No video
Replacing Your Dirt Bike Wheel Bearings (at home with basic tools)
Рет қаралды 4,461
Күн бұрынIt's a pretty common job and thankfully no fancy tools are needed to replace your dirt bike wheel bearings!
-------------------------------------------
NEXT LEVEL
🔔 Hit the bell next to Subscribe so you don't miss a video!
👍 Like Our Videos
💬 Comment Below
📈 Support Our Channel Through Affiliate Links!
🏍️ Enjoy The Ride, Jared
-------------------------------------------
Help Support Our Channel Through Our Affiliate Links:
Amazon Storefront:
amzn.to/44eJUZ9
Buying Beta Parts 🛠? Choose "3 Seas Recreation" as your dealer upon checkout!
betausa.com/ac...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Everything in this video is based on information we learned from online resources, our own experience, and books we have read. Please do your own research before making any important decisions. You and only you are responsible for any and all digital marketing decisions you make. Thank you for watching!
#3SRTV #3SeasRecreation #DirtBike
@paisley3518 4 ай бұрын
Great to have the kids looking on. They learn without knowing.
@danarussell4246 4 ай бұрын
Been doing this job for 50 years now. Two years ago when I did it last I went to put the axle through the wheel which was super sloppy. I forgot the darn spacer. It had rolled under something when I took it out and totally forgot about it. Sucks gettin old but I won’t ever make that mistake take again. Even though the bearings are sealed I still carefully remove the dust covers and really pack the bearings with BelRay waterproof grease. I then toss them in the freezer overnight and put them in the hubs the next day. Great video and glad to see your son involved.
@CW-up7xv 4 ай бұрын
Yeah I've felt that and it was a loose axle, bearings were fine.
@andrecontois8510 4 ай бұрын
Remember check the wheel is on right, take it off and put it back on first. I don't know why but I've had wobble and the wheel was just a little loose maybe from a crash.
@ElChaparro818 24 күн бұрын
what should I do if my collar is loose a little bit
@philproud7254 4 ай бұрын
Nice Job :)
@TheDirtyBirchTrails 4 ай бұрын
Apply a little heat to the hub with a small propane torch so it will release the bearing quicker with less smacking of the drift/punch and not distort the hub. Ask me how I know(a new hub later) 🤐
@c-note4146 4 ай бұрын
Curious: you said sometimes you’ll take a wire wheel to the pinch bolts and then apply anti seize. Does the wire wheel remove the zinc plating and do you find that you need to address rust/corrosion issues as a result?
@JCMTNUT 4 ай бұрын
Is it pretty much the same thing for the rear? Mine needs it.
@thehungryhunter3454 4 ай бұрын
that's some crappy bearing to burn out that fast on such a clean bike.
Cross Training Adventure
Рет қаралды 10 М.
Cross Training Enduro
Рет қаралды 9 М.