47cc China Engine with All Upgrades Installed FIRST START UP!

Рет қаралды 68,347

5 жыл бұрын

BIG BORE Install: • BIG BORE Kit Installed...
ROCKET KEY INSTALL: • ROCKET KEY Installed O...
TURBO CRANK: • TURBO CRANK? Installed...
PERFORMANCE CARB AND REED: • Performance Carb And C...
Thanks for stopping by my channel!
Patron: / dylondesbiens
Business inquiries: dylon.desbiens@yahoo.com

Пікірлер: 156

@jaguars004 5 жыл бұрын

Give this video a LIKE for me !! Check out all the install episodes in the description :)

@idlycaustic 5 жыл бұрын

What exhaust pipe did you use?

@jaguars004 5 жыл бұрын

Its the pro jet pipe

@rosskennedy7039 5 жыл бұрын

Mine comeing on nice. Just need the front mud gard on but quite fancy that jet pipe. And sounds nice i would put it in a mini crosser as the carb will be hitting the rear swing arm on the mini quad.

@rosskennedy7039 5 жыл бұрын

I would show u a pic of mine but carnt put it on hear

@jaguars004 5 жыл бұрын

Ross Kennedy oh okay that’s good to know thanks

@masboyrc 4 жыл бұрын

5:51 for start the engine, pay with thumbsup 😁👍

@skullcam 5 жыл бұрын

just so ya know ....vibration on that engine is not to bad... maybe just a tad over normal.. ..anyway get that beast in a fram and rip it

@skullcam 5 жыл бұрын

good vid bro... i finally got some pocket bike race footage uploaded

@EricErnst 5 жыл бұрын

Sounds great. I like the stand. It's functional.

@jaguars004 5 жыл бұрын

Eric Ernst thanks man can’t wait to get it In something

@EricErnst 5 жыл бұрын

@@jaguars004 Me too! Keep up the good work, man.

@dandufour116 5 жыл бұрын

Not sure how much power that pipe actually adds. manufacture probably did it just for looks it’s an odd shape. Get a used ktm sx50 pipe and weld on a new flange that’ll be an actual 2 stroke pipe

@skullcam 5 жыл бұрын

i have the same pipe bro and it makes a good difference ....never tried a ktm 50 pipe.. interesting

@dandufour116 5 жыл бұрын

skullcam i’m sure it gives you a little bit more power but it doesn’t look like a proper pipe. If you look at 2 stroke dirt bikes it’s just one big smooth expansion chamber and this one looks really curvy so i’m not sure if it’s getting the best flow

@jaguars004 5 жыл бұрын

Yea I would agree that it looks a little strange compared to any normal 2 stroke pipe, your probably right... I’ll have to get a stock pipe then a proper 2 stroke and compare all of them :)

@dandufour116 5 жыл бұрын

Dylon Desbiens That would be a cool video like do a 60 foot time and a 120 or 200 foot time with this pipe and a different pipe like off a motocross bike and compare them

@BonFire201 5 жыл бұрын

don't go with ktm there really bad for reliability. if your gonna get a small 50cc pipe go for like polini or malossi

@gudcudahudydewgarage8328 5 жыл бұрын

Hell of a weed eater you got there

@mikasiereveld3124 5 жыл бұрын

did you balance the crank? last video i saw you cut the crank but did you balance it?

@arrepuess 5 жыл бұрын

Excellent video, however i would recommend a better carburetor to really help it come alive. A walbro hda-43 from DDM racing. You may need to tap a pulse line as its external. But they aerate the fuel much better, and faster as it has multiple jets. Has a high and low. I think ill be building one of these to put on a goped or bladez scooter soon. I know there are better cyl kits available nowadays. Thanks for the great vids!

@karriebhurgari3933 5 жыл бұрын

Crap I thought you stopped uploading!! Cuz I didn't see you in my feed cool engine tho! Sounds Soo good!!!!! Great job! Wonder how much power it makes? I'm saying 6hp without porting

@MY3DCO 5 жыл бұрын

Delorto or bust! That sounds sick!!!

