Intro to Joinery - Understanding the Basics to be a Better Woodworker

Рет қаралды 851,725

Күн бұрын

Huge thanks to reMarkable for sponsoring this video! The reMarkable 2 Paper Tablet has completely streamlined my workflow as I design and build my projects. You can check it out here - bit.ly/3KFc7gi
As always, Thanks to Woodcraft for sponsoring what I do! You can find everything you need to start creating beautiful woodworking projects here -
For more specific items I used in this video… keep on scrolling!
Want to learn more? Check out my website - www.3x3custom.com/
_____
WOODCRAFT LINKS
Dowel Jig:
Pocket Hole Jig:
bit.ly/AutoJigPocketHole
Ryoba Handsaw:
bit.ly/RyobaRazorSaw
Miter Gauge:
bit.ly/2x41joz
Rabbeting Bit:
bit.ly/RabbetingBit
Tongue and Groove Bit Set:
bit.ly/TongueAndGrooveBitSet
Flat Top Grind Blade (FTG) for Joinery:
bit.ly/WoodriverFTGBlade
Dovetail Router Bit:
bit.ly/DovetailBit
Domino:
bit.ly/DominoJoiner
Chisels:
bit.ly/WoodriverChisels
_____
PROJECTS/VIDEOS I DISCUSSED IN THIS VIDEO
Dowel Desk For my son with Plugged Screws:
• Building a Desk Using ...
Dowel Jig:
• Making an ADJUSTABLE D...
Wood Movement Calculator from Jonathan Katz-Moses:
kmtools.com/pages/wood-moveme...
Table with Hidden Spline Miter Joint:
• Waterfall End Table wi...
Box with Brass Splines (Router Table Spline Jig):
• Walnut Tea Box // Bras...
Drill Press Angle Jig:
• Simple Drill Press Tab...
Exact Width Dado Jig:
• Adjustable Dado and Mo...
6 Ways to Cover Plywood (Tongue and Groove info):
• 6 Ways to cover plywoo...
Angled Bridle Joint How To:
• How to Make Angled Bri...
Whole Table build with Angled Bridle Joint:
• How to Build a Dining ...
Tenoning Jig:
• How to Make an Adjusta...
3 Way Bridle Joint:
• Making a Three Way Bri...
Loose Tenon Jig:
• Mini Mortising Jig for...
Alternative methods to a Domino Joint:
• 7 ways to get around N...
Tablesaw Finger Joint/Box Joint Jig:
• How to Make Finger Joi...
Kerfmaker:
• How to Make Perfect Gr...
Box without reinforcements in Miter:
• 5 Quick and EASY gifts...
Record Player Stand with Sliding Dovetail in Base:
• Geometric Veneer Recor...
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/3r3HAC0
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)
0:00 Intro
0:19 reMarkable
2:31 Butt Joint
8:02 Miter
10:36 Dados, Grooves, and Rabbets
13:09 Tongue and Groove
14:08 Lap Joints
16:42 Bridle Joint
18:11 Mortise and Tenon
19:37 Loose Tenon
20:33 Box Joints
21:43 Dovetails
23:06 Sliding Dovetail
24:07 Outro

Пікірлер: 1 800

@birdbandit9 2 жыл бұрын

Are you a teacher? Because your ability to break things down and explain them in a way anyone can understand is uncanny. Thanks for creating your content!

@3x3CustomTamar 2 жыл бұрын

Haha. Nope. Maybe being a mom helps 🤷🏻‍♀️😂

@joberthalib9951 2 жыл бұрын

My thoughts exactly. I love how her style is completely ego free and never condescending. Tamar is great. And as an Oregonian, I love the way she says “drawers”! Awesome accent, so fun to listen to.

