Imagine sitting in a theater and the guy infront of you is just sitting there with a keychain full of locks, slowly picking them
@IkeofCrimea5 жыл бұрын
Would probably ask him to share
@Chris330YT5 жыл бұрын
Jackmjedi lmao when he said “I take it with me while watching a movie”, I thought he meant in a movie theater too. Haha
@redyau_5 жыл бұрын
*quickly
@ducktective75205 жыл бұрын
I imagine him being asked for some Netflix and chill and he first goes to grab his chain of locks before heading out.
@mittensfastpaw5 жыл бұрын
I'd probably ask him what he is doing and if friendly conversation on it.
@phwoggy.2 жыл бұрын
“Honey is everything okay? You haven’t picked a lock for hours”
@misschauffarde51122 жыл бұрын
Houuuu must be a Bad day
@bentonrp2 жыл бұрын
"I've just grown so bored with all of them. ...Is there no one to surpass my power?..."
@rushthezeppelin2 жыл бұрын
LPL hasn't picked a lock in hours. Mrs LPL: I bet he's thinking about other women. LPL: Man that paracentric keyway really has me stumped.
@Atlas_DXUlt2 жыл бұрын
@@bentonrp he goes as far as to making a lock even he can't beat/j
@bentonrp2 жыл бұрын
@@Atlas_DXUlt Right! 😃 And then he, himself, ends up getting accidentally locked-in because of it. Some kinda pastiche to those ancient Greek tragic plays, or something...
@noukhollands2 жыл бұрын
At the movie theater: "sir, do you want some popcorn?" "No, do you have some LOTO padlocks?"
@carltonbauer2779 Жыл бұрын
Yeah, right?
@j37j22 жыл бұрын
I've worked in the industrial field for 15 years and I think I know the answer to your paradox with the loto locks. A given employer may have thousands of these locks on their site at a given time (sometimes 10+ per employee), and possibly use millions of locks over the course of their business lifetime. You absolutely cannot have a key that matches a lock anywhere else than that one lock it is tied to, that is a big insurance and safety problem. So the more pins allows for more key variations. Also, people are constantly sticking their keys into the wrong locks accidentally, and so the higher quality core allows for less chance that they will force the lock open before they realize it is the wrong lock. I do this multiple times a shift, because I have several locks issued to me with many similar keys and I typically just go through them until I find the one that opens (I know I should label them). The more pins means there is more variety for the keys and less chance of a duplicate on site. The higher quality core, which is in all likelihood regulated by law, means less chance of someone forcing a very old lock open. The reason the quality of the housing is so poor is intentional. You want to be able to cut or even smash the lock off in a hurry if you have to. Maybe there is an emergency and you think of a way to operate the machine in order to try to save someone who is injured. Also, more benignly, people leave for home with their locks on machines all the time on accident handing off to other shifts. So you don't want some sort of monster lock on there that you can't get off without the key. The cheap build makes buying them much more affordable for employers, when they buy thousands of these at a time. They are not security locks, they are safety locks. High volume that must meet stringent safety standards (6 pins) for various reasons, but are not meant to be undefeatable in all circumstances.
@j37j22 жыл бұрын
As far as why there are stronger locks with shitty keys and cores, that seems pretty easy thing to answer. Most of these locks are all fairly cheap and sold at hardware stores, likely bought by soccor moms and the like to keep their shed closed or maybe a dirt bike or something chained up. You don't want some petty incompetent thief to be able to smash the lock open or cut it open easily when you're not around. But if you misplace or lose the key over the winter time while you're not using whatever you have locked up, you also don't want it to be an impossible task for a locksmith to open your lock. Maybe you could even pick the lock yourself. Also more pins means more points of failure outside during rain and rust and exposure to elements. In short, the customer gets what they want. These decisions aren't being made by masterlock. They're being made by masterlock's largest customer base.
@j.p.vanbolhuis86782 жыл бұрын
@@j37j2 "They're being made by masterlock's largest customer base." True yet false :) You assume the customer base is informed and makes a reasoned decision ...
@j37j22 жыл бұрын
@@j.p.vanbolhuis8678 I don't think its unreasonable to assume that the insurance companies who require these locks can make informed decisions, when they are the ones who lobbied the government for these regulations in the first place. There's no one person or organization who comes up with these ideas. The market evolves until it meets what is best.
@DanielHatchman2 жыл бұрын
I was going to say the exact same thing. Glad someone figured it out :) A lock out lock isn't for security. It's to stop operator error.
@TheHazelnoot2 жыл бұрын
@@j37j2 Well, trouble is, masterlock does advertise a lot of easily defeatable locks as "unpickable". Assuming you're ignorant (not stupid per se, just not a locksmith), you might rightly assume that lock is enough, even if it's actually garbage. "High security" locks defeated in a single second, where the average consumer may simply not know about such weaknesses and may reasonably demand a lock that, well, locks something. When the consumer is lied to, an educated decision isn't exactly easy.
@sinisterzz50313 жыл бұрын
Could you imagine sitting down with your husband to watch a romantic movie and you hear “2 clicks from 3, 4 is binding” very quietly
@KF13 жыл бұрын
"Honey, what are you doing? Turn and face me" ..." a little counter-rotation on 5..."
@__-ng4ij3 жыл бұрын
@@KF1 a big false set on 6...
@jmssun3 жыл бұрын
In bed …
@davidmontgomery95703 жыл бұрын
I bet mrs.LPL can lol
@ahuman99403 жыл бұрын
I shouldn't find it as funny as i do. Thank you very much for making me laugh
@_Vengeance_4 жыл бұрын
The LPL Paradox: he's Master Lock's biggest customer as well as their biggest enemy.
@Tinlion094 жыл бұрын
A true nemesis, like Moriarty to Holmes.
@georgewashington28934 жыл бұрын
A true nemesis, like 33° to ice
@sohutohh4 жыл бұрын
A true nemesis, like spicy food and my colon.
@shappah2214 жыл бұрын
A true nemesis, like my grades and my parents
@jamesp12384 жыл бұрын
@@samobrien4046 Jamal, is that you!?
@williamogilvie6909 Жыл бұрын
The lockout lock has probably saved lots of lives. Many years ago I was developing electronic sign control software with a fellow named Jimmy. When the electricians were working on the sign (3 phase, 400 Amp service), they would put a lock on the breaker box and put the key in their pocket. Jimmy would invariably want to test something and would run over to the breaker and try to turn on the power while the electricians were up a ladder and inside the sign.
@prslespaul2 жыл бұрын
I'm a chemical operator and I do lotos essentially daily. We have all 3 locks in this video mentioned. The plastic body is by far my favorite for its light weight (we often have to carry 30-50 at a time) and it's ability to endure weather and corrosion. We work with HCL, sulfuric acid, h2s, chlorine etc and the other locks in the video pretty much always get siezed closed in our harsh environment. The plastic ones can remain in a lockout for months and will unlock months later without issue whereas the metal ones often have to get cut off due to corrosion.
@classicrocker819 ай бұрын
I can see that happening given the conditions. My work gave us American Lock 1100s but of course being aluminum bodied they get beat up pretty quickly after being carried around all night. Mine have gone from being red to having no finish on it at all so I think the plastic bodied would hold up better lol
@vinces82093 ай бұрын
Did u have separate lockout boxes, basically said locks are associated with a particular box set so locks 1-12 box A4 labeled for that box, the keys for those go into that box and that box is locked by your personally labeled lock and you only carry the one key for that particular box granted sometimes multiples for several boxes but no need to carry 30 keys around.
@wrpen992 ай бұрын
@@vinces8209 It's not the keys he's carrying around, it's the locks. On any given piece of equipment you could have literally hundreds of lockout points, every single one of them has to have a lock, and there's only gonna be two or maybe three guys if you're lucky handling all of it.
@TheZachatree3 жыл бұрын
Don’t mind me while I pick these locks during the film.
@SirTomFoolery3 жыл бұрын
"we had a little false set there.. nice click out of 5..." Ummmm sir, can you be quiet please
@titifredie30563 жыл бұрын
@@SirTomFoolery hahahahhahah😂😂😂
@titifredie30563 жыл бұрын
I never understand anything of the piking part
@titifredie30563 жыл бұрын
Rotating on 1 he's set... 2 is binding
@keithcronk79803 жыл бұрын
SURE THING CAN WE WATCH BROTHER
@haydenwiseman30564 жыл бұрын
when youre construction worker in a dangerous place with a switch that could kill you and you hear "number 4 is binding, got a little click of him"
@ElementofKindness4 жыл бұрын
🤣😆🤣😆🤣
@luciocarmona34474 жыл бұрын
😂😂😂😂
@residentevil369369364 жыл бұрын
Bruuuh this needs more likes
@haydenwiseman30564 жыл бұрын
hat tbh I didn't even know that it had this many likes til you replied lmao
@nws_of_cushing_ok71884 жыл бұрын
*confused tom face*
@justincford2 жыл бұрын
As a safety professional I can explain the paradox. This is the best LOTO lock because the likelihood of mistakenly taken a lock off with a similar key is very low and uet it is very easy to remove by force when an employee goes home and locks out critical machinery. There are procedures in place to cut a lock and Noone not even management can unlock the lock without destroying it. These are Industry standard and in my carreer I have never seen the other locks he has shown. This lock is ideal to its purpose.
