3M Full Face Reusable Respirator 6800

Рет қаралды 130,801

8 жыл бұрын

The 3M Full Face Reusable Respirator 6800 is simple to use and comfortable to wear. Combine with a broad range of twin, lightweight 3M filters or cartridges to provide respiratory protection against particulates and a variety of gases and vapours.
- Soft, silicone face seal for greater comfort and durability
- Wide field of vision. Polycarbonate, high impact visor
- Simple and easy to use
- Well balanced, four strap head suspension which is easy to put on and take off
- Unique centre adapter to direct exhaled breath and moisture downward, helps reduce debris from depositing in the valve, and allows for quick and easy cleaning
- Flexible system for use with 3M gas, vapour and particulate cartridges and filters
- Can also be used with 3M Supplied-Air Systems
- A range of spare parts and accessories are available
www.atadist.com.au/6800/3M-Ful...

Пікірлер: 114

@docfaceful 3 жыл бұрын

A trick i use is rubber band one of those cheap 50 cent covid masks everyone wears over the expensive cartridge filters I use.that way the expensive 3m cartridge I use is not totally covered in dirt ,in the cloud of dirt I work in.then throw away the cheap ones every break.keeps your expensive $25 cartridges from getting clogged.if you work in a dirt cloud.rototilling etc.hey,it works

@b3owu1f 2 жыл бұрын

Does this in any way effect the good filter? I wouldn't think so.. but just curious if it reduces it's ability in some manner. That's a brilliant idea.. I imagine you're able to keep on using the expensive filters for a lot longer.

@SagarisDanB 4 жыл бұрын

We are adapting other masks to use these P3 filters. You must use the P3 filters!

@randommemesweekly4417 4 жыл бұрын

im just chilling in the woods with me military grade gas mask

@StreetSweeper1776 3 жыл бұрын

I’m looking to get one of these masks I think it’s going to be worth it

@dandiyresilient4666 5 жыл бұрын

Same question here but they don't seem to be in a rush to answer

@mejicles1130 3 жыл бұрын

Is this a good mask to use to reglaze bath tubs and cabinets?

@toxic_narcissist 4 жыл бұрын

nCov-2019 gang where you at?

@djGreenALERT 4 жыл бұрын

Working, trying to save lives!!!

@randommemesweekly4417 4 жыл бұрын

right here

@CSGhostAnimation 3 жыл бұрын

Ayeee we don't wear masks, we've stepped the fuck up and bought full face respirators.

@user-rw5be3um5e 3 жыл бұрын

This is the feeling I bought on lazada in China is very good to share with you: www.lazada.com.ph/3m-6800-reusable-full-facepiece-respirator-medium-size-7-pieces-set- including-3m-6001-organic-vapor-cartridge-3m-5n11-filter-3m-501-filter-retainer-1-respirator-2-cartridges-2-filters-2-retainers-i1190520912-s4201010937.html?spm= a1zawe.14297203.productReviewTable.2.61f04edfPt5Cnc

@atoms3751 3 жыл бұрын

@@user-rw5be3um5e fake

@raghavendrashetty885 4 жыл бұрын

Is possible to do sterilization? Please suggest which methods Gas or Plasma sterilization?

@AgoristsAxioms 6 ай бұрын

its super tight everywhere but at the top of my nose. air still gets through the top no matte what i try

@user-nf5yd4kc9b 6 ай бұрын

great.. thx

@grigoriyagonoshko 3 жыл бұрын

please tell me to apply amitraz Which one should I use

@vincentbartolomemd 2 жыл бұрын

Is fogging a problem?

@JayRoo64 Жыл бұрын

I have a MSA HARDHAT can I wear this and my helmet for work ?

@Imwright720 Жыл бұрын

I’m guessing if it doesn’t seal it will fog very quickly

@Lovemesomeleftytears 3 ай бұрын

Anyone know a tip for the holes, I took them out cause it tangled up or something and now I can't get the straps back in the holes to be able to wear the mask

@Kuraimizu9152 3 жыл бұрын

Is this effective at filtering viruses?

@frozenfridge3943 2 жыл бұрын

This is a city transit vibe

@curiousgeorge555 Жыл бұрын

What is the point of holding your "breath for 5-10 seconds" 3:38 ? Should the air pressure slowly release for that long? My 6800 releases in one second or so. It would seem to be a VERY IMPORTANT point to make clear in your video. Please clarify.