@t1n4444 2 жыл бұрын

@@3x3CustomTamar Indeed. Being a "mom" certainly helps. The fact you haven't been obliged to put out a contract on your offspring, aka "oxygen thieves" is a testament to your resilience and equanimity in the face of adversity. Mind you when your issue start bringing their boy/girlfriends home that's another matter altogether. After surviving parenthood anything else is but a walk in the park. I am absolutely convinced you will cobble up plenty of "glulams" or "engineered lumber" items and cobble up a timber skyscraper in your back garden ... just because you can. In fact I've set my heart on it. 😂😂😂😂😂😂

@erinhallmakes777 2 жыл бұрын

Yes, she teaches woodworking on KZfaq.

@leehaelters6182 2 жыл бұрын

@@joberthalib9951, hers is a Lawn Gyland inflection.

@jtmcdole Жыл бұрын

The three-way bridal joint snapping together was chefs-kiss.

@montauked 5 ай бұрын

I was a finish carpenter for 25 years building very high end houses in the Hamptons. I appreciate your teaching skills as well as your woodworking expertise. You are very good at what you do.

@3x3CustomTamar 5 ай бұрын

☺️☺️

@robertapreston4200 3 күн бұрын

Again, after the hundreds oh hours of woodworking videos I've seen, this explains the joinery uses, physics, and procedure beautifully. Thanks 💯

@freddiedoyle472 2 жыл бұрын

There are hundreds of skilled woodworkers on you tube , and this young woman is certainly among the best. But what really sets her apart is how well she presents the information . Clear , concise and with zero errogants ! This is one favorite channels thanks for all you do !!

@3x3CustomTamar 2 жыл бұрын

☺️☺️ so awesome to hear

@willbephore3086 Жыл бұрын

Wholeheartedly agree. No superfluous information, which indicates a rare intellect and dedication - it's very difficult! No bs, which the trades desperately need. And then there's just straight up her skills.

@ptousig 2 жыл бұрын

I've watched a lot of joinery tutorials on KZfaq in the last couple years, this is probably the best one I've seen. It was clear and concise. Bonus points for having a sponsored product that actually looks interesting. I didn't even skip over it.

@3x3CustomTamar 2 жыл бұрын

Haha nice. Glad you liked it!

@whatilearnttoday5295 Жыл бұрын

Buy a chisel, a tenon saw and try some actual joinery.

@whatilearnttoday5295 Жыл бұрын

@@paulbabione4060 Otherwise known as "joinery" ;)

@believitornot9775 Жыл бұрын

@@3x3CustomTamar sure, even me, I like it and want it to do.

@sarahsugarbritches319 Жыл бұрын

Neither did I 😂 I want one

@TimEpperson 2 жыл бұрын

This is probably the most comprehensive description of joinery. It should be included in all woodworking classes ever. It is obvious that you committed a lot of time to this video. Thank you so much!

@3x3CustomTamar 2 жыл бұрын

So glad you think so!

@stevencohen135 Жыл бұрын

Another great video. You are very talented in your presentation. I am math teacher at vocational school who also happens to be a woodworker. I passed this along to the building trades teacher. He does a little cabinet making at the end of the year.

@ThereIsNoRoot 9 ай бұрын

I've seen over a hundred woodworking videos over the years but I've learned more from this one than most of those combined. Phenomenal!

@3x3CustomTamar 9 ай бұрын

Awesome to hear! Thanks so much!

@joberthalib9951 2 жыл бұрын

I’ve been woodworking for 37 years, from green woodworking to full machine cabinet shop, and yet I always learn something from you. You are the best!

@3x3CustomTamar 2 жыл бұрын

That is so awesome to hear. Wow!

@silknfeathers 2 жыл бұрын

Funny, I've been woodworking for over 50 years and am getting a little tired of people showing their limitations on video, then going on to lecture about how it should be done properly...

@joberthalib9951 2 жыл бұрын

@@silknfeathers snoodlepetch gerchaferton.

@misterscottintheway 2 жыл бұрын

@@silknfeathers you might know a lot about woodworking but maybe you could brush up on your being nice

@michaels3003 Жыл бұрын

@@silknfeathers , it's hard for me to believe it you were as good when you were her age. Just a hunch...