@garethjones71822 жыл бұрын
Brings back bad memories of working for a certain large online retailer.. I used to randomly select one engineer for a LOTO audit weekly, the locks used are the same as this one. Remember: locks only keep the honest people out.
@unitrader4032 жыл бұрын
Then explain why its full of security Pins, and it has more of them than the Locks they rate the highest on their Security Scale (which only have standard Pins)?
@matthewsullivan95982 жыл бұрын
@@unitrader403 there's a little more to it than what Justin Ford said but not much. First, job sites where LOTO locks like this are used can have machines that are multiple stories tall and during annual scheduled maintenance can have dozens of contractors and hundreds of workers on site. Amongst those hundreds is usually one asshole who thinks the rules don't apply to him and knows how to force a typical lock with pressure on the hasp and a dead blow hammer so he can turn on a light in a crawl space. He might even keep a bump key or rake in his pocket. Locks of these types should be impossible to manipulate into opening without a key but should show damage at any attempt to brute force open so anyone walking by would notice it's been messed with. The danger isn't that the lock was brute forced open and it's obvious after the fact (no valuables stolen) The danger is someone doesn't know the lock was picked or jimmied and goes into the danger area.
@unitrader4032 жыл бұрын
@@matthewsullivan9598 This still does not answer the question why Masterlock does not use these cores in their highest rated products even though these Cores are objectively more secure...
@matthewsullivan95982 жыл бұрын
@@unitrader403 Cost. More pins=more money. It takes more manufacturing steps and security pins take more fine machining. I think lawyers have an impact as well. If the actual core fails or is defeated on a LOTO lock someone might die. That's huge liability to the company. If the core fails or is defeated on an expensive high security lock and your garage gets ransacked it sucks for you but you're not likely to sue Master Lock for millions. People pay a premium for a tough LOOKING lock without knowing how good the core is so why waste money on the core? I'm not defending I'm explaining and I get frustrated by it too. Yet it makes sense from the business side.
@ericgrandmaison56312 жыл бұрын
As an industrial electrician, I've seen a good amount of contractors leave site permanently without taking off their LOTO locks. Therefore their locks needed to be cut off. Assuming this is the reasoning for the low security exterior.
@kjellcampbell76686 ай бұрын
also it’s a lot cheaper, which is important since they’re often bought by the hundreds
@Brent-jj6qi3 ай бұрын
@@kjellcampbell7668also chemical resistances
@mattcolumbia79483 ай бұрын
Never thought of that. That is an extremely reasonable assumption. I bet you're correct.
@phucphucgames78973 жыл бұрын
These locks are hard to pick. So hard in fact, I pick a whole ring of them while I pay attention to other things.
@ginger888953 жыл бұрын
I too sometimes inadvertently pick my nose open when I have a nasal congestion, but locks? Holy
@HanSolo__2 жыл бұрын
@@ginger88895 I laughed so hard reading both of you :D
@haramcracker2 жыл бұрын
@@ginger88895 LMAO
@bradameerbeg21542 жыл бұрын
Yeah… I loved that remark….
@jasmijnariel2 жыл бұрын
That was sooo funny😂
@ShawnTheMidget2 жыл бұрын
This video is hilarious for several reasons: 1. The fact that he has a keychain full of locks instead of keys 2. The fact that he picks those locks just for fun while watching movies 3. The fact that he said "I know a lot of you are probably thinking..." followed by some random lock picking jargon.
@metzger58502 жыл бұрын
But fuck that cord is robust!
@djwarren50812 жыл бұрын
😂
@bobfels53432 жыл бұрын
whaha thx for the laugh, great list lol
@nekoprincess41302 жыл бұрын
Lookup video 182 and you'll see how many keychains of locks he has
@tee25672 жыл бұрын
@@nekoprincess4130 Yeah, I actually thought 182 was a parody until I watched a few more of his videos (and compared them to other skilled pickers like Bill).
@thatstranger61142 жыл бұрын
Masterlock: A maker of fine practice locks for lock picking hobbyists.
@Drew5772010 ай бұрын
I can just imagine lpl watching the notebook with mrs. Lpl and while she’s bawling her eyes out he’s just quietly saying to himself “click out of 3, ooh 4 is binding” 💀💀
@h20deliriousfan824 жыл бұрын
Imagine robbing his house and seeing a safe with 20 locks on it. You spend a full day getting in and your realize he just has locks that protect his locks..
@juanbaclavab3 жыл бұрын
Those are decoy locks locked in a decoy safe. He keeps his real locks hidden somewhere else locked with real locks
@lazyer05113 жыл бұрын
And inside the safe... more locks
@ytfakemail3 жыл бұрын
But will he use the bad locks to "secure" the good locks in the safe, or use the good locks to secure the bad locks?
@trevortaylor81823 жыл бұрын
@@ytfakemail i suppose that is the great philosophical question of our time.
@I_Play_Game_1233 жыл бұрын
@@ytfakemail the LPL safe lock paradox
@TheAdatto4 жыл бұрын
Imagine him sleepwalking and picking all locks in the neighbourhood
@GummyBearRacing4 жыл бұрын
While mumbling to himself "this is the lockpickinglawyer and today we are showing how easy it is to open my neighbors doors"
@matthewnoybn66564 жыл бұрын
You wake up and front doors open the cat is in the now open safe and that box in the attic full of mags your grandpa lost the key to 23 years ago is layed out for the world to see.
@itsmejak78884 жыл бұрын
Click on 1 small click on 2 3 is binding
@theredvelvetyfox88144 жыл бұрын
I'm sure he would also give his neighbors better locks to challenge his sleep walking self cause an easy lock that can be raked open in moments is no fun past the first time
@NightVisionOfficial4 жыл бұрын
Lol
@kenbrown28082 жыл бұрын
the additional pin(s) are not for more security, it's to reduce the odds that someone will accidentally have a duplicate lock in a multiple person lockout situation. complex operations can have a dozen or more LOTO locks on one piece of equipment.
@nthgth2 жыл бұрын
That makes a ton of sense. Another comment also suggested the weak body is specifically so you can easily cut it off in the fairly common event a contractor finishes and leaves while forgetting to remove the lock.
@johnrobertson75832 жыл бұрын
YOUR lock is supposed to have YOUR name on it....YOUR key isnt supposed to be inserted in someone elses lock...that makes two tons of sense...
@smashmaniacs2 жыл бұрын
I use those plastic LOTO locks at my job everyday, and the reason why we use them is because they can be broken open pretty easily if someone forgets to take them off and leaves with the key. Not sure if that's why they're designed that way, but at work they're pretty much just to remind someone that an area or piece of equipment is locked out.
@JustTrollingYourButt3 жыл бұрын
Netflix and Pick? Goes to the dates house - “You got any good locks I could take a look at?”
@osco43113 жыл бұрын
No, my last boyfriend was the LPL, and he picked my chastity belt in about 45 seconds. The rest of the night was much longer. I mean, um... sure?
@splosh20703 жыл бұрын
@@osco4311 45 seconds, that must have been an amazing lock
@cameronjadewallace3 жыл бұрын
.......... And now I have date ideas!
@1014p3 жыл бұрын
@@cameronjadewallace well see this story online soon...
@bensoncheung28013 жыл бұрын
888 likes
@m.anthonyc.87615 жыл бұрын
Woman: Hey, wanna watch Netflix and Chill? LockPickingLawyer: **Grabs ring full of Lockout Locks**
@bennettgraham96374 жыл бұрын
Bro he has a wife
@m.anthonyc.87614 жыл бұрын
@@bennettgraham9637 would you like me to put "Wife" instead of "Woman"?
@bennettgraham96374 жыл бұрын
M.Anthony C. You don’t need to change it
@sabretechv24 жыл бұрын
Donald Trump you’re an imposter the real Donald Trump isn’t autistic
@bennettgraham96374 жыл бұрын
sabretechv2 you sure bout that?
@stancetv20052 жыл бұрын
Coming from someone who has over a decade in the oilfield industry, my guess behind the plastic body would be for economic purposes. These are used as safety tools to keep someone from starting up a unit, rather than keeping someone out of your belongings. Considering companies purchase these sometimes in hundreds or even thousands at a time, the plastic must save some money. Not to mention how often they get lost or stolen by employees.
