4x BMW E30 Brake Caliper [Restoration] - Gold Zinc Finish | BMW E30 325i Sport Restoration S2 E3

Рет қаралды 688,771

5 жыл бұрын

Thanks to AutoDoc for sponsoring today's video! Check them out at the links below!
- interstitials.onelink.me/1036...
- / @autodocuk
Thanks to GLW Engineering for helping me blast and paint the chassis. Check them out here - www.glwengineering.co.uk/
This week I restore all four of the brakes from the E30 to a factory gold zinc plated finish. This one got delayed due to post getting lost. Slowing getting sorted in Spain but still in the process.
Like, comment and subscribe, for restoration videos every week.
If you would like to send me something to restore, tools to use or anything to support Restore It, please email:
Restoreitchannel@gmail.com
Tools & equpitment used:
Quartz Lacquer - goo.gl/8PTVKM
Base Coat Paint - goo.gl/mWhufG
Rust Remover - goo.gl/13gopW
Moldex Full Face Mask - goo.gl/NNYGrv
FGL 5 Spray gun - goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - goo.gl/cHTJS2
Colad Washable Overalls - goo.gl/3Css9E
Colad Mixing Cups - goo.gl/8DYmE8
Colad TurboMix Sticks - goo.gl/cYZfks
Colad Synthetic Paint Strainers - goo.gl/H79ZgL
Steel wire bits - geni.us/keyaD
Rotary Tool - geni.us/HGed
Concentrate Degreaser - geni.us/yUn9
Mannesmann Socket Set - geni.us/HCDZ
PROCESS:
Firstly I remove any brake pipes from the calipers. I then dismantled them completely. I then wash all of the pieces in the parts washer before plugging them with moldable plastic to protect against the blasting media in certain areas.
I then blast all of the parts excluding the pistons. Once all of the grease, oil, dirt, and rust has been removed, It's time to zinc plate the main pieces. It took me three days to plate and passivate all of the parts including dry time.
Whilst I was waiting for them to dry, I blasted the clips for the rear brakes and painted them in heat-proof black and clear coat. It was then time to put everything back together. I used a cool trick of putting the seal on the piston before installing it. This made life so much easier. The pistons should go in without any mechanical force.
WIth the pistons back in I added the sliders and pads before finishing them off with new rubbers and bleed valve covers. The restoration was complete.
- Disclaimer: I am no professional. Especially when it comes to electrics. It's certainly an area I am looking to improve in. I am completely self-taught and have no previous trade experience. I would appreciate any feedback, advice or constructive criticism.
I don't add music to these videos so that you can choose to listen to what you like if you would like to.
I am doing KZfaq full time, 7 days a week, so any support is appreciated.
Become a patron to win the Items featured in these videos!
Patreon - / restoreit
Follow me on Social media to keep up to date with videos and giveaways.
Twitter - / restore__it
Facebook- / restoreitcha. .
Instagram - @RestoreItChannel
Patreon - / restoreit
Discord - I now also have a discord server if you want to chill with like-minded people and maybe learn something new. - / discord

Пікірлер: 702

@Rusiputki 4 жыл бұрын

Ok, Ok I will help you out for those that are stuck and can't get the pads back in (E36 etc). So no matter which way you try like the guy in the video there isn't enough space right? Remove the sliding pins, put the pads in and then put the sliding bracket over the pads (copper grease etc.), finish it off with screwing the pins back in. Also you will notice fitting the sliding pins from this side allows you to load them up with much more silicone grease.....you're welcome! it's how you would have done it if they were mounted on the car by not removing the entire caliper, leaving the bracket on.

@bigmastertyrone 2 жыл бұрын

wasted so much time trying to do it like this guy shouldve checked the comments first

@Tiagotaf 5 жыл бұрын

This is so satisfying!! Specially the zinc coating. Good job!

@HandToolRescue 5 жыл бұрын

Nice one Steve!

@slackjaw703 5 жыл бұрын

It’s always nice during a busy day to pump the brakes (so to speak), kick back and watch another awesome video of yours! Thanks for posting!!