@metallumshop 8 ай бұрын

Love the video, you got everything right. No "ums", no annoying music, just the info that is needed, i.e. no blabbering, great explanations, great videography and editing. imo making a quality, enjoyable video is a lot harder than the wooding and you did both very well

@fitzwilliamdarsey 2 жыл бұрын

I'm a self taught woodworker with a lousy teacher. Therefore, I'm constantly searching for informative videos. Yours are some of the best. I always learn something. Thanks, and keep up the great work

@3x3CustomTamar 2 жыл бұрын

Thanks awesome to hear!

@armandcastle73 11 күн бұрын

The most ilustrated Intro to Joinery - Understanding the Basics to be a Better Woodworker. Wow. Just Amazing..!!! Thanks Very much...!!!

@3x3CustomTamar 11 күн бұрын

Wow, thanks!

@mikery2316 Жыл бұрын

It is remarkable how much quality information you were able to share with us in just 26 minutes. You not only educate, but you also entertain. This video was just superb.

@paulcurtis4015 2 жыл бұрын

Sometimes we all need a refresher on the basics. This was really good, thank you.

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@douglasboyle6544 2 жыл бұрын

I think this is only the 2nd time I've ever seen a sponsor spot from a product I might actually use. I actually went to look into the Tablet before I watched the rest of your video 😁

@drewdryden6872 2 жыл бұрын

Same! Think you’ll buy it? It occurred to me that I’m the proud owner of a LOT of paper and still that tablet looks pretty dang awesome!

@Sebastopolmark 2 жыл бұрын

Very well said Tamar. Woodworking is like a computer, there are many ways to achieve the end result All you need is PRACTICE! !! !!! And some good mentors, like yourself.

@3x3CustomTamar 2 жыл бұрын

Yup! Just like anything else! Practice!

@mmoncur 10 ай бұрын

I've done casual woodworking for 20 years and have watched many videos about various kinds of joinery. I seriously understand the whole thing MUCH BETTER after watching this single video. Thanks so much!

@celticcraps 9 ай бұрын

Remarkable. Great summary of many different joinery techniques in one place. Thanks for putting this out there and all the time and effort behind the scenes. Jim

@colinzeta4362 2 жыл бұрын

I love watching your videos just to get reminders on things I forgot.

@3x3CustomTamar 2 жыл бұрын

Nice

@mgurbulak 3 ай бұрын

Amazing content. Most other woodworkers are trying to be funny while they are totally boring and cheesy. Your videos are so full of information and they are still fun to watch. Thank you for producing high quality content. I'm usually into leathercraft and there are so many high quality content available. But for woodworking most of the content is cheesy and full of promotion, clown-like acts etc. You are amazing.

@BentleyDesignCo Жыл бұрын

Tamar you do such a great job of explaining things in a way that makes it easy for anyone to understand! Always enjoy watching your videos - You are so creative!

@oldporkchops Жыл бұрын

I've watched a ton of other videos on joinery and joinery strength tests, but the straw analogy I've only seen on Tamar's channel. Thank you for making this so crystal (visually) clear for us. The visual analogy + actually adding screws and glue to the straws really cemented my understanding of why other joinery techniques might be better. Thanks, Tamar.

@cnoyes98 11 ай бұрын

Yes that made it so clear.

@LanceNYC 2 жыл бұрын

This is the Ashley Book of Knots for joinery, destined to become a standard reference on the subject. Bravo!

@3x3CustomTamar 2 жыл бұрын

Haha nice

@shakoorcornelius4991 Жыл бұрын

Timeless advice. Absolutely the best joinery tutorial I've watched. I've watched dozens and yet I've learnt and understood more from you. Thorough and well presented. Had me hooked the whole 25 minutes. Keep em coming!

@michaeltrosclair5985 Жыл бұрын

Thank you for your videos, it has been a really big help in jump starting my woodworking creativity. I really like how you make your own jigs for just about everything. It helps to simplify things, Huge thanks for how you explain your process, with precision and detailed information.

@RyanKirk99 Жыл бұрын

Such a great video. Concise and informative. Clean audio. No annoying music. Perfect!

@3x3CustomTamar Жыл бұрын

Glad you liked it!