@chris24678 Жыл бұрын
Then why make it such an advanced lock? He says it's got 6 pins, with security pins. Then goes through all the expensive locks, and none of them have anywhere near as good security on pins.
@reillywalker195 Жыл бұрын
@@chris24678 Making the lock tough to pick means it can't be removed easily by non-destructive means without its key, which should thwart any unauthorized removal of it since a destroyed lock would provide evidence of such.
@bugdozer2 жыл бұрын
If there was an incident at a LOTO job site and tampering was suspected, a broken or cut lock is far more obvious than one that had been picked. When my sig is on a LOTO, the last thing I want is someone to easily pick the lock, cycle the power, pop the lock back on and exit the area. That could make an investigation very difficult.
@SaznizamSazmee3 жыл бұрын
LPL doesn’t have a set of house keys. I imagine he just brings his picks everywhere and hotwires his car every morning
@cristianruggio82303 жыл бұрын
Bwahahaha lmao lol omg hahahaha
@jannieschluter96703 жыл бұрын
MacGyver, is that you?
@LucasMartinsS3 жыл бұрын
By the way, has he ever picked car doors locks or even ignition?
@starstencahl89853 жыл бұрын
@@LucasMartinsS Be did pick a trunk lock of some Mazda
@famousbowl99263 жыл бұрын
Steering still locks up... .
@Gaunerchen3 жыл бұрын
Master Lock is just trying to balance their locks. If a lock had maxed out stats, that would be overpowered. Therefore they balance their locks with strength and weaknesses to promote variety in the lock meta.
@acycle21243 жыл бұрын
Underrated comment
@raz8023 жыл бұрын
I literally thought this, my brain is so full of trash from video games and ttrpgs.
@CallMeMimi273 жыл бұрын
I was thinking the same thing. But is still a really retarded thing to do in Outside.
@tragan14423 жыл бұрын
lmao they do it so they can sell more locks
@hulksmash34293 жыл бұрын
Waiting for one one that has maxed out Intelligence and Strength
@scrappy4092 жыл бұрын
Reason: it's a breakaway lock. It is made to be snapped off with a simple tool, like a pair of pliers, in a hurry. The sophisticated core is a deterrent. It's there to ensure the lock wasn't removed in a malicious way. If you don't have they key, but someone is getting cooked alive because a valve didn't hold or a line blew, you need to secure a line NOW. No time to find the guy with the key; you can bypass it in a hurry. If it was a simple lock, it could be picked easily and quickly by someone with malicious intent. So the core is there to help raise the question: "Why was the LOTO removed?", if it was removed improperly.
@dimanetov18072 жыл бұрын
Ok, that explains the weak lock with the good core. But why the strong locks with worse cores?
@bragnir2 жыл бұрын
@@dimanetov1807 Those locks are difficult to cut. If you lose the key and you want access to your property, you'll need to hire a professional locksmith. Simpler core = more cances your local locksmith will be able to open it in a reasonable amount of time and not cost you an arm and a leg. Of course, this **does** open up the danger of thieves with simple tools and a passing knowledge on lockpicking....
@scrappy4092 жыл бұрын
@@dimanetov1807 they didn't listen to the LPL 🤣
@marcob82942 жыл бұрын
Sorry, but that is a stupid reason. You NEVER lock something what could be so impotant that it could save a person or a proces. I am a electrician, I lock switches so there is NO WAY that someone turns the switch on, If you work with valves and you don't want anyone to turn it on, you lock it. Locking things keep you safe, if you lock something that could save someone's life you are STUPID, don't use a lock, use a permanent human watch, who can turn something ON in case of an emerency. Like you say, no time to find the guy with the key, you can bypass it in a hurry,..... yeah, by finding the guy with the pair of pliers ????
@mattdieter56032 жыл бұрын
It has far more to with variety and cost. Having that many pins means that many more possible combinations, and if you have a company with 100s of people who need LOTO locks, you need to have a unique key for each person. The plastic body just makes it cheap.
@beavchuck35142 жыл бұрын
As somebody in the construction industry the best reason I can give is if something happens to that worker who has the key and the key is lost, a set of bolt cutters can get everything up and running again with minimal effort. Most of the time these locks are nearby sensitive switches and equipment and you don't need to be struggling to get them off.
@Konzon3 жыл бұрын
Sees video name: masterlock Sees length: 7 minutes Nonono, this can't be right.
@DstrtdSmL3 жыл бұрын
@dustybroom16 you must be fun at parties
@noiz55783 жыл бұрын
@dustybroom16 you would be fun at parties
@samrs20103 жыл бұрын
@dustybroom16 Just take the L and move on
@ambidexter20173 жыл бұрын
What a wonderfully irrelevant flame war we have here! Please, do go on.
@flamingamer16593 жыл бұрын
Wait what happened here?
@thothrax56213 жыл бұрын
A lot of people here seem to be missing his point quite dramatically. He's not saying it's inherently stupid that these LOTO locks have really good cores and terrible bodies, he's saying that it's crazy that all the other locks Master Lock make for actual security purposes have terrible cores when this clearly shows that they have the technology and knowledge to produce some really good ones. He's saying that it's weird to waste these really good cores on locks where it doesn't matter as much at the expense of their security cores
@videodistro3 жыл бұрын
It's simple, really. it's all about liability and lawyers. They would more likely get sued over someone's death than the theft of a bicycle. So, they go with the cheaper option where possible. Not mysterious at all.
@nategillette38633 жыл бұрын
@@videodistro I would also say that someone less familiar with locks would judge the lock purely based off of its looks. Because of this they can get away with selling tough looking locks with weak cores
@fryloc3593 жыл бұрын
Most people don't pick locks, they cut them. Now if you are in a factory where 1000 people have LOTO locks, you definitely don't want multiple copies of a key floating around.
@frutt5k3 жыл бұрын
The solution to this big problem is : put your name on the lock. If there is a lock with your name on it on the LOTO stack: remove it. If there isn't: do not remove a lock. Not even if you tried all 100 locks with all of your 10 keys.
@DDracee3 жыл бұрын
They only needed the 6pin core to meet industry security standards (thus the other LOTO locks without the 6pin core). They have no such requirements for "civilian" locks. In reality, a lock isn't really that much more secure with a "better" core. Forced entry through lock picking is extremelyyyyyyy rare outside of low skill methods like raking and bump keys. If someone had the skill and patience to "properly" pick your 5pin, he most likely also has the skill and patience to pick a 6pin with security pins. Most people try to break the lock, thus the sturdy body on the more expensive locks. Putting any more effort into the core then the bare minimum to combat low skill attacks is just a waste of money for the R&D.
@iwishyouwould69372 жыл бұрын
Lockout tag out is practiced mostly by electricians for "locking out" electrical circuits aka turning them off and then tagging it with name and phone number. If this circuit was somehow to get turned on while getting worked on someone could die. Not designed for anti theft. Power tools are every where. I could cut the shackle off with my linemens aka side cutters. Other companies make lockout tag out locks with a picture of the person attached on shackle with "Do not turn on, my family depends on me" written on lock body.
@seno55302 жыл бұрын
Holy moly, how dramatic!
@j.p.vanbolhuis86782 жыл бұрын
@@seno5530 It happens more than you think For example in the USA alone, between 1992 and 1999 (i.e. 7 or 8 years) there were ~2500 fatal occupational electrocutions. Most of these (i'd guess upwards of 98%) occur on low voltage circuits. So that is about ~300 per year over this period.
@MrEightythix2 жыл бұрын
They are also used in Underground mining for locking out dangerous equipment, if you need to go into the area that has been locked out you have to lock on first, and everyone needs to personally remove their danger lock before the equipment can be re-energised. they are for protecting human life from accidents, not for protecting valuables from thieves.
@Zargabaath2 жыл бұрын
@Nick Paul My man came back to the exact same comment a week later just to double down on calling "Se No" an idiot. What an absolute chad. edit: Unless they deleted their comment. Fuck, I'm tired, idk why that wasn't my first thought.
@plana1344 Жыл бұрын
As otherwise mentioned, we use these for safety in the oilfield for, "Lock out, tag out" of valves and pumps when equipment is shut in or being serviced. Where these are used can often be bypassed with a wrench or screwdriver to disassemble the handle or leaver leaving the lock intact. What I leaned from this vid is that they have great cores that will help prevent accidents and serve their purpose perfectly. Well done LPL, always interesting and informative.
@xtalviper4 жыл бұрын
He doesn't like movies that don't have a lot of tension.
@JoeBob234 жыл бұрын
HAYOOOOOOOOOOO
@RWBHere4 жыл бұрын
But he has a liking for shackles.
