Nice video bro. Your process on removing the bumper cover is really clear, especially on removing the fender flares CORRECTLY.

I'll add another heaping of praise for this video. This was really easy to follow and you've got a great instructional style. You explain a few grouped steps that you're about to do, and things to look out for, then go one by one through the list. This is probably the best car tutorial I've ever watched. I think the only thing that I would've appreciated some more help on would be techniques when re-installing the headlights. I had to attempt a few different weird angles before it finally worked out, and had to be careful not to scratch the lenses in the process. Having a second set of hands to pull the bumper and ensure no scratching was happening was really helpful.

Hey. I took my 17 tacoma to a large toyota dealer for warranty headlight replacement. They broke the fender flares and scratched my bumper as they removed it. Took them 6 hours to screw it up nicely. When they said i broke the flares and put the scratches in i made them review the shop video and made hell. They replaced it all via a body shop. Fast forward a few years i wanted to change my lens to aftermarket. Well I watched your video and i can't believe how easy you made it.... plus i didnt break a thing. Thanks

Perfect instructions. Took me about an hour to change both and no broken tabs!

So easy AFTER you explained it that even a GIIRRRL can do it. I did it to install Marimoto assemblies on my 2017 Tacoma. Thanks a bunch...you took all the mystery out of what could've been stuff possibly breaking. Kudos to your cinematographer...YOU.

Thanks for the video bro. Helped me a ton. When I got to 8:50 I got a bit confused but figured it out. What helped me (when pulling the bumper back from the fender) was to push the bumper-from the inside-toward the side of the car to get the bumper to detach from the fender. Hope that helps folks who might have been confused. Pulling the bumper towards the front of the car didn't help much.

Probably the best "How to remove Tacoma headlights" video I've seen. Thank you putting this together. Really helped a lot.

This is by far THE BEST video for replacing your headlights. Fantastic job. Cuts to the meat, no wasted steps. Will be sharing this.

Gotta say out of all the videos I’ve watched you’re by far the most descriptive and that helped immensely. Thank you!

The best detailed explanation I've seen yet...Thank YOU!

You are amazingly detailed and instill confidence to rip off the front end off my truck knowing I was not damaging it. I didn't fixed the light changed the grill to a pro and it all went back together like it never happened THX

Thanks bro! I just installed the new 2020 Oem Headlights on my 2019.. I took my time and just under an hour.. I recommend using a bumper clip remover to remove the blue clip from the panel on to the fender.. Other than that your video saved me a lot of time and money.

First video that goes over the bumper removal part. That is the one thing sketching me out. Thanks for going about this the right way. Getting ready to do this to my '23 Taco SR this weekend.

one of the best videos ive seen on installing anything for a vehicle. its very clear and hits the important points

I’ve taken my headlights off a few times now, and this video has the best process. That’s a great way to get the black fender flare loose, which was probably the part I struggled the most with before. Thanks a lot for this tip.

You have no idea how help this was. Ive been trying to find a good step by step vid. Urs is definitely one of the better ones

Thanks so much for this headlight video. Perfect step by step instructions. Had to replace passenger side light. Thank you...

Great video. Just finished doing the drivers side one on my 2017 Taco. Without this video it would have taken me a lot longer to do and I probably would have broken a few clips, and probably would have spare screws. Thank you for the video. Accurate and to the point.

Great vid! Best one I’ve watched so far about 3rd gen headlight assembly removal

Wow, more than I thought to replace driver side light that filled with moisture. Thanks

Killer tutorial. I was a little.nervous to take this on. Took right around an hour and everything went back together perfectly 🤌

Great job! I plan on installing a set of 2020 LED headlights into my ‘19 Tacoma. Your awesome video will help things go smoothly. One suggestion; tape over those headlights to avoid scratches!

Dude that was such a great video. You covered all the little things that a crazy person like me wants to know before I try this.

Really super helpful. Was able to change out my lights thanks to your video!

I have to agree with everyone else super informative and easy to do what you describe !! Thank you for the knowledge and info pimp !!!

Thanks for making this! I’ve got a mangled DRL connector on the drivers side, that will be a ton easier to repair with the headlight bucket removed. Now I know how to do that!

Best detailed headlights removal vid thx

Dude! Nice job on this video.... half the times I don't do something is because I'm afraid to break it.... great description of those clips...

Thank you for making the video. My son and I are replacing the passenger assembly after he broke the mounts on a ladies bumper.

Excellent video. Good instructions and right to the point.

Great video. Saved my ass when changing headlights

It was very detailed step by step disassembly. Thank you! 👏🏻👏🏻

great video man. no fluff, just the right stuff. thanks!

Excellent detailed video! Thank You, Thank You, Thank You!

Nicely done. It really helped out.

Dude great video on the steps needed I especially like your fender flare method! Subscribed.

Very well done instructional video friend too bad toyota didnt make it easier to remove headlights rather then having to take off the grill & prying off sides of the bumper I think car makers do this intentionally so people would bring their vehicles to the dealerships.

Great video I'm getting g ready to put in aftermarket headlights and this helps so much. Thank you!

Thanks a bunch for making this video! It really helped me when I was replacing my cracked headlights on my tacoma.

Very helpful on my 2016

love it! just what I didn't know (and will be doing). Cheers

Don’t forget to line that hood up! Haha

Good stuff bro 👍🤘 out of all the videos urs helped me ou the most thanks

When everything is back together the bumper near the pinch bracket seems loose on the driver side. Is there anything I did or can do to tighten that up where the plastic meets the metal seam?

Very Helpfull vedio thanks 🤟

Nice. Is there a similar option/upgrade available for the crappy tail lights it has?

When installing aftermarket headlights do you have to adjust them in any way or are they mounted in there at a certain angle that requires no adjustment? TIA

hell yeah! perfect video. thank you

Looks awesome bro , I’m in the middle of mods with my Tacoma

Sir, can you recommend where to get replacement from ? The one from Toyota is like $500, that too much, can u recommend go cheaper alternative ? thx

@06:05 Did you remove the bumper cover bolts on the bottom? I'm trying to change out the headlight assembly and I am stuck trying to expose the bolt on the side by pulling loose that bumper cover.

NICE! love the blackout headlights on the 3rd gen tacoma's

One the back of the headlight, does amber light that’s a side marker light come out?

Great Video! What were you pushing on with your right hand at 8:50?

What do those shrouds do? I may or may not have forgotten to put them back on after I re-installed the grill

When you’re separating the pinch bracket, do you just push from the inside and pull out towards you?

Does anyone have the part # of the 2 10mm bolts that holds the headlight in place ? Thank you

Awesome vid

Great vid

Thanks

Nice 👍 looks good

I got everything off but I cant get to that pinch you were talking about

I broke the bottom two clips of the fender liner, the clips look a part of the liner and not the clips where you just pull out. My OCD is killing me on it lol. Do you know where I can get a Toyota part # to look at a new one? Thanks

Damn good video!!!!

Thanks really helped!

How did you exactly snap separate the front bumper off? I’m stuck on this step lol

Thanks bro

Do you have a IG Great video would like to follow the truck build

So much work for a dam headlight 😪

*YOINK*

Thanks