@Kethull Жыл бұрын

Honestly one of the best joinery videos I've seen so far. Thanks!

@3x3CustomTamar Жыл бұрын

Wow, thanks!

@letitiakiu 2 жыл бұрын

I really appreciate such a thorough breakdown, and you make woodworking so approachable! Thank you

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@erikwakefield7705 2 жыл бұрын

This is one of my favorite videos now - thank you!! The scope and easy-to-grasp explanations with examples are perfect!

@3x3CustomTamar 2 жыл бұрын

Awesome to hear

@kevinjohnson4039 Жыл бұрын

I have not watched many joinery videos but I am glad I found yours so early on. Bookmarked this video !!

@peterstim44 Жыл бұрын

I have been in the wood office furniture industry for 38 years and really enjoy your videos. Excellent information in every video!

@versatileduplicity9313 Жыл бұрын

Damn. Ok Og 😂

@TubeDude78 2 жыл бұрын

Thanks so much for this fantastic video. Such a good primer on the topic. I passed it on to a young woodworker who is just getting started. This is going to be my recommended go-to guide for anyone starting out.

@cjohnston 2 жыл бұрын

Amazing! Just enough detail, packed with information, but also quick. Love it and I’ll save this as a reference for a long time.

@3x3CustomTamar 2 жыл бұрын

Nice.

@thomo74 2 ай бұрын

Outstanding video ! You’ve just reignited my passion for woodworking! Thank you !

@PVS3 2 жыл бұрын

Commenting to feed the algorithm. This depth of knowledge AND humility, on top of your remarkable teaching ability [chef's kiss]

@Jaydcoke 2 жыл бұрын

I now manage and run a non-profit woodworking makerspace and this video is perfect for a lot of my members, many of whom have basic woodworking skills. This is a great video that helps them understand joinery better and sets them on the path to trying new things out. Thank you so much for this and all your amazing content.

@felixbelanger2659 2 жыл бұрын

15:36 You could also remove the blade thickness from your first shim, in some cases it might be easier! Great video with lots of good info

@nomercadies 6 ай бұрын

Love the Bourbon Moth Slide.

@michaelbradford4444 2 жыл бұрын

A must see for woodworkers of all levels !

@3x3CustomTamar 2 жыл бұрын

👍👍

@onhandart 2 жыл бұрын

This is the best joinery reference I've seen. You actually taught me the "why" behind different joinery methods, which no one has so far. If you put out a shop reference, I'd buy it!

@3x3CustomTamar 2 жыл бұрын

Awesome. Once you understand the why, it all clicks!

@TheKobiDror 2 жыл бұрын

@bourbonmothwoodworking also made a joinery video and made load tests. He found out that the simple mighter joint was the 2nd best in performance. Seems like cutting a 45° angle at the butt end significantly strengthened the joint.

@amydpnw 2 жыл бұрын

He also determined that the mitre joint with the spline was far stronger than a lot of other ones.

@ABaumstumpf 2 жыл бұрын

And also second most likely one to get loose without any force applied (after a longraing-to-endgrain butjoint). Use better joints.

@spdcrzy Жыл бұрын

That signature is DOPE.

@rabidscallion9947 2 жыл бұрын

OMG... about 15 seconds into reMarkable sponsor I already purchased. THIS is what I've been looking for for soooooooooooo long. Thank you so much!!!

@nickburak7518 2 жыл бұрын

First of all, I love your channel. I've learned a lot, like how to make a portable mft table. Now, about the gluing science. I would highly recommend the host and the viewers alike review what Patrick Sullivan has to say about glue myths in his scientific research into the matter. I dare say that he is THE woodworkers professor that we owe ourselves to learn from. Also, his above par designs are usually available for free download. If you've made it this far in the comment, and you'd like the TLDR: he says that perfection in miter joinery (not more than 0.25 of a degree) is key for glue strength.

@ABaumstumpf 2 жыл бұрын

Yeah, or just using a stronger joint to begin with.