@renakunisaki4 жыл бұрын
Some people have a hard time picking a movie...
@EikottXD3 жыл бұрын
🏆
@greystratford20393 жыл бұрын
HA HA HA HA HA😂
@joostvanarragon56393 жыл бұрын
'I can't believe he didn't cry at titanic' LPL: 'Okay, nice click on 3'
@GeneralG18102 жыл бұрын
🤣🤣🤣🤣🤣omfg such an underrated comment
@jasmijnariel2 жыл бұрын
He would opened that gate instantly, in stead of needing to dive for the keys on the floor! All he needed was Rose her hairpin🤣
@DealerDream822 жыл бұрын
At the end of the movie the LPL has the Heart of the Ocean in his pocket…. Safe was easy pick.
@AsbestosMuffins2 жыл бұрын
@@DealerDream82 na he'd have a pile of old british padlocks in the safe
@AbbeyB77 Жыл бұрын
The most secure part of these locks, honestly, is the LOTO policy that goes with it. When trying to remove an LOTO lock without a key is a fireable offence without several pages of paperwork, it doesn't need to be pick/break proof. We had a bit of a problem with people confusing which lock was theirs since sometimes machines can have upwards of six locks on them. I bought a sheet of stickers from the dollar store and it looks odd, but it works.
@gbnmb2 жыл бұрын
This was probably done to provide as many possible key variations to prevent multiple people from having the same key, since it’s a lockout lock and they are generally key different. It provides an extra level of safety to ensure a lock isn’t accidentally removed and equipment re-energized.
@reillywalker195 Жыл бұрын
Since it's a reasonably tough lock to pick, it's also not easy to remove non-destructively, so any malicious removal of it's likely to be discovered.
@DoubtlessCar04 жыл бұрын
Him picking locks while watching movies as practice totally explains why he can pick a lock in 30 seconds and say, "that's a good security lock"
@flugenegu77774 жыл бұрын
He's got a talent for it, too.
@leporid2574 жыл бұрын
he also tries to pick the locks a couple times before he films
@ludaka972BG3 жыл бұрын
I wouldn't be surprised if he is picking locks during sex
@danhammond84063 жыл бұрын
@@ludaka972BG chastity belt is no challenge.
@dirtyblueshirt3 жыл бұрын
@@danhammond8406 what others call a chastity belt he calls foreplay.
@prombo64 жыл бұрын
I've worked with LOTO locks for years, and can comment on why the design is great for me and my coworkers. The shackle is un-hardened so an authorized Safety team member can use standard bolt cutters to chop it if someone's lost their key. Additionally, we use these so often that we wear them on our belt, so the lightweight plastic-exterior design really helps to not tear up your pants or bounce around too much. Finally, we use these locks several times per day for years, so perhaps the extra pinning helps the keys stay firmly in place when we're walking around with the key in, or continue to safely function. Or perhaps there was some court case where someone picked a lock and someone got hurt. I'm not totally sure, but that's the information I have!
@RupturedHighlights4 жыл бұрын
I’m here to back this up as well. Everything he says here I can attest to. I work with automated robots, which require constant trouble shooting. This requires a lockout every time I have to enter the automated cell, I use this same exact loto lock as many as 50 times in one 12 hour shift.
@deanrobert86744 жыл бұрын
So true, plus the Weight hanging off a MCC mains power switch handle. When you have scissors plates and 20 locks hanging off one, all that weight over time can damage the switch mechanism internals. the new plastic locks came out after 2 people died and 3 injured because the switch was damaged energizing a conveyor that they were working on. Early 2000's in Australia.
@parkwood253114 жыл бұрын
I am a non-lock picking lawyer who does labor arbitrations and thus I know a fair amount about LOTO practices. All those reasons are spot on. Also note that The “one man one lock“ practice means you can have 10+ locks hanging off the same switch if it’s a big project. Size and weight matters. Finally, on the management side, no one ever got in trouble for paying an extra dollar for an LOTO lock so I won’t be surprised if someone at master lock just said, what the heck put the good core in there we can charge extra for it ;-).
@NolorW4 жыл бұрын
Thanks for all the specific insights, very interesting, but I don't think that was ever an issue. Everyone can imagine why plastic locks could be useful, problem mentioned is more at why they did not put such a good core (as LPL claims, I got no clue about it) on any of the premium locks that are supposed to provide more security when they obviously are able to make it :P
@RupturedHighlights4 жыл бұрын
Felix Safford never claimed to be one, only stated that i use this lock at my place of employment and my experience with it.
@pioneer55552 жыл бұрын
We use this exact lock at my workplace working on trains. We often have to carry around 3+ of these when going out to jobs. It is very light so convenient to carry. If we had to carry those solidbody locks around it would get really difficult so I can understand why the design is so lightweight. They are very reliable I've been using the same ones for 10+ years.
@teenapittman42412 жыл бұрын
Glad that I saw this video. My grandaughter-in-law needed to chain and padlock the driveway gate while my grandson was working a shutdown and this was the type of lock that she found in their tool shed. I was skeptical cuz it looked so plastic and flimsy. Glad to know that it isn't flimsy.
@db3362 жыл бұрын
It is flimsy. You can almost break it with your bare hands. It's not for security.
@johnrobertson75832 жыл бұрын
Yeah you should watch the video again...with the volume up...
@RhumRunner413 жыл бұрын
As a former LOTO supervisor, I can chime in on this one. The 6 pins core allows for a larger number of pin combinations which means that my 375 locks all had a different key. Although my department had the lion’s share of these locksets, my company had other departments & sections that each had their own LOTO locksets, each with their own keys. That way, unless you had the key, you couldn’t open the lock. These locks are only there as a reminder that the device is not to be operated. As such, there is no need for the locksets to have hardened shanks or body. The problem is that keys get misplaced, lost, or even broken. After a thorough investigation, the only resort may be to cut the lock The LPL didn’t work for us and a locksmith would cost more than buying a new lock. It’s all about economic options.
@franzcruz85413 жыл бұрын
That's a very great point and i do get why the body would be weaker for easier cutting. It may also explain why some hardened locks have weaker cores so that it can be picked easier aside from cutting it which would be way harder. But the point of the Paradox he makes it the same point you've said. Masterlock has proven they have the knowledge and capability to make great lock bodies and strong cores, but they haven't extended much on that regard which always leave most of their locks a lot of exploits. In specific cases there are great uses for weak body and strong cores or vice versa but i think the point here is that generally, Masterlock has proven they can do better but is unknown as to why they don't.
@indyhayes39793 жыл бұрын
Also the plastic body resist possible electrical discharge.
@davidmenasce66143 жыл бұрын
I was thinking along this line. Lock out locks are to give the service tech the confidence to know that his key is unique and no one will come and remove the tag because their key fits, while his hands are in the machine They're not concerned with people lock picking the lock or needing to break it.
@franzcruz85413 жыл бұрын
@@iAmKilljoy Fair point and i think i get it a lot better now. Thanks for clearing it up and although i get the point of a lock having its own weakness for certain areas, I didn't think about it nor was knowledgeable enough for its uses. Thanks!
@Super1Rad2 жыл бұрын
@@davidmenasce6614 If they're not concerned with people picking it why would it sport 6 security pins over standard pins?
@NCRRangerVet474 жыл бұрын
When you're watching a movie with the boys and one of em just starts picking locks
@RandmAnimal4 жыл бұрын
suddenly fixes long broken door knob
@goawayrayy4 жыл бұрын
The guy in front of you just says “1 is loose, 2 is binding; click out of him, got a tiny click out of 3...”
@King.-Arthur4 жыл бұрын
Hey, gotta grind experience points to level up Destruction spells sometime
@Orangegang1haterz4 жыл бұрын
Pretty badass tbh
@vendybirdsvadl74724 жыл бұрын
And then the second one Is hacking a computer, the third one Is hotwiring car And the fourth one Is hacking a keypad
@NFSHeld2 жыл бұрын
Master Lock: This is our highest security core. Customer: Oh, then this goes into water treatment facility locks? Master Lock: No, those get weaker cores, as they already have a strong body. Customer: Uhm, okay... So what is this used for then? Master Lock: Our LOTO Padlock. Customer: What would that be? Master Lock: It's a fancy Post-it, basically.
@nathanmonahan61579 ай бұрын
This particular video still resonates with me when looking for a lock. This video is the single reason I have watched so many LPL and BB videos. This single core has shown me how a lock intended for a $150 bicycle can be made secure enough to protect several thousands. I use this knowledge to smith my own locks, as well as play with home made picks. I even have a set of my own home made pins. About 40 total between key/driver pins and bags of almost every manufactured pin size. I'm every bit of a low level hobbyist, and I can make better locks from my scrap bin than what master sells.