@skullcam 5 жыл бұрын

only trouble i have with that pipe is i cant fit the engine top mount

@kalebs8017 4 жыл бұрын

Hey man love your videos. I’m trying to upgrade a scooter when I had when I was kit. It’s a Chinese scooter with I believe a 43cc 2 stroke engine. Do you know what larger motor would bolt up to this style scooter? Should I just go with a 49cc and do a big bore kit?

@ianvaldivia1993 2 жыл бұрын

We're did you get the exhaust? I have a pocket quad and the stock exhaust isn't cutting it

@nickhersheys2706 5 жыл бұрын

Is it possible to change the sprocket to fit a 415 chain for building a motorized bicycle?

@paulbags123 5 жыл бұрын

Use 2 plug washers... job done

@thebug4046 5 жыл бұрын

sounds good man keep up the good work and if you wan you can go with 32:1 mix it will perform better once the engine is done it's brake in just make sure to keep the high octane gas

@jaguars004 5 жыл бұрын

thebug 404 okay thanks good to know

@johnyongboi506 2 жыл бұрын

I love upgrade motor. i just don't know how to rebuild them. ride goped I been ride for a long time. nice one you got there

@pawe8810 3 жыл бұрын

Please show how you mount the electric starter to this engine

@motorizedbikes9933 5 жыл бұрын

only problem i can see is going to be the top motor mount, the exhaust will be in the way but u will figure somethng out do not run any bike without it frame will twist and flex

@trevor02150 28 күн бұрын

Hey bro -- what is that big expansion chamber exhaust off, that big bore motor sounds awesome 👍👍👍

@demianlindenmann2915 5 жыл бұрын

Is that exhaust good?

@pinkporcelain 5 жыл бұрын

I drove two hours just to get a pocket bike thanks for the motivation # no regrets

@jaguars004 5 жыл бұрын

barbie ang heck yea!! Nice, put a vid up of it :)

@yajmuhs7853 3 жыл бұрын

Lol im doing the same thing. Do you still ride it?

@Gettingbuiltlife 6 ай бұрын

Why mine bob out and seem like not enough gas when full throttle. Have one of these on my blade z sco

@sayerofmotorcyce461 5 жыл бұрын

Wow amazing

@ricercivic254 Жыл бұрын

We're can I purchase a performance exhaust like the one u have on your 47cc 2 stroke engine link please

@loll1974 2 жыл бұрын

Great video.Were did you get the air filter from and part number cheers

@CDOGG500 Жыл бұрын

Hey pal where did you get that pipe?

@terrya450 5 жыл бұрын

good job on getting it running you inadvertently built yourself a long stroke the 47cc cagllari engine is supposed to have the crank with a 44 mm connecting rod you have the crank out of a 49cc piston port engine that's why the Piston hits I bet it has mad torque throw it into a roller and try it out :)

@jaguars004 5 жыл бұрын

Terry Ambrogio Thanks man good to see you back! Can’t wait to find something for it

@nedflanders5380 Жыл бұрын

Where did you get the exhaust?

@brucegissing9489 3 жыл бұрын

DO YOU HAVE ENY NEW VIDIOS IN 2000 I CANT FIND DID YOU GET A ELECTRIC START FOR IT

@Sonyman2000 2 ай бұрын

Is it possible to get this type of engine on a chinese gas scooter?

@deimosphob 5 жыл бұрын

Best upgrade for that engine would be a balanced crank because it seems to be vibrating a bit more than normal.

@Potato37184 3 ай бұрын

The full circle crank is for filling up the room in the engine, there will be more pressure to press the gas and air mixture im the cylinder

@deimosphob 3 ай бұрын

@@Potato37184 Yes, a crank that fills more volume will create more pressure, but a crank that is not balanced properly will rob any of the gains you would get from that increase in air volume. Its better to measure your balance factor and drill out the crank than rob power through imbalance and also rob your engine of top end rpm where your power probably is. You can also slug your crank instead so you don't have to have holes. Ie you add weight or you use a lighter weight material than the crank. NTM engine imbalance in general can destroy your engine very quickly.

