Check out the 4UATTRO SHOP for official merch! 4uattro-shop.myspreadshop.com / 4uattros4 Installing new control arms and hardware on my b5 S4. www.fcpeuro.com/products/audi... Make sure to Like and Subscribe Instagram: 4uattros4
Пікірлер: 186
@gravitygabri3l3 жыл бұрын
You just saved me $1200. Thank you for taking the time out of your day and making regular men into house mechanics 👍👍👍
@CIPGAS3 жыл бұрын
Happy to help man!!
@asierallika17733 жыл бұрын
It´s crazy to see how advanced the AUDIs suspension were back then. Amazing tutorial, thanks for do it step by step =)
@CIPGAS3 жыл бұрын
Yeah they went full out with double wishbone back in the 90’s it’s crazy!
@ericgorder12 жыл бұрын
I like the Audi engineering of the A4's. I have a '97 Audi A4 (B5) and they were ahead of their time when engineered it, the same technology is still used today. Thanks for the video!
@mediocreman2 Жыл бұрын
Man, you rock. Thanks for being so articulate and clear!
@Itesmassive2 жыл бұрын
Hoooo, Braddah I love the the videos I myself have a B5S4 these videos have provided me with tons of insight on my own car I really appreciate the time and effort put into these very clear step by step installation videos!
@zmeyrs62834 жыл бұрын
This is awesome, I worked on b5s for a while now, but learned new tricks from this video. Thank you
@CIPGAS4 жыл бұрын
Glad it helped!
@pelayogalan48093 жыл бұрын
Thanks for taking your time and showing us how to do this job.Its gonna be super helpful.Have a good day
@CIPGAS3 жыл бұрын
Thank you!
@Scouter983 жыл бұрын
Pretty good. Some things that are worth considering: Clean the rust off of the tie rod itself, make sure it moves (all the way, not just a bit) and lube it up. If you dont do it the guy doing the alignment isnt going to be too happy. (and will charge you for additional work) Always loosen and tighten by the nut, not the bolt. A little concerning when the car lifted off the jack stand at the end there. There should always be at least some pressure on the stand, otherwise you are risking the car shifting and crushing you. If you are going to do this to a a car that has seen winter, then expect twice the work you see in this video. That pinch bolt alone can take 30mins to remove. Balljoints seized in place. Bolts you have clean and spray with dubyadee and they still break or strip. As for parts, Lemforder and TRW are OEM suppliers, but lemmy seems to hold up better. Meyle HD is decent. Restoration of original parts is also an option, and its much cheaper. Ball joints can be reconditioned, this is done at a specialist shop(they fill it with special polymer). Bushings can be replaced.
@ghostboyfezb54193 жыл бұрын
Love how u kept ur cool while working on those. I worked on mine too and went thru alot of cursing, the shit was never easy for me 😂
@CIPGAS3 жыл бұрын
I know what you mean. Suspension bolts are always a pain.
@janinstuning54954 жыл бұрын
About time I change mines again. City streets are hell. Your a good mechanic
@CIPGAS4 жыл бұрын
Thanks! and yeah rough roads just destroy them.
@gamingvenom33792 ай бұрын
dead ass i wasnt going to touch the upper arms until lthis vid i thought the whole strut had to come out to do them so big thanks to you man, will be doing them next weekend
@ericgorder1 Жыл бұрын
Thanks very much, this is very helpful. My 1997 Audi A4 (B5) Quattro needs a suspension refresh. It has 280,000 miles on it. The potholes in Minnesota wasn't kind to it!
@malcolmgladney95373 жыл бұрын
Im picking up a b5 for a steal because it needed control arms you just saved me 1200 bucks thank you so much
@CIPGAS3 жыл бұрын
Awesome!!! Best of luck with it.
@scott1793 Жыл бұрын
Awesome video and I appreciate the detail! Great tip about flipping the direction of the long bolt for the lower trailing control arms
@CIPGAS Жыл бұрын
Thanks! Glad it was helpful!
@MrGilly2 жыл бұрын
Thank you so much for doing this at home with a few jack stands, so I can see how I can do it as well!
@CIPGAS2 жыл бұрын
Happy to help!
