Well, thank you for taking the time to leave such a lovely comment. It's appreciated. Dave

So nice of you. Thanks for watching. Dave

Do ensure you get the genuine 3M ones. Different manufacturers use different colours. I find the light green are usually my last stage. But yes you are correct, you need to work up through a couple of grades first. personally I love the yellow ones. great for removing tarnish and cleaning a joint before and after soldering. I just wish they where cheaper. Thanks for watching. Dave

Thanks and welcome. There's a lot to watch! and way more information on Tronex pliers than anyone really needs to know. Check out the HOW TO projects for the best videos and seeing all the tools in action. Dave kzfaq.info/sun/PLecOyNn7zT7y6DECwvH2TK4sO0xOQYJEY

You're welcome. Glad to have helped. Dave

Glad you like them! Dave

Thanks Tina, Glad you found it useful. Dave.

Glad it was helpful! Dave

Wow. Thanks for that technical explanation. It certainly explains the price of them. But as you say, love them. Thanks for sharing. Dave.

not technically true. Trizact and Cubitron II arent the same thing

Thanks, that the exact point of my videos. to show you what it is and what it does. Up to you to decide if you need one or not. Thanks for watching, and for taking the time to comment. Dave

@@CelticDreamsCoUk Bought them a sampling set to experiment with including the arbors, looking forward to giving them a spin, thank you again for sharing with us. Lance & Patrick, and oh hey Happy New Year 2023.

A few tumbling tips throughout my videos, before i got the magnetic polisher. Check out this one below for all you need to know.. Dave. kzfaq.info/get/bejne/r752pZmjsbXcnac.html

If you look around you can get larger ones for use on bench polishers etc. The yellow ones are awesome for removing scratches. Dave

Glad you enjoyed it! Dave.

You’re welcome 😊 Dave

Thanks. Perhaps you can order online and get them posted from elsewhere. they are small and light so should not cost much to post. Dave

Thanks for watching. Dave

Any will do. You don't need lots of power for polishing silver rand gold. Dave

@@CelticDreamsCoUk Are these radial brushes safe on gold?

Thanks for watching. Dave

Impossible question to answer. it depends on how hard you push, which discs you use, the speed and of course how long it takes you to polish each ring. but what I can say is that the 3M radial discs are "very" long lasting, especially compared to the silicone ones such as the eveflex. Dave

Celtic Dreams thanks for the answer! As someone who is new to jewelry polishing, even an order of magnitude would be helpful. Is it closer to 1, 10, or 100 uses before needing replacement?

@@JackMinardi Say 20 rings before you'd need to change the discs. But as above, - many variables. Hope this helps. Dave

@@CelticDreamsCoUk Thanks!

For removing solder you really want something firmer. That way you can remove solder but not the metal around it. I use thick abrasive rubber wheels with square edges (Eveflex discs), or knife edge wheels for tight areas. Or course the skill is to avoid using excess solder in the first place, and eliminate the need for cleanup afterwards. But when it comes to final finishing of the area, then these 3M radial discs are far superior and longer lasting than the eveflex version. Hope this helps. Dave

Thank you

The finer grits last longer such as the green. The harsher grits like the yellow wear out quicker. I wouldn't say they are a replacement for traditional mops and polishes. They are an 'additional' method when your in a hurry, or just require a small touch up. Dave

If the item is lightly scratched, then polishing is the way to go.. Se my video here on polishing a mens bracelet...Dave kzfaq.info/get/bejne/f9xmgbF00cDIfok.htmlsi=1pRIm73sJgZZeoR7

+Jay Cuneo Hello. Firstly the discs reduce in diameter when they wear down, hence new discs will be bigger in diameter. They will also be sharper and cut more. Hence a combination of the two will result in a uneven finish. Also, older discs may be dirty or contaminated, so adding the newer discs will be a waste of time as the finish is only as good as the worst disc. I too use them way past their best - I just wish they where cheaper. Thanks for watching. Dave.

Thank you Dave, makes sense. I'll change my methods. Just got in new mandrels so I'll can hold on to a set of old ones when I don't need as much grit and have fresh sets on standby for when I do

Impossible to say, it depends on what you're doing and how heavy you are with them. I ve found that the coarser grits wear out quicker and the finer ones seem to last longer. I can also say that the genuine branded 3M discs last way longer than other such as the evebnflex versions. hope this helps. Dave

Celtic Dreams I’m mostly only going to sand and polish some natural seeds (sea beans). I usually start with the 80 grit and work my way up to 2000. I’m mostly worried that the discs are only going to last 3 or 4 times.