@knightsoul24304 жыл бұрын
the body of a peasant but the heart of a knight, this little lock would be a nice movie protagonist
@unclesam88624 жыл бұрын
Bruh
@AssassinIronMan4 жыл бұрын
KnightSoul Wow! How’d you think of that! 👍
@ShradeCorelancer4 жыл бұрын
All the peasant need is to put on a nicer armor. Btw nice username
@MonsterPumpkin4 жыл бұрын
LOL
@classydays434 жыл бұрын
Dreamworks: *furiously taking notes*
@Explosives2383 жыл бұрын
I want to see the LPL review movies based on how many locks he was able to pick during the running time. A better movie will be more distracting meaning less locks picked. I think it would be a really good scale.
@cerealkiller71433 жыл бұрын
He will need to stock up for Ben-Hur.
@killerofold2 жыл бұрын
I rate this film 5 picks out of 10
@TheAyanamiRei2 жыл бұрын
I don't want it out of any numbers divisible by 5. That being said, this sort of idea would be great. Have a Livestream movie or show while he picks locks would be fun too.
@lelandashmore95222 жыл бұрын
It would have to be ratio though
@JoeOvercoat2 жыл бұрын
😂🤣😂🤣😂🤣😂🤣😂
@jerrytery1232 жыл бұрын
We use these at my work alot, the only reason I can think would be a good reason it has strong core. The reason would be that you don't want someone discreetly opening the lock, if someone snaps or breaks the lock it's totally disabled and clearly something is wrong, while if they pick it then flip the switch then re-lock it , then it could be perceived as still working properly but it's actually an unsafe scenario
@sentropez1337 Жыл бұрын
If they have malicious intent but are planning ahead, couldn't they just break off the lock, flip the switch, and then put on a new LOTO lock of the same type - either one grabbed from storage, or one they purchased themselves?
@jakeyounglol Жыл бұрын
LPL is the type of person to open their house locks with a lock pick instead of the keys
@thebrad11343 жыл бұрын
Fun fact: The way Master Lock makes their locks is very similar to the way the Empire makes their death stars.
@JohnSmith-fq3rg3 жыл бұрын
I don't see any anti starfighter laser turrets lining the keyway though...
@spvillano3 жыл бұрын
I actually would prefer my LOTO lock this way, were I still working in a field where I needed one to well, keep me alive. Cutting off a LOTO lock is a really big deal, legally, a serious OSHA violation, so on the rare occasions it has to be done, tons of documentation and management reports. Way too many workers got killed without LOTO locks, so OSHA fines are serious when they're tampered with. But then, there's the wiseass who'd try to pick one... The dead core tends to foul up a novice, the quality core defeats a novice. My first took me a few tries when I was starting out, then popped through in a few minutes on the first success. Counterintuitively, the dead core actually makes releasing a false set or overset easier without necessarily dropping already set pins... But, for a novice, a tight lock full of security pins is like Homer Simpson trapped in a yard full of rakes. ;)
@vladiiidracula2353 жыл бұрын
The empire actually designed the Death Star very well however, and even in the Star Wars unversae, it was very unlikely that it would be defeated. Even within the force, it’s very unlikely that the exhaust pipe could have been defeated.
@submittedbymail3 жыл бұрын
@@vladiiidracula235 you sound just like Han Solo in the first movie.
@michaelpettersson49192 жыл бұрын
@@JohnSmith-fq3rg Nor did the rebels. Those turrets where designed to fight capical ships. That is why they where to slow in turning and fireing to hit the nimble starfighters.
@zip78066 жыл бұрын
The strong core is so the wrong key does not accidentally open the wrong lock by the ignorant new guy on the crew . The weak housing is so the lock can be busted open in an emergency. I worked in the engine room of a commercial tugboat, we had these all over the place.
@WalterBurton5 жыл бұрын
But this doesn't explain why the strong core is not also available in the strong housing LOTO locks. That is the "paradox."
@overtaxed795 жыл бұрын
@@WalterBurton the theory of marginal returns?
@Nefariousrouge5 жыл бұрын
I would add that in the environment that these are being used, tools to "break" the lock are so readily available, the need for an extremely robust body/shackle isn't the top priority for design.
@Alex-ve1og5 жыл бұрын
You all are missing the point, why in the hell would they not have this same core in their other locks instead of having the rest of their lineup which are used to prevent theft have these cores or similar?
@overtaxed795 жыл бұрын
@@Alex-ve1og It is their option to sell whatever, and our option to buy whatever. Why make it more complicated?
@CanadianDirt Жыл бұрын
From the viewpoint of someone who’s a novice with locks but experienced with industrial equipment, here’s my take: 1. 6 pin core to increase the total number of key combinations. Repeating key combinations within a plant or even a company is usually a no-go. 2. High security pins because industrial equipment can vibrate A LOT. I have first hand seen a lock open on its own due to nothing more than vibration. 3. Plastic body because it is non-conductive (some other lockouts have rubberized coatings).
@WhiteLesPaul2 жыл бұрын
As a complete noob starting picking today, I used one of these as my first lock, as well as a random Brinks lock I found. I would just like to mention for the Master Model 410 LOTO lock, once picked, do NOT over rotate the core past 90 degrees, for if you do you will drop all of the key pins into the lock body. Spoken from experience, that satisfying clunk of a lock picked followed by the jingle of all 6 key pins falling out filled me with a lot of emotions. Lesson learned. Thankful this video was here for reference. As for the core, can confirm, 5 spools and 1 double serrated on 5. Also, picking using LPL Genesis Set.
@BlackPeter2033 жыл бұрын
This one jumped out at me because I'm manage safety in a semiconductor lab. I think we have a "little column A, little column B" thing. 1. Weight. This is a factor, not because of carrying them, but because you might need to attach it to something small. For example a household style circuit breaker, a heavy lock could damage the breaker or the devices used to attach to the breaker. I have seen cases where the LOTO loop on a valve was broken through over time by the lock hanging on it. There are also cases where multiple locks are attached to the same point and you don't want 10 pounds hanging from even a robust point. 2. Cost, these locks go missing, get cut, get damaged, as someone who has to maintain a budget I can't spent $10000/year on locks. These buggers are expensive anyway, so if Master saves me $5/lock I'm grateful. 3. "Strength" defeating a LOTO usually results in termination, so they don't have to be strong. Seeing a red lock generally implies "mess with me and get fired", that's where its true strength is. 4. Secure core. I think the high end core is for good reasons, as I mentioned a decent sized site could go though a lot of these, I keep 25 new ones in my desk at all times, the EH&S manager probably has 100. So a decent core means more randomized keying. You don't want the wrong key to work, not when the result could be death (or many many deaths if it involves toxic gas release ). You also don't want the core to wear and allow the wrong key to work. Finally, despite the threat of termination, you don't want it defeated too easily, key bumping etc. 5. Authorized defeating. People lose keys, we have had people leave town on vacation and forget to switch locks, sometimes a LOTO can be in place for years. So the lock should be easy to cut when appropriate. It's also possible the lock is in a position so that you can't access the hasp so being able to cut the body easily helps in these cases. Anyway, that's just my 2 cents from 35 years in industry.....
@Tranarpnorra3 жыл бұрын
I agree with everything you said. At my previous work, as an industrial electrician, we could easily have 200-300 locks or more used during a single day during maintenance shutdowns on all the production lines. Electricians, mechanics, safetey officers, production personnel, external contractors and more. Many locks got cut and replaced with new ones for a variety of reasons during a year so a good number of combinations on the cores are essential. These red ones are only one type, we used them for electrical LOTO points, there are others with different coloured shells that represent different kind of energies you lock out, e g blue, yellow and green. I'm pretty sure all of the different colours have the exact same cores.
@forthphoto3 жыл бұрын
What would be the point of defeating them at a work place? I mean apart from trying to kill or hurt someone why would someone do it? And if for mentioned by me reasons then termination would be this person least problem.
@daniels-mo9ol3 жыл бұрын
@@forthphoto my thought exactly, if something is locked a worker probably wouldn't unlock it unless their intent is harm or malicious, in which case a plastic body wouldn't suffice. Having high core security doesn't make sense to me at all if the lock body does not live up to appropriate standards.
@Tranarpnorra3 жыл бұрын
@@forthphoto The point is so no one else unlocks a lock by mistake. It has nothing to do with malintent.
@bryantwalley3 жыл бұрын
This is exactly why the lock exists.
@Fajowski504 жыл бұрын
**LPL at the movie theater concessions** “Hi what can I get for you?” “I’ll take a large carabiner of locks please” “..........”