@tahircoca5643 3 жыл бұрын

is ok for Protect flour dust ????

@haunclesam 5 жыл бұрын

Does one have to use both filters, or could one also close one of the sides with some sort of protective cap?

@atadistributors1106 4 жыл бұрын

Hi there, apologies for the very very late reply. There are no advantages with only using one side of the filters. The filtered side would be doing twice the amount of work to compensate and the user would find it harder to breath through. Recommended for dual filtered use only.

@gabyyyfrom86 4 жыл бұрын

@@atadistributors1106 I bought this mask (new) but the plastic inside smells bad...i can not wear it....i washed it very good ..the box has a seal ?....because my box did not have...maybe it was used before....

@abdulrahmanbello7758 2 жыл бұрын

Why it vibrate when using

@DeTurrisFlor 4 жыл бұрын

Can these be used with glasses?

@sunkissedtempleofra5395 10 ай бұрын

What do you clean it with?

@aperson37 3 ай бұрын

Might need one of these if bird flu becomes a pandemic. Hoping it doesnt happen.

@remgeesales 3 ай бұрын

Is it possible to smell chemical when using this particular mask?

@censorshipBS 4 жыл бұрын

I bought one of these from ebay around a month ago when it was kicking off in wuhan, You know just incase 😎 It was delivered from China 😁😂😃😄😅 It's come in very handy the last 2 weeks

@VanIyke 4 жыл бұрын

Same here.

@user-rw5be3um5e 3 жыл бұрын

@whis5448 4 жыл бұрын

Brought one for the COVID19 and alot of P100 pink filters.

@pointcuration1278 4 жыл бұрын

Same. If there's a quarantine, or even a recommendation to wear masks, I'm not going outside with a surgical mouth and nose mask.

@cats-uk 4 жыл бұрын

P3 is what it’s called in UK

@plummetplum 3 жыл бұрын

I've got short stubble and won't be shaving it off. What about if I used some Vaseline , this might help the seal?

@kicks2785 Жыл бұрын

Perform a fit test that will answer your q

@telmafloriano3478 4 жыл бұрын

I need a one

@thinkingneurons2908 3 жыл бұрын

For how long does a cartridge can be use?is it resusable and washable?thanks

@andydawe4078 4 жыл бұрын

can you do “Grinding” in these, because the extraction valve flaps i have been told let particles in to your mouth, even when face fit and with and good seal?

@totallyfrozen 4 жыл бұрын

Andy Dawe First off, let me say that I have a made in the USA, 3M mask. Not a Chinese knock-off. The 3M mask is high quality and designed well. If you get the right size mask and do a fit check to insure it is air tight to your face, you can work in high dust environments without trouble. The valves don’t let particles into your mouth. If someone told you that, they were probably using a damaged mask. The air enter through the filters and passes through the first set of intake valves that allow the clean air inside the window lens to prevent fogging. Then the filtered air passes through a second set of valves into the respirating cup over your mouth and nose. The exhaust you exhale goes out the bottom of the respirating space into the outside and and never into the window lens. Because if this design, all air in the mask is filtered and it mask never fogs. Hope this helps.

@cdon2day 4 жыл бұрын

I bought mine for using while heavy duty sanding with an angle grinder on cedar, and that fine dust does not get past the filters. You have to have the filters on for any sort of grinding. The flap for the exhaust from your mouth is only one way, out. So how could particles get in?

@andydawe4078 4 жыл бұрын

Chris Donaldson when you are close up working in confined spaces that’s when, also some are wondering it could be the seal isn’t designed good enough when moving about and when you’re face fitted by health and safety representatives you are sat down in a chair wired up to a computer, to many people at our work complaining about them and that’s with the best filters you can get for these 3M full face masks

@newbeginning1510 9 ай бұрын

I have a small chin and big nose what size should I get ?

@LittleMONSTERSeanG 4 жыл бұрын

So serious question for all of the nCoV/2019 comments and the channel owner. - what filters are recommended for the nCoV/2019 virus?

@towerduck2357 4 жыл бұрын

Should be p100 filters

@dcwood2137 4 жыл бұрын

N95, P95, P100, etc.

