cause I'm planning on buying one. Keep up the good work!

@eliasbboy 6 жыл бұрын

Great explanation for a new guy like me. I will definitely be watching more. Thank you.

@travismeyers3516 6 жыл бұрын

Thank you for the video. I learned a lot from this.

@joliver1981 6 жыл бұрын

Nice video. I learned a lot. Very good information. :)

@DesignzbyJJS 3 жыл бұрын

Thanks for the advice. What if you increase heat as you increase speed. Instead of keeping same temp but higher speed.

@bombay2008 6 жыл бұрын

Very informative, great video

@christopherpaulino2932 6 жыл бұрын

Honestly I don’t see the problem as others say by you being to close to the camera. I can here you very clearly. The fact that you seem as though you are trying to speak clearly due to being a perfectionist, or compensating for your accent. Either way you’re very patient and was more healthful then most videos I’ve seen. If I don’t have to rewind or repeat the video, then it’s a BIG Plus. Again very detailed, very well outspoken, sharp camera quality...etc you seem like an expert. Thanx for not using background sound or music during the lesson. I would only like intro music and ending music. As long as you keep it short. It is for knowledge purposes. Again thank you keep up the lessons as such for effective learning for all.

@christopherpaulino2932 6 жыл бұрын

Helpful not healthful lol. Typo

@m.kanawati4385 6 жыл бұрын

Danke für die einfache Erklärung. Gut gemacht

@aditijoshi4992 2 жыл бұрын

My issue is that after a few hours down the line, mid print, the extruder stops extruding. No clogging. Just direct drive gear marks on the filament. Using pla, at 200deg, 0.3 layer, 0.8 retraction. Please help. Ender 3s1pro

@Aalsobiae 7 жыл бұрын

A lot of valuable information. Cannot wait to see your new videos :)

@Kyle5K 9 ай бұрын

Great video, thank you for the tips!

@hothmobile100 3 жыл бұрын

Great information! Thank you.

@nihalpandey4764 3 жыл бұрын

Can you please tell me how to change the raster angle ??

@megatech1966 6 жыл бұрын

Helpful video 👍

@danphilpott6302 5 жыл бұрын

Very helpful. Thank you!

@matthewsager925 2 жыл бұрын

This was a great and informative video. Thanks!

@michor10 7 жыл бұрын

Great video!

@Grant849 4 жыл бұрын

If I go from .4 to .25 mm nozzle what settings do I need to change?

@TaitGuy 3 жыл бұрын

Thank you, good info!

@redheadhockey9071 Жыл бұрын

Is 2 and 2.1 a big difference I’m new to this stuff

@vic09x 5 жыл бұрын

Thanks! I’ve learned a lot!! Regards

@hotdon1 5 жыл бұрын

Great video iam brand new to this and you helped me a lot.

@andyives5482 5 жыл бұрын

Excellent young man clear instruction with picture keep up the good work

@guarawow4221 4 жыл бұрын

Really good video. Enlightening! thank uo so much

@aerospaceTUdelft 6 жыл бұрын

Good vid, thank you

@abdullahrahmani2556 4 жыл бұрын

Thanks Budd! learned a lot. thanks for taking your time to explain everything in very good way. liked, commented and about subscribe! ✌🏻

@Pillin123 4 жыл бұрын

This vid was so helpful for me as a beginner, I could understand everything so clear, Thanks

@louisefisher5407 3 жыл бұрын

This video is so easy to learn from! Thank you.

@lizarddude990 7 жыл бұрын

Awesome! This Really Helped!

@DarkArtGuitars 7 жыл бұрын

Happy to hear that!

@uhwaste3583 5 жыл бұрын

Hey whats the best printer to get for a base with ok speed and detail?

@DarkArtGuitars 5 жыл бұрын

depends on your budget, I had good luck with the CR-10, if you have more to spend, look at the prusa printers.

@JoshuaLotion 7 жыл бұрын

what about infill?

@Andratos95 3 жыл бұрын

Great video, lots of useful informations for a beginner like me!

@VitharPL 4 жыл бұрын

Very good basics. Maybe you not covered retraction and cooling, but anyway, it's very informative and practical piece.

@ladellallen3155 5 жыл бұрын

The video was very helpful

@cadguy9879 3 жыл бұрын

Very helpful

@joetinker7855 4 жыл бұрын

thank you it was very helpfull

@luisff7030 7 жыл бұрын

Low quality filaments can have contaminants that will block small nozzles. For low quality filaments, with contaminants, I recommend a nozzle of 0,5 mm. For nozzles lower than 0,2 mm, is good to have something to protect the filament from the dust, because the dust can block the nozzle. I'm not saying this will always happen.

@nruth633 4 жыл бұрын

Thank you

@hedhuntervizo6749 Жыл бұрын

Thanks

@divyebtw8360 3 жыл бұрын

NICE VIDEO

@Nuggets105 4 жыл бұрын

Some of yall are hella mean, just focus on this man's great content lol

@eggling3427 5 жыл бұрын

Your mic is so good it sounds like a asmr video

@wallerron 4 жыл бұрын

10:00 oh, a "Giger print" Good list. Thank you!

@residuevideos 5 жыл бұрын

Very nice video and explanation. Please ignore the toxic people commenting here.

@neliswillers7987 7 жыл бұрын

thanks! good video! I am impressed by your English usage as well, better than many native speakers. Keep up the good work!

@snaprollinpitts 6 жыл бұрын

excellent video, thank you a big thumb's way up and sub from me!!!

@dmawzx 6 жыл бұрын

Layer thickness = 0.7(max) nozzle diameter

@philhubbard8931 6 жыл бұрын

Does it make beer ? Surely it`s time to make something we need, beer!

@jesuschal 6 жыл бұрын

A guide to set the correct extrusion: kzfaq.info/get/bejne/rcWHlZOalZO1pqM.html

@DrWho-uk6ju 7 жыл бұрын

Hey, nice video but pleeaaaassseee... go a little bit further away from the camera

@TheOneTheyCallDean 5 жыл бұрын

He should get closer with each transition 😜 Learned a lot!

@zitroxlpthegreenone9324 5 жыл бұрын

His head is exploding lol😂😂😂

@fishstickcsgo2980 7 жыл бұрын

No offense but Just don't creep on the camera anyways keep it up with your videos

@drwhite7285 5 жыл бұрын

@Kendrick Harrison The Internet is a harsh place, Its Expected, you can't control it.

@akar68924 4 жыл бұрын

Look everybody its Megamind!

@sampapageorgiou5165 4 жыл бұрын

This is Edwart Norton when he was young xP

@Durthul 6 жыл бұрын

JIMMMMMMMYYYYY!!!!

@VolkmannTimo 6 жыл бұрын

No it is Ji ji ji m m m my!

@samdavis1228 4 жыл бұрын

tongue reduction yes?

@Skrek1988 5 жыл бұрын

but sort of much depending on the printer it self and what it can handle, and like 60mm/s printspeed and about temp on 205 C prints fine good finish on it , now u want to print on about 80mm/s with same results increase the extrusion multiplier 0.01-0.04 and increase the temprature to sort of 220-225 (on pla sort of an example) but good video man keep it up