This is actually a pretty good channel. Respect for content mates
@ProtolabsMFG3 жыл бұрын
Thanks! :)
@sherrychiu72952 жыл бұрын
Chiheng Hardware is a professional manufacturer of CNC machining parts from China,we can make repeated positioning accuracy within tolerance +-0.005mm.please contact me if you want to know more about CNC machining.
@LogLab2 жыл бұрын
Damn this video was so comprehensive and well explained. I would think this would have hundreds of thousands of views.
@ProtolabsMFG2 жыл бұрын
Thanks! we have more CNC videos on our channel. Make sure to subscribe so you don't miss out :)
@sherrychiu72952 жыл бұрын
Chiheng Hardware is a professional manufacturer of CNC machining parts from China,we can make repeated positioning accuracy within tolerance +-0.005mm.please contact me if you want to know more about CNC machining.
@utkarshkumar57743 ай бұрын
Great video. Everything explained in crisp manner. Love it !!!
@DormantIdeasNIQ2 жыл бұрын
About to plunge into the CNC world at the RC scale... Finally a video that lays out what my newbiebrain kept wrestling with, accuracy, precision, tolerances, tool and machining capabilities. ...like how is the tool made to cut inside/outside the line? - I quickly saw the need to create a combination of 2.5D sub pieces to build a 3D final object that the limitations of the tools prohibits as a one block creation. - I also dreamed of repositioning(he mentioned), as I would have to do that to design pieces that are bigger than the machine can handle. - One thing I also have thought of is how to get an inside corner to be square. basically, a square piece can be made to fit inside a round one... tricky! ... This will work to a maximum precision as per the smallest tool that can be used, and given the thickness of the surrounding material requirement. so, run the small tool in a second pass, past the corner design until all the corner material is removed and the small tool is driven by a distance of its radius past the actual corner desired... that will leave an indentation in the corner that is 1/2 the width of the small tool(clover leaf), and leave the inside fitting piece the space it needs to mesh squarely. ... or if possible, round the corner of the inside fitting piece to match the original outside piece rounded corner. ... or use another sawing/shaving tool to clean the corner, a specialized attachment rotated in position on the same head.
@ChrisMurrayEWC3 жыл бұрын
How do you only have 3.8k subs, very well done video man. Thank you!
@ProtolabsMFG3 жыл бұрын
Thanks, Chris!
@Durian1st3 жыл бұрын
Good info. Thank you, 3D Hubs.
@hms1688 Жыл бұрын
Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.
@robertbheatcoker8638 Жыл бұрын
3:22, you meant depth < 4 x Diameter, or depth < 4 x Length. Thanks, great information and videos.
@olivierauthelin4823 Жыл бұрын
Great video! Thanks a lot :)
@ProtolabsMFG Жыл бұрын
Welcome! Glad you liked it.
@sautronvianney9008 Жыл бұрын
This Channel is awesome
@cheeriomartinez3 ай бұрын
This is awesome.
@ilyashulika35383 жыл бұрын
Great tips)) Thanks a lot ))
@ProtolabsMFG3 жыл бұрын
Happy to help!
@1ZBL-wj2uw4 ай бұрын
good
@jsincoherency3 жыл бұрын
The maximum depth of holes you recommend is 4x the diamater. OK. But then why do you go on to say 10x is typical? What does that even mean? Isn't that 2.5x higher than the maximum you recommend? That doesn't sound typical.
@joezeni32702 жыл бұрын
Glad I'm not the only one lost in the sauce here
@aries67762 жыл бұрын
Yeah I just spotted that.... I think he's recommending 4x Tool diameter for hole depth for best results, but says 10x is typical and 40x is feasible. EDIT: yeah doesn't make sense. I just researched it and anything over 5x and you need to use peck drilling to remove swarf and then 7x you need to use special parabolic drills. You can go to 20x with gun drills. There were other errors in this video as well.
@sherrychiu72952 жыл бұрын
@@aries6776 Chiheng Hardware is a professional manufacturer of CNC machining parts from China,we can make repeated positioning accuracy within tolerance +-0.005mm.please contact me if you want to know more about CNC machining.
@zaknefain1005 ай бұрын
@@aries6776What is feasible is totally dependent on whether or not you have high pressure, through-spindle-coolant and through-tool coolant. 40x is not entirely uncommon these days in some applications. kzfaq.info/get/bejne/i7Vxi61o0LWwiqs.htmlsi=SV7aIHRH0WVXPsvy
@Bart_Depestele3 жыл бұрын
Thank you
@miroslavstiburek75213 жыл бұрын
Hi, great video! I just didn't understand one part-when you were recommending using a T-Bone undercut when 90 degrees corner is required. Could you please elaborate on what you mean by that?
@peterdow36073 жыл бұрын
I didn't understand this either.
@zaidmcalz54503 жыл бұрын
I believe this was an error. What you can do is design in a relief pocket where the fillet eats into the corner. Slightly hard to explain. Only thing on this video I found that wasn’t very accurate.
@abdulrahmanaluofi75484 жыл бұрын
THANKS
@1ZBL-wj2uw4 ай бұрын
DO you need CNC machining center?
@aaronfonseca60314 жыл бұрын
Hey mate, great information. Next time, please either have the music on the whole time or none as it seems repetitive when the same sound plays, maybe even make it a bit softer :) you’ve got a sub and a like from me :)
@ProtolabsMFG4 жыл бұрын
Hey Aaron, thanks for the feedback. We will definitely take it into account. We want the videos to be informative and enjoyable to watch :) And thanks for subscribing and liking the video!
@aaronfonseca60314 жыл бұрын
3D Hubs no worries mate, keep up the great work!
@zaccomusic4 жыл бұрын
nice contents hope you keep update :)
@ProtolabsMFG4 жыл бұрын
Thanks! We are definitely keeping it up :) Subscribe if you haven't yet to not miss anything!
@sherrychiu72952 жыл бұрын
Good day ! Zacco.Chiheng Hardware is a professional manufacturer of CNC machining parts from China,we can make repeated positioning accuracy within tolerance +-0.005mm.please contact me if you want to know more about CNC machining.
@gandyo0014 жыл бұрын
Great video but that drill bit image is a wood bit
@ProtolabsMFG4 жыл бұрын
Hi Andy, you are totally right. Thanks for the feedback! We try to make these videos as informative and factual as possible but unfortunately we don't always get it 100% right. Next time we'll have an even better look :)
@danchoi089 ай бұрын
You need to cut down on the hand movements. I know it's a psychological trick to attract attention, but I can't stand too much of it.
@jesusgotthatdrip45529 ай бұрын
Womp womp
@youtubehandlesux14 күн бұрын
Nah, it's pretty obvious the more someone's hand moves while talking about something, the more authority they have on the subject.