Could you do an uninstall video as well... You know ... for us Queenslanders who will have to take it off as it is too high ;-P . ?

How do you not have more subscribers? Your work is quality!

A lot of dual-cab utes now have that bent-down second stage in the leaf springs for ride comfort. The weight of the vehicle definitely won't bend those override leafs haha.

Awesome video. I wish shops on the US paid that much attention to spring rates as much as you all do in Oz and S Africa. They do a generic lift, stiff shocks and springs then send you bouncing down the highway.

Been using Malaga Suspensions for 3 years now, work and Offroad... Toms' the Man !

Thanks Sam, 100% next upgrade to my Ranger

Would love to see a walk around of this rig!

Getting in before 4000 comments on not putting bearing grease on Polly bushes 😂 and not 100% sure what the front brake lines were undone and not just undo the caleper bolts and swing it out of the way 🤷🏻‍♂️

AT 6:38 you describe the rear spring as bent - Rangers come like that from the factory (I have a 2020.75 and it's never been overloaded and mine are like that). You can actually flip that inverted leaf over to increase the weight capacity if carrying a heavy load regularly, as a poor man's upgrade to the stock springs. Good video though, very informative.

Last time i came this early it was last night.. 56 seconds ..

Would not recommend removing the stock spring from the shockie like that. Use the correct spring compressor. My apprentice did it your way to save time and the shock shot 20 meters down the workshop.

mad video suspension looks like it rides smooth as butter

I powder coat all the upper control arms for superior 🤙

Wilbinga tracks at the end 👌🏼

Almost certain you all installed the rear shocks upside down. They might be easier to adjust the other way and the stock orientation is with the body on the axle side. Should work no worries! Wish we had diesel Rangers here in the states...

Nice one mate. I wish I had a hoist handy when I installed the diff drop into my ranger 😌

Almost everyday I’m across the road from Malaga suspension, picking stuff up from good guys, hope I see you there one day 😂

Nice video man, love the action shots of the Rangie!

Too easy mate haha

Scared the shit outta me at the beginning had the volume on blast 🤣🤣🤣

Thanks for reminding me why I don't own any ifs vehicles.

Great job mate. Would love to see how it goes off road. Have a 2 inch lift and 33's I installed myself on my Ranger in the driveway. But as they say bigger is better. Or is it? Please let us know if it is.

How does this channel only have 35k subs

Nice, I'll definitely remember to remove my spare tyre removal rod if / when I attempt this ;)

Another helpfully video Sam, great work mate

greetings from America! Very cool Ranger

You deserve way more subs awesome vids man!!

Best way to have zero flex

1 you can't balance a shaft to a diff.. 2 get spring compressors they are about 50.

How do you get an engineers certificate for it? Because the max without a certificate is 2 inches. Do you just go in and they verify it’s safe or is it more complicated?

Putting some angle on the CV joint.

Good stuff Sam your always entertaining👍👍

pitty a 4" lift isn't legal in all states

So why the decision to make it illegal ???

that ranger looks pretty tuff. sucks having an older ifs car as there are fuck all aftermarket parts...

Great vid, but would've been awesome to see before, mid and after pics to see the changes etc, other than that, pretty cool

😂😂😂 loving the work boots mate! 👍

Love the safety boots

Haha spin out! I bought the spacers off zac from facebook!!. Good vid Bnb!

tighten all pivot points (control arms,spring and shock bushes) after it is back on the ground at ride height. otherwise it will ride like shit and destroy bushes. you probably did that but didn't point it out on the vid for newbies.

Quality Video Mate👌

Bloody intro… almost spilt my coffee

Superior aye? Looks like a good lot of gear!

3:15 that's not the strut tower, it's the top, strut hitch.

My next door neighbour is the manager of Malaga suspensions 😂

Hey bud love the videos, keep up the good work. Are you able to tell me what exhaust your brother has in his ford ranger?

Great video.. This is one time when a mate with a hoist makes life easier! Haha

Can you get any more Australian aha Working on your brothers car, in your back garage, using a millk crate as a seat and started by wearing ugg boots ahah

You forgot to mention or forgot to do the brake proportioning doovy for the rear. Also what exhaust does your brother run?