@philsloyer12823 жыл бұрын
Great Job young man. The video and audio was perfect. Very helpful.
@CIPGAS3 жыл бұрын
Glad you liked it!
@tactical886173 жыл бұрын
Dang i have a 2006 A4 S-Line and told i need left and right upper and lower control arms and struts, thanks for the helpful tips and video, gives me confidence 👍 👏, , keep up the good work.
@CIPGAS3 жыл бұрын
Thanks!!!!
@joshlottman89272 жыл бұрын
Great video! Dealing with my 04 w8 Passat and rusty bolts have been the main issue
@chase_cmc4 жыл бұрын
Awesome videos having my b5 s4 rebuilt right now !
@CIPGAS4 жыл бұрын
Nice!! what’s being done?
@MrNanah38Ай бұрын
You my friend is a good teacher, thanks.
@fdac5764 жыл бұрын
Great content again! Handy tip to add a spanner to the end of your socket wrench gives you enough leverage if you can’t fit a breaker bar in. Fellow B5 S4 owner from the UK 👌🏾
@CIPGAS4 жыл бұрын
Great tip! Tried it a little earlier today. Thanks!
@limczo89662 жыл бұрын
Great video and thank you for a tip about installing lower control arm bolt through subframe, it helped me a lot !
@CIPGAS2 жыл бұрын
Happy to hear it helped
@2149mike3 жыл бұрын
This was so satisfying to watch! Thx b🔥
@CIPGAS3 жыл бұрын
Thanks man!
@BlueCrow72 жыл бұрын
Same set up as the VW Passat b5.5.. what a pig of a job when those bolts seize, plus when you don't have proper lift equipment. I've only replaced the lower control arm and link this time and doubt I'll have the car by the time the rest needs doing. Top video, very helpful - thank you :)
@jaysilver46708 ай бұрын
Thanks for doing this video. I've got a B6 S4 Avant and I'm about to order the control arms for my car. This video really showed me how doable this is. My local shop wanted to charge me around $800 to do the job...Looks like I'll save that money now.
@CIPGAS7 ай бұрын
Wow! Gotta love the savings
@jaypers2324 жыл бұрын
Thank you for the content!!! Super helpful - Bought a stock 2000 S4 in January and have been replacing and updating quite a bit. This is something I need to do very soon.
@CIPGAS4 жыл бұрын
Nice! Welcome to the club. Best of luck with it.
@PGHPYROKNIGHT4 жыл бұрын
Welcome to your new nightmare! Haha love the car but mines trying to kill me.
@PGHPYROKNIGHT4 жыл бұрын
Just replaced upper control arms, coil overs, radiator, upper and lower rad hoses, rear suspension, fuel lines, plugs coils and repaired connectors.
@CIPGAS4 жыл бұрын
GoFengYourself damn that’s a big list for such a short time lol
@karlthomasjensen25763 жыл бұрын
I am half way at replacing the front suspension on my 2002 Passat and love your video👍
@CIPGAS3 жыл бұрын
Glad it helped
@Anonymoose6663 жыл бұрын
Thanks for the video man, I'm about to replace my control arms on my new b5 s4!
@CIPGAS3 жыл бұрын
Congrats on the new car and best of luck with it!
@MrStroller4u4 жыл бұрын
just did my suspension on the allroad, pretty much the same... the spring strut assembly has to come out since the chassis is a bit different and the air suspension is on the way. keep those videos coming, great work. the next project is a RS6 C5 exhaust swap.
@CIPGAS4 жыл бұрын
Nice! I had forgotten the all roads had air ride. best of luck with the exhaust.
@nikolaisikes62453 жыл бұрын
If you wanted to get a more precise ride height, you can measure it before you jack your car up. just take the center cap off the wheel and measure from the center of your axle nut to the top of your wheel well. Just a note for others who watch this. Thanks for the walkthrough!
@CIPGAS3 жыл бұрын
Thanks for the info!
@Cabtrack_TTRS3 жыл бұрын
Continue man with video. You did it very perfectly
@CIPGAS3 жыл бұрын
Thanks a lot!
@g-track50653 жыл бұрын
I tell you !!!! Your a big help because I'm doing the same thing. I always be watching!!!!!! I will show you my car on I.G when I get done.