@nickburak7518 2 жыл бұрын

@@ABaumstumpf What joint do you suggest, a tenon joint? Btw, have you checked out the Patrick Sullivan video? As for me, I'm a total noob, so I value the options of those more experienced than I. Everything I do is challenging and time-consuming - it's hilarious. But there some improvement. Lol

@ABaumstumpf 2 жыл бұрын

@@nickburak7518 "What joint do you suggest, a tenon joint?" None - cause there is no "best" joint as each has their own pros and cons. But one thing can be said: Avoid buttjoints - they are the weakest joints by far.

@HardKnockDesignandBuild 2 жыл бұрын

And another solid video. Thanks Tamar, just starting my journey, and absolutely been loving your content. I was just thinking to myself, how much I needed a better way, other than pencil-and-book-in-my-back-pocket, style. That thing looks awesome! I'll for sure snag one! How well does it do with drawing? My oldest daughter is huge into drawing.

@3x3CustomTamar 2 жыл бұрын

So glad you liked it! So it’s not really meant for drawing as much as it is note taking. Like it’s for quick sketches and keeping yourself organized. That being said, my daughter who loves to draw has been playing with it too… ha

@bloodgain 2 жыл бұрын

My daughter draws on her 2-in-1 PC, an Acer Spin 3, that has an active stylus. It's similar to what a lot of digital artists have been using for years. Whatever you get for someone doing drawing, you want a pressure-sensitive pen, as that lets them draw more like with traditional media. A lot of artists love using the Apple iPads and Samsung Galaxy S tablets for that, as they're high-quality and the "pens" for them are very good.

@shanonearls6945 Жыл бұрын

@@bloodgain wow !! Thanks for this !! An amazing bonus to this fantastic video ! Very needed for the next birthday gift I was about to have to research !

@bloodgain Жыл бұрын

@@shanonearls6945 I'm glad my random comment helped somebody!

@UFOHUNTERS2 3 күн бұрын

you are good fine woodworker .. far better than lots of dudes on you tube... thanks for helping those rookies..

@jesselove3715 3 ай бұрын

been watching woodworking videos for over a year and there were some jaw dropping "ooooooh" moments here. thank you!

@between-the-espressos 9 ай бұрын

I love it when you show your b-rolls with the Dewalt saw. It makes it more approachable than the SawStop. I also like to hear you say “drawers.” It is the only time I hear your original regional accent. My son says mine comes out when I say “fifteen.”😂

@3x3CustomTamar 9 ай бұрын

Haha my kids make fun of me when I say “sauce”

@quargr 2 жыл бұрын

Really great video and survey of different types of joints. The straw thing was really illustrative, great job! One thing I would add is (at least my view) dowels are also a type of loose tenon, so should be included in that group. As to the doweling jig, never a fan of self centering versions (thought can be very useful in other situations)because I found out that wood from the home center (in my early experience), even plywood, was not quite the same thickness so both sides of the piece needed to be sanded (or whatever) being very frustrating early on. Only once I got myself a Dowelmax (not advocating for a specific brand, just suggesting a "precision" doweling jig) did I get the results I was looking for minimizing work. Additionally, one thing to note regarding applying some type of loose tenon as compared to more conventional mortise/tenon is the wood cost can be quite a bit less (no need to buy more wood to accommodate the joint) that today can be significant cost saving making using more expensive woods a bit more accessible. Lastly, a Domino is not the only option for automation of the loose tenon process, something like a Mafell ddf 40 has much the same function as a Domino (except using Dowels) at almost the same price. Not going to get into pros/cons as each has their strengths. Just saying other options exist. Great job!