@sungn4512 5 жыл бұрын

lovely back to brand new status great detailed handiwork, patience, craftsmanship thanks for taking the time to put this together

@wilmerschock 5 жыл бұрын

That terrazzo floor is the best, durable, smooth, easy to clean, looks great. There's nothing like it for an immaculate workshop. What a great base for your new working environment!

@RestoreIt 5 жыл бұрын

Thank you Wilmer! A lot of people have suggested i cover it, but i also quite like it.

@AllanO808 Жыл бұрын

Yes, but spraying paint around...no sheeting or spray booth, (cardboard box will do.. hmmm

@stephaniesander5465 5 жыл бұрын

This is just my opinion. A great part of enjoying restoration videos is seeing how it looks at the end. You show the end product in the thumbnail, taking away the “surprise” - the “wow” factor.

@robertrishel3685 5 жыл бұрын

This channel is so addictive. Nice work. Cannot wait to see this car completed!

@ZMO999 5 жыл бұрын

Awesome as usual! Can’t wait to see the car rolling. 👍🏻

@RestoreIt 5 жыл бұрын

Thanks ZMO999! It wont be long!

@noodnutt 5 жыл бұрын

When I was a much younger fella, I worked in an electroplating shop. Firstly, we used metal hanging brackets as they gave greater conductivity and surface area contact, but!..... Secondly, when we had odd shaped items we knew would not plate well, we always added an additional contact wire as close to the affected area, this extra wire would help spread the current more evenly and efficiently hence increasing said area of electrical excitement and attracting more of the energised particles. Seemed to garner better results for us, I'm going back 40 years so technology may have improved since then.

@aserta 5 жыл бұрын

They have custom racks now with selectable paths. So you coat section A then disable that one's path, and start path B and so on. Visited a plating business for antique restoration recently.

@M1LAD81 5 жыл бұрын

Nice work! I love how the calipers came out looking. Well done and keep up the good work on this restoration journey. Be proud!

@deancollins8229 5 жыл бұрын

You do such excellent work ! I have been watching since you started this project and have enjoyed every video . Looking forward to seeing the finished project .

@suziemack7269 4 жыл бұрын

Wow. Just love your videos. I know nothing about cars but I can watch you all day!

@Stuntman707 5 жыл бұрын

Brilliant restoration as always.

@ayyahuasca9722 5 жыл бұрын

The metal plating is gorgeous. Very good work.

@Lameosity 5 жыл бұрын

It must be so much nicer doing this work in the new shop/workspace.

@RestoreIt 5 жыл бұрын

It's amazing thank you Aaron. A lot more walking but I'm getting used to it. The shop is only 20% finished, so I have a lot of work ahead of me.

@Lameosity 5 жыл бұрын

@@RestoreIt Only 20 percent?? Wow I can't wait to see what else you have planned!

@jstrndm945 5 жыл бұрын

Agreed

@commuterdude3053 5 жыл бұрын

Keep on keepin on. Your inspireing me to do this with my car

@Sid978 5 жыл бұрын

Děkuji za video, vysoce kvalitní obraz fotoaparátu. Good job!

@malcolmporter4771 5 жыл бұрын

They look amazing! Awesome!

@davidbrowne9984 5 жыл бұрын

Great video, excellent work. The finished product looks awesome. Keep up the good videos 😀.

@AliensDidIt 5 жыл бұрын

Can't wait for the next shop update video! I love your videos!

@davef.566 5 жыл бұрын

Hello you are not shy when it comes to hard work l swear you did everything the hard way but l was entertaining thank you so much for sharing

@loulew2 5 жыл бұрын

Awesome job n very interesting viewing. Thanks n keep up the good work...