@racecarthedestroyer71923 жыл бұрын
"Hold the wafer cores
@keithcronk79803 жыл бұрын
& 2 BOXES OF MILK DUDS
@microwiz3 жыл бұрын
"Oh and I forgot my rake, do you have any rakes...? No?"
@jasonsprouse28033 жыл бұрын
That's exactly what ran through my head, some dude at a movie theater picking locks. SSSHHHHHH!
@LClarke3 жыл бұрын
@@jasonsprouse2803 Maybe that's what he practicing....not picking the lock, but picking it quietly :)
@youhaveamonkey Жыл бұрын
The plastic is both non-conductive and non sparking. Both are really important in an industrial environment. The six pins probably have to do with the number of key combinations possible. I use them a lot at work.
@adamphelps7083 Жыл бұрын
The community in these creators comments is one of my favorites on KZfaq. Like the "tuxedo tshirts" of commenters. Lol 😊😅 what I mean is, everyone is here just to have a good time.... but there are hardly any trolls and *for the most part* people don't act or speak disrespectfully. Wholesome jokes and lighthearted fun. Formal, but here to party too.
@genericprofile23814 жыл бұрын
"Do not remove" People trying to break in: *darn*
@like300foxes4 жыл бұрын
XD If that worked, I'd just get a sticker that said that. But no no it's for Lockout Tagout for work purposes :p cause sometimes idiots are like "hurp derp, it says it's broken but it turns on anywys!" since it's not locked and then a huge problem occurs. :
@M0rzone4 жыл бұрын
Yeah a huge problem or someone gets crushed or something...
@annikabunnel7434 жыл бұрын
Cue the “this sign can’t stop me because I can’t read” meme
@TheBurningWarrior4 жыл бұрын
Swiper no Swiping!
@Syntheticbreed4 жыл бұрын
I had a buddy in the Navy, he was a radar technician. He secured all power and did all of his lockout tagout procedures properly before he entered into one of the high power radar arrays to do some work. Here comes some jackass who flips a power switch for it and electrocutes my buddy. Somehow he survives. Dude no has almost zero motor control in his body now and is permanently 100% disabled. Do not ignore tags or locks that say danger on them.
@jkenny14 жыл бұрын
I think master lock exists just to troll this man.
@dffgacha74524 жыл бұрын
I think it's the other way around.
@RWBHere4 жыл бұрын
@@dffgacha7452 I agree: This man exists to be trolled by MasterLock.
@satoshiogstronghandnakamot88793 жыл бұрын
2 outta 10.
@morgansinclair63183 жыл бұрын
You might say they are Master baiters.
@marvindebot32643 жыл бұрын
Masters are good locks in 99% of situations, their physical security is very good and TBH how many break-ins do you hear about where the lock was picked? Core wise then yes they couldn't really do much worse.
@hermanvisser40342 жыл бұрын
Your videos are quite fascinating. The answers to your questions are simple. Master sells these things by the hundreds of thousands, and the sets of 6 locks for each worker is supposed to be unique so that no other worker on the site can open the lock. The fragile construction is so that if the worker has flown home and cannot return to remove the lock he forgot to remove at the end of shift, then a supervisor can use a bolt cutter to remove the lock. There are usually disciplinary action taken against a worker that had his lock forcefully removed by management. This is the case in Australia where people are quite anal about safety precautions.
@polycarp1334 Жыл бұрын
Omg!!! I have been trying to pick my loto lock for years. Just on my breaks and such. Today I finally did it after watching how you did yours. Thank you. It’s so exciting to watch it finally turn. Lol.
@KailuaDoug3 жыл бұрын
You have officially scared me with that caribiner full of locks that you use to practice picking while watching a movie.
@Adam-ln4og2 жыл бұрын
We all have our ways on keeping busy.
@ihatecrackhead2 жыл бұрын
he's a box away from a houdini act
@VladZ9722 жыл бұрын
@@Adam-ln4og How do you keep busy?
@Adam-ln4og2 жыл бұрын
@@VladZ972 I work 2 jobs, hit the gym, and write books.
@VladZ9722 жыл бұрын
@@Adam-ln4og So you’re saying you don’t keep a carabiner full of locks to practice on to keep busy?
@therealdontclickme4 жыл бұрын
Panic mode; Wiring up a 3 phase relay when you hear this from the breaker box, “Number 2 feels good, 3 is binding”
@krullachief6694 жыл бұрын
Or worse, three phase motor connected to a conveyor belt system. You got both electrical and sheer force there.
@Vazgen_Ghazaryan4 жыл бұрын
:D
@wild-radio73733 жыл бұрын
Aw ship... LoL, cringe!
@trevortyler36243 жыл бұрын
As an industrial electrician, I found your comment to be hilarious.
@jamesklebenow68852 жыл бұрын
I doubt you’ll see this but, I work in an industrial setting and my guess would be that like you said they wanted a core with plenty of options, maybe a factory with thousands of employees and each employee expected to carry multiple locks, but being a LOTO lock you don’t need security you just need a glorified sign saying somebody is inside this machine. You do however need to be able to remove the lock easily if the owner loses a key, breaks the key or say they go home and forget to remove the lock. I know the keys aren’t exactly delicate but if you lock and unlock a locks dozen times a day every day for years on end the keys eventually get worn pretty heavily. I’ve had multiple locks cut off machines for all these reasons.
@darrenteasdale17952 жыл бұрын
These looks are placed on lockout switches that are generally power switches made of plastic and I think it's more to do with electric insulation and anti tamper than security as the switches can be removed very simply with a screwdriver
@matsteele64377 жыл бұрын
in Australia these loto locks are the standard because technicians lives are at stake. industry standards require a lock that is difficult to tamper with but possible to remove. the theory is that it is too difficult for someone to pick open and remove then have someone switch on or turn the valve and later claim the lock wasn't on then replace the lock back to the switch. but is easily cut off if the lockout lock is left behind. so it's made to easily detect brute force attacks but remain strong against non damaging attacks or tampering.
@andrewevanoff11926 жыл бұрын
It's the same here in the USA. A special "lock removal procedure must be followed and documented each time a safety lock is removed.
@jimstanley_496 жыл бұрын
Best answer. Everyone else seems to address only half of the issue and get hung up on key diversity, or emergency destruction. Thanks.
@CGoody5645 жыл бұрын
I don't understand why anyone would consider this "difficult to tamper with".
@Cheesus-Sliced5 жыл бұрын
Cory Goodman like LPL said, its one of their best cores and full of security pins. Ergo not likely to be picked by an amateur
@mrtalos5 жыл бұрын
This does make the most sense. People tend to forget about the A-holes in the world who would do something like that.
@TotallyNormal-4 жыл бұрын
Hey you down in front - "STOP MAKING SO MUCH NOISE WITH THAT DAMN PILE OF LOCKS!!"
@cor9554 жыл бұрын
*LPL just beans him in the head with the now unlocked lock*
@Kittsuera4 жыл бұрын
"no problem. That was the last one"
@miokujou4 жыл бұрын
LPL: No problem I'll do your lock later
@sachinv50483 жыл бұрын
@@miokujou ooofff
@NoodleBear Жыл бұрын
Friendly reminder if you see one of these out in the wild: Do Not Touch! My dad's an electrician and was working in a factory being gutted and renovated, and of course had turned off power and locked out the breaker panel using a similar lock. Turns out that the offices attached to the factory weren't wired correctly when it was built, and one guy lost power to a single outlet in his office. He decided that was Unacceptable and so walked into the construction site, snagged some bolt cutters from somewhere, and Cut The Lock Off The Breaker!! My dad was, at the time, on the top of an 8foot ladder cutting through a 6inch conduit with a reciprocating saw. In short order he found himself flat on his back 3 feet from his ladder holding a now very dead saw, complete with smoldering saw blade. He needed stitches in the back of his head, and thank gods that's all he needed. If the power had been turned on ever 30 seconds earlier his hand would have still been directly on the bare conduit! He would not have survived that. Those locks are so absolutely important and should NEVER BE TOUCHED if in use.
@stevec3607 Жыл бұрын
That's amazing how a similar lock that's used in my work industry has a plastic body, when you can go grab several types of tools or battery powered devices and just cut the body away! I like knowing I'm protected fully when I'm the one inside doing work and relying on these type of locks!
@ahriman9353 жыл бұрын
Imagine how many locks he goes through during a single movie...
@RoyalSlashOasis3 жыл бұрын
Imagine how many locks he could pick while watching Avengers Endgame
@siddharth27963 жыл бұрын
@@RoyalSlashOasis why
@xXponyinthestarsXx3 жыл бұрын
Depends on whether he likes the movie, I suppose. "I rate this 30 out of 30 locks" (That's bad by the way)
@cameronjadewallace3 жыл бұрын
The answer is all of them. Literally every single one in the world
@Swimmer2183 жыл бұрын
"Hobbit" and "Lord of the Rings" marathon back to back. He'd probably break his locks and picks by that point.
