5.3 / 4L80E Installed In The 64! First LS Swap!

Рет қаралды 8,260

2 жыл бұрын

This is my first LS Swap ever. It's a big cam 5.3 and a stock 4L80E.
in order to use a 4L80E with a 5.3 you have to use a adapter/ spacer for the flywheel.
Please LIKE, COMMENT, SUBSCRIBE, and SHARE

Пікірлер: 69

@jamesp1586 2 жыл бұрын

Nice work i’m trying to get some ideas for doing my 63 thanks for the video

@sofreshbeats8917 9 ай бұрын

Thanks for the tips! Going to be doing the same soon! Will save this video

@classicpatinas 9 ай бұрын

No problem man. I have a very detailed video on my channel as well

@hpjunke 2 жыл бұрын

Sawweeet fits like a glove 👌🏼

@ryanterpstra5158 2 жыл бұрын

Totally love 64 impala 4 door sedans, and an LS is just making it even better, going to be a wicked daily driver!

@classicpatinas 2 жыл бұрын

Thank you man!

@traviswilliams2703 2 жыл бұрын

I'm happy to see these videos that you're doing . Keep working

@classicpatinas 2 жыл бұрын

Thank you man I really appreciate it!

@funonoldwheels7150 2 жыл бұрын

Good video series. Nice work on that LS swap, and the floorplan repair.

@classicpatinas 2 жыл бұрын

Thank you man I really appreciate it

@stevepope5484 8 ай бұрын

Bolt hole! Same as me. Put stack of washers between. That got mine in

@classicpatinas 8 ай бұрын

kzfaq.info/get/bejne/feCaY8yhsNKtZok.htmlsi=ontVMaHqv3iKlwDu Go watch the How to video! Links for all parts used in the description too!

@stevepope5484 8 ай бұрын

Thank You!!! My trans is the 4l60 sitting 5degrees? I welded a perch to my stock cross/ lower/than stock. It'd be impossible to go forward unless I raise the oil pan up n over.hope I'm done there/long is it don't wear a slot in the oil pan. I'm curious about your harness too. There ain't but a few wires on my fire wall now.67 malibu.wonder if your 66 El and mine are identical/ maybe/maybe not. It's been resting agood while now.

@BLK_WILL_SS 2 жыл бұрын

Man that’s what I’m talking about!

@classicpatinas 2 жыл бұрын

Yes sir! More coming soon

@CatlocosGarage Жыл бұрын

I'm locked in. I have a 66 2dr Ford Galaxie 500 doing a swap.

@classicpatinas Жыл бұрын

Good luck with your build man

@kobra_style 2 жыл бұрын

I just bought a 5.3 and a 4l80e for my 61 ragtop and I was curious about how to deal with the transmission crossmember. Your idea for how to solve that was genius!

@classicpatinas 2 жыл бұрын

Thank you man, I really appreciate it!

@wildestcowboy2668 Жыл бұрын

I can tell this guy knows what he is doing. I'm learning from him at home before I do my 64 drop top

@classicpatinas Жыл бұрын

@@wildestcowboy2668 thank you man I appreciate that. I’ve never done any of this before. Just learning as I go

@joegunter6201 Жыл бұрын

Man appreciate you sharing. I just decided to start swapping my 64 impala. I put a 327 crate engine knowing I shoulda LS'd it from the get go. Never would have known about the tranny bracket if you wouldn't have mentioned it for the 4l80e. Thank you!

@classicpatinas Жыл бұрын

Thank you man! I appreciate it. I have a more defined video on how I did it on my page. Please go check it out. I have every detail about it on there. The car is running and driving strong ‼️

@joegunter6201 Жыл бұрын

@@classicpatinas yea I watched that one as well and sub'd. Keep up the great content!

@dmdm9198 2 жыл бұрын

Just did this with a ls3 and 480le setup on my 64ss. I used the brp kit for the motor mounts and trans bracket but wasn’t to happy with the kit. Great job doing it by yourself it’s a pain with no help

@classicpatinas 2 жыл бұрын

Thank you man, I appreciate that

@carlosh8113 Жыл бұрын

What didnt you like about the BRP kit? I was ready to grab one for a LS swap.

@dmdm9198 Жыл бұрын

@@carlosh8113 it’s expensive for what it is and the pinion angle was off and only doable because I have an adjustable ford 9. Just a lot cheaper options out there that you have to piece together

@carlosh8113 Жыл бұрын

@@dmdm9198 Wow thanks a million, i was dead set on getting it and my rear end is an original, not putting skirts on it.

@user-ty5hm7fz1i Жыл бұрын

awesome job, I'm in the middle of doing my 64 with a LS 5.3 engine, what type of oil pan did you have to use for the change over? this video helps out a lot. Good luck bro

@classicpatinas Жыл бұрын

I used a stock LS1 oil pan. And stock coolant cross over. I used rear block offs and it’s just a cross over in the front. It have a tube connected to go the the water pump spacer.

@superiormotorclub1278 2 жыл бұрын

Love the build man, quick question what kind of fuel pump are you using for this swap, i have a vortex in my Impala i just don't know what fuel pump i can install in the tank so it can work with my engine

@classicpatinas 2 жыл бұрын

Video will be coming soon on my fuel system! In the process of making the fuel system now.

@superiormotorclub1278 2 жыл бұрын

@@classicpatinas great I can't