@CIPGAS3 жыл бұрын
Happy to help!
@andyporter15623 жыл бұрын
Really enjoyed your video i have an A4 B6 2004 model and it's due to have the suspension done excellent tutorial thanks from the UK.. ( new subscriber )
@CIPGAS3 жыл бұрын
Glad you liked it!
@cheveu8632 Жыл бұрын
I’m replacing (first time for me) all the front control arms on my A4 B5 starting tomorrow and thanks to your video I’m now feeling more optimistic on my chances. I’ve taken 2 days of leave so hopefully that’ll be enough x)
@cheveu8632 Жыл бұрын
answering myself to thank you for this video, worked like a charm! I didn't do exactly like you but all went well. I jsut hated myself for not owning ratchet spanners tho x)
@CIPGAS10 ай бұрын
Happy to hear it all worked out! And now you should get some ratchet spammers as a reward for a completed job lol
@joedasilva38 Жыл бұрын
Good video. Good pointers on flipping the bolts around!
@CIPGAS Жыл бұрын
Glad it helped
@aaronspilker13 жыл бұрын
Great video, getting ready to do this on my 2012 A7.
@CIPGAS3 жыл бұрын
Best of luck!!
@STEVEREEVES44443 жыл бұрын
I've got to do all my arms on my a4 this will be very helpful 👍pleasure to watch , perfect ! Thank you ! ......
@CIPGAS3 жыл бұрын
Glad it was helpful!
@donfreed2510 Жыл бұрын
A very clear and helpful video. Well done.
@CIPGAS Жыл бұрын
Thanks!
@telposh8 ай бұрын
Excellente tutorial very complete and well done! Thank you a lot!!
@CIPGAS8 ай бұрын
Good to hear it was good help!
@MkIIIGTi16v2 жыл бұрын
Really nice video! I've just replaced mine, including new KW V2 coilovers. This was a huge help! I haven't tighten the arms too much during installation. Tighten them to spec. with a jack underneath it, but on bouncy roads I do have a little clunky noise sometimes. Only driven a few miles, but wondering how it comes. He is a bit more bouncy with the new coilovers on it.
@yusufabdul71474 жыл бұрын
A6 2002 2.7....Loved the video. Had my control arms replaced. shop placed my lower arm put them in the wrong position. Human error. Shop reposition the arm. All good.
@CIPGAS4 жыл бұрын
Glad it got fixed. Hope the A6 keeps treating you well.
@FYI863 жыл бұрын
Top job dude. Kudos to you buddy
@CIPGAS3 жыл бұрын
Thank you
@peekaboo43903 жыл бұрын
I started doing my full suspension rebuild today including the Solo Werks coil overs. Indeed the upper control arm pinch bolt may need some TLC to get loose ... Deep creep penetrating oil and heat and plenty of patience .. go slow and don't use air tools.. you don't want to break that bolt!
@peekaboo4390 Жыл бұрын
@A Because my suspension was toast and was chewing up tires in rap tempo.
@tomiknaapi21393 жыл бұрын
Thank You for great Video and Tips, it helps a lot.
@CIPGAS3 жыл бұрын
Happy to help!
@SCRAPPY-6 ай бұрын
Replaced mine using this video , thanks !
@CIPGAS5 ай бұрын
Glad it helped
@salimsirieh Жыл бұрын
Great video!
@garydefalco4812 жыл бұрын
Well done, very clear.
@karleastman5456 Жыл бұрын
Very Informative! Well done Sir
@CIPGAS Жыл бұрын
Thank you!
@diystuff56282 жыл бұрын
Bolthead is set towards the walls as a security measure! If the nut comes loose the control arm will not fall out and make you loose control...
@jorgeperme11313 жыл бұрын
Great job mate !
@CIPGAS3 жыл бұрын
Thanks a lot!
@fredliperson91712 жыл бұрын
Just a heads up for everyone..."Kroil" is the best for freeing up any rusted up hardware ....It cost an arm and a leg and you have to order it but it WORKS!
