I can't express how much I love your explanations and the measure twice, 'make a test one', then cut approach is just so great!
@3x3CustomTamar3 жыл бұрын
Glad to hear!
@christophercharles96453 жыл бұрын
It's a really nice piece and I like that you address a common issue that comes up in many carpentry projects: namely that things change. If I could point out two small things: the issue of your one corner piece not being consistently proud along the full length of your top board is most-likely due to your spline being slightly too thin and allowing the corner piece to drift back in the gluing process. (I know you did that on purpose for more glue area but you could probably dial it back a bit.) The other thing I might suggest is that you should clean up all the excess glue with a damp rag right after you clamp! You'll have FAR less sanding before you go to finish and that means less chance of sanding through your veneer, which was one of your concerns going into your decisions before the glue up. Looks like the final piece came out very nice!
@ryanm22142 жыл бұрын
I agree on a wipe down before it dries. Naturally I like learning things the hard way but learn that one I have lol.
@jwulf96Ай бұрын
"I thought of something in my head that I think is going to work" is so relatable with woodworking projects 😅
@FranksDIY3 жыл бұрын
Love how you added that piece at end so you wouldn't get blowover at the end with the router. People should practice that . I learned the hard way. Man I need to make more videos . I shoot out about 2 to 3 projects a week but never video them or get paid. Usualy for family and friends and ofcourse I donate stuff for worthy causes and charities .
@3x3CustomTamar3 жыл бұрын
Glad you liked it! And if you started filming them you would drop production down to one every 3 weeks..... filming my projects triples the amount of time I work on them
@64maxpower3 жыл бұрын
@@3x3CustomTamar I honestly thought making videos would add more than 3x the amount of time. I would think it totally breaks your flow
@antiagonista3 жыл бұрын
Congratulations.
@FranksDIY3 жыл бұрын
@@3x3CustomTamar i kind of stopped because of all the trolls. Hard enought to deal with stuff happening in my life than to read real bad negative stuff. I do have them made just need to finalize and ill post
@3x3CustomTamar3 жыл бұрын
@@FranksDIY I never let the trolls get to me. I know if someone is taking time out of their life to put negativity into the world there is something wrong with them….
@deucerider4302 жыл бұрын
I’ve been keeping the concept of a pair of nightstands on the back burner for quite a while. I couldn’t come up with corner joinery I was happy with. 🤔 Thanks to you, I now have it! Great video! Love your clear and concise explanations and your ‘human’ candidness re mistakes! Thank you!
@essendossev362 Жыл бұрын
oooo yeah that would be such a beautiful application of rounded edges!
@BeauChampion3 жыл бұрын
I sincerely appreciate you letting us learn techniques like this alongside you. This was a really cool way to solve your problem that really adds to the look of the piece. Keep up the great work!
@3x3CustomTamar3 жыл бұрын
Glad you like it!
@cfwood9832 жыл бұрын
T
@abby-i1i5 ай бұрын
Exactly the approach I was looking for to hide the plywood ends.
@chippyandpunk3 жыл бұрын
You not only succeeded, you knocked it out of the park. Beautiful work, Beautiful Lady,and very smart the way you think things through. You are a pleasure to watch.
@richiethebartender3 жыл бұрын
Despite fractious, imperial units - yeah, went there - surprisingly easy to follow your process! Thanks so much!
@3x3CustomTamar3 жыл бұрын
Ha. Thanks
@krisgee95533 жыл бұрын
Beautiful work! I've never seen an inner & outer round over applied that way before. Very creative. 👍
@3x3CustomTamar3 жыл бұрын
Thanks! Glad you liked it!
@Bibliotics Жыл бұрын
Thank you for sharing. As a fellow appreciator of the small details, I can tell you that while it seems small, the little details make all the difference.
@remoteflyboy3 ай бұрын
Great work Tamar, I totally agree you made the right choice with the darker timber for the corner infill, I love the way you explain in detail how you do certain techniques. 👍😀
@aniketkar943 жыл бұрын
I appreciate that you show the process and the mistakes too!
@3x3CustomTamar3 жыл бұрын
Glad to hear!