@JasonBohl 4 жыл бұрын

Anyone know what's a good performance pipe for a standard Chinese 49cc 2 stroke?

@600bubba 5 жыл бұрын

You need to remove the gaskets you made and order another 1 or 2 copper head gaskets putting more gaskets under the base of the gingerbread with port timeing

@stonewallsaucedo5613 2 жыл бұрын

Dang bud you must have heard every line there is that cold ryme with your last name.

@jdmfanatic0262 8 ай бұрын

What Kind Of Exhaust Is That ?

@veronica6671 2 жыл бұрын

Hola en cuantos cv quedaria con ese kit y cuantas rpm

@KingKrashArah-Cee 3 жыл бұрын

I got the right size pocket bike frame with the rims and tires.bif you want it I will donate it to your channel. How do I do this?

@ivannovoselac3518 2 жыл бұрын

How much dellorto is mm wide venturi?

@martinb1363 3 жыл бұрын

Can I ask where you got the exhaust from as I'm looking for the same design..thanks.

@jaguars004 3 жыл бұрын

Ebay its "Jet snake pro pipe" they call it

@JasonBohl 4 жыл бұрын

Why didn't your upgrade the coil and magneto that comes with a CDI box? They do make them for this engine. The box is a lot smaller than the typical ones but just saying.

@hocu420 5 жыл бұрын

You got the name of the expansion chamber on that engine/please? I have one already but always looking for more!

@jeeg7204 5 жыл бұрын

Little pricy but... www.pocketbikeparts.com/pocket-bike-exhaust-cag-pro-jet-pipe.html

@hocu420 5 жыл бұрын

Absolute legend, want to buy at least another so I have one for my PBU big bore and can take another to work, split and make multiples and different manifolds for different engines! Might see if I can utilise the expansion chamber with modified muffler and manifold for a moped!?! But thanks though! 👍

@jeeg7204 5 жыл бұрын

Jasper Bialan be careful looking into the numbers for doing that it’s a whole other complicated world with many books and debates on

@joshlorusso3751 Жыл бұрын

what exhaust is that?

@ronniewhite9077 4 жыл бұрын

whats have more powe the 49cc that you have or a 66cc from a Motorized Bicycle ?

@Unknown-kd3ri 4 жыл бұрын

Okay, my brother has a blata 2.5 pocket bike, it's an air-cooled European engine, similar to these Chinese remakes. And his bike straight smoked my friends 66/80cc Moto bike kit. It was no competition, in acceleration or top speed. These engines haul ass when properly tuned in

@garyleeswope9599 3 жыл бұрын

Break it in with a heavier weight oil mix and it will be fine

@erikhendersen1877 Жыл бұрын

How do I get that exhaust pipe

@011CJ 2 жыл бұрын

I run a 4 stroke on I'll of my pallette cruisers jk sounds good

@FLYDANIEL__ 5 жыл бұрын

Hello Dylon and people. I really need your help. I installed 4 days ago a big bore kit and a full circle crank. I installed it perfectly, no noticeable problem but, when I tried to start it it didn't start. I tried to start it for 2h and it finally started. After 3 avarage speed pulls my throttle cable got out my carburetor. I went home and fixed it. After that I tried to start the bike and I couldn't. Since that I opened up everything to see if I did something wrong but no I didn't, everything seems pretty good mounted, my sparkplug works so as my ignition Coil. My question is. How can I start the engine, what problem could it have?? I will appreciate your help. Thanks a lot (:

@Unknown-kd3ri 4 жыл бұрын

Your carburator maybe. Compression

@masonfritzke5137 5 жыл бұрын

How can you make thoes engines quieter. The stalk exhaust is a bit too loud for where i live

@jaguars004 5 жыл бұрын

Mason Fritzke I’ve heard taking the stock muffler packing out and stuffing it with steal wool tight helps and doesn’t decrease power , I’ve never tried it tho

@jeeg7204 5 жыл бұрын

You can buy different mufflers and weld them to fit

@jaguars004 5 жыл бұрын

Of course be careful tho, if you get it very very quiet your most likely hurting the me engine... these are sort of built to be obnoxiously loud

@jeeg7204 5 жыл бұрын

Dylon Desbiens you will also loose a large amount of performance unless you put like all oversized stuff and do some over the top stuff.

