6-IN-1 TRIM Router Jig - freehand routing, inlays, edge-banding, mortises, dados, circles & more!
Рет қаралды 1,240,135
Күн бұрынThank you to HelloFresh for sponsoring this video! Use code 3X3CUSTOM10 to get 10 FREE MEALS across your first 4 HelloFresh boxes, including free shipping on your first box at bit.ly/3gTJCOK
Click here to download the TEMPLATE and PLANS - www.3x3custom.com/store/ultim...
For more details, check out my website - www.3x3custom.com/tutorials/u...
Router Edge Guide I used to make this jig - • Easy and Accurate Rout...
____
AMAZON (affiliate) LINKS
Acrylic Sheet (it ended up working fine even though it was undersize...):
amzn.to/39syoNM
Jig Hardware Kit:
bit.ly/MustHaveJigHardwareKit
Router:
amzn.to/3spexHZ
V-Groove Bit:
amzn.to/2N4t8Zg
1/4" Router Bit:
amzn.to/3qpoFPh
1/2" Router Bit (This one has full-width blades so you can plunge and make a clean bottom):
amzn.to/2XSyOb3
Forstner Bit Set:
lddy.no/my5u
Alternative to Jig Hardware kit:
amzn.to/3FgyqHE
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)
0:00 Intro
0:25 Applying the Template
1:33 Preparing the Template
4:02 Drill the Holes
5:18 Route Out All the Grooves!
6:48 Cut Pieces to Size
7:22 Drill Holes for Your Specific Router
10:59 Ad Break!
12:52 Attach Handles and Router
13:51 Freehand Routing Control
14:25 Flush Trim Inlays
16:41 Flush Trim Edge Banding
18:42 Make Mortises, Grooves, and Dados
20:07 Extend the Base
21:26 Circle Cutting!
#woodworking #routerjig
@3x3CustomTamar 2 жыл бұрын
*You can now purchase this jig ready made on my website!* No need to make it yourself anymore! www.3x3custom.com/store/6-in-1-universal-trim-router-jig
@patsipes6561 2 жыл бұрын
When this video first came out, I said it would be nice to be able to just buy this and Tamar hinted that something might be coming. When it was announced I immediately pre-ordered it. It arrived a few days ago and it is everything I hoped it would be. My router work is going to make a giant keep forward. Just fabulous!
@patsipes6561 2 жыл бұрын
@@Bay444444 I have the Dewalt dwp611 and it fits perfectly. I didn't try the plunge base but I have no doubt it would fit perfectly. Did you print the colored template? Be sure you set the template at the correct size before printing.
@patsipes6561 2 жыл бұрын
@@Bay444444 did you hold up the template to the jig? Are there wholes on the template that are not on the jig?
@Bay444444 2 жыл бұрын
@@patsipes6561 just wanted to let you know problem resolved - the template I printed has been changed/updated from the one that was first available on the day it was released for sale (when I purchased) to the one now available. Using current works with my Dewalt. Thanks for your comments.
@patsipes6561 2 жыл бұрын
@@Bay444444 Glad to hear it is solved.
@michaelsizersanctuaryfenci1614 3 жыл бұрын
I've thought many times before "she is really creative when it comes to designing jigs" but this one impresses me even more than usual. I salute you on your talent.
@3x3CustomTamar 3 жыл бұрын
So awesome to hear ☺️
@youtukang 3 жыл бұрын
😊😊
@reid211 3 жыл бұрын
I’m new and I can’t stop rewatching these videos she has made. The explanations and the use of the tools are so innovative. I mean it’s like “a-ha” and “oh I see” over and over again. Such a great series of videos. 👍🏽
@jimhannah6235 3 жыл бұрын
@@reid211 Qi I wish all my teachers were as good at teaching and as attractive as her. Thanks for everything. Jim
@AndrewJohnRevell2017 3 жыл бұрын
@@reid211 I agreed 👍🏼
@jamesrohrbach9147 3 жыл бұрын
First, this is the coolest, most "why didn't I think of that" jig I've seen. It should be patented and brought to market. Second, your "I'm not a professional and don't pretend to be" presentation is refreshing. Your willingness to experiment and try something new on camera regardless of the outcome is inspiring to the rest of us. You are fearless. Keep up the great work and look forward to the next video.
@3x3CustomTamar 3 жыл бұрын
So awesome to hear! Glad you like it and my videos ☺️
@MrMaacin05 3 жыл бұрын
This one seriously should be brought to market. It’s incredible
@tedz2000 2 жыл бұрын
I’ll invest
@steverochon1620 Жыл бұрын
I don't think I've ever watched a video of yours that disappointed me. Good teacher, clear and to the point. I always seem to learn something from you. Nice work!
@3x3CustomTamar Жыл бұрын
Wow, thank you!