@lumberjill6598 2 жыл бұрын

I found there's a little learning curve to self centering dowel jig. I build live edge table tops, which usually involves putting 2-3 pieces of wood together. I lay my pieces together and put a piece of tape on the top to identify it's the top and if its front, middle or back. Then measure/mark each dowel placement, always measuring off the same side (usually from the right side for me). Next I clamp the board in so the top side (with the tape on it) always faces me. So if there's any inaccuracies in the jig, your dowel pins will still line up.. Does this make sense? Nothing more frustrating than when your seams don't line up right.😡

@quargr 2 жыл бұрын

@@lumberjill6598 Thanks for the tip! However, what I'm talking about is not so much inaccuracy in the jig (your suggestions factoring the variability out), but the slight inconsistency in thickness of the pieces being put together. What I am saying is that in my experience two pieces even having very slight differences in thicknesses (like taking a longer board that has been jointed and planed being cut down to form a wider board, the planning process not being perfect) create a very slight ridge on both sides of the glued piece based on the centering nature of the jig, just causing more sanding and flattening. Depending on the degree of "ridge", the resulting work can be quite extensive. What I'm suggesting is a precision jig mostly eliminates the issue (or at least moves the issue to one side of the glue up) by measuring/offsetting from one face allowing the face not having the exact offset to be treated more aggressively, often with less work. For example, if gluing up a cutting board (this is just an example, as you may not need to use dowels at all) one face will be almost perfectly aligned, only needing light sanding. The other side can be planed then sanded. In the above example I'm just dealing with boards that are edge glued for illustration, but where I find a precision jig most important is when butting up two board (face frame, table top skirt, whatever) end grain to long grain, where you want the joint to be exact. This is where a precision jig (and an exact offset) really shines because the differences in board thickness are not really at issue (and can be factored out!) making life much, much easier. All I am saying is in my experience precision jigs can be worth the money ($200-300) having their values in confidence, precision, time, less wasted material, and less time (and things like sanding) that can greatly reduce frustration.

@lumberjill6598 2 жыл бұрын

@@quargr Agreed. Speaking of precision, I always wondered why people spend so much money on straight edges and squares, like from Woodpecker. Until I found my square (off the shelf from local hardware store) wasn't square anymore. Talk about frustrating! As my skill level increases, so does the price and quality of my tools! 😁 Thanks for the conversation Robert, have a great day!

@quargr 2 жыл бұрын

@@lumberjill6598 Hi, Ya, the measuring and layout tools can be very expensive when you move into the likes of Woodpecker, often as expensive as some equipment (perhaps more) so see why beginning people skip the expense, at least initially. Some less expensive options exist but are generally not considered as "robust" as Woodpecker, though may be good for those beginning. The blemished/cosmetic seconds of PEC combo squares over at Taytools is a good example. Also, when it comes to Woodpecker, depending on the tool(watch out), you can get a lifetime guarantee, so I assume the cost of the tool includes the possibility of replacements/adjustments over the tools lifetime. To any "new" woodworker, in my view, I would suggest one or two of the more expensive marking/measuring tools as it is more than just marking and measuring your layout, it is as much or more about tool alignment, even needing to do so for power tools right out of the box! Nothing worse than from day one wondering why boards won't quite come together, being off that little bit. Even trimming that little bit still finding the cut is just not quite square. Wow, frustration! The first thought (and wasted time) is you are doing something wrong relying on the reference tool to be straight or square, the reference tools not quite being straight or square over its length. Basically, a few good reference tools can go a long way toward avoiding the frustration of other tools being out that little bit, often making some of the less expensive power tools just a joy to use...as long as they last, or indicating that the purchased tool should be returned pronto. I appreciate the dialog.

@sineadtobin7711 Жыл бұрын

I took wood work in school. Think I learned more in this video than the 3 years of 3.5 hours a week. Great video

@3x3CustomTamar Жыл бұрын

Haha nice.

@believitornot9775 Жыл бұрын

I hope and pray to fulfill these methods of woodworking.

@bnelson313braveheart8 2 жыл бұрын

Joinery is such a great way to add beauty and strength to your projects.

@3x3CustomTamar 2 жыл бұрын

Yup 👍

@bbutcher112 Жыл бұрын

More of these wood working basics please!!

@josephschulte9672 Жыл бұрын

Mad skills yo. I shared it with my Construction 2 class this quarter... Joinery practice and this is going to work out great. Some of them fell asleep but they lack intestinal fortitude. One kid was playing Tetris and I think he felt pretty bad about that because he really likes this stuff it's just China writes these algorithms to suck kids into stupid flash games and he fell prey. Seriously, you are an EXCELLENT teacher; you don't need a classroom for that.

