472. Part 5. How to reassemble the drivetrain on my 33 inch Snapper.

Рет қаралды 931

2 ай бұрын

In this video we’re going to be putting on some more parts and I’m going to show you how to get the frozen pin out of your shift handle. If you have any questions or comments, send me an email. And as always work safe have fun and I’ll talk to you soon. Jim

Пікірлер: 21

@_BarryD 2 ай бұрын

The ratchet wrench is one of the best tools to have , last year I replaced my starter solenoid with one from John Deere it only lasted a month I took your advice and got a Home Depot one (what ever brand they sell) it works great and saved a lot of money

@leonmichael576 2 ай бұрын

Nice work your videos are great help just bought a snapper 28 that needs work

@jimjackson9381 2 ай бұрын

Well let me know if I can help you out. Jim

@leonmichael576 2 ай бұрын

@@jimjackson9381 what motor from b&s would you say was the best motor put on a snapper?

@jimjackson9381 2 ай бұрын

I would think somewhere around a 10 horse or a 12 horse engine would be plenty big for a 28 inch machine. Jim

@FIEROF55 12 күн бұрын

Hi Jim! Do you still make the heavy duty spreader bars? My thin OEM one is bent. Thank you for all the great information! Sincerely, Craig

@jimjackson9381 12 күн бұрын

Yes, I do. They’re somewhere around $20 apiece. I don’t know exactly I think it’s 1950. I’m not sure and it’s $11 shipping and I have PayPal if you’re interested.

@jimjackson9381 9 күн бұрын

When I got home, I checked the price and the are $19.50 with $11 shipping. I have a PayPal account if you’re interested.

@ramtek2702 2 ай бұрын

How about some links to the previous videos????

@jimjackson9381 2 ай бұрын

If you are a subscriber to my channel, you don’t need links to find a videos you’re looking for all my videos are numbered and titled to make it easier for my viewers just above on my homepage where it says manage videos. There is a link you can touch to bring up a complete directories of all my videos by number and title, I don’t think anyone else on KZfaq offers this for their viewers.

@ramtek2702 2 ай бұрын

@@jimjackson9381 That's fine for subs familiar with your organizational skills but what about the guy who stumbles on this video and doesn't want to start watching part 5?

@jimjackson9381 2 ай бұрын

It’s very easy to subscribe the lower right hand corner of every video is an icon just touch that and it’ll take you right there. Jim

@ramtek2702 2 ай бұрын

@@jimjackson9381 I've been subscribed for some time, Jim. My point is that not everybody is or wants to be subscribed to watch a video in sequence.

@danielbarrett1458 2 ай бұрын

Can i slide my axle out left side to install new boots?

@jimjackson9381 2 ай бұрын

If you have your machine standing up and you’re looking at the bottom of the machine, the fender on the left-hand side with a differential on it, unbolt the six bolts and the spreader bar, and you can slide the assembly out of the rear case once you take the tire and wheel flange off of the right side then you can replace the boots and slide it back together

@juanherrera9721 2 ай бұрын

Hello, where can I get a carburetor from an old snapper?

@jimjackson9381 2 ай бұрын

Well do not get one from Amazon they hardly ever work and if it does it doesn’t for long. I would go to your Ace Hardware and have them order you one. Jim

@juanherrera9721 2 ай бұрын

@@jimjackson9381 I bought a carburetor on Amazon but it didn't start the tractor

@jimjackson9381 2 ай бұрын

@@juanherrera9721 well that doesn’t surprise me any. Jim

@jimjackson9381 2 ай бұрын

I order engine parts from my snapper dealer or my Ace Hardware store that does small engine repairs. Jim