@sgtcrtrdnl 2 жыл бұрын
this is by far one of the best home-designed jigs ive ever seen. very well thought out. great job!
@64maxpower 3 жыл бұрын
One day your kids when your get old enough to realuze it, they are going to be amazed with you as we are. Holy Crap Tamar. You made something so difficult to be super easy. Thanks.
@3x3CustomTamar 3 жыл бұрын
☺️☺️ I’ll show this to them when they are teenagers. Ha!
@sivacrom 3 жыл бұрын
Another brilliant and ingenuitive creation from one of my favorite creative and inspirational wood workers!
@3x3CustomTamar 3 жыл бұрын
So awesome to hear! Glad you liked it!
@SonofDaVinci4 2 жыл бұрын
I've been binge watching jig creation videos for some days and find that yours is elegantly simple, highly functional and the best. Many videos create great jigs but they are non-versatile monstrosities. Thank you for another great idea!
@3x3CustomTamar 2 жыл бұрын
So awesome to hear! Thanks!
@jamesprickett2471 2 жыл бұрын
“Dishes are done man!” From “Don’t Tell Mom the Babysitter’s Dead”. Love it. Great jig.
@GyWO10 3 жыл бұрын
Wow, this is one of the coolest jigs I’ve ever seen!!! Can’t wait to make it & use it on future projects! Thanks so much for helping out novice woodworkers like myself! 🙏🏽🙏🏽
@3x3CustomTamar 3 жыл бұрын
Awesome to hear! Hope it works out for you!
@64maxpower 3 жыл бұрын
Tamar is helping more than novices. She is easily one of the best I've ever seen as she simplifies difficult things.
@k9insomniac783 3 жыл бұрын
I appreciate the time, money, and energy that goes into these videos. Being a parent is hard enough, let alone making instructional videos. This is one of the very few wood working channels that I watch. Clearly stands apart from other how to videos.
@3x3CustomTamar 3 жыл бұрын
That’s so awesome to hear. I’m glad you appreciate and understand all the hard work that goes into it. It’s a lot! I really appreciate you taking Time out of your day to let me know!
@FormerlyKnownAsAndrew 2 жыл бұрын
So amazing that you conceptualized all of these features in your head, figured out how to integrate everything and built it too. I really love this. I will make this if I can source some fairly priced acrylic.
@3x3CustomTamar 2 жыл бұрын
It was definitely fun to figure out 👍
@carr869 2 жыл бұрын
Well done. I like the way your mind works. I’ve been a carpenter for over 45 years. Thank you for taking the time to make and share this video with us.
@3x3CustomTamar 2 жыл бұрын
Glad you like it!
@recloakedworkshop 3 жыл бұрын
Amazing on two fronts. 1 brilliant jig. 2 best sponsor placement I’ve ever seen 😂
@HBSuccess 3 жыл бұрын
Much better than the WD-40 garage door grease. 😂 But that was fun to watch too.
@3x3CustomTamar 3 жыл бұрын
Hahaha! Thanks so much! 😂😂
@3x3CustomTamar 3 жыл бұрын
😂😂😂 too funny
@DumbfoundedMadman 3 жыл бұрын
"I'm right on top of that Rose!" Great jig; thank you for this. I'm excited to make one.
@3x3CustomTamar 3 жыл бұрын
You got it! Awesome
@kevinjackson5191 2 жыл бұрын
That…..is….awesome. It’s the gift that keeps on giving, because if you buy the plans you get to practice your routing skills whilst making the jig to help improve your routing skills. Thanks for bringing your amazing skills in such a teachable and friendly way. 👍
@Fenix8452 3 жыл бұрын
As a VERY beginner woodworker (but learning quickly) I love your channel here. After watching this video I figure I probably could mimic it well enough on my own to get basic functionality, but when I saw the extremely reasonable price I opted to help support you instead and bought your template and plans, both for having an excellent guide and as a thank-you for all the helpful instructions you record for us. Keep up the great work. Us novice woodworkers appreciate it.
@3x3CustomTamar 3 жыл бұрын
Thanks so much! I really appreciate the support!
@didierleclerc66 3 жыл бұрын
Can't get enough of your smile !!
@joeforster5503 3 жыл бұрын
Extremely useful and awesome! I can see adding various strips on one side to make relative size and spacing dado's at the same time. I have been thinking about how to build a flush trim jig for edge banding for some time- now I have a plan! Many thanks!
@3x3CustomTamar 3 жыл бұрын
Awesome! Glad it was useful!
@suesullivan8775 2 жыл бұрын
I’ve just come across your channel and I’m hooked! I’m a ‘have a go’ 55 year old woman and I plan to try and make my own alcove cupboards in my new Victorian home. I don’t feel so intimidated after watching you, thank you and keep up the good work 😊
@cthepower 3 жыл бұрын
It is so very kind of you to share your knowledge. This to me is what the Internet is for. I love that you share your knowledge with such great detail and enthusiasm.❤️
@3x3CustomTamar 3 жыл бұрын
Glad you like it
@tjdreyer 3 жыл бұрын
This is brilliant, and that straight edge guide was a winner too.