@mcinen673 жыл бұрын
@@3x3CustomTamar ⁹
@MrShelzy3 жыл бұрын
I have to jump in on this comment too, woodworking is all about learning and getting comfortable with new techniques and expanding your repertoire for design sake. You genuinely capture this spirit in every video with your skill and your journeys. I always learn something new.
@3x3CustomTamar3 жыл бұрын
Jeff Nakama really so awesome to hear. This whole journey has been so amazing to document and I’m so happy you guys are along for the ride
@patricemhorton12573 жыл бұрын
Agreed! That’s me at the end of your video, dropping things and getting glue everywhere! Thank you!😀
@leemajor18203 жыл бұрын
Your work is great! Even your test pieces look amazing. I was thinking you might have turned them into something else but then you stomped on them 😲 Its always a good idea to test new ideas for strength so in future projects you get a sixth sense as to what will be the best type/style of joint you can use. Thanks for sharing your work. I always feel like I have learnt alot, even if I haven't done anything. Looking forward to your next project!
@3x3CustomTamar3 жыл бұрын
So awesome to hear. Haha yeah. I had to stomp on them 😂😂😂
@tdkrei3 жыл бұрын
Good work and planning Tamar, not many professionals would even have thought that through as you did with the chamfer. Keep on smiling.
@3x3CustomTamar3 жыл бұрын
Thanks! Glad you liked it!
@willyw93793 жыл бұрын
I love how you breakdown all the steps and share your thinking. Best of all, there are no 'tricking edits (that I can see) to hide (tiny) mistakes. It motivates me to accept my (big) mistakes.
@3x3CustomTamar3 жыл бұрын
Glad you like it!
@derangedchicken21913 жыл бұрын
no no - use hardwood for your splines. and keep them to a press fit so all alignment is spot on - cut grooves slightly deeper than width of spline to allow for relief when gluing and clamping. when i was making tables i would use spline joints for the tops to increase the glued surface area, but nice and tight with relief in grooves. i also used an expanding urethane glue to fill the gaps. awesome work though. keep the projects rolling...
@beqwaam3 жыл бұрын
She explained your points in the video. That is why i look at the whole video.
@derangedchicken21913 жыл бұрын
@@beqwaam keep on watching there buddy. you are doing fine.
@Grunt493 жыл бұрын
Love watching you design and problem solve!🥰
@3x3CustomTamar3 жыл бұрын
Awesome to hear because I like doing it. Ha
@Jasper743 Жыл бұрын
You are a great teacher and I really cannot believe with very rudimentary equipment you do such a great job. Many in their videos assume that we have hundreds of thousands of dollars like them equipment. Thanks
@lorettacrabtree781611 күн бұрын
Love your ingenuity and tests how to do it differently plus testing 👌
@LarsThurman3 жыл бұрын
When I glue boards together I take a damp paper towel and wipe off the excess glue, makes clean up easier once the clamps come off BTW love the channel.
@c319798393 жыл бұрын
Wow, that's a super nice looking edge! I might give that a try on one of my next projects.
@3x3CustomTamar3 жыл бұрын
Thanks! It was fun to figure out!
@thomaswarth.9083 жыл бұрын
Hi, first of all best greetings from Germany. I came to the woodworking thanks to my daughter (doll bed etc) and then I saw your videos. I love the way you show us how to troubleshoot and explain why this happened or what could be changed. Just that you always make new connections, it's just amazing. I have few machines and have to do a lot by hand. But you often show 2 or 3 ways how to do it when you don't have the machines. Please stay like this and keep doing it. And please stay healthy
@3x3CustomTamar3 жыл бұрын
So awesome to hear! I hope to keep doing it! Ha
@dannmarks3 жыл бұрын
Yes, I have been woodworking (hobbyist) for 40 years and I love watching your videos. Not sure when I learn something new or if some of it I knew but forgot about. Point is I really love your videos.
@3x3CustomTamar3 жыл бұрын
So awesome to hear. Thanks!
