Follow up to this video -> kzfaq.info/get/bejne/iLGCrMSV1LjPinU.html The squeak (to a lesser extent) came back the next day. With the camera out of the way this time, I was able to see better and get more room. Now the squeak is 100% gone. With the slave piston out of the way, push the clutch fork (away from the internal pivot head) and pull it outward. You will get plenty of gap to get grease in-between and I put a good amount. You can move the clip out of the way to create a bit more room. Be very careful when getting the slave cylinder out of the way under hydraulic pressure, release the slave rod slowly. You do not want the piston cup inside the slave cylinder to pop out with the fluid. Do not push the clutch pedal when the slave cylinder is not pushing against the clutch fork. If you have a rattling on idle, sound like a bird chirping, this unintendedly got resolved in part 2 of this series (by refreshing the internals of the clutch slave clylinder) - kzfaq.info/get/bejne/ldp0hqSlyJO2ln0.html

Finally got tired of listening to the squeaking and did this quick fix. Worked like a charm ! Thank you for posting this !

The mouse at 35 seconds!

How could you miss that mouse 🐭

Thank you very much Very useful and I have successfully installed the rubber May you and your family always be blessed with health, safety and happiness always amin

This is great to know! My Fit/Jazz does the same thing. Of course, I'm not going to be doing this fix, because these cars are a pain in the ass to work on. When I get my new master cylinder with the clutch delay valve delete, I'll have my mechanic try and fix that squeaking. Thanks for sharing! And make sure you compensate the shop apprentice accordingly, wouldn't want him to start chewing on any wiring.

🐁: I found the problem boss!

😂😂I thought the mice was the mechanic

Thank you big time did work for my toyota auris 2009🎉🎉

Nice and thorough. Thank you

I have the same passion to do my car by my self. I can do small and easy maintenance tasks. You are way more professional than our mechanics in the market I wonder how you are so much professional. Have you get some training or course. It's amazing to watch your videos.

THANKS FOR BEING SO DEATAILED!

I had this issue with my Toyota Hilux and the noise was coming from the slave cylinder itself. The squeaking noise resolved after i slide the rubber boot on that slave cylinder until the thin long shaft was visible and sprayed CRC on the shaft at intervals whilst my son pressed the clutch up and down. This lubricated the shaft in the cylinder and after 5 minutes of spraying the noise was gone..

Are you sure the squeak wasn't the mouse?

Terimakasih banyak Sangat bermanfaat dan saya telah sukses pasang karet nya Semoga anda dan keluarga selalu di anugerahi kesehatan keselamatan dan bahagia selalu aaaaaaaamiiiiiin

Mickey mouse 😂