@PeterM09113 жыл бұрын
The proper way to replace tierod ends is to count how many turns it takes to remove it. You will be off by very little on the alignment with the new part. And DO NOT turn the tierod's spindle in the bore because it causes wear, which can results in less than required clamping force on the spindle.
@nzrestoration94864 жыл бұрын
Very well explained thx. Just a point of interest, the reason Audi put the bolts that way around at the factory is typical German engineering in that if the nut comes off the bolt can not come out so you don’t suffer complete suspension failure! But I agree the reversing of the bolt in practice terms makes little difference.
@CIPGAS4 жыл бұрын
Makes sense, and it’s actually a very smart way to guarantee safety. But damn is it annoying lol
@johnhealy2001 Жыл бұрын
Good job no other words
@CIPGAS Жыл бұрын
Thanks!
@tjbrewster693 жыл бұрын
Excellent video. Just got and estimate from BMW of Tucson for this exact job. Almost 4K for my S7. You've saved me a fair amount of coin. Thanks and keep the knowledge flowing. BTW noticed the Cactus league shirt....You in AZ?
@CIPGAS3 жыл бұрын
Wow that’s an expensive quote! And no actually my brother plays out there so I benefit from the gear 😆
@dissoc8885 ай бұрын
Such a good video
@CIPGAS5 ай бұрын
Thanks!
@duanehood6342 жыл бұрын
Thank you!
@detswbeach2 жыл бұрын
Thank you,... great video.
@CIPGAS2 жыл бұрын
Glad you liked it!
@zaftra10 ай бұрын
super instructions.
@peterskalak19653 жыл бұрын
Thanks my brother!!!!
@CIPGAS3 жыл бұрын
Any time!
@larryboyer9204 Жыл бұрын
Very nice video...Have you or anyone out there put anything together on installing the 034 rear upper adjustable control arms - and also how to adjust them for alignment? thank Larry
@daveythomas44734 жыл бұрын
I always change the c links to poly bushes immediately I've had them fail in no time on 3 S4,s even the good quality lemforder ones with an annoying metal sounding clunk over slight holes in road hard to diagnose
@CIPGAS4 жыл бұрын
Damn that’s annoying. I’m upgrading the end links for the front and rear soon with the new sway bar installs so I hope they will last me a few hundred miles.
@michellebonawitz55832 жыл бұрын
How long would u say this entire process took? Im about to start on my B5.5 Passat Wagon, except I’m throwing in all 4 new subframe bushings as well. I was kind of saddened to see that you didn’t take on the dreaded subframe lowering! Lol. Great video, so much appreciate all the knowledge i’ve gotten from your other video’s as well!
@Anthony9928a Жыл бұрын
Cool 👌
@barfly2463 жыл бұрын
new sub here.. keep up the great content
@CIPGAS3 жыл бұрын
Thank you!
@Mike-bt3ki4 жыл бұрын
This video was made just in time, because I need to change mine soon. Thanks for the video. So is this Delphi branded kit of good quality?
@CIPGAS4 жыл бұрын
Nice lol that good timing. They are good quality and have great reviews. Good thing is because of FCP Euro they have a lifetime warranty.
@gravitygabri3l3 жыл бұрын
Can you do a video on how to change the center drive shaft bearing? Seems to be a pretty common issue with these B5 S4s.
@CIPGAS3 жыл бұрын
Yeah looking into options now.
@easycomeeasygo89012 жыл бұрын
When i bought my b5 s4 in 12' with 125k it was making all kinds of noises. The top control arms dont last as long from what i seen. 40 to 80k i hear. Sounds about right. My 034 arms i put in top control arms started cracking in only 35k miles. And 2nd meyle set about 40k. Even with suspension tightened down at ride height. Bolt that holds shock in corroded solid inti bushing. Had to cut bolt. Marine anti seized the crap out of it. I also am a torque spec guy. These bolts are TIGHT! Torque to yield as well. Bought some torque adapters for the job. Worked nice, but expect it to be a PITA, lol. Oh and you might want to check your strut mount as well. They dont last very long either..... nothing on this car really does... u kind of just get used to it. If u come from the world of never have to fix anything jdm? You would probably dump in car in 6 months or less🤣
@Ian-zj1bu3 жыл бұрын
It's a good idea to put the pinch bolt in the other way around too incase you need to hammer it out next time
@CIPGAS3 жыл бұрын
Yes definitely!
