Installing the head on the talon block. Land of Plenty Ballpoint
Пікірлер: 42
@martinhinojosa393 жыл бұрын
Nice vidoe bro!
@bmwe-op4jxАй бұрын
How much torque ,psi ,and power can those headstuds can handle ?
@VegaTunedАй бұрын
I can only speak from my experience. I've ran these on my 4g63 with a fp 3052 @ 28psi for 13+ years. 460hp 480tq. Hope this helps. I would recommend l19 or better for applications above 28psi.
@zachcraig47772 жыл бұрын
Love that Mitsubishi service department sign!! Hang it up!! Lol
@VegaTuned2 жыл бұрын
Haha, I always say I will. And have yet to
@zachcraig47772 жыл бұрын
@@VegaTuned lol oh I know how that goes. My go to phrase is, "I'll do it next weekend" 😂😂
@workingmansrestorations7071 Жыл бұрын
I have a 4g63t I bought... previous owner said tensioner broke on start up... I pulled plugs and scope said valves hit. I am thinking I might try to machine head and reinstall... what do you think if everything else checks out. I have 16 cars and it gets tough to rebuild and make everyone perfect
@VegaTuned Жыл бұрын
That's unfortunate. But as long as you remove the head and have it all checked out, it should be fine. I have seen a good amount of motors that jump and end up being just a bent valve . I would just stress using OEM timing components. I've always had great luck with them. Keep me posted.
@workingmansrestorations7071 Жыл бұрын
@Vega Tuned I will use stock timing components. Doing my homework now and was going to give up on car, but I am seeing so many nice ones, it has helped me out to get my feelings back for her
@VegaTuned Жыл бұрын
@@workingmansrestorations7071 heck yea. Keep them on the road. It's for sure worth saving. You got this
@khairulshahrizan7507 ай бұрын
120nm toq
@levaughnpowell86603 жыл бұрын
What is the torque specs for oem head bolts?
@VegaTuned3 жыл бұрын
Not for sure. But I did find this. www.dsmtuners.com/threads/head-bolt-torque-sequence.453462/
@dsmjaime3 жыл бұрын
Hey man, please reply!!! I’m about to throw my head onto my built block but I’m missing those ring passages. Here you pointed and touched the exact piece I’m missing @2:09. Do you happen to know where I can get them?
@VegaTuned3 жыл бұрын
Do not install the head without them! Yes you can get them from mitsubishi parts department. Or extremepsi.com
@VegaTuned3 жыл бұрын
I'm almost 100% it's these. But might want to call and double check. www.extremepsi.com/store/OEM-Dowel-Bushing-Cylinder-Block-to-Head-Mitsubishi-Eclipse-90-99.html
@dsmjaime3 жыл бұрын
@@VegaTuned holy moly, this is the third time I watch your video. I just get a lot of anxiety because I’ve spent a lot of money and I would hate for it to blow up on me or have low compression :( thanks for the fast reply man.
@VegaTuned3 жыл бұрын
@@dsmjaime I totally understand where you are coming from. Just take your time. You can do it! It's all about the prep with these cars. Use the quality oem part the majority of the time. And follow the instructions especially torque specs and sequence. If you do that you have the best shot at it coming out perfect.
@dsmjaime3 жыл бұрын
@@VegaTuned will do, I will let you know what the outcome is!!
@CaptTwo63 жыл бұрын
Good work man 👌 I just moved to the WR area and have a Evo 3 I brought from Japan with a spare engine. I want to build the spare 4G so I was wondering where you sent your head? Thanks!
@VegaTuned3 жыл бұрын
I appreciate it. I had the head gone over by a shop about 1hr away from me. Email dam0nk@yahoo.com and i can get you their info. They are extremely through . I really love the Evo 3. One day I hope to see one I'm future. What are your plans for the head?
@CaptTwo63 жыл бұрын
@@VegaTuned I’m actually looking to do a full build on it then swap it with the engine I have now in the Evo. I’ll be needing some tuning so I was going to actually hit you up. Even better that I see you have 4G63 knowledge haha. I just want the head cleaned and spec’d
@VegaTuned3 жыл бұрын
@@CaptTwo6 ok awesome. Its always nice to build a motor on the side. Any questions you have feel free to ask. And If I don't know the answer for sure I can find it.
@CaptTwo63 жыл бұрын
@@VegaTuned are you on IG or is FB best way?
@VegaTuned3 жыл бұрын
@@CaptTwo6 IG vega.tuned Facebook Vega Tuned Either works
@muhammadzharif9143 жыл бұрын
Stock head gasket 4g63t use carbon graphite or steel??
@VegaTuned3 жыл бұрын
Oem was graphite
@muhammadzharif9143 жыл бұрын
@@VegaTuned what torque for oem head stud ?
@VegaTuned3 жыл бұрын
I'm not sure the torque for oem head bolts. I've always swapped out oem bolts for arp studs.