@oldiirtyis3002 4 жыл бұрын

Where did you get the pipe? I wanna buy this motor but don’t know where to get the pipe?

@jaguars004 4 жыл бұрын

They call it a Cag pro Jet Pipe. I got mine on ebay

@motorizedbikes9933 5 жыл бұрын

no matter what anyone says there is no harm done in this video at all and is running good not lean becuase theres smoke so looks good dont worry bout the haters

@jeeg7204 5 жыл бұрын

Motorized Bikes why comment that

@jeeg7204 5 жыл бұрын

moosa8888 العاب وشروحات you have to look at the spark plug to tell how it’s running. You can’t just see how much smoke it’s spitting in a video

@jaguars004 5 жыл бұрын

Thanks! 2 strokes put out a lot of smoke tho guys right? Seems normal to me, I’ll do a walk through vid of the spark plug though forsure

@jeeg7204 5 жыл бұрын

Dylon Desbiens not too much smoke, usually a little more during the initial break in because you need to run a little more oil with it. But it also depends on humidity, temp, etc.. but yeah the only real way to tell is to test the spark plug

@jeeg7204 5 жыл бұрын

Dylon Desbiens kzfaq.info/get/bejne/kN5kZ9iDq7G2dGw.html if your not entirely sure this is a ok video for reference on what to do for tests. You don’t have to do the top speed runs and stuff you can simulate it with a small load on the engine for similar times. There are also charts that you can find on google images for 2 stroke spark plug tuning colors. Some easy ones to spot are if it’s super wet and black to much oil or dry and white not enough oil and too lean. You want it to be a nice tanish with not too much oil on the plug to where the entire thing is horribly soaked.

@zacklamers1734 5 жыл бұрын

sounds like it has a compression problem, not gonna be good when ur riding the bike, it wont have power

@jefferycervantes3008 4 жыл бұрын

How much HP and CC's does this engine have after all the upgrades?

@Potato37184 10 ай бұрын

53cc and 4-6 hp

@nakedluck11 6 ай бұрын

Reed induced bbc is 49cc and hp depends on the porting he did to the head. A bbk on a piston port will get you to 53cc.

@Ben-rm9jx 5 жыл бұрын

one of the first out of 102

@niccoloantidormi7948 3 жыл бұрын

What Exhaust is that I can’t find one like that anywhere

@jaguars004 3 жыл бұрын

www.pitpowersports.com/exhaust-pro-jet-pipe.html

@niccoloantidormi7948 3 жыл бұрын

Ok thank you so much

@therealilxaiden 3 жыл бұрын

I just got mine I’m the mail and it won’t start it has fuel but when I try to start it it acts like it’s just about to fire up but it doesn’t

@reychavez-vu5ww 11 ай бұрын

Gap and replace spark plugs with good American plugs

@600bubba 5 жыл бұрын

Base of the cylinder

@hoesssaaayyymyname5734 4 жыл бұрын

Are these mixied gas with pil or just gas

@jaguars004 4 жыл бұрын

Mix

@HiRollersOfficial 5 жыл бұрын

What purpose does it serve being mounted to a pallet on the back of a quad...

@jaguars004 5 жыл бұрын

It serves an engine run stand to be-able to easily tune the engine and try different 'performance' mods so you don't have to deal with tight spaces when its on a bike.

@kevinbosworth3 3 жыл бұрын

get on with it

@skullcam 5 жыл бұрын

hey wats your community part of the channel...