@cats-uk 4 жыл бұрын

P3 filter or better

@InessaFishman 4 жыл бұрын

how long are the p100 magenta filters "good" for?

@cats-uk 4 жыл бұрын

totallyfrozen I think the idea is that it filters out the droplets in the air and the spittle (not the actual virus itself, as you say)

@zephyrcrease2669 4 жыл бұрын

does anyone know of an online place selling just the filters ? i bought what was supposed to be a full set for my son and i - and it has turned up with no filters - preferable Australian

@rickstard73 4 жыл бұрын

Hey, Just wondering if you found filters, I am in the same situation.

@VanIyke 4 жыл бұрын

ebay.

@user-rw5be3um5e 3 жыл бұрын

@miguelangell.q7236 4 жыл бұрын

6800 vs últimate full mask ff-403 series Which is the best

@lorddrewno4589 3 жыл бұрын

Of course ff-403 series. But it's really specialized. If you are not working in toxic environment, 6800 should be fine.

@shalvakochladze4169 2 ай бұрын

What is filters adjustment hole size for the mask? Is it 40mm?

@viciousKev 2 ай бұрын

Its considered bayonet, not 40mm

@jesuschristislord9150 Жыл бұрын

Matthew 6:19-21 NKJV "Do not lay up for yourselves treasures on earth, where moth and rust destroy and where thieves break in and steal; [20] but lay up for yourselves treasures in heaven, where neither moth nor rust destroys and where thieves do not break in and steal. [21] For where your treasure is, there your heart will be also.

@orthosportsspecialityortho6987 4 жыл бұрын

Can you use eye glasses with this mask?

@lillianlouli004 4 жыл бұрын

Can u use it with p100 filter?

@lorddrewno4589 3 жыл бұрын

Yes, but be sure you are buying compatible, so - it means developed by 3m.

@Cnwkchiwvekx 4 жыл бұрын

Need this for wuhan

@luyucheng 4 жыл бұрын

Yeah, even if I'm not in Wuhan, I bought one.

@jonathansng6968 4 жыл бұрын

I don't want to die

@GlobalAdventurer 4 жыл бұрын

I bought two half mask type. Now the full mask and the half mask are all sold out!

@totallyfrozen 4 жыл бұрын

This is very much overkill for the Wuhan Chinese coronavirus. These masks are between $100 to $140 without any filters. Now the filters are all but impossible to get. I wouldn’t waste the money on this for coronavirus.

@luyucheng 4 жыл бұрын

@Predator I bought it from my local 3M reseller, so there's no link.

@hmoobdaddy6804 4 жыл бұрын

Cannot find these anymore anywhere :(

@aap2827 4 жыл бұрын

selling mask for 1000 + 2 sets of filters, hit me up

@mrbaeman39lolman60 3 жыл бұрын

@@aap2827 i dont think youre trustworthy lol

@superstarjyp6760 3 жыл бұрын

the straps in mine are sliding loose, what do I do?

@Li-lj1fv 3 жыл бұрын

hm. Replace them / get a new one? Idk the price tag :/

@orlandoantonio6072 4 жыл бұрын

Can you still wear hard hat if you use this face mask?

@atadistributors1106 4 жыл бұрын

Hi Orlando, due to the 6800 being a full face mask, users are unable to wear a hard hat with this system. Hope this helps!

@makisjnx007 4 жыл бұрын

No, unless is a cowboy hat.

@mmcgee2170 4 жыл бұрын

Glasses ?

@kroms001 4 жыл бұрын

no, wearing glasses would create a void in the seal via the glasses arms going to your ears.

@vurimalla 3 жыл бұрын

Price?

@atulkumarpk9243 4 жыл бұрын

how often should we clean it for reuse? just change the filters? or reuse the filter after cleaning?

@DonnieBarkie 4 жыл бұрын

If you use it for COVID-19, then you have to disinfect the entire mask after each use. If you use filters with a plastic cover, then you can wipe the plastic off with disinfectant. Replace the filters when it becomes hard to breath through.

@miguelm6587 4 жыл бұрын

@@DonnieBarkie Had not thought about that...So if I use series 2000 filters (p100) do I need to throw them away when I get home? I assume there's no way to disinfect those.

@raghavendrashetty885 4 жыл бұрын

Is possible to do sterilization? Please suggest which methods Gas or Plasma sterilization?