@jamespotter48783 жыл бұрын
That little lip the round over bit left is called a fillet
@kazolar3 жыл бұрын
“My kids aren’t going to be able to mess up this project.” -- oh how many times have I said that. I got a 5 and 7 year old. I made a beautiful cedar mud kitchen for them for this summer -- CNC engraved with their names -- I hope it can make it through another summer -- I no longer say that something is child proof. It's child resistant. That's best we can hope for. It's like cell phones with a waterproof rating, it's just a matter of time and pressure.
@3x3CustomTamar3 жыл бұрын
Hahaha! That is the truth....
@genelegate13083 жыл бұрын
Not meaning to rain on your parade or anything but your kids and their destructive abilities are known because you're raising them. Wait until your grandkids visit! With them, you've not had a hand in raising them nor could you possibly imagine their abilities to break the unbreakable. Still wouldn't have it any other way and love when they come to visit :)
@3x3CustomTamar3 жыл бұрын
Gene LeGate 😂😂
@kazolar3 жыл бұрын
@@genelegate1308 at 5 and 7 I got a ways to go before grandkids. My kids love it when my mom comes to visit, and yes she is constantly impressed when I tell her why I had to fix something because my kids broke it, and always tells me, you and your sister never did that...
@pteddie69653 жыл бұрын
@@genelegate1308 You are correct, Gene. The difference for me is that I don't get as angry when my grandkids break something as I did when my kids broke things. That being said, I do prefer to go to my grandkids' house rather than have them come to mine. I wonder why?
@davidlamberson54353 жыл бұрын
I am a big fan. What can and old guy ask for when watching woodworking video's. Your cute, funny, pleasant, and a good woodworker. Total package. Keep up the good work!
@amanullahkhan-ama2723 жыл бұрын
Tamor, I have seen your project addition of roundover to plywood looking very fabulous very decent, you are really very genius and very skilled.
@3x3CustomTamar3 жыл бұрын
Thanks!
@almirsilva79133 жыл бұрын
Maravilhoso, adoro seus trabalhos muito bom para nós leigos, cada dia aprendo mais, vc faz tudo parecer tão fácil e prático, um abraço Almir aqui de São Paulo Brasil.
@joey10923 жыл бұрын
I wish I had hair.. I wouldn't keep on loosing my bloody pencil. Great work!
@3x3CustomTamar3 жыл бұрын
😂😂😂 and get sometimes I still can’t find it
@PatrickPretorius3 жыл бұрын
This feels more about a really nice way of joining plywood at 90° than it does about the roundover. This is a really nice elegant way of joining and hiding the ply, and very strong to boot. Nice one!
@3x3CustomTamar3 жыл бұрын
Glad you like it!
@josephbrauer25733 жыл бұрын
Oh wow , your video could not have been shown at a better time , been working on a project and thinking of a different type of miter corner and your spline idea with contrasting wood is exactly the great idea I have been looking for . I will send you a photo of the finished project if you like . Thanks again Tamar .
@3x3CustomTamar3 жыл бұрын
Awesome. Love it when that happens
@reforzar3 жыл бұрын
“My kids aren’t going to be able to mess up this project.” ::cracks fingers:: “Challenge accepted”
@3x3CustomTamar3 жыл бұрын
😂😂😂😂
@t1n44443 жыл бұрын
Brian P ... obviously kids aren't teen-agers, then. It's when said teen-agers decide "your" tools are "family" tools ... you can guess the rest ...
@michaelhines18913 жыл бұрын
Grr saw this after i made my comment. You beat me by 30 minutes.
@wakamiwailer3 жыл бұрын
That's exactly what went through my head when she said that and I scrolled down here to type it up and wouldn't ya know it, this was the very top comment!
@t1n44443 жыл бұрын
In UK, "Game on."
@cristianosantos75623 жыл бұрын
Sensacional! Parabéns pelo seu talento, gostaria de ser seu aluno! Kkk
@xylemmelyx3 жыл бұрын
You are such a wonderful teacher! I'm also very glad to see more women bringing their talents to woodworking. Keep up the good work!
@3x3CustomTamar3 жыл бұрын
Thanks! ✌️
@samprime31802 жыл бұрын
Its a long video, but watching this is like hearing a lecture in wood working. Beautiful explanation. i learnd many things. Thanks Tamar. You can starting teaching in college.