@kullenschreifels864 Жыл бұрын

I was playing tetris but i'm going to practice with the dowel, rabbet, and mitre joint though.

@bobdove6068 2 жыл бұрын

I’m a hobby woodworker and when I read the comments it’s amazing how many viewers have 15 -25 years experience yet still give very positive feedback. I agree, you are an excellent teacher and so easy to listen to. Thanks. ( from Australia)

@3x3CustomTamar 2 жыл бұрын

☺️☺️👍

@kenvaillancourt2536 2 жыл бұрын

I really like that sliding dovetail

@jrosner6123 Жыл бұрын

My favorite aspect of your tutorials is that you get straight to the point, and emphasize all of the right info. Perfect teaching style, helps a bunch!

@3x3CustomTamar Жыл бұрын

Awesome to hear!

@fluffycenter9242 Жыл бұрын

The Best joinery video in the world.... great job!!

@3x3CustomTamar Жыл бұрын

Glad you liked it!

@SlyNation Жыл бұрын

A lot of info packed into 25 mins...It breaks down all the major joinery techniques, why they are used, and how to create them. Quick, to the point, and thoroughly explained. Good job M'lady!

@SawdustmakerLori 2 жыл бұрын

Great information Tamar and as always you explain everything so well. Thanks for taking the time to do this!

@cian.horgan 7 ай бұрын

I loved that last note on dovetails, admitting the limit of what you know rather than making up something to fill space or repackaging someone else's idea without experience with it

@j.dacosta331 2 жыл бұрын

You did all the joints the best way there is Keep up the good work Bright Girl

@3x3CustomTamar 2 жыл бұрын

👍

@tomrorer5288 Жыл бұрын

Outstanding teacher, I always learn something when I watch. Thanks.

@joshuaryansantos3917 Жыл бұрын

I'm glad i found this video. I'm in for an interview for a company that uses joinery and I hope I will nail the interview and exam. Thank you for this.

@3x3CustomTamar Жыл бұрын

Haha good luck!

@ustupidass6921 6 ай бұрын

I've watched many videos trying to understand the joints but no one explained it like you did. To have knowledge is not equivalent to being able to impart it. You clearly have the knowledge as well as the skill to impart it. Thank you.

@SuperCC112 11 күн бұрын

This and your videos on woodworking are some of the best i have seen in a Long time! so awesome

@ticklefritz5406 Жыл бұрын

I thought I was the only one that liked Nada Surf. I can tell you did your homework, great video!

@joshuaespinoza534 Жыл бұрын

I decided to subscribe to your channel because you're a highly intelligent person. I'm new to woodworking and your channel is one I'll be binge watching and learning from mostly. Thank you for passing on your wisdom!

@3x3CustomTamar 11 ай бұрын

Awesome to hear!

@JonPrevost Жыл бұрын

Fantastic video! Glad the algorithm got me here. You must be a teacher. If not, the worlds loss.

@3x3CustomTamar Жыл бұрын

Haha. Nope. Just a mom

@JGV_IX Жыл бұрын

Another great video!! Your videos are an incredible contribution to our craft and the woodworking community!

@freethoughts2898 4 ай бұрын

Best joinery video on KZfaq by far. We want to learn the theory behind it not just how to do it. We want to learn why, and you taught us that. Thank you!!! I would literally take classes from you haha

@MalaMala-os2no Күн бұрын

such a fantastic and comprehensive video

@pe00100 Жыл бұрын

Excellent overview!!! Thanks for putting this video together!❤

@jut7030 2 жыл бұрын

i've watched hundreds of woodworking videos but i still learnt so much from this, thank you !

@3x3CustomTamar 2 жыл бұрын

Awesome!

@DessieTots 2 жыл бұрын

Your straws analogy is genius.

@3x3CustomTamar 2 жыл бұрын

Glad you think so!