@davidadams93244 жыл бұрын
My heart dropped to see the thumbnail with your name on it, showing the lock i trust my life and limbs to everyday. After watching I left more than content. Thanks from one on the line LPL.
@ralanham764 жыл бұрын
This is what I was thinking that the reason why it's so hard to open it because power switches can be deceivingly small
@RWBHere4 жыл бұрын
@@ralanham76 I bought one, and it broke within a week, after I picked it open, once, and very easily, (This was after trying, and failing, to open it on previous days.) I then operated it a couple of times with the key, after which it failed to stay locked. I'm fairly new to lock picking, so was understandably surprised at how easily it could be picked (not raked) open. Would not trust my life to such fragile locks, and shall not be buying another one in a hurry.
@septclues4 жыл бұрын
I’ll take ‘things that didn’t happen’ for 200, Alex.
@louisradico15113 жыл бұрын
@@RWBHere These things don't need to be pick proof. They're used on industrial equipment so someone doesn't walk by and hit the electrical disconnect while you're working on the machine. If someone is trying to pick the lock then they are literally, actively trying to murder you.
@drunkswithguns41243 жыл бұрын
@@louisradico1511 Not only that, but they would have to pick the lock off of the equipment that you are working on. Chances are that someone would see that person trying to pick a lock off of the energized equipment and go WTF lol. Picking is pointless anyway, anytime someone loses the keys, we just cut it off with bolt cutters. Much faster and less hassle.
@CheddarCheeseBandit2 жыл бұрын
The reason it has a seemingly secure pin setup is so that there can be MANY different keyed locks on a GIANT job site, so there are less chances of keyed alike locks, because if someone unlocked the wrong padlock, someone could die. If someone does lose their key, the bolt is easy enough to cut if everyone onsite agrees the lock should be cut. I believe, that the design and choice of features are specifically designed to suit the needs of certain buyers. I’ve seen all of them at different job sites, there is no security threat inside the job site, which is why a plastic body is ok. Great video!
@sexyfishy1002 жыл бұрын
As a former crew chief at a factory, our dept. had like 150ish of these. every once in a while you would have someone drop a key down a flume, or grate etc. and need to get one of these off of something. (After filling out a bunch of paperwork and whatnot, to get the OK to do so) we found out really quick the best way to get these open was a big old set of channel locks, and squeeze the shit out of them from both sides, along the seam. they fly apart and it takes literally about 1 second.
@EpicMel0ns2 жыл бұрын
Something tells me he has another whole ring of locks in his bathroom for when he’s sitting on the toilet
@3FIGNEWTONEATR2 жыл бұрын
Theres probably just locks everywhere. He doesnt do light reading, just light picking lol
@3g2i632 жыл бұрын
@@3FIGNEWTONEATR So another question poped in my mind while watching this. With the weight of ALL the locks he's got, how high are rated the floor of the buildings he live/work in? 500 kg/m2 ? 😁
@johnrobertson75832 жыл бұрын
And probably with options...like a master combo that can be shimmed or a chinese 6 key magnetic double dimple with triple trapping and an explosive...depending on whether its quick Twosie or a 15 minute strain session...
@michelealessandrini3421 Жыл бұрын
He probably has to pick a lock to open the WC.
@ScottiStudios3 жыл бұрын
2:28 This part always sounds like a really bad day at the dentist.
@nebelgeist3 жыл бұрын
got me laughing out loud really hard!
@HanSolo__2 жыл бұрын
XD
@dakat51312 жыл бұрын
"Oh sorry, I was just practicing picking this lock while examining your teeth"
@Knowyourbody2 жыл бұрын
Or a good promotional day at a brothel
@threesetstofailure99412 жыл бұрын
I would say that they design most locks now for saw, angle grinder, pry attacks which Master has been pretty decent with. They just don't see the picking as a main attack possibly. At least they don't seem to be focused on that side of it. But it is a little concerning when they have these nice 6 pin cores available cheaply and they chose to put a 4-5 pin basic core in all the top "Magnum" series.
@Hiznogood5 ай бұрын
I worked at several power plants as an operating technician and one of our duties was to secure equipment that needed maintenance, that could involve chaining and locking valves, removing fuses and open breakers etc and they all needed to be locked down and a sign with the correct work order number. The locks was all the same and all of the us technicians had the same key, so when the job was done anyone of the technicians could remove the locks when the job was done. The jobs could take hours, days or weeks so it would probably someone else then then one that had secured the equipment earlier that would be on duty. For all sake I could had found, say a faulty pump, switched over to a spare and then written a rapport on it and then secured it for the maintenance crew that would take care of it at day time. No one removed the locks without an ok from the maintenance crew as it could spell disaster and even life threatening danger.
@inertiaMS4 жыл бұрын
Feels like it's almost a tamper-proof seal in a lot of ways, it's easy to bust open in an emergency if needed, but not easy to open without any trace ie picking
@king999art4 жыл бұрын
@@ts757arse agreed, although in this case "leave a mark" would mean a sheared shackle or broken lock body
@peterstepanov80624 жыл бұрын
Why the hell would anyone pick a LOTO lock? As far as I understand, it's only there to tell people not to turn on the equipment, in case they don't see the warning sign or something.
@StraightOuttaJarhois4 жыл бұрын
@@peterstepanov8062 To make it look like an accident?
@baylinkdashyt4 жыл бұрын
This is an exceptionally thoughtful observation, and I deeply resent your having thought of it first.
@billybobjoe1983 жыл бұрын
@@StraightOuttaJarhois Hmm this locked machine turned on, bobby was up in the control tower, when it happened and was last on the scene after it was all over, the machine is locked in the off position. What an accident! Bobby's innocent!
@Furycrab5 жыл бұрын
Netflix and chill means a whole different thing for the LockPickingLawyer
@B.McMillan934 жыл бұрын
*GetPicks and Chill
@Fantasiado4 жыл бұрын
@@B.McMillan93 this man deserves a prize
@und42874 жыл бұрын
Netflix and P I C K L O C K S
@pujdo68724 жыл бұрын
Netflix and pick
@malfegore_70434 жыл бұрын
I mean, have you seen his wife's beaver?
@01MEGABOB2 жыл бұрын
I use these locks daily for my equipment. These locks have plastic bodies so they can be more easily destroyed. LOTO procedure prevents anyone, besides the person who applied the lock, from using it. If a person of missing and the lock needs to be removed there is a lot of paperwork and a lot of attempts to get ahold of the employee in question (so that we’re sure that they aren’t locked inside the equipment.) afterwards a pair of box end wrenches can be used to blow out the non hardened shackle. Or alternatively, bolt cutters are used as well. But the main reason is to make sure that the lock is difficult to pick, but easy to destroy.
@douglasmurphy6705 Жыл бұрын
I love that you will keep your hands busy during a movie with your hobby/craft. I do the same!
@matthewjackman84105 жыл бұрын
Nobody: LPL: Here is my keychain of the 7000 master locks I pick on the daily
@FleaOnMyWiener4 жыл бұрын
~2019
@TomFaical4 жыл бұрын
lockchain*
@Papperlapappmaul4 жыл бұрын
Hilarious and original.
@maximumdosage4 жыл бұрын
500 reps in the morning and evening
@1956willys4x47 жыл бұрын
I picked up one of these when I first started. because it was plastic I thought it would be a easy open. boy was I wrong.
@ussessexcv-91896 жыл бұрын
1956willys4x4 well now you have a practice lock
@dextrodemon6 жыл бұрын
same actually watching this video because I felt counter rotation and thought I must be wrong because its just a plastic lock I happened to have in the garage, also thought I must have miscounted the pins lol
@badsamaritan82235 жыл бұрын
A hammer will open this in seconds.
@RekzysTheTitan5 жыл бұрын
Bad Samaritan no, it was more like 23, but it was still quick
@503dcccccccccccc5 жыл бұрын
Same here. First one to give up on and first one to cut open to look. First and the last one I tried to put back together with only tweezers and my pick tools. No longer a set
@jakepin8909 ай бұрын
As a Pipe welder/Millwright, I’ve cut several of these LOTO’s off over the years using my “master key” (metabo) lol. Love the videos!
@clintdoolittle15762 жыл бұрын
HEY WHAT DID YOU DO TODAY. Oh nothing just watched a movie and picked 10 or 15 locks eating popcorn with Ms LPL lmfao. LPL YOUR FREAKING INCREDIBLE it's amazing to watch you pick these locks with so much Finesse I have not yet seen a video where a lock gave you a hard time would like to see it lol👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
@TakelGryph3 жыл бұрын
LPL: "...or in some sort of zone of danger." Sterling Archer: *inhales*
Masterlock R&D: “We just designed the most secure lock EVER!” The Board: “So it’s flawless?” Masterlock R&D: “YES!” The Board: “Garbage, throw it out.”