@3x3CustomTamar2 жыл бұрын
Haha glad you liked it
@musicamex3 жыл бұрын
You are a skilled technician and a good teacher . I am a luthier but like to almost make anything. I like your practical intelligent approach and honest presentation. I feel like I learn from you but WITH you too.
@3x3CustomTamar3 жыл бұрын
That’s so awesome to hear! Thanks!
@thewoodlesworkshop.1573 жыл бұрын
Wow! Perfect solution...! I am now also experimenting with plywood, and have not thought about such a solution as you suggest. Thank you very much for this video. I always look at your projects with pleasure. Take care of yourself and good luck.
@3x3CustomTamar3 жыл бұрын
So glad you liked it!
@MicheluceRizzuto3 жыл бұрын
I’m so happy that I found you! I’ve been watching your videos for a while now and I’ve learned a lot. So, thanks. This video is perfect for me right now because I can’t seem to get a perfect 90 degree miter joint for my plywood. It doesn’t take much of a slip and the 45 degree cut is wasted. Especially if you’re trying to make something perfect. I’m making a couple of night stands for a customer. I’m an auto technician and trying to get the heck out of this business. My customer saw some other furniture pieces that I made for myself and asked if I could build the night stands for her. I told her that I would and now I’m committed. The only problem I was having was the miter cuts because I couldn’t get them perfect in order to sell them to her. I tried this type of joinery that you did in this video on some practice pieces and they turned out great. I’ll be redoing the carcasses this week with this type of joint. I think I’ll do another couple of practice pieces with different shades of wood because it’ll be obvious that there’s two pieces of wood and it won’t flow. So why not enhance it, eh? Thank you very much for the guidance! M
@3x3CustomTamar3 жыл бұрын
So awesome! Glad you were able to get something out of the video!
@russellfay813 жыл бұрын
Tamar, your ingenuity is worthy of recognition! I hereby wish to bestow upon you the honorary doctorate of PhD in Woodworking from Wood State U(?)! Congratulations Dr. Tamar! BTW, I would have bet a million dollars you would have gone with the contrasting wood! Fortunately, there was nobody to take that bet!
@3x3CustomTamar3 жыл бұрын
Hahah! Glad for you that no one was around 😂😂
@bapt_andthebasses3 жыл бұрын
I don't even build stuff with wood, I just have bass guitars which are basically made of wood, but your videos are so entertaining and very explicative, as someone mentionned, it's cool that you show your mistakes too. The constent smile and positivity are added bonuses!
@3x3CustomTamar3 жыл бұрын
Glad you like them anyway! Ha!
@highmileagehusband19152 жыл бұрын
"But, we're here now" Just brilliant.
@andyfarmer7593 жыл бұрын
It's great that you show your thought/test process. I think you made the right choice with the Walnut hardwood and the project is going to look awesome.
@3x3CustomTamar3 жыл бұрын
Glad you like it! Looking forward to finishing it up!
@davidmeyer92043 жыл бұрын
I really like your "build" videos but I like these videos as well. Thanks for taking the time to show us your different methods and how they worked. Thanks for taking to time to doing this. Really appreciated it.
@3x3CustomTamar3 жыл бұрын
So glad to hear that it’s appreciated!
@Eduardomd542 жыл бұрын
Tamar, I wish you were my daughter, and been able to work with you, and learn from you ! Thank you , great class as always.
@robertevans64813 жыл бұрын
Tamar your channel is so underrated. You have so much skill and talent. Keep up the awesome work and videos..
@3x3CustomTamar3 жыл бұрын
Thanks! ☺️☺️☺️
@jasondoust49353 жыл бұрын
That's a nice way to create a strong, modernist flavoured joint. I have a sweet sounding pair of bookshelf speakers that have the most awful cabinets. (80's walnut-ish contact vinyl over chipboard.) I've been going to rebuild them for about a decade and I think that you've just shown me the genesis of what they will become. Thanks again Tamar!
@3x3CustomTamar3 жыл бұрын
Awesome!!