@1i1e36 3 жыл бұрын
I really like this It looks like something Rockler would be interested in making and selling. They work with makers like yourself to produce and promote good ideas. I would sugest you contact them.
@3x3CustomTamar 3 жыл бұрын
Thanks! So glad you liked them!
@cindy20115 3 жыл бұрын
You’re so talented lady , thank you so much for sharing this , yesterday I was looking for something like that and I was frustrated didn’t find anything, this morning notes came new video ,and Voala 🥰
@3x3CustomTamar 3 жыл бұрын
Awesome! So glad it’s helpful!
@blaugrana-jw3dd 3 жыл бұрын
Voilà* please😂😂😂
@jpreston9212 3 жыл бұрын
Such a GIFT! Ordered and printed immediately after watching. Your videos are excellently done, and are only surpassed by your woodworking skills. Thank you Tamar!
@3x3CustomTamar 3 жыл бұрын
Awesome! Good luck with it!
@melindaford5080 2 жыл бұрын
Wow! I finally made this jig and am amazed at how much more control I have with my router. Game changer!
@3x3CustomTamar 2 жыл бұрын
Awesome!
@harvindersingharora3845 3 жыл бұрын
Simply Awesome! Keep inspiring with such innovative ideas!
@timmilne21 3 жыл бұрын
Awesome jig! "Dishes are done man!" Don't tell mom the babysitters dead. I use the quote all the time lol
@3x3CustomTamar 3 жыл бұрын
Haha me too! Thanks!!
@1100mrjohnson 3 жыл бұрын
I say that all the time!
@jimwarrer5612 3 жыл бұрын
I'm right on top of that Rose!
@bojidarstefchev3214 3 жыл бұрын
Amazing project!You are soo sweet girl with great skills!
@wolfslayer44 Жыл бұрын
I am utterly fascinated by your creativity for these jigs. I mean it in no disrespect. I have to rewatch these videos a couple times because there is just soo much information my feeble mind cant grasp it at once. I commend you for helping out individuals such as myself by providing this amazing content
@3x3CustomTamar Жыл бұрын
So glad you like them!
@mohameddanish4897 Жыл бұрын
Love the enthusiasm and passion you have for your art. Thank you for sharing.
@RADCOMJ1 3 жыл бұрын
"Tamar the Jig Maker".... love it looks like fun driving😊.... I'm I. T. we live in the basment with no windows.
@3x3CustomTamar 3 жыл бұрын
Haha! It is fun!
@gsterneman 3 жыл бұрын
And henceforth she shall be known as. . . 😅
@ParleysWoodedJourney 3 жыл бұрын
Don't tell mom the babysitter's dead. I love that line and my kids think I'm crazy.
@3x3CustomTamar 3 жыл бұрын
Hahah! You got it! I loved that movie so much as a kid...
@Mrsdanidenise 3 жыл бұрын
“Right on top of that Rose!”
@jbn0613 Жыл бұрын
Your creativity and workmanship never cease to amaze me. Good for you!
@dillonprentice1968 2 жыл бұрын
Amazing jig, honestly by far the best channel on KZfaq for helping people get around buying expensive equipment and still making quality items. Between this and the instructions for jointing without a jointer you seem to amaze me with every video. Keep up the good work, I love the instructional videos
@3x3CustomTamar 2 жыл бұрын
So awesome to hear! Thanks!
@AniDuBes 3 жыл бұрын
I say that quote from "Don't Tell Mom the Babysitter's Dead" every time I do the dishes. My wife just rolls her eyes. :)
@3x3CustomTamar 3 жыл бұрын
Hahah! I say it too...
@AndyFromBeaverton 3 жыл бұрын
2:33 I've got to make that straight edge. How useful.
@3x3CustomTamar 3 жыл бұрын
Yes! It’s the best
@stephenlee3642 3 жыл бұрын
Come on, THIS is incredible! Great design, well throughout, simplified, and feature rich. Much props Tamar.
@3x3CustomTamar 3 жыл бұрын
Glad you like it! Thanks!
@blueclaus 2 жыл бұрын
Hallo Tamar, I love your way to explain all the complicate things. You make our craft easier. Sorry about my german english. 😊 Keep it up, Tamar. Claus from Bremen (North-Germany)
@jowallace-blaker8202 3 жыл бұрын
This is amazing. The router is one of the tools I'm the most scared of using because I always mess up. I am going to try this....once I buy myself a battery palm router. Thank you for sharing
@3x3CustomTamar 3 жыл бұрын
Have fun with it! The router is the most versatile in my opinion. Use it on EVERYTHING
@a0flj0 3 жыл бұрын
Doesn't have to be battery powered. A router on a cable is just as good.
