Some of the manual may have error. 1) Firstly, do check whether the unit memory is cleared. If it is cleared, the light will not stay put if you press hold the button. Code cleaning method: ---------------------------------------------- Press the unlock button (A) and lock button (B) at the same time(if your unit flashing non-stop, it means your unit is already ready to copy and memory is cleared), after the LED indicator light flashes three times, release any one of the buttons and while keep pressing the other button. Then press the released button three times slowly, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press. Now, to duplicate/copy : ---------------------------------------- hold the button of original/old remote control you intended to copy to : press and hold the old button FIRST then only press and hold your NEW key fob for corresponding button, your new key fob will flash... copied successfully then you can release both buttons repeat the process for other buttons If everything correct and still won't copy, meaning : 1) your original unit has a rolling code, different frequency or some weird chips 2) malfunction unit.

Hi, not sure if someone has the same issue. I have the same garage fob, but a few weeks after programming it's not working and I have to do the programming again. I even bought two and they both lost programming at the same time. Does anyone know what could be the reason?

Por fin.....gracias. tu video me funcionó. Thaks very mach

Why they just dhow how to program the remote control but never show if it real works on any real garage or gate door opener ?? I bought 4 of this on Amazon and I never getting to work on the gate door opener..

why my daihatsu bego car remote alarm red flashing light instead of green light

Merhaba elimde 433mhz kumanda var fakat ne yaptıysam resetleyemedim ve kopyalayamadım AB tuşlarına aynı anda basıyorum ve sonra b tuşuna 3.4 kez basıyorum yinede olmuyor ışığı sabit yanıyor sürekli ne yapmalıyım acaba

Estoy con el mismo problema, tengo 2 controles nuevos, configurados en una placa de 4 canales y necesito uno pero no puedo borrarlo, he probado todos los modos recomendados pero no tengo suerte

433,92 calismiyor kopyalama yapmiyor .5 adet aldim cinden lakin hic birisi calismadi.motor ecostar calismiyor

Donde compro el mando de led rojo?

Hello there is another Remote with just the A and B button, is it possible to do the same with this one?

Errou.

Malo el video

non ci riesco

Telecommande cjbin

Nulle

Nulle