@johnlake63213 жыл бұрын
You just changed my life! I've been internally wrestling with how to make an enclosure for a power supply for a turntable I'm building. Now I know. Thank you.
@3x3CustomTamar3 жыл бұрын
Awesome. Glad you liked it!
@freakazoid59073 жыл бұрын
Great video, I really appreciate that you took some time to solve the mystery of curved corners on a plywood cabinet, thank you very much.
@3x3CustomTamar3 жыл бұрын
So glad you liked it!
@meestahwah3 жыл бұрын
Not sure how I landed here but happy I did. I have a boat project that requires round edges in teak stain grade furniture. I have been wondering how to do this and this is the idea I imagined (hardwood corners with plywood panels). I hadn't yet worked out the details. Now I know how to actually DO it. Thanks for the tutorial!
@3x3CustomTamar3 жыл бұрын
So awesome to hear! Glad you found it useful!
@1958indyfan3 жыл бұрын
I am not sure exactly how I came across this video, but more importantly your channel, but I am glad I did. Can't wait to start binging. Very impressed.
@3x3CustomTamar3 жыл бұрын
Awesome! Hope you enjoy!
@Stepwel4two3 жыл бұрын
Excellent idea for the corner joints, you’ve given me an idea for another project, cheers.
@3x3CustomTamar3 жыл бұрын
Awesome
@allcleanenterpise3 жыл бұрын
I'm a baby woodworker and some of your skills are outside of my wheel house, but I always learn a little something watching your channel. Really cool project, your cutting board project was really cool also.
@3x3CustomTamar3 жыл бұрын
So glad you like them! Just keep trying and keep at it! Something will click!
@wayneyadams2 жыл бұрын
One of things I like about her channel is the fact that she works much like woodworking hobbyists, that is she set up her machines by trial and error on scrap.😀😃😁
@FireAngelOfLondon3 жыл бұрын
Well this idea I can use, thank you! I have a stack of birch plywood and assorted hardwoods waiting to be made into furniture and I will definitely be looking closely at variations on this technique. I'll try test pieces with variations on the size of the round-over and using contrasting woods for the edge-joining pieces. Thank you again for the inspiration!
@3x3CustomTamar3 жыл бұрын
So awesome! Have fun!!
@AndrewMcNett3 жыл бұрын
Tamar you are a straight up bad ass. So inspirational without any bs. I learn something useful from every video you publish.
@3x3CustomTamar3 жыл бұрын
So awesome to hear! Thanks! 🤘🤘
@beqwaam3 жыл бұрын
Love the way you show the different ways to approach a woodworking problem. Thank you.
@3x3CustomTamar3 жыл бұрын
So glad you like it!
@StephenBoyd213 жыл бұрын
It that sort of detail that turns a good piece into a brilliant piece. The result looks fantastic.
@3x3CustomTamar3 жыл бұрын
Thanks!
@NMranchhand3 жыл бұрын
Very clever. Which, is the hallmark of your work. I spent quite a while having fun thinking about the different woods that would make different statements in the corners. I agree with your thought of insuring that no one takes it as a failed attempt to create a seamless transition. Entertaining and informative.
@3x3CustomTamar3 жыл бұрын
Glad you liked it!
@sandromor20073 жыл бұрын
I love your projects and your natural way of showing the things that happens in real life.
@3x3CustomTamar3 жыл бұрын
So awesome to hear!
@rgking03ify3 жыл бұрын
As a new person to woodworking I enjoy everything you put out for us to learn and grow!! Fabulous Job!!
@3x3CustomTamar3 жыл бұрын
Awesome to hear!
@aprildegele1510 Жыл бұрын
I love your channel and I love your work. I've been a subscriber for a while. The best part is that you simplify things to it's lowest common denominator :) I'm also a female woodworker and I've noticed that the men I work with make things so hard. Plans, explanations, solutions ... I'm a volunteer at a non-profit 50+ center woodshop and I can't tell you how many times I've had to try to convince folks, (sorry guys, but men in particular), to not make things so large because it's unnecessary, or to simplify their plan or process to achieve the same result. Jigs don't need to have a 50lb weight-lifting requirement. Usually, in many other things in life, it's the opposite. Weird, huh? Probably the difference in problem-solving. Women are different than men in that respect.