@cdouglas1942 3 жыл бұрын
Once I got my Ridgid 18V compact router my hard-to-adjust DeWalt went up for sale
@jowallace-blaker8202 3 жыл бұрын
@@cdouglas1942 living in the UK means we don’t get the pleasure of having Rigid tools over here. Wish we did as they look awesome
@vmitchinson 3 жыл бұрын
Isn't that a makita she is using. I'm going by the colour.
@AtPompeii 3 жыл бұрын
Gosto muito do seu canal, é show!!
@skigglystars9525 3 жыл бұрын
Time savings and design brilliance. Excellent build!
@95Gabe 3 жыл бұрын
I wish a large network would sign you up for a proper woodworking show. You are the real deal. Your channel has probably helped my woodworking progress more than all the others combined. I can't thank you enough.
@3x3CustomTamar 3 жыл бұрын
I actually turn down all tv offers. Not what I want. I’m happy to share this stuff on my terms on here 😉
@RealMangaAddict 3 жыл бұрын
Just purchased your plans, can't wait to make this. Thanks! Btw if you want to make a 4" hole, measure 2" from the center.....not 4 lol
@wilfredoreyes4617 2 жыл бұрын
Just curious, how did building her jig work out 4 you?
@RealMangaAddict 2 жыл бұрын
@@wilfredoreyes4617 It's come in very handy and a great addition to my workshop. Takes a bit of getting used to for certain uses though. For instance, it's much easier to route grooves with a circular guide than a straight one, the slightest shift and everything's messed up.
@wilfredoreyes4617 2 жыл бұрын
@@RealMangaAddict Hey thanks for replying to my question. It's very difficult to aquire certain materials here on the island. May I ask if you feel this jig is cost affective?
@RealMangaAddict 2 жыл бұрын
@@wilfredoreyes4617 I can relate, I live in the Caribbean and it’s impossible to find the acrylic here, I ordered it from the US. I do find it very helpful, but it definitely depends on whether you have uses for it or not. In my case, I have a small wood working shop and no router table so it helps alot. Especially when I can set the jig and make repeat cuts
@simonhale1196 3 жыл бұрын
Sponsored segment starts, and I'm not even mad. That was beautifully set up.
@3x3CustomTamar 3 жыл бұрын
Hahaha! Glad you like it!
@AlexMartin-dx4bp 3 жыл бұрын
So well done infact that I decided to check out the offer, not available in the UK 😭
@3x3CustomTamar 3 жыл бұрын
@@AlexMartin-dx4bp oh man...
@tajmahal3466 2 жыл бұрын
Tara! You are indeed a revelation. Love your work, skills, ingenuity and humility. Need a few more guys to follow your lead.
@3x3CustomTamar 2 жыл бұрын
Thanks so much!
@anway1953 3 жыл бұрын
This is Brilliant! Love your straight forward no nonsense explanations as to what you are doing and why. So cool that there is so much versatility! Can't believe anyone would downvote this they are obviously jealous of your creativity. You should have millions of followers.
@3x3CustomTamar 3 жыл бұрын
Glad you like it! Thanks! Eh. Can’t win em all. Ha!
@craigjsanderson 3 жыл бұрын
Great vid!! A tip I heard a while back is to take a photocopy the underside of things (like the router) this will give you a template you can use for drilling holes - also great for mounting extension leads to the wall...
@3x3CustomTamar 3 жыл бұрын
Thanks! That’s a cool tip!
@gsterneman 3 жыл бұрын
I've used that trick many times. Just make sure that you're not getting any scale changes between the pic and the print. I will place a ruler next to what I'm photographing for reference.
@richs5422 3 жыл бұрын
Copiers are specifically designed to NOT copy at 100%, so that one can't copy money well enough to use in a vending machine. But, sometimes it's close enough.
@richs5422 3 жыл бұрын
@kieran finney Huh, guess I'm out of date. Thanks.
@davewatchedthat 2 жыл бұрын
@@richs5422 Refreshingly mature to see in the comment section....lol, congrats on being a grown-up in the playpen, 🤣
@_LifeOfReilly 3 жыл бұрын
Ingenious and well thought-out! I’ll be ordering the plans, for sure! Also - the integration of the ad was excellent. I hope Hello Fresh appreciated it. 😉
@3x3CustomTamar 3 жыл бұрын
Thanks! And awesome! Hope it works out for you you 😉
@Nick_Graham_Woodwork 3 жыл бұрын
I ordered the plans as soon as she said they were available on the website.
