You did not 😂😂😂

Shi$ sounds clean .. bass drops hard

Thabks man i appreciate it. You really gotta give then the power they deserve!

stock alt and bat aint given that 3500 shit.. i had 1800 on 1 12 sav2 moving way more than air than these 2

​@@iTzBrusswhat kind of box you have. It all comes down to the efficiency of the box. He has his blowing out the back trunk. Not really efficient. But does make good for sq

@@bassheadfanatik boxes in the trunk are better off with a side port.. sub facing rear and port out the side.. my box is 1.8 at 33hz

Thanks man

Thats a solid setup, id love to see a video

@@AudioEuphoria080 maybe one day I’ll record. Only videos I really have are before I changed all my amps out and before my DSP.

Yeah man its so tough keeping the plate and ford emblem from rattling like hell. And thanks, i appreciate it 🙏

If your looking for some budget subs as a starter i would get 2 e12's and run about 2000 watts to them. Dont forget a good custom box and some extra electrical upgrades

Thanks bro

Thanks bro appreciate it

Yeet

Thanks!

Yeah i bet that stuff does great, but this build is temporary until i get a new car

Thanks!

Big brain 🧠

Thats so awesome man, i wish they were still dropping bangers too. Demon lover has got to be my favorite song by them

Ended up turning my subs towards the front and sealing off with pillows around the sides and under the rear deck

Thats badass man but how are you pushing so much power with that alt and battery? Also yeah im very surprised by how hard this hits for how pathetic my electrical is lol

@@AudioEuphoria080 honestly the xs power battery is an awesome little guy. It is the only reason I can draw so much power. It was like $240.

Now I have to find a reason to go for a drive lol thinking about tearin up the neighborhood.

@@KillaSquant420 haha! I always go for drives when im bored just because i love my music. Also that battery does sound like a good deal. I want to build a 40ah yinlong bank tho

@@AudioEuphoria080 yup that’s a good goal. Money is just always an issue for me.

Makes me wonder what amp you have them on bc 2 bamfs should be movin on 2000 watts

160 amp alt. Definitely not ideal and the amp only puts out half its true power because of it. It overheats at times and other times it goes into protect. I just got 2 northstar agm 220's and a sundown scv3000 so ill have a new video in a few weeks after its all installed

Cool can’t wait to see it

I did with my sealed box and it sucked that way lol it didnt shake anything and it was like half as loud. But i havent tried with this box since its so hard to move in my trunk

@@AudioEuphoria080 what are your thoughts on that amp I might get the SFB 5000.1 for my car and just like you I am on stock electrical but not for too much longer

@@markbrown8141 i love it so far. I actually am replacing it with an scv3000 just for reliability but this one puts out great power for stock electrical.

@@AudioEuphoria080 what speakers do you have in your doors?

@@markbrown8141 sorry for the late response, i just saw this. when i bought the car i didnt realize it had aftermarket speakers till i opened the rear deck, so i moved those to the front and took out the junk stock ones. The speakers in the rear deck that i moved to the front doors are Kenwood KFC-C5793PS (i call them my drumstick speakers) and then i have skar tweeters in the A pillars. Its all ran actively on a skar sk400.4d

I ended up turning the box around when i had them

Hell yeah man youre bumpin fr

These subs will easily take that amp, honestly you could run 2 of those amps. I hope the build goes good for you

@@AudioEuphoria080 I wouldn't say that. I will have them wired at 1ohm. The amp pushes over 2500 watts at times or more. That amp has a lot of power I do mean alot 😂

Yessir that amp is a beast but trust me haha those subs are even bigger beasts. My brother had 2 sa v2 10's on a synergy wfo 45.1 at half ohm and i had my 2 sa v2 12s on my 35.1 at 1 ohm

And my synergy 35.1 does 4000+ watts at 1 ohm

@@AudioEuphoria080 What electrical did he have to run at 0.5 ohm? That's a shit ton of power

I could definitely be wrong since im not the smartest when it comes to wiring, but i was sure i dropped from 2ohms to 1 ohm when i used 2 terminals on the amp instead of 4 since my gain would be the same when i changed my head unit from -5 to -8 on the SW level. -3db also equates to 50% less gain so it all added up to me atleast. Not totally sure what ohms i was at but 2 ohms seemed correct. I did later on switch to 1 ohm but i forget the time frame. It may have been this video that i was at 1 ohm and made a mistake when talking about it.