@stephanb20063 жыл бұрын
I can not tell you how much I appreciate that you didn't try to sell me anything. Most of the wood workers I follow these days don't really show techniques. Thank you! and keep up the great work!!
@3x3CustomTamar3 жыл бұрын
So glad you liked it! But I do have ads in a lot of my videos. It’s the only way I can continue to make these videos....
@savilex90093 жыл бұрын
love your thinking process, how you spotted the problem, found an elegant solution and executed it well
@3x3CustomTamar3 жыл бұрын
Glad to hear! I have a lot of fun figuring this all out ☺️
@craigpreston8260 Жыл бұрын
great idea and wise to leave it proud for inconsistencies, Thanks for the idea!!!
@Ouwetje3 жыл бұрын
I am following you some years by now, and see you growing better and better. I think you reached the pinacle. You're now officially a master woodworker. Greets from the Netherlands.
@3x3CustomTamar3 жыл бұрын
Thanks ☺️ but there is always more to learn ☺️
@64maxpower3 жыл бұрын
I really liked the 1/4" round over to the miter. Way more than I imagined
@3x3CustomTamar3 жыл бұрын
👍
@g.fortin3228Ай бұрын
Really love that you say what worked and what wasn't working.. helps guide us if we tackle similar. Thank you :-)
@aprildegele1510 Жыл бұрын
I have done the same with less than perfect miters. It actually works pretty well as long as you leave that little thin bit a little proud. Also, this gives a great opportunity to use contrasting wood, or expensive exotics, without breaking the budget.
@3x3CustomTamar Жыл бұрын
👍👍
@andrewbieger5004 Жыл бұрын
Fantastic build, all around. You have solved a problem about joining plywood panels without the cheesy iron on edge banding or the nearly impossible mitered joint. Using the 5/8" RO works well, since plywood thickness varies (and always less than 3/4"), and your method allows the final sand/ blending of the tiny flat spot on the corner trim. Using the oversized corner stock with small chamfers on inner ply edges seems like the foolproof way to work with varying material thicknesses,, as well. Just took delivery of several sheets 'cabinet grade' 3/4" birch and ALL sheets were different thicknesses. Go figure. Your end result is a furniture grade piece with NOTHING super difficult in the joinery...NICE!
@3x3CustomTamar Жыл бұрын
So glad you found it helpful!
@williamsfamilycrafts52272 жыл бұрын
I'm late to your channel and have been enjoying all the content you have been providing. This video in particular is going to save me buckets of tears for an upcoming project I'm working on. It's a great idea and it looks fantastic too. Thank you!
@tuffguy007 Жыл бұрын
Great technique. The end product looks like a cool joinery feature, and not at all like you are covering plywood ends! That is a real trick when using plywood, and very effective here. So well done!
@mauriceryton3 жыл бұрын
Great project. I always use handmade edge banding on plywood as l think it looks more professional. Your decision was perfect as it has enhanced the look and finish of the project imho. Great job, the corners look awesome.
@3x3CustomTamar3 жыл бұрын
Thanks so much! So happy I decided to switch it up and do the corners like this
@eddesanctis80412 жыл бұрын
I love how you try new things. And are always learning!
@steenfraosterbro32683 жыл бұрын
Excellent Tamar. Thank you.
@3x3CustomTamar3 жыл бұрын
Glad you liked it. Thanks!
@dougarcher39763 жыл бұрын
Great video. Great that you explain not only the woodworking processes but the way you’re thinking out the options.
@3x3CustomTamar3 жыл бұрын
So glad you liked it!
@alfonsoPina Жыл бұрын
I just absolutely enjoy seeing your process. You show your process of deciding and problem solving and I like it. I'm learning!!
@jamesmorton7881 Жыл бұрын
I love seeing that you are using DIY level equipment.
@cody808H2 жыл бұрын
Every mans dream. Excellent job!