@davidsneddon2242 2 жыл бұрын
Been subscribed for a little while now Tamar and really love your enthusiasm and ability to communicate during your videos. This one on the other hand takes these aspects to a new level, why? You start with the plans done, you then head straight into the cutting etc. and before we know it the jobs done and he practical applications of said begins. First class from start to finish, wonderful.
@3x3CustomTamar 2 жыл бұрын
So glad you liked it!
@robs_outdoors7478 3 жыл бұрын
I just built this using your very clear and easy to follow instructions. As a complete router newb probably a bit ambitious but after a couple of wobbly cuts I got the hang of it and it turned out great!! Newb tip : print out a few copies of the stencils as I found they get a bit chewed up so had to re stick the stencil a couple times and..... work slowly. I found 2 or even 3 passes on the router cuts made it easier. Now for the Dado jig thingy! Got a big project coming up that requires some routing expertise and so happy I found your channel! Nice work you.
@3x3CustomTamar 3 жыл бұрын
Awesome!!! So glad it worked out for you!
@andrewmcgibbon9785 3 жыл бұрын
The only drawback I see to this jig is using Acrylic. Acrylic is easy to crack. Lexan (polycarbonate) would be a better option. Though slightly more expensive.
@bobd. 3 жыл бұрын
I thought the same thing when she said acrylic. Lexan (brand name) or similar product would be a better choice. The difference in price you won't even think about when that acrylic goes flying all over the shop.
@russmartin4189 2 жыл бұрын
@@bobd. I chose polycarbonate because I had just bought and cut a bunch of it for security windows. I had a 1" strip 72" long and thought I would just bend and snap it into small pieces to discard. I bent it 180 degrees and it still didn't snap. It is very tough stuff. So, when it came to making this jig, it was a no brainer what I would use. Acrylic is good for picture frames, polycarbonate for anything that is going to be "used and abused and might crack.
@bobd. 2 жыл бұрын
@@russmartin4189 why are you directing your comment at me? Acrylic and polycarbonate are different animals. Your comments makes no sense with respect to me.
@russmartin4189 2 жыл бұрын
@@bobd. I was agreeing with you! Polycarbonate is Lexan.
@TechieTard 2 жыл бұрын
@@bobd. Where in the hell is your logic? He's backing up you and your comment!
@streetglidescott6424 Жыл бұрын
Just found an 8x4 piece of discarded acrylic sign tha is mostly clear and I’m in the process of makin sets of this jig for all of my fiscally challenged woodworking friends. Bough the plans and that jig set from Woodcaft. (They sure are proud of it but it IS convenient) and since I’ll be using it back and forth on several jigs it isn’t too painful. Helpful. Thanks for your posts, they are always both informative and helpful.
@Poundy 3 жыл бұрын
thats an awesome expansion on your previous router base/jig. Very comprehensive! Actually love the idea of the double base for the circle jig, so much better than drilling a hole !
@3x3CustomTamar 3 жыл бұрын
Glad you like it! Thanks!
@crankstonshnord6591 3 жыл бұрын
You should get JKM to start cutting these out of Lexan on his CNC so you can sell complete ones on your website!
@3x3CustomTamar 3 жыл бұрын
I’m going to have to look into something 😉
@jesshothersall 3 жыл бұрын
@@3x3CustomTamar I would love to just buy this set, as I haven't yet bought the router, and the templates look brilliant but a bit daunting for a complete newbie?
@3x3CustomTamar 3 жыл бұрын
@@jesshothersall working on it 😉
@guermeisterdoodlebug7980 3 жыл бұрын
Gotta know. Was, “Mom, what’s for dinner,” a planned set up for HelloFresh meal or unlikely coincidence?
@3x3CustomTamar 3 жыл бұрын
Haha! 😉
@Kust0r 3 жыл бұрын
Well staged! One of the few sponsor parts I didn't skip (and now I'm hungry...)!
@1100mrjohnson 3 жыл бұрын
@@3x3CustomTamar Alright then, keep your secrets ;)
@brandi1961 3 жыл бұрын
Awesome router jig. I'm new to woodworking and I recently bought a trim router and as a after thought I was wondering how I would be able to make a straight line free hand. Thank you answering that question
@benmorson4011 3 жыл бұрын
Gotta know... what was for dinner? Ha!
@zoltan8922 2 жыл бұрын
WOW!!! I am astounded, commercial jigs don't come even close to the versatility of your design. Beautiful work, well presented, I am speechless at how nice it is.
@3x3CustomTamar 2 жыл бұрын
So glad you like it!
@samuelmarrero5638 3 жыл бұрын
Amazing work, jig and personality. Geniusly woman.
@iguesi 3 жыл бұрын
You're the best!!! Mistakes and all. I appreciate how real you are, your enthusiasm and your designs. This was awesome!