@soomer48442 жыл бұрын
Masterlock R&D: "DAMN IT!"
@watchrandomuser395onyoutube2 жыл бұрын
@@soomer4844 i sware i just saw you or someone with your pfp somewhere
@soomer48442 жыл бұрын
@@watchrandomuser395onyoutube Terrifying
@Photonic643 ай бұрын
To this day this is my favorite LPL video. Its an oldie but I still use these locks daily.
@BriTTish_kitsune2 жыл бұрын
I always love watching his videos, it's my asmr when I want to relax
@cup_and_cone7 жыл бұрын
The reason for the core is because you can potentially have 20+ people locked out at one time; we did it at one of my old jobs. With the generic 4-pin Master cores, you could definitely have some overlap where someone's key accidentally works on the wrong lock and they unlock the wrong lock...which could be deadly if you have multiple control panels. This is just their way of making sure keys and locks don't get mixed up.
@sebastiannielsen7 жыл бұрын
It shouldn't be deadly if the employees take some responsibility and actually reading who's tag on the lock. Here in sweden we don't have any LOTO requirement at all (except for public accessible spaces, example: A grocery store, or lobby, or whatever area that is not secured, where LOTO is required). Instead all responsibility falls on the employee which turns on a breaker switch without carefully checking the danger zone. In sweden, isolation switches that are used to isolate a circuit during maintenace even has a warning sign that it may not be turned off for any other purpose than safety - because then people knows that if the switch is turned off, it should not be turned on again by anyone else than the one who turned it off. (so if you turn off a machine during a vacation, you should NOT use the maintenace switch, but rather use a non-maintenace isolation switch for that)
@cup_and_cone7 жыл бұрын
Sebastian Nielsen - Tagging is still generally required by most companies so locks still in use can be ID'd to whomever is still missing. Using a group lockout box is the main reason lock security is important, because there's only one lock on the main panel...it only takes one genius to jam his key in the main panel lock, while there is potentially multiple locks still on the group lockout box.
@Mister67 жыл бұрын
This sounds plausible. I had to do some work at at a railway maintenance facility that required a broad shutdown of equipment (particularly the 1500vDC). The LOTO procedure before we could start was over 4 hours and involved hundreds of boards and circuits. With cheap locks (e.g. 4 pin) it would almost certainly be possible for a key to release more than one lock and allow an accident. This was a joint Private/Government environment where OHS considerations were extremely strict (even working 1 meter up required an enclosed platform, no ladders were allowed) so I could definitely see them having a "lock safety guide"
@TheObimara7 жыл бұрын
Responsibility is good; idiot-proofing is better.
@TheObimara7 жыл бұрын
Exactly: You can open the wrong lock by mistake in normal operations so the core has to be great; you're very unlikely to physically defeat the lock by mistake, so the lock construction is not important .
@yousefelmani5 жыл бұрын
"Hey, take a break from the locks for a minute and come watch a movie with me" "Sounds good, I'll meet you there!" *takes a chain of ten locks to the couch*
@qhodave2 жыл бұрын
I love picking while watching a movie too. Best moment to use time more wisely
@dsproductions19 Жыл бұрын
1:36 Perfectly shows the difference between LPL and a normal pro locksmith. Professionals learn lockpicking for work, and usually only what they need to know for most jobs. People like LPL (experts and enthusiasts) do this for fun, at literally any time or place, and they end up with way more practice and odd knowledge as a result. Similar logic also applies to most industries.
@gamefirst51313 жыл бұрын
In e movie theater: People kissing each other for the first time LPL: Click out of two 😂😂
@ohaaram84356 жыл бұрын
I've smashed a ton of these locks as a PLC programmer. Millwrights or electricians do some work, forget the lock and then go home leaving a machine in a locked state for the next shift. We call the name on the back, get verbal confirmation the machine is safe to run and smash it off with a hammer. Saves lots of time removing locks but I suppose everyone involved needs to respect the kind of honor system there.
@spinnanz5 жыл бұрын
Easiest way to remember the remove the lock is to lock your car keys to the lock when you lockout a machine.
@philb81865 жыл бұрын
As a union electrician myself, I appreciate you stating that you call the number BEFORE smashing the lock. It’s EXTREMELY important no one ever removes one of these without direct contact and approval from the name or company written on the lock
@Harmageddon5 жыл бұрын
Should always get a written agreement over a verbal one
@ryancleaver66135 жыл бұрын
I forget my lock all the time... millwright here.
@keyworksales62415 жыл бұрын
Good way to get yours keys stolen
@ericapelz2602 жыл бұрын
I use these, and there is a good reason. The locks are tricky to pick for most people so removal is always destructive if the key isn't available. This is a safety feature. It's about the LO/TO policy of the company using the lock. The plastic lock combines a cheap to buy and replace (when it's inevitably cut) lock with maximum key combinations to minimize the chance of a duplicate in an organization.
@aussiebushmechanic2534 Жыл бұрын
I have been waiting a few weeks now for my Covert Companion to arrive (I live is Australia so everything takes time from the US), finally it arrives and I’m straight into putting it together (thanks for the video on that LPL!) and then madly looking for locks to pick open - the only two I could find around home are a tiny Lockwood travel luggage lock, picked on my second try, and my Masterlock isolation lock the same as this video. I was getting frustrated and disheartened that I can’t even open this little plastic lock - feel better now lol, maybe off to the shops to buy some other practice locks somewhere in the mid range 😂😂
@csongorvassanyi68014 жыл бұрын
Lockpickinglawyer at cinema popcorn stand: Hello could i get a padlock to pick during the movie?
@musiscarrinu34704 жыл бұрын
He comes back 5 minutes later “Hello yes this unshielded keyway allowed me to simply insert a sheet of metal and turn the keyway, buy something that isn’t mater lock quality.”
@mjenk202367 жыл бұрын
It is a desirable feature for these locks to be relatively easy to break. Many times locks needed to be broken when an employee left the facility without removing their lock. A supervisor was allowed to break the lock after locating the employee and verifying that they were no longer at the site. Usually these locks were used with hasps that were even easier to break than the locks. As far as I know, these locks are not useful beyond compliance with OSHA regs.
@GordieGii7 жыл бұрын
I was going to say that. Also the employee could drop the key somewhere irretrievable. Also the locks should be inexpensive and unlikely to have common keys and resist accidental raking despite a maint-dept having large numbers of them.
@AToolWithTools6 жыл бұрын
mjenk20236 I've had to use one of these and I believe that is the case. I dropped it about five feet once and the shell came clean apart; it's not fusion-welded or anything, literally two halves of a clamshell with a couple pins for aligning them with each other and some light adhesive to keep them together. I taped it back together. As for the extra security, it's to help ensure your key is actually being used on YOUR lock. But on the backside a label is provided where you're supposed to write your name; it also comes in several colors, mine was yellow, here we have a red, and I've seen blue before. An ounce of caution will go much further than any lock core in making sure you remove the correct lock -- does it have your name, is it the color you were assigned, are you sure you're at the panel you are responsible for? It would also be feasible to provide multiple locks to each person if they will be working on more than one zone. Use different colors or something, or stamp serials on the shackle and each matching key. Finally, a fatal mistake I have seen is for multiple personnel working in one zone to daisy-chain their locks off each other. There are group lockouts with multiple holes for each lock to be installed and ensures every lock must be removed before it can be energized, use them!! A six-hole group pad can be made to fit many more, just daisy-chain the group pads off each other until the necessary amount of holes is had. If even one lock exists anywhere on the chain, ultimately the one on the equipment will not open.
@Mikej15926 жыл бұрын
wow, where I work if you leave your lock on a tool/machine you will be called back in to unlock it. You could lose your cert and or get written up if they have to pull out the bolt cutters and have a huge ordeal.
@rich10514146 жыл бұрын
All you need is a claw hammer to break off a plastic masterlock.
@Mark_876 жыл бұрын
Nailed it. Bigger yellow ones are usually on the hasps. They aren't meant to not be broken into, just so you need to fill out a form and check the machine is clear. They're for saving fingers not property
@jasonaimereimer60492 жыл бұрын
Normal people: Concentrate on the movie or sitting on their phone. LPL: Opens Master Locks for practice
@tommyd8188 Жыл бұрын
Im an electrician and we use the plastic loto’s alot. Its good to know they’re difficult to pick. Usually the device it’s attached to is all plastic (breaker lockout) and can be broken off easily. What keeps most trades from screwing with them is you can get some hefty jail time for tampering with one.