@kevinbwillson4161 Жыл бұрын
Excellent workmanship craftsmanship Thank your for your helpful lessons your a credit to the world of woodworking
@johnnation713 Жыл бұрын
I love this idea Tamara. I will totally use this round over and filler piece when I use 3/4” or 1/2” or whatever thickness of ply wood all thanks to your informative video!😊👍Thank you so much!👏👏👏👏😊👍
@felixfromnebraska86483 жыл бұрын
An excellent demonstration of this technique. Thanks for sharing, Tamar! Felix
@3x3CustomTamar3 жыл бұрын
So glad you liked it! Thanks!
@adammabe58193 жыл бұрын
You blow me away every single time I watch you, which I need to do more of because watching Tamar = inspiration! You rock!!!
@3x3CustomTamar3 жыл бұрын
Haha awesome to hear
@jackspeer2127 Жыл бұрын
I think the teeny tiny champher shows brilliant craftsmanship. I never woulda thought of that. now I feel smarter.
@3x3CustomTamar Жыл бұрын
☺️
@remkojerphanion46862 жыл бұрын
I like your attention to details, and the fact that you're not afraid to show any mistakes either. Nice, down-to-earth video!
@fmmatty3 жыл бұрын
Wow. What a beautiful and functional way to strengthen those mitered corners. Amazing. I love the experiment with the filler piece as well and will be trying both methods in my projects. Thank you for the video!!!
@3x3CustomTamar3 жыл бұрын
Awesome! Glad you liked it!
@michaelbaykara2322 Жыл бұрын
I must have missed this vid, very informative and a lot of design possibilities- thanks Tamar.
@user-xb4nn6ql5l3 жыл бұрын
As ever, love your work. I think others have said something similar, but I really appreciate you sharing what you tried along the way that didn’t work. It enriches your content immeasurably.
@3x3CustomTamar3 жыл бұрын
So awesome to hear! There’s a lot that goes into all these builds that hard to fit into a 15 minute video. So I’m glad you guys appreciate the super focused videos
@robertbrock26233 жыл бұрын
I can’t keep up with all the cool stuff you bring to the table but I must say, it’s awesome stuff! I can’t wait to try this out! THANKS for sharing Tamar!!
@3x3CustomTamar3 жыл бұрын
Awesome! Haha! Thank you!
@FiscalWoofer Жыл бұрын
Absolutely stunning! In the UK and only wishing I had clients who would want or appreciate this craftsmanship.
@3x3CustomTamar Жыл бұрын
Thank you very much!
@cranstonwilliamsworth96446 ай бұрын
Love your teaching style and presentation, thank you for sharing!
@3x3CustomTamar6 ай бұрын
Awesome to hear
@pmdinaz3 жыл бұрын
Couple of extra steps really adds to the longevity makimg the extra effort worth it!!
@3x3CustomTamar3 жыл бұрын
For sure!
@invictu4488 Жыл бұрын
I used this method to save a display cabinet build couple of days ago - great technique! 👍🏿👍🏿
@williamellis89933 жыл бұрын
Great Idea, Tamar. I like the larger roundover better than the smaller one. Stay safe and keep smiling. Bill
@3x3CustomTamar3 жыл бұрын
Thanks! You too!
@chrisbelmore51552 жыл бұрын
First timer watching your vid . Very nice project I like the hard wood round over and not just The plywood
@tomlymer266 Жыл бұрын
I didn't even know walnut plywood was a thing until I saw this video. All the other stuff was super cool too.
@irvinwittmeier52083 жыл бұрын
I learn something every time I watch and i have been at this lifestyle 45 years hands on !;-)
@3x3CustomTamar3 жыл бұрын
So awesome to hear
@cosmontn1233 жыл бұрын
Great ideas here! The sacrificial piece you temporarily attached when rounding over your corner was another great idea.
@3x3CustomTamar3 жыл бұрын
Thanks so much! Glad you liked it!
@juanpintero3 жыл бұрын
Awesome technique Tamar! Nice finish
@3x3CustomTamar3 жыл бұрын
Glad you liked it. Thanks!
@kenerickson49233 жыл бұрын
I'm also in a walnut ply entertainment project. I made dados and rabbits for the vertical connections. I put a picture frame on the ends to hide the ply edges and also used solid lumber on the fronts.