@3x3CustomTamar 3 жыл бұрын
Thanks! Then I guess you’ll like the video I posted today.... the whole project is a fail and a mistake. Ha
@florenciaarangui3162 2 жыл бұрын
I'm in a hurry so this is the only thing I'm going to say: I've been watching your videos and I love you. Greetings from an argentinian woodworker. You are an inspiration!
@3x3CustomTamar 2 жыл бұрын
Haha thanks!
@withJordanFrank Жыл бұрын
My ready-made jig just showed up and was easy to assemble. So excited to use this and get more versatility And stability out of my trim router
@3x3CustomTamar Жыл бұрын
Awesome!
@ptcruiser2012 2 жыл бұрын
Why do I always come back to you and why do I always settle on your approach amongst all the other variations on every theme/jig on youtube? For several reasons. First is research. You always make yourself familiar with what is out there. Second is thoroughness. You always completely master the topic before you present it. Third is completeness. The videos always finish with a clear demonstration of how you use the jig in the real world. Fourth, plans! Almost without fail you put together well documented instructions. The perspiration that you give to everything is amazing. So easy to talk about, so damn hard to execute. Good lord Tamar. They are so easy to follow and so succinct. It almost makes me forgive your funny accent(jkaaaaaaay!!!!). Fifth is you always find a way to add your own special touch and raise the bar for everyone else. I made your crosscut jig. To this day I have not seen it eclipsed. Sixth is presentation. Flawless. You show your mistakes as well. At least the ones that you feel some needs to be aware of. And finally you just being you. We have all watched you grow. I raised 5 children. I know what it is to split time between your passion and the things you hold most dear. Good luck to you. Noone wants to lose you here but you know what comes first.
@3x3CustomTamar 2 жыл бұрын
That was really so awesome to hear. Thank you so much for taking the time to comment. It’s a ton of work. Glad to know it’s appreciated!
@MrLeram12 Ай бұрын
Glad I watched this video. Bought the bundle router table and 6-in-one from JKM and wondered what all the extra acrylic was for. You made it easy to understand. Thanks.
@MakerTrends 2 жыл бұрын
I’ve just made this jig and it’s so cool. It allows me to cut perfect circles effortlessly. That’s all I’ve used it for so far but I’m very impressed at how stable it is. I wish I could post a picture here.
@3x3CustomTamar 2 жыл бұрын
Awesome so hear!!
@adamcoe 5 ай бұрын
Just got mine in the mail! Really fantastic and dollar for dollar it has to be the most versatile and useful router jig you can buy.
@adamcoe 5 ай бұрын
Oh also Don't Tell Mom, The Babysitter's Dead. Here's how old I am: saw that thing in the theater.
@aaronr2091 2 жыл бұрын
One of my favorite YT channels - crazy smart and talented!
@ElusiveTrinity 2 жыл бұрын
Thank you Tamar for creating the template, its a brilliant addition to any woodworkers shop. God bless.
@3x3CustomTamar 2 жыл бұрын
So glad you like it!
@RyanQuintanapolymath 2 жыл бұрын
Tamar. You just blew my mind on how smart this is. Super awesome. Thank you.
@3x3CustomTamar 2 жыл бұрын
So glad you liked it!
@Cecil_X 2 жыл бұрын
Very cool. I like the fact that you can see through the jig. I made one out of Baltic Birch, using t-track for the slides, rather than slots cut into the wood. I had an old micro-adjuster laying around that I was able to incorporate. A jig like this is very, very useful.
@3x3CustomTamar 2 жыл бұрын
Glad you like it!
@crucklewooddesigns8139 2 жыл бұрын
HOLD ON HOLD ON HOOOOOLD ON!!!!!! i JUST HAD TO PAUSE THE VIDEO TO SAY FORGET THE OTHER JIGS FOR A SECOND, THAT STRAIGHT EDGE FLIP LIP HINGE JIG IS ABSOLUTE GENIUS, ...sorry for shouting, i will quietly watch the rest of the video now
@alancarlyon340 3 жыл бұрын
This is my first visit to your site, leaving very impressed with this young lady! I have just starting to get into creating my own router, saw, drilling tables. Your ideas are noted! Many thanks and I look forward in viewing more of your blogs!
@3x3CustomTamar 3 жыл бұрын
Glad you like them!
@JohanRoman Жыл бұрын
I just received my jig here in Sweden and I can’t wait to get going in my project house in the archipelago!!😋
@MrMagoo-no5lb 2 жыл бұрын
Who's down-voting this?? Your a genius! Wonderful jig. I'm looking forward to making this in the coming days 😁
@3x3CustomTamar 2 жыл бұрын
Good luck with it!
@brad_nailer 3 жыл бұрын
As usual, very clear and perfectly explained so everyone, even the most novice can understand. A wonderful jig.
@3x3CustomTamar 3 жыл бұрын
Glad you liked it!