@cristopherguerra28582 жыл бұрын
What size is the bolt as in thread pitch and length of the rear most control arm , the one you cut , bc I’d like to purchase the new bolt so I can cut the old one out for the same reason of not wanting to drop the subframe
@samdavenport66043 ай бұрын
Do you know if those orange tabs in the back lower arm bushing were supposed to be left in? My arms came with those too and I left them in like you did
@quattroesp3 жыл бұрын
perfect job ! thank you ! sub
@CIPGAS3 жыл бұрын
Thanks!
@mikemacb7rs43 жыл бұрын
I have a B7 RS4 it shouldn't be that much different. Thanks!
@ceezauto2133 жыл бұрын
Great video, is this the same process for the 2004 Audi A4?
@CIPGAS3 жыл бұрын
The process should be very similar
@tomburton66252 жыл бұрын
Can anybody tell me weather or not its important to do all of these? Rather than jsut replace one at a time with wear?
@zzly9338 Жыл бұрын
3:40 would there be enough room for an angle grinder there? Cause fuck that if you're replacing the bolt anyway
@mrrobertwolfiii1079 Жыл бұрын
I was owned for this time in my history
@BreathingFire Жыл бұрын
9:14 bolt installed in opposite direction and not possible to use pneumatic hammer to extract it in the case it needs to be removed.
@MrJagioo54 жыл бұрын
Great Vid, I am about to do my control arms. Do you have steel or aluminum uprights? i know some of these kits have issues not fitting the lower control arms if you have aluminum.
@FindFlexOG4 жыл бұрын
from my understanding the aluminum uprights have a sleeve insert in them to accept the control arms.
@CIPGAS4 жыл бұрын
I have steel uprights. When shopping for control arms most kits will be for the steel uprights so you have to make sure you look at the vin designations for the control arms you’re looking to buy.
@whatsup8464 Жыл бұрын
B5 has the larger tapered ball joint for front lower control arm its 22mm...b6/b7 has the smaller tapered ball joint 16mm...b5 came with cast steel uprights there after b6/b7 etc came with aluminium uprights..
@ianhennessy31614 жыл бұрын
Has everything been holding up so far without torqueing everything down to spec? I've been trying to tighten to factory specs down but for obvious reasons can't fit a torque wrench anywhere. Is it even necessary?
@CIPGAS4 жыл бұрын
Everything has held up perfectly. I’ve done a few control arm installs without torqueing for the reason you mentioned and none have had issues. Honestly if I was able to torque everything down I would but it’s impossible, so very tight has worked just fine lol
@ThickGr33nNugs Жыл бұрын
Boss 👍
@CIPGAS Жыл бұрын
Thanks!
@JT-rt9pu3 жыл бұрын
lots of noise coming from my Audi A6. thank you
@CIPGAS3 жыл бұрын
Glad it helped
@chchris12332 жыл бұрын
Is there a need to use a torque wrench at any point in this process? I’m changing my suspension on both sides this week.
@CIPGAS2 жыл бұрын
A torque wrench is always a good idea. But for some of these bolts it’s impractical because of the access to them
@sal_thee_man2 жыл бұрын
I was able to use a torque wrench for all of them. The most challenging is fitting one for the top two control arms. Have to experiment with some extensions and even then there's some interference with parts. But you can still get it to the correct torque value. Doing it proper gives peace of mind and ensures that it was correctly done.
@andrewpastorelli18613 жыл бұрын
Any idea why the lower control arms have two different holes to choose from?
@CIPGAS3 жыл бұрын
Don’t quote me on this but I think the second hole is for the RS4 placement. The RS4 and S4 use the same subframes and lower control arms. Instead of making a set of longer arms Audi decided to extend the base mounting point.
@sal_thee_man2 жыл бұрын
Extra negative camber on the inner hole. Need a spacer for the control arms and the axles though.
@AG-vk9gq2 жыл бұрын
Hi you forgot to mention to take a measurement from the wheel arch to the center of the wheel for the 'unladen' measurement. You need this measurement before you finally tighten the arm bolts.unladen is the car full of fuel and nobody in it .
