4B11 Mitsubishi Evo/Ralliart Engine Rebuild - Stroker Kit
Рет қаралды 24,544
6 жыл бұрынRemember that 4B11 Evo/Ralliart Engine we showed you a little while back with the broken valve and subsequent piston damage?
The owner has decided to take the opportunity to do some impressive upgrades including a stroker kit.
Let's take a look.....
FOR MORE INFO ON THIS CAR VISIT:
tinyurl.com/MRT-powerkit
tinyurl.com/MRT-brake-kits
tinyurl.com/MRT-suspension-kits
tinyurl.com/MRT-engine-data
@TraceyAllen 6 жыл бұрын
Love the play dough. Always nice to know valve u o piston clearance.
@MRTPerformanceAustralia 6 жыл бұрын
:)
@scoobystichris790 6 жыл бұрын
How can anyone dislike you video, many thanks Bret 👍
@MRTPerformanceAustralia 6 жыл бұрын
thanks can you give us feedback here? :) |www.google.com.au/?gfe_rd=cr&ei=qvzuWJWwL4Xr8wfl65KACQ#q=mrt+performance&lrd=0x6b12a4fda1446c67:0xd977a8763eea40f2,1,
@Laughup89 6 жыл бұрын
For everyone asking about the play-doh its really useful for getting into tiny places on cars for cleaning so i assume thats their purpose. And actually thats what play-doh was initially used for was cleaning :)
@MRTPerformanceAustralia 6 жыл бұрын
also to check piston to valve clearance!
@ADRIANW78 6 жыл бұрын
Alot more cylinder liner bracing than the Ford eco-boost open deck blocks. What would you say would be the limits of the 4b11 block before you need block mods like cylinder liners Brett?
@stephen9944 6 жыл бұрын
Your knowledge and transparency is inspiring, i wish i could get my 14 evo x mr to your shop but Im in Toronto Canada haha. What should I look for in a shop when looking to get tailored performance? Cheers and thanks for educating me on this awesome car!
@MRTPerformanceAustralia 6 жыл бұрын
thanks for your feedback :) my advice is use our vidoes as a guide then ask a lot of questions, locally :)
@stephen9944 5 жыл бұрын
Oh I can apply that fully thanks to your vids. Ice learned a lot and really dig the advice on intakes needing that snorkel and kept away from radiant heat. Cheers!
@Not2daybro 2 жыл бұрын
is it possible to drop in new rods and pistons without pulling the motor?
@Jscboxer 6 жыл бұрын
Very informative and interesting video, as always. How long does it appear the engine ran after the failure? A matter of seconds?
@MRTPerformanceAustralia 6 жыл бұрын
yes, only seconds
@Mustardmartin 6 жыл бұрын
Hey Brett what is the playdoh used for I noticed it on the shelf behind you ?
@schrabbels 6 жыл бұрын
Its for checking clearance between piston and valve
@DrewwwLz 6 ай бұрын
Stock sleeves limit?
@gamingoverpowered4127 2 жыл бұрын
How much would a b411/b411T engine rebuild cost. And is it worth it.
@fred_jay2119 3 жыл бұрын
Will the kit fit a 4b11 na
@jazperruedas8114 3 жыл бұрын
I wish they will answer
@stevethedonful 5 жыл бұрын
We’re those pistons forged or cast?
@MRTPerformanceAustralia 5 жыл бұрын
new pistons are fully forged, original pistons are OEM
@ianjohnson4541 5 жыл бұрын
OEM pistons good for 550 bhp. Better to spend the money on high specification conrods/head studs below this level.
@silvia12319 3 жыл бұрын
why does he say avo or evo?
@jesusangeles152 4 жыл бұрын
All that and didnt sleeve the block 🤦🏽♂️
@blindabinda1234 6 жыл бұрын
In the USA the Ralliart is a cheap low hp car. Is this 4b11 going to be turbo?
@Nathan-rn8yg 6 жыл бұрын
the Ralliarts we got in Australia were turbo cars, but lower power compared to the evo X
@MRTPerformanceAustralia 6 жыл бұрын
Chances are the ralliArt turbo in the USA is the same as we have here with the 4B11 engine
BalcevMMA_BOXING
Рет қаралды 12 МЛН
Теория ДВС
Рет қаралды 199 М.
BTD Garage
Рет қаралды 11 М.
jamoloniy
Рет қаралды 1,1 МЛН