@victoriabishop1057 3 жыл бұрын
3x3 custom = Tamar, I am retired old foggy. Want to get into hobby. More I see woodworking More I am drawn to it and now watching you non stop for 8 hrs. I am sold. Thank you very much. Kudos to you... You make it so easy. This should be shown to school children, included in wood working curriculum for them to get interested in creative working...
@3x3CustomTamar 3 жыл бұрын
Glad you like it! ☺️
@espnmk 3 жыл бұрын
absolutely genius, i always struggled on how to make a circle with my router but without leaving a hole on the piece i wanted to use. thank you... 3x3custom
@3x3CustomTamar 3 жыл бұрын
Glad you learned something! 👍
@louisshambarger2230 3 жыл бұрын
This is very timely because my wife (bless her!) noticed that a local cabinet shop had some 1/4” acrylic scrap for sale. I got five ~4’X4’ sheets for $20 and had a nice chat with the owner. Nice guy.
@3x3CustomTamar 3 жыл бұрын
Oh wow! That's awesome!
@russmartin4189 3 жыл бұрын
I purchased the plans and printed them out. For everyone out there,, they are excellent, and very detailed. Between them and the video, I'm sure my jig will come out right. I also bought a 24" piano hinge on Amazon for $8.99 to make the edge guide. Can't wait to make the jig and the edge guide and see what I can do with them. Tamar, I am now going to watch all your videos, except the guitar builds. I'm sure I am going to learn countless things that will help take my woodworking to the next level.
@3x3CustomTamar 3 жыл бұрын
Awesome to hear! Good luck!
@simonwilmshurst2382 3 жыл бұрын
Couldn't download the jig template fast enough , absolutely amazing !!!!! Can't wait to build it and get wood working.
@3x3CustomTamar 3 жыл бұрын
Awesome
@DVannorsdel Жыл бұрын
I have been using your jig for a year now and love it! I found a new use for it today, I turned it over a had an instant mini router table. With 2 prices of 3/4” plywood was able to mount it to my workbench. I don’t know how to add a picture
@darrenreyneke 2 жыл бұрын
You are incredibly clear, concise and easy to follow with some brilliant ideas for my workshop that I don’t even have yet. You my brilliant little friend are going to cost me lots of money but keep me ages building loads of great jigs and things 😁👍🏻😁👍🏻
@3x3CustomTamar 2 жыл бұрын
😂😂😂
@pretenda 3 жыл бұрын
Thanks Tamar, this jig looks awesome! I ordered the Makita 18v trimmer a few days back, this will be the first thing I make with it. Will grab the plans as soon as it arrives! I've never had a set of plans from KZfaq that I've felt are both achievable for me and useful for what I want to do, this is a first for me 🙂 By some miracle I've also got some acrylic the right size as well.
@3x3CustomTamar 3 жыл бұрын
So awesome! I hope it works out for you!
@MrMaacin05 3 жыл бұрын
Lining the templates up on a window blew my mind. That is genius. Your creativity in this video is beyond next level. Liked, subscribed, and humbled
@3x3CustomTamar 3 жыл бұрын
So glad you liked it! Thanks!
@dipootube 2 жыл бұрын
when I see something like this, I always said, "why didn't I think of that". I love how you made a jig with acrylic. Thanks for sharing!
@3x3CustomTamar 2 жыл бұрын
Ha glad you liked it!
@andyallard5990 Жыл бұрын
First time I have seen your channel I must say that was excellent including multitasking actually made me get up and do something to eat. Thanks for sharing. I will definitely be watching you again. Very clever❤
@ukie1242 3 жыл бұрын
Very impressed with your skill level and ability to explain what you are doing in easy understandable terms. Congrats for a job well done.
@3x3CustomTamar 3 жыл бұрын
Glad you like it!
@lenniearr8428 Жыл бұрын
Nice jig, Tamar! Instructions are very clear and easy to follow.
@lackleonhard3981 3 жыл бұрын
OMG...... Yesterday i Build a circle jig for My milling machine. Why did i found this Video last week? Great Job! I will definitly build this thing! Its awesome. Great job AGAIN!!!!
@3x3CustomTamar 3 жыл бұрын
Awesome
@Ferdy-Perezlara 3 жыл бұрын
Hola desde Cancún México, soy diseñador Gráfico, fotógrafo, y siempre he sido entusiasta de la carpintería, por fin he comprado mi primer sierra circular, aunque tengo Router, prensas y kreg jig escuadra y otras cosas, me hacía falta una sierra circular, tus videos son muy buenos e ilustrativos, me encantan y me encantan tus discos 👍🏻 gracias por todo lo que nos compartes 🙏🏻🙏🏻🙏🏻
@DawgsChamp88 3 жыл бұрын
OMG! Your build is truly awesome! So spot on with what I want in a jig packed with so many features! Especially the extensions and how to cut a circle without making a pilot hole like all the other jig makers have to do. Their jigs they made are great, but yours fits what I'd love to do. I have the Ryobi trim router. I was sitting here like how is she going to make a circle without drilling a pilot hole. You blow me away! You rock! Definitely gonna make this soon. Thank you to the moon and back. Love this!