@redpill26342 жыл бұрын
No, he did not, he said to to jack up wheel hub to approax ride height aka pre-load it , yes you can measure distance from wheel center to arch too.
@MrGilly2 жыл бұрын
BTW what brand arms did you reinstall?
@CIPGAS2 жыл бұрын
They’re Myle control arms
@MrGilly2 жыл бұрын
@@CIPGAS thanks! How have they been holding up? I read reviews that the bushings wear out very early. Did you install Meyle HD or just regular?
@MrBasically8105 ай бұрын
Bro my axle came off my wheel hub while doing this? Do I just slide the axle back in? I’m confused
@CIPGAS5 ай бұрын
If you removed the axle bolt in the middle of the hub then yeah slide it back on and you’re fine.
@MrBasically8105 ай бұрын
i didnt remove the axle bolt thats the thing@@CIPGAS
@MrBasically8105 ай бұрын
I didn’t remove it lol the boot was already torn and the back side just slid out
@JG-es7bf2 жыл бұрын
Hey bro, I'm about to get the whole Delphi kit as well but I don't see it listed on FCP Euro as an option for the B5 S4. Did you have any problems installing it? It's been a little while now, so, how do you like them? I have a 2001 Stage 3 K04 S4. Thanks man!
@easycomeeasygo89012 жыл бұрын
If you haven't already id look into the meyle hd ones. Bushings are a little stiffer. Iove it. About 100 more then dephi kit
@JG-es7bf2 жыл бұрын
@@easycomeeasygo8901 Yes! I was actually looking at Meyle's at ECS or Febi Bilstein's at JHM... Febi's are more affordable.
@easycomeeasygo89012 жыл бұрын
@@JG-es7bf id try to stay fcp euro for the warranty. The uppers dont last a long time, lol
@JG-es7bf2 жыл бұрын
@@easycomeeasygo8901 Very good point! Thanks man! I appreciate it.
@easycomeeasygo89012 жыл бұрын
@@JG-es7bf Good luck. I have 59% ecs 39% fcp, 2% miscellaneous parts. I discovered fcp later by accident. Not sure how i missed it. Fcp is the autozone of the German industry. Life time part replacement. I had to cut the rear toe rod on the b5 s4 to remove it. They still replaced it for me. Anyway good luck again. And happy motoring.... and b5 fixing, lol
@user-kw4hq5vc5b2 жыл бұрын
ЛЕМФЕРДЕР СКОЛЬКО СТОИТ???
@Mike-bt3ki4 жыл бұрын
What coilovers do you have on your car?
@CIPGAS4 жыл бұрын
Solowerks at the moment
@byronarriola43042 жыл бұрын
Where are the torque specs?
@nolansmokes3 жыл бұрын
The hardest part is finding a shop that can do an alignment because of how low I am
@CIPGAS3 жыл бұрын
Yeah man, I definitely understand. I went through the same issue.
@LiveYourLifeeeeeeee Жыл бұрын
Can I align my self?
@CIPGAS Жыл бұрын
If you have the correct measuring tools to get the job done.
@thomebau89521 күн бұрын
You bought the wrong tie rod ends. These are for the A4. The S4 and RS4 don't have rubber dampers in them. This is very noticeable when driving.
@fennhoppe17463 жыл бұрын
Is this the same as for the b5 a4 1.8t?
@CIPGAS3 жыл бұрын
Yeah the process is exactly the same
@fennhoppe17463 жыл бұрын
Thanks. Also I’m at the part on the lower control arm where you cut the bolt in half because there wasn’t room to pull it out. How can I get it out without cutting since I don’t have that tool
@crescentandstarglory3 жыл бұрын
What kind of shocks are you using? Brand?
@CIPGAS3 жыл бұрын
Solowerks
@crescentandstarglory3 жыл бұрын
@@CIPGAS how do you like them? Do you recommend?
@CIPGAS3 жыл бұрын
@@crescentandstarglory They’ve been great. Super compliant and good quality. They’re not the the best performing coilovers but for daily driving they’re perfect.
@crescentandstarglory3 жыл бұрын
@@CIPGAS Thanks. Did you have to mount the coilovers or they came mounted?