4T65E Disassembly

Рет қаралды 10,806

Жыл бұрын

2007 Buick Lacrosse
PATREON: / curmudgeontransmission
Supplier Links:
Superior: superiortransmission.com/
Transtar: www.transtar1.com/
WIT: www.wittrans.com/
Sonnax: www.sonnax.com/
Teckpak/Fitzall: www.teckpak-fitzall.com/
Transgo: transgo.com/
Precision of New Hampton: gopnh.com/
Atec Transtool: www.toolsource.com/atec-trans...
ATSG: atsg.com/
ATRA: www.atra.com/
Fatsco: www.fatsco.net/online-store
Jaggi"s: www.jaggiimport.com/home.html
Slauson's: www.slauson-transmissionparts...
Standard Transmission & Gear: standardtransmission.com/
Wade's: www.wadetransmission.com/parts/
Bishop's: www.bishopengine.com/

Пікірлер: 48

@oregontreesgaming Жыл бұрын

I thought you did this one already as well. I watched the first one I thought. The tear down and rebuild. Again is good for me. Keep up the good work

@CurmudgeonTransmission Жыл бұрын

Thanks

@donaldtaylorjr9878 9 ай бұрын

My man! Sharing his knowledge! Thank you!

@CurmudgeonTransmission 9 ай бұрын

Thanks for watching.

@haimsiboni2067 Жыл бұрын

Great Master piece you are i love your work very professional 👏

@CurmudgeonTransmission Жыл бұрын

Thank You.

@lesterm23 Жыл бұрын

Very well tech teacher!!!

@CurmudgeonTransmission Жыл бұрын

Thanks

@olatigeorgegoncalvesescola2341 9 ай бұрын

Muito bom gosto muito do seu trabalho

@CurmudgeonTransmission 9 ай бұрын

Thanks for watching.

@HanifEFIMechanical Жыл бұрын

Good job

@CurmudgeonTransmission Жыл бұрын

Thanks

@user-bx9qy8pp3h Жыл бұрын

👍👍👍👍👍

@CurmudgeonTransmission Жыл бұрын

Thanks

@user-kw2pi6ss2g 8 ай бұрын

Great video I've watched it twice. Maybe you can answer a question that I can't find an answer to? I have 4T65E that slips/shudders when taking off from a stop when the car is in the overdrive shift select position. If I shift the gear selector to L, I can take off as hard as I want and it seems perfectly fine. No codes, any idea why?

@CurmudgeonTransmission 8 ай бұрын

Most likely the forward band is starting to break. Very common for it to break.

@ampecsu 7 ай бұрын

I just trying to figure out if the male end on the transmission that the driver side cv axle goes onto should be able to wiggle by hand? Mine does. Have some grinding noises when turning sometimes..trying to figure it out

@CurmudgeonTransmission 7 ай бұрын

It should some slight movement.

@mauricehaynes4904 Жыл бұрын

I’ve watched all of your videos regarding the 4t65e, very informative. I have a 2004 impala 3.4, could I swap the standard 4t65e for the 4t65ehd?

@CurmudgeonTransmission Жыл бұрын

Thanks. You can if it is the same ratio. The tag on the transmission is where that information is. You can use the planets in the unit you already have. You can use the differential parts if they are the same tooth counts. The ratio is determined by the tooth counts of the chain sprockets and the differential parts.

@mauricehaynes4904 Жыл бұрын

@@CurmudgeonTransmission Thank you very much, it’s sounds better to rebuild my unit with stronger parts. My engine is not modified in anyway, I just want it to be more reliable than stock.

@CurmudgeonTransmission Жыл бұрын

They are not cheap. I would check with Slauson's or Bishop's for them. Links are in the description of the later video's.

@mauricehaynes4904 Жыл бұрын

@@CurmudgeonTransmission thank you for the information. And thank you for your videos.

@CurmudgeonTransmission Жыл бұрын

@@mauricehaynes4904 Welcome, thanks for watching.

@tobylillie6540 5 ай бұрын

i have an 06 impala SS 5.3 with a stage 1 upgraded transmission, i know these transmissions stock are terrible on the 5.3 so i got the upgrade, after 45k miles i was driving down the interstate at about 70, switched to fast lane and gave it some gas, as soon as i gave it gas i heard a loud clunk and i lost all gears and started hearing a loud whine, people were telling me same kinda thing happend to them and it was the chain. any thoughts?

@CurmudgeonTransmission 5 ай бұрын

Could be. Also could be the pump or torque converter.

@Freseros86 Жыл бұрын

How to remove input shaft seal my tranny 4t65e hd is leaking

@emii4233 10 ай бұрын

What would cause the extension housing to crack on a 4t65e?

@CurmudgeonTransmission 10 ай бұрын

Bad axle, loose mounting bolts or bad differential.

@ChrisJ85 Жыл бұрын

I pulled a 4T65E out of a 5.3 Chevy Impala. Do you think it's possible for it to go in a 3.5? Same Gen, too

@CurmudgeonTransmission Жыл бұрын

Ratio's will be different. There is a tag on the side of the case by the passenger axle seal. That tag will have a number and 3 letters. That code lets you know what ratio it is.

@ChrisJ85 Жыл бұрын

@@CurmudgeonTransmission I appreciate you.

@Aleksander736 11 ай бұрын

The error is an incorrect transmission coefficient of 4, because of which there may be an error, I removed the automatic transmission many times, changed the gaskets, elastic band, frictions, and still the same error, maybe it's a hydroblock???

@CurmudgeonTransmission 11 ай бұрын

Probably stripped splines on the 4th gear shaft. Where it splines into the sprag.

@Aleksander736 11 ай бұрын

@@CurmudgeonTransmission Could you show me a picture??? I disassembled the automatic transmission box again, there are small bulliers in the hydroblock, there is free movement of discs in the gearbox unit 3, the video shows that you added one disc, I'm thinking of adding it to return home, the discs in the drum of the second gear burned out. And also 4 turned black. The shaft closer to the hydroblock is not damaged. But maybe I looked at the wrong thing.

@Aleksander736 11 ай бұрын

@@CurmudgeonTransmission During the trip, you can hear how the first and second and third work, as soon as it switches to the fourth, the fourth immediately turns off. The solenoids are new.

@CurmudgeonTransmission 11 ай бұрын

I do not have a picture of a stripped shaft. The extra plate I add has the lining removed from an old clutch. I would check the shift solenoids, since you burned both 2nd and 4th.

@Aleksander736 11 ай бұрын

@@CurmudgeonTransmission I connected 2, 3 and 4 drums together and applied air to 2 drums. in the middle, where there is friction, air passes through. I think the air is also coming out of the 3rd gear drum, I'll change the gaskets again. 4 the drum works well when air is supplied. I bought new solenoids, their operation can be heard when the voltage is applied.

@Freseros86 Жыл бұрын

How to remove input shaft seal my tranny 4t65e hd is leaking

@CurmudgeonTransmission Жыл бұрын

www.harborfreight.com/seal-puller-with-2-tips-63039.html?campaignid=425671834&adsetid=1166582863634427&product=63039&store=317&msclkid=b495edc24b761e091329894628718426