@kossi2607 5 жыл бұрын

I am really excited to see the fully restored E30

@scottcrawford4148 Жыл бұрын

Phenomenal restoration

@ahmadqaddori9755 5 жыл бұрын

really addicted to your videos man , keep going

@screwsnutsandbolts 5 жыл бұрын

Great work ! 👍🏻

@FlashFailLPs 5 жыл бұрын

You should get some big rubber sheet and put it on the tables. It will look nice, you wont damage the wood and most importantly its super easy to clean. Also put some at least 5mm plate under your vice to eliminate the flex when you were removing the brake lines at 4:40. Keep up the good work, your videos are my inspiration

@RestoreIt 5 жыл бұрын

Thank you Jondra! You read my mind. All of this to come in the workshop videos!

@billllthegreat 5 жыл бұрын

Buy you a set of flare wrenches also, it will help you not strip out your hose connectors.

@Tobberobbe97 5 жыл бұрын

@@RestoreIt Could also consider a sheet of acrylic for the disassembly bench, even easier to clean, and easily replaced. Also extremely cheap.

@NoorShaheed 5 жыл бұрын

Im always watching your videoes.. Please hurry up we need more videos in week:(

@RestoreIt 5 жыл бұрын

Dude thank you. This video is two weeks late. I am so frustrated, it's unreal. I have another video completely ready because of a postal issue. Expect a lot more content soon. More than one video a week. I'm still getting on my feet in Spain, it's a right pain in the ass. But soon I'll be there and the content will flow.

@kampfspetzle 5 жыл бұрын

@@RestoreIt Come to Germany when ur car is ready

@jasoncdebussy 5 жыл бұрын

@@RestoreIt How are things going for you in Spain? I'd really like a video where you just talk about the reasons for moving, how you chose where you are, pros and cons etc

@Daedalus_UK 5 жыл бұрын

@@RestoreIt Power plug should be protected more from liquid.

@albertomolina8682 5 жыл бұрын

Interesting your work great detains. Thanks you very much for all steps. I have seen 3 o 4 times that video and I tell you I am not tired. I live in Nashua NH and I am becoming to be your fan.

@YZFMANIAC08 4 жыл бұрын

Sweet finished product!

@DanteTheAbyssalBeing 5 жыл бұрын

Watching this makes me think I should finish off refurbing the wheels I've had in my garage for the last 6 months ;) Nice job, as always man :)

@Lukasz531 5 жыл бұрын

Zinc plating gives incredible results!

@mongosaqqara 5 жыл бұрын

Thanks man...always enjoy your work...amazing

@PHATJANUS 5 жыл бұрын

Electroplating only works when there is clear line-of-sight between the anode and cathode. If the inside of the caliper did not directly face a plate the zinc will not transfer.

@mrrustman1657 5 жыл бұрын

Your plating solution also needs movement... this video might help you...kzfaq.info/get/bejne/hNOebJdzmru5pYk.html

@patricklandusky7467 5 жыл бұрын

In addition to PHATJANUS and rustmans comments you need good current density throughout the part. The current will take the path of least resistance, in a larger part like the front calipers you didn't get much current through the underside there. So more current and/or you can also try moving your contacts around for a better result. AND If you're going to be plating parts at home BAKE THEM after. With zinc nickel plating and acid pickling you are at risk of introducing hydrogen into the microstructure of the steel and making it brittle. It's really only of concern for hardened parts but as a safe bet it won't hurt to just bake everything. Look up hydrogen embrittlememt for some recommended times and temps, but you want to bake those parts within an hour of plating/passivating for a couple hours at 180C or so. Keep up the good work!

@KineticLatency 5 жыл бұрын

@@patricklandusky7467 You seem to know your stuff. In the video he plates the sliding pins and the inside of the bits that the pistons sit in, would that interfere with their operation as you're adding a layer of zinc to something that should already be a very tight fit?

@liltimmyotoole 5 жыл бұрын

@@KineticLatency The pistons should be sliding on the seals, which will be a smaller diameter than the inside of the cylinder, so a thin layer of zinc shouldn't affect it.

@eddiebrown9590 5 жыл бұрын

@@KineticLatency thats why he left the seal in place till the finish.