@3x3CustomTamar 3 жыл бұрын
Awesome
@briancunningham1120 2 жыл бұрын
much better than the junk router kits showing up from you know where !!!!!!
@Shutyourjibbs 3 жыл бұрын
Great job demonstrating all the features of the jig. It's very evident that you put a lot of thought into the design. Thanks for sharing!
@3x3CustomTamar 3 жыл бұрын
Glad you like it. Thanks!
@davidstrachan734 3 жыл бұрын
I appreciate the way you muted the power tool noise so that I didn’t have to. Amazing jig!
@3x3CustomTamar 3 жыл бұрын
Glad you appreciated it!
@nicolehuppertdesign4504 3 жыл бұрын
I absolutely love this one! I can tell you put a lot of thought into the different features. So cool Tamar!
@3x3CustomTamar 3 жыл бұрын
Thanks so much Nicole! It was definitely fun to figure out ☺️
@ryanhirschey 2 жыл бұрын
Just finished making this jig to add to my collection of jigs from Tamar. It’s a great jig and the templates and plan make it easy to build. Thanks, Tamar!
@3x3CustomTamar 2 жыл бұрын
Awesome to hear!
@brianoaxaca7986 2 жыл бұрын
Ryan or Tamar, has anyone noted that using a 1/2” straight cut router bit to cut the recess for the T-bolts (bought from the alternative option on your site) is too narrow? I believe we need to use a 9/16 in. straight bit instead. Thoughts or comments. Thanks!
@rohitnarayan3966 2 жыл бұрын
This so cool! I love all the attachments to do different stuff. The demo part was great 👍 Thanks!!
@3x3CustomTamar 2 жыл бұрын
Glad you liked it!
@johnmiller8553 2 жыл бұрын
I am absolutely new, doing my first project - putting a wood top on an MDF desk and converting it to a vanity. Do any of you guys who know what you're doing remember how confusing it was hearing for the first time words and terms like "edge -banding", "designing a custom jig", "free hand routing"? Very much appreciate this lady Tamar, her patient, measured pacing and simple yet complete directions take the mystery out of much of this and instill confidence. I'm now very confident my first project will come out very nice and be the first of many. I've put a piece of plywood with a very pretty grain pattern on top and plan to edge band some hard wood and create a beveled edge.
@3x3CustomTamar 2 жыл бұрын
That’s so awesome to hear. I definitely remember being very confused and frustrated. So I’m happy to hear my videos are helping with that
@PetervanArkel87 2 жыл бұрын
Planning on getting a trim router soon, this is definitely going to be one of the first things to make with it! (Along with the straight edge jig, which seems like a great idea!)
@timrendall602 3 жыл бұрын
what a smooth ad transition. truly inspiring. captivating. that's gotta be worth a higher ad payout. bravo!
@3x3CustomTamar 3 жыл бұрын
Hahah! Glad you liked it!
@Phazaar 3 жыл бұрын
I have an almost identical jig; first thing I made for my palm router when a finger injury was making using the 'big one' painful. The circle-cutting-without-a-centre-point bit is absolutely inspired though; it's time for 2.0! As for that piano-hinge straight edge. Why have I never thought of this?! Genius :)
@3x3CustomTamar 3 жыл бұрын
Glad you liked it!
@meestahwah 2 жыл бұрын
That jig is awesome. That said, the star of the show here is the folding offset router straightedge!!! Damn!!! That is a super clever solution to an age old problem. Thanks for the great ideas... Oh, and the movie is Don't Tell Mom the Babysitter is Dead. Love that scene and often use that line here at home.
@3x3CustomTamar 2 жыл бұрын
Hahah! Glad you liked it!
@Nicolopez98 3 жыл бұрын
Came back to the video just to say that its awesome! you're incredible talented and this jig will make my life way much easier. Thanks for sharing
@3x3CustomTamar 3 жыл бұрын
Awesome to hear! Thanks so much!
@dwayneford1990 2 жыл бұрын
YOU'RE EXCITED? You should be me right now! Your plexiglass router jig is going to change my life and save me big money. You are a treasure Tamar. Thank you SO much!❤
@3x3CustomTamar 2 жыл бұрын
Awesome to hear! Glad it helps you!
CarpenTAK_DIY Woodworking
Рет қаралды 221 М.
tiny-cabin-woodworks
Рет қаралды 145 М.
3x3Custom - Tamar
Рет қаралды 1 МЛН
CarpenTAK_DIY Woodworking
Рет қаралды 663 М.