Thanks that was interesting.

How has no one commented on the UGG BOOTS! Real men wear uggs in their sheds.

all you need to do now is learn how to pull springs apart correctly and put them together

Sick rig..

fkn love your work Sam!

Would have been nice to see more detail on the diff spacing.

Wicked pickup and suspension up Grade

5:05 Shock and Horror:)

Instant defect in Qld

What’s he done with the exhaust? Sounds mint.

Hey mate, great vid. I want to know how the ezy lift spacer on the rear leaf springs was while on the vehicle?

You could of just rented a spring compressor tool from the auto parts store for free and assembled everything in the lot in like 20mins and returned the rented tool right there and then

Hey mate nice one, new subbie here. TJ sent me over. cheers! look forward to check out the rest of ya stuff. Have a good one :)

Why you would put a 4" lift on a vehicle with a limited 6.5" of full front end travel is madness. A lower lift with mods for more travel would perform better.

Always loved these px2 onward rangers. I thought they looked neat despite what these old dinosaurs say about being all plastic. My gu is getting a bit long in the tooth and been eyeing these out. Don't do that much off roading due to work anymore and the fuel savings and power of these would be nice to have. Bet its more capable than my patrol too seeing as they have factory rear diff locks. Would love to see this in an offroad video.

Best part of the video. lol 5:35

Not much downward wheel travel in the front end seems to be a bit of a waste

What's been done to the exhaust setup exactly? Sounds much better than factory, And also any tuning been done to the engine?

So by all ifs vehicles do you mean ALL ifs vehicles? Finding it hard to get solid info on anything over 2" on my Everest.

Nice job well done, but what about the Cops ? Suspension and tires max 50 mm total or illegal

Hey Sam , What does your brother think of the superior shocks after having them for awhile?

Spring compressors are about $20 man ;)

Those cv angles 😬😬

Epic!!!

Hey Sam! I had malaga suspensions install a 3 inch lift kit (Dobinsons IMS) into my 2017 ranger XLT about 2 months ago. My ride feels super firm though, especially at the rear. Is there a way to soften it up a bit without replacing the springs? Cheers mate.

Where did you get that jack from??

when you lift a vehicle, the cross bar angle is changed which is from gear box to differential. Is it harmful for the cross joint?

Are you able to tell me the extended length of the rear shocks? Or the part number for them?

Hey mate, what rear bar is that??

So that diff drop bracket you cut off. Well I hit that in a rock and it caved the front of the diff bracket in. Are there any serious issues that happen later with denting that bracket in? I don’t feel any vibrations at all and I can’t tell if it moved the diff or anything. Safe to say the front plate to the bracket caved in without actually moving my diff?

So don't use spacers in the springs for a lift?

max 2 inch lift in wa including tyres

Hi BnB, a Question about the size on of the rear lift block pin if you know, is it a 9/16" pin? (14.3mm)?

What trade do you do?

So how was the test drive after the upgrade? I've got an Everest I'm looking to upgrade the suspension on. I've seen this kit online but I know nothing about the brand.

I was told that with the superior remote res lift kit for the 2021 ford ranger PX3 ford does not need a diff drop when going 3 inch lift. What are your thoughts?

nice mate , have the same car , what exhaust is your brother running ?

12:38 nice 0 flex

Sooo big question , what did it all cost

Going up 4 inches would the tail shaft need spacers at all mate?

Can you do a video on the mods on this?

Hi I m planing to do 2 inch lift to my hilux. Is It good If I used struts to life the hilux? What do you recommend?

What’s the biggest muddies you can fit under that 4 inch lift

Do you think its worth doing the lower control arms as well?

question mate, spacers are bd ? i dont go off road hardcore like you would.

where can i find more of your brothers ranger?! ooft!!!

is it possible to fit a 3.0 in. lift kit in the new Ssangyong REXTON 4WD 5-Dr SUV???

soo.... do you tell your insurance about this mod? =P

On the rear is it a 2 inch leaf with 2 inch shackle?

Nice 👍🏽 where you blokes from?

what shock is that? What drop kit are you installing?