@abdulrosid8326 5 жыл бұрын

I can't wait to see your brand new BMW

@spkay31 5 жыл бұрын

Very nice work. Excellent results.

@essamkhatri3978 5 жыл бұрын

YOU ARE SIMPLY A BRILLIANT PERSON.... 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

@digitalrailroader 5 жыл бұрын

Time to christen the new workshop with an E30 restoration video!

@RestoreIt 5 жыл бұрын

Oh hell yes! So many more to come :)

@digitalrailroader 5 жыл бұрын

Restore It can’t wait to see them!

@Mrcaffinebean 5 жыл бұрын

Wow that playing came out great!

@yaikerz1 5 жыл бұрын

Amazing! I love your work and you inspire me to restore my truck!... greetings from Argentina!

@RestoreIt 5 жыл бұрын

Thanks Yaikerz! Good to hear!

@JaacobJack007 5 жыл бұрын

Peace of art ! Wow

@RestoreIt 5 жыл бұрын

Thanks man!

@fuscopi 5 жыл бұрын

Beatiful job.

@theprodigy01uk 5 жыл бұрын

Nice job man. They came out good. I hate breaks at the best of times, you made it look easy :) nice!

@RestoreIt 5 жыл бұрын

Thanks dude. It certainly was not easy haha.

@sparkeyjones6261 4 жыл бұрын

Wow, they look beautiful. Great work. I rebuilt mine a couple years ago. I didn't have access to a blaster for the rust, so just soaked the calipers in a couple gallons of vinegar. That actually worked really well. I need to learn more about your zinc plating process..... that looks highly interesting.

@atharvakhemkar4629 5 жыл бұрын

You should paint it red It will give you extra 20 whp

@Niggabalzz 5 жыл бұрын

dont you mean bhp??😂😂

@eugy0763 5 жыл бұрын

And +25 bhp for yellow one

@CA-gy4qf 5 жыл бұрын

@@Niggabalzz wheel horsepower is more relevant than brake horsepowers, you can lose a lot of power between the engine and wheels.

@Niggabalzz 5 жыл бұрын

@@CA-gy4qf i said BRAKE hp because he is restoring the BRAKES😂 come on man it was just a joke

@CA-gy4qf 5 жыл бұрын

@@Niggabalzz that one went way over my head I'll admit 😂

@qwerrrz202 5 жыл бұрын

That's a great result.

@alonzosanchez8577 5 жыл бұрын

Very Nice Job Bro Those Came Out Factory New

@youtubasoarus 5 жыл бұрын

Beautiful result! Great job :)

@2003garyb 5 жыл бұрын

Hi, Steve! Your new shop is awesome! Your brakes turned out really nice. I like how you have a system to plate/coat them. Your car is going to be a show piece. I'm saving up now so I can get over there for a ride once it's finished. Hahaha! See you soon in the next video. Take care, my friend.

@rosewd2 5 жыл бұрын

I liked the idea of outing the pressure blaster hose in the bead cabinet, I'll have to try that.

@anthonygillesse7242 4 жыл бұрын

Excellent job

@kdoran709 5 жыл бұрын

Great work

@mgmg3561 5 жыл бұрын

Brilliant, absolutely fine ... my Led Zeppelin of restoring videos ...

@arnhemseptember2009 5 жыл бұрын

Great job!

@mohamadshaheen1196 5 жыл бұрын

BMW Company Proud of you

@Gilly14 5 жыл бұрын

Your new shop is very nice.

@RestoreIt 5 жыл бұрын

Thank you, Gilbert. It's only around 20% finished. I have so much to do. As well as keeping the restoration videos coming. I'll get there :)

@becomematrix 5 жыл бұрын

Slick result!

@burstyplr223 5 жыл бұрын

i get so excited when there's a new upload.

@TCK71 4 жыл бұрын

This is a fantastic series of restoration videos, I’m loving them!

@user-dx6pt9oo6h 5 жыл бұрын

Very good restoration bro 👍👍👍👏👏👏👏

@RestoreIt 5 жыл бұрын

Thanks man!