Not like you would with traditional polish, as there is no greasy residue. Just wipe away any dust and carry on. Dave.

A lot of work sanding a door and you'd go through a lot of discs. I'd recommend a "flapwheel". More aggressive and will last longer. See link. Dave www.dremel.com/en_US/accessories-and-attachments/-/subcategory/accessory/find-by-tool/27343/rotary/27381

I know nothing about bike engines. But the yellow is the most abrasive one. note the chart in the video. Dave.

+Les 24 As with any scratch removal, you'd start with a coarse one to remove the scratches and then work up to finer grits to get a polish. The brown is the coarsest, so Id probably start with that one. Then move to a yellow, I use this a lot on silver, but the steel may need the brown one first. Blue will start to get a smooth slightly satin finish and pale green to finish. As with everything, it will take time, especially in steel and be careful around the stones, especially with the brown disc. see the link below there is an image of the whole range which I made for Eternal (under the main pic) www.eternaltools.com/polishing-abrasives/3m-radial-bristle-polishing-discs Depending on how deep the scratches are, you may prefer to polish them out using a cotton mop and some polishing compound www.eternaltools.com/polishing-abrasives/mounted-calico-wheel I can highly recommend Menzerna IP grey polish as used in many of my videos, but I only know of Sutton tools that supply it in the UK www.suttontools.co.uk/menzerna-p164-polishing-compound.html Hope this all helps you out. just shout or email me direct if you need any further advice. Dave.

+Celtic Dreams Thank you for all the helpful links... You have been so helpful, I though you may appreciate seeing the job I am looking to tackle. Please add any strategies you would use here. Thanks! www.auctiva.com/hostedimages/showimage.aspx?gid=1692620&image=851598642&images=851598605,851598592,851598624,851598642,851598656,851598676,851598690,851598703,851598719,851598733,851598750,851598766,851598781,851598794,851598807,851598820,851598827&formats=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0

I''m not an engineer, but I don't see why not. They are designed for polishing soft metals. The finer ones, such as the green or pink, would have more of a cleaning effect. whereas the coarser grits would have more of a polishing effect. Dave

Glad you found it useful. Dave

try.... www.gesswein.com/or www.riogrande.com Dave

Thanks. Dave.

I've never had that problem. Forgive me for saying the obvious, but did you have them the right way round?. I have tried a few others though like the Eve twist ones and they are no where near as good as the genuine 3M ones. So I would definitely encourage you to try them again, but ensure you get genuine 3M ones - they 'are' good.. Kind regards, Dave.

Yeah, I have been doing this for a while. 40 years at the bench. Sorry but IMHO these things are crap.

I can only repeat that I love them, and likewise several other jewellery friends do to. However , In the spirit of an honest review. I will include your thoughts. Thanks for Sharing. Dave.

Desmond Murphy Sorry but you're a perfect example of someone who's been doing something for a long time and because of that you think you can't improve it. People use these all the time and they're excellent, and you jumped into the conclusion that they're crap because you used it ONCE, and most probably in a totally incorrect way.

No. The abrasive in mixed in with the rubber. Just use them dry as they are. Dave

@@CelticDreamsCoUk Thanks, Dave. :-)

Foredom SR. www.foredom.net/flexshaftkitsandsets.aspx Dave

+Dexterko They do seem to last very well. As they are "impregnated" rather than coated, they never loose their abrasive quality. What happens is they get smaller as they wear down. I have a set of yellow ones which I've had for a few months now and they are pretty much worn down now (used several times a week). They may seem a little pricey, but they do last. In contrast some polishing points and rubber tips can wear down in seconds on one task.

+Celtic Dreams well, nice to see someone has made a product that is genuinely good! GJ 3M. Thank you for the reply!

+Carlos Vanquish ... I've only used them with silver and gold.When polishing glass watch fronts you usually need a strong abrasive such as diamond and there are special creams for doing this. Vice versa plastic is usually polished with a soft mop and special compound.....see the links. Dave. www.eternaltools.com/polywatch-scratch-remover www.eternaltools.com/diamond-polishing-paste

Copper is toxic? Ive never heard that before. The pipes in my house are copper and many people buy copper bracelets for arthritis. But certainly dust in any form isn't a good thing, so a dust mask is always recommended when sanding and polishing. Thanks for watching. Dave

Not far from it. He came from Bolton only a few miles away from Wigan where I come from, So yes quite similar accents. Dave.