@jaguars004 5 жыл бұрын

Thanks for the comments skull I’ll check out your channel again, the community part is on my channel in one of those tabs

@octaneaddiction1405 5 жыл бұрын

are those palets of lighter fluid in your garage

@jaguars004 5 жыл бұрын

No GTX Race oil

@octaneaddiction1405 5 жыл бұрын

that makes more sense

@subtot-rexg4m1ng86 5 жыл бұрын

Where did u get that exhaust to

@jaguars004 5 жыл бұрын

Ebay type in 47cc jet pipe

@kevinwestner3193 5 жыл бұрын

Man that exhaust is leaking like shit at the silencer! U should take a look into that, It runs poorer if the exhaust leaks

@jaguars004 5 жыл бұрын

true, its all one piece I think but I'll try to come up with something

@themagneticheartradioshow9372 5 жыл бұрын

How much did that exhaust cost?

@jeeg7204 5 жыл бұрын

The Magnetic Heart Radio Show www.pocketbikeparts.com/pocket-bike-exhaust-cag-pro-jet-pipe.html

@jordan.ecuadorchoez2699 5 жыл бұрын

Where u get that pipe ..?

@jaguars004 5 жыл бұрын

Ebay type in 47cc jet pipe

@jordan.ecuadorchoez2699 5 жыл бұрын

thxxx very much

@szypki_zygi 5 жыл бұрын

How much HP does it make?

@baileyturnerphillips2579 Жыл бұрын

About 3.5-5

@garyleeswope9599 3 жыл бұрын

You need more oil please for break in 20 to ,1 for now

@carlbarrett8289 3 жыл бұрын

Sounds like a lawn mower

@editingstudio1938 3 жыл бұрын

What is the rpm of this engine?

@baileyturnerphillips2579 Жыл бұрын

About 13,000rpm

@garyleeswope9599 3 жыл бұрын

Nice try to always use air filter

@rhys7671 5 жыл бұрын

SOME ONE HELP what’s the point in this engine being here ???????

@jaguars004 5 жыл бұрын

What do you need HELP with? It’s for tuning the engine easily

@rhys7671 5 жыл бұрын

Dylon Desbiens thanks I understand now I thought there was a reason you had it sat on the back of a four wheeler , thanks

@aviationfreak1174 5 жыл бұрын

Imagine using this for a chainsaw

@jeeg7204 5 жыл бұрын

Yeah it would not be very good. Some chainsaws are actually larger in cc’s and hp . Ex: stihl ms660. The top end for that is also used as a big bore for motorized bikes and puts out.

@aviationfreak1174 5 жыл бұрын

Jag S true. maybe for a weed trimmer

@jaguars004 5 жыл бұрын

Good thing is you can just look at my Pokémon Pocket Bike and see a real chainsaw engine on a bike, the thing does 50mph but it’s 90cc

@ROCKNROLLMODS 3 жыл бұрын

Why didn't you put it on something. No way to judge power from this video

@jeeg7204 5 жыл бұрын

Tf... that ground being connected to the quad makes 0 sense. And your Carb mount, it’s probably not air tight

@jaguars004 5 жыл бұрын

Whats wrong with grounding to the atv? and yes it's air tight. Works perfect

@jeeg7204 5 жыл бұрын

Because it needs to be grounded to the little engine with it being grounded to the quad it does nothing and isn’t practical

@jaguars004 5 жыл бұрын

Well thats new to me... In a car you would ground it to the frame not itself I've never heard of grounding an engine to it self.

@jeeg7204 5 жыл бұрын

Dylon Desbiens you can do it to frame that you actually mount it on. But it looks like you have that engine mounted to wood and not anything conductive connecting the engine or magneto to the quad to connect the engines ground to the quads frame.

@jeeg7204 5 жыл бұрын

Dylon Desbiens or that wire could be the kill switch wire so when you properly ground it (try the engine) it kills the spark...don’t quote me on this, it’s something I just read on a forum.