@@AudioEuphoria080 you were probably running woofers in series then together in parallel to a 4 ohm final load. I was just curious about that thinking maybe I was missing something. I’m currently running 2 Sundown SA10v2’s dual 2 ohm coils at a 2 ohm final load. It was either 2 ohms or 1/2 ohm final on dual 2’s and my SFB 3000d can’t run below one ohm. So they’re probably seeing around 750w each or 1500w total. I know they can handle probably twice that but I’d have to buy a 1/2 bridge Korean style 3k sub amp or recone my subs to dual 4 ohm coils to get all the power they can handle…. Or add 2 more dual 2 ohm subs but then I’d need at least a 5k amp and lithium batteries to supplement my 300a alternator and 500farad supercap bank. My 10’s are in a 6th order enclosure and sound great even tho I’m not feeding them all they want so I’m content for now, might change up in the future but those 2 SA10’s get down like they are!

@@matttownsend3069 man your right, my subs were ran in series and parallel so i guess i was at 4 ohms. Also your could get a taramps that is 2ohm rated at like 3k or get a taramps md5k that is 2ohms. They do rated power at 2 ohms instead of 1ohm for situations like yours

Use one coil from each speaker then run Parallel to amp . Final load 2 ohms out .

​@goodvibesonly2156 running 1 coil reduces power handling by half and also changes how the speaker behaves because that changes the t/s parameters

I made a mistake, iwas at 4 ohms

I bought it used for 30 bucks from some guy off facebook marketplace. I dont know the dimensions since I've sold it now but my guess is it would be about 4-4.2ft³ and it was tuned at 35hz i believe. Single baffle

@@AudioEuphoria080 must be nice

@@liberalsarethebiggestcryba6654 the port was all screwed up

No, i bought it second hand.

I bought it off facebook marketplace

David k thanks

@@DBThatBassMan i have a new box now though tuned at 29

Definitely get a bigger amp brother, those subs will take a jp23 per sub 😉 Also add tons of sound deadening and that will help too

Whats your battery reserves tho with that alt?

@@AudioEuphoria080 Yeah I sound deadened the trunk and doors. Im thinking about getting another amp, just not sure if I got the money right now. Your system is nice, im jealous 🫡

@@AudioEuphoria080 Not entirly sure what you mean, but I have a stock battery that came with the car, ik lol. It sits at mid 13 volts, Lowest Ive ever seen it drop during a burp was high 12, less than a 1v drop. I can get back to you tomorrow with real number, cant remember off the top of my head. Im stuck between xspower d3400 battery, or a JP33 3300W amp, or even building a new box, a slightly smaller box at a higher tuning freq, money is tight rn so I'm just trying to save.

@milky6285 you should def get a second battery, even with not much voltage drop lead acid can only discharge so fast. And agm would be much better

If i did have this setup still 4 gauge would def melt under full load

@David-wg5ce not with three marine batteries on stock although yeah you will haft to let it warm up charge the bank but after that you got like an hour of run time on the way to work

I only use mine to and from work

A voltage pcm control module from u.s alts is a plus

But yeah true copper 4 Guage will handle it

Perfect timing bro! I have kenwood 5x7 coaxels and skar tweeters ran active on my skar amp, but i just ordered hertz dsk165 components and some 5x7 to 6.5" converters with some spacers and rubber cups for the door speakers. Should sound very good after all that.

Im gonna out the kenwood 5x7's in the rear deck

@@AudioEuphoria080 nice I’m thinking about doing one more build when I get my new car. I want to do a 3 way passive or active set up. I’m looking at the hertz mille, alpine status 3 ways or audiofrog g60s components. I’m only trying to do 3-4K in subs

@@edmondcarter9457 great choice, that will sound amazing

Where you located im selling it

@@AudioEuphoria080 how much are you sell it for? What state are you in

@tony snow missouri. Honestly would sell it for like 50 obo

@@AudioEuphoria080 damn, I’m in Louisiana.. I would get it today if we were closer

@@portcity1911 yeah honestly ide give it for 30 since thats what i got it for lol

In the description 😉

Do your lights dim?

Yep youre totally correct. Ive learned alot in the last year and i think i was wired at 1 ohm not 4 or (definitely not 2)

Already did 😏😉 i went and picked up an scv3000

I wanna get it metered and get my watts clamped 😈 sometimes i have to readjust my rear view mirror because it shakes out of place

Talk more in the vids we love the info on the speakers or whatever

Thanks for letting me know. I put it in a bigger box and it was way better

@@AudioEuphoria080 better off with side port in a trunk build unless you seal off with subs facing the front. Your electrical is not good enough for 2 V2s, theyll handle 2k a piece no problem

@@iTzBruss dont watch my later videos or anything