@rickdoolin9109 Жыл бұрын

I am with the other newbies to woodworking/joinery commenting below, your knowledge and presentation is waaaaay above excellent. You are my go to channel from now on Tamar. I thankyou for sharing your knowledge. Love the fact that some pro's have commented and given you the thumb's up. I am a retired Plumber who is now a wannabe woodworker/joiner. Merry Christmas to all, from us Aussie's, to the rest of the World.

@3x3CustomTamar Жыл бұрын

So awesome to hear!

@keithforster2615 2 жыл бұрын

I absolutely love your channel. This video brilliantly explains joinery, in a way I have never seen anyone else do it before. Thank you so much.

@FamilyMentors Жыл бұрын

You do such a great job presenting your sponsored content! The Remarkable promo was every bit as interesting as your content. Thanks!

@3x3CustomTamar Жыл бұрын

Awesome to hear!

@brendasmith1533 10 ай бұрын

Wow, ReMarkable looks so awesome! I'm definitely the pen and paper type girl and never knew this existed! Thank you!

@TheHumbleCarpenter Жыл бұрын

Just found your channel and absolutely love it!!! Absolutely love the educational nature of it. I’m just getting into woodworking and it’s been so helpful!! Thank you!! Please keep the educational/explanatory videos like this coming!! 😊👍

@jrosedds42 2 жыл бұрын

WOW!!! If ever a video needs to be bookmarked, this is the one!

@3x3CustomTamar 2 жыл бұрын

Awesome 👍

@blakerepka4077 Жыл бұрын

Great video! Very informative, and you kept the viewers interested. IMO Thanks!

@johnd4717 2 жыл бұрын

You're such an amazing person Tamar, even I as a non woodworker fully understand how to make things easy with woodworking. Keep upm the good work! Have a great day!

@Winteryears Жыл бұрын

Love your vids. You're a natural at imparting knowledge. Thank you.

@sapulpaorganics5402 5 ай бұрын

Very refreshing to see such an intelligent and knowledgeable lady who is into woodworking as much as I am. I really enjoyed watching and look forward to seeing a LOT more!!

@NotECraig Жыл бұрын

Simply one of the best woodworking videos I've seen. Really looking forward to exploring all of your videos. Thank you!!!!

@ericolson6135 6 ай бұрын

GREAT choice in music. Thanks for posting this ... your instruction and delivery is awesome.

@3x3CustomTamar 5 ай бұрын

☺️☺️

@rusburns1714 2 жыл бұрын

Awesome video Tamar! I love the way you embrace the fundamentals & show how to creatively use them in beautiful projects.

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@skampp 2 ай бұрын

Hey thanks for giving so many options for how to make each single joint type, much appreciated having a somewhat limited tool set! Best video that woodworkers don't really want to watch (but should).

@pauperrim8946 Жыл бұрын

I casually saw that thing to put the box of the vinyl that's on the player. What an amazing idea! And what an amazing album btw :)

@chriskelvin248 Жыл бұрын

What I like best about your work is that you make the most of your tool set based on solid principles and techniques. Instead of sliding down the slippery slope that more, newest, expensive tools is the way to go. It tempers our urges to acquire with the realization that we already have what we need!

@johnlorefice8762 Жыл бұрын

Great job! You made all joints look easy and fun! Bravo!

@MatthewEncina Жыл бұрын

Thank you for compiling all of this in one place! Very helpful!

@laurencelance586 2 жыл бұрын

This may be THE best explination with a physical example of joinery that I've ever seen. WELL DONE!

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@laurencelance586 2 жыл бұрын

@@3x3CustomTamar It's obvious that you put not only a lot of work into this presentation but also, and maybe most importantly, a LOT of thought. As mentioned, exceedingly well done!!

@Jpres Жыл бұрын

Great video as always! Thanks for sharing your knowledge with us Tamar!

@bryanstellfox8521 Жыл бұрын

I've always felt that being able to explain things as if speaking to a five year old is a HUGE talent. Mostly because I'm an idiot, but also because people tend to make things unnecessarily difficult when teaching...kind of a low key flex type thing. I love your channel, I love you, thank you so much for the free content!!