@johnnyf55 5 жыл бұрын

As always excellent content, keep up the good word dude!!

@the_hate_inside1085 5 жыл бұрын

Cant imagine a lot of used brake calipers that gets to go through this deluxe spa treatment. Looking pro with that putty to mask surfaces from the blasting. +1

@tarasque01 5 жыл бұрын

During the zinc plating I noticed a little taste of nostalgia in the background...the label container drawer organizer. Yep that was always there in the old shop in view. Glad it's still around. Relief.

@budukin2010 5 жыл бұрын

Чувак, ты лучший! Просто красавчик! Терпения тебе !

@faridbahal1 5 жыл бұрын

これはどう？あなたはそれを読むことができますか？

@user-kv4oe3gq2z 5 жыл бұрын

Сам кайфую просто,золотые руки ,так мотивирует !

@lolman77 5 жыл бұрын

Blyat !

@user-dl5zi7zo3i 5 жыл бұрын

Мороз Николаевич лайк тебе

@amrsaleh81 5 жыл бұрын

فيديو تحفة فنية شكراً لمجهودك عمرو

@waynewoodward2313 4 жыл бұрын

well done young man!

@srpacific 5 жыл бұрын

Another method is to leave the pistons and seals in place, then remove the brake lines and seal the opening with another brake bleed screw (usually it’ll be the same thread as the brake line). The bleed screws are cheap and you can plug the end with silicone or something. This lets you sandblast every surface that will be exposed to the elements, then you remove the old stuff and clean the inside of the caliper by hand

@umarjavaid4560 4 жыл бұрын

Fantastic job i liked

@upfactoryracing4148 5 жыл бұрын

Looking good! Back to spec with a little bit of elbow grease!

@moh78amed Жыл бұрын

Good job , respect 👍💪

@Mr229357 5 жыл бұрын

Nice work 👍🏻👍🏻👍🏻

@benderr0driges 5 жыл бұрын

They had excellent condition.

@TheVwgolfmk1 5 жыл бұрын

Great job, what a transformation. They're better than new and will look fantastic on the car. How much longer do you think it will be till you start to actually rebuild the car. I think it will be priceless when it's done due to the immaculate detail you go to on all the restoration. Can't wait to see it.

@that_laughing_hyena 5 жыл бұрын

just in time for my birthday thanks :)

@RestoreIt 5 жыл бұрын

Happy birthday Justin :D

@that_laughing_hyena 5 жыл бұрын

thanks keep up with the quality because it's always a joy to watch your vids

@yassinbenlahrech837 5 жыл бұрын

i love your work

@DIYFixMan 5 жыл бұрын

nice work

@user-oh6qc8nm4f 4 жыл бұрын

Nice job!

@peterdushaj5262 5 жыл бұрын

This is gonna be the cleanest E30 on the planet when it's finished.

@M_G_D_1 5 жыл бұрын

So damn satisfying

@SertEngineering 5 жыл бұрын

Neat work. Good job.

@lucianomatterazzo6084 4 жыл бұрын

very good job !

@hashemalrawee8710 5 жыл бұрын

wow very good job

@phillipnewton8910 4 жыл бұрын

It's so nice watching these videos knowing that if I want to learn a better way to do it all I have to do is read the comments from all of the couch blistered experts.

@stevecruz3724 5 жыл бұрын

New workshop love and them calipers are shot

@archygrey9093 2 жыл бұрын

You are very brave having your fingers so close to the piston when popping it out lol, usually i will lay a folded up towel on top of the caliper just in case things go wrong.

@jasoncdebussy 5 жыл бұрын

When I get notification of a new video by you I stop whatever I'm doing and watch immediately. Love it!

@COOKWOW 5 жыл бұрын

Nice job

@154Jamesp 5 жыл бұрын

Beautiful job as always. I always put a high temp clear over zinc plated calipers. Just about all wheel cleaners are acidic and will burn the zinc right off.