3rd Gen Camaro Firebird manual front seat lock recline mechanism letting front seat flop forward and doesn't lock in place
Пікірлер: 11
@dbrinzo3 жыл бұрын
Fixed mine! Just hit it with a hammer several times and boom. Works minty.
@kalgrandy21012 жыл бұрын
Dead serious? I’m having trouble understanding how the seat should function in the first place. It’s supposed to be rigid until you adjust the seat angle or you can unlock the seat so it tilts forward allowing the passengers access to the back seat right?
@Sup3rDVD5 жыл бұрын
Super helpful, thanks!
@unclelyle62065 жыл бұрын
Awesome sauce! Thank you!
@ionutandrei63562 жыл бұрын
Nice video, i used a litle bit of rubber in the back of the white pice and is work as new.😉
@airplanegeorge3 жыл бұрын
how can I make my 83 el camino's seats lean back more. (more recline)
@machetemac742 жыл бұрын
Where can I buy these parts?
@bimron39102 жыл бұрын
Do you have a video removing and installing?
@kalgrandy21012 жыл бұрын
Just figured it out. With the seat removed, remove the non hinge side torx bolt then there’s 4 bolts on the hinge side. Two exposed. Two in the seat. You remove the lower seat piece (the sitting part) first by removing the exposed bolts and torx bolt. You have to then remove the hog rings holding the upper seat fabric down at the bottom so you can peel back the fabric to get at those other bolts. They’re like 3” bolts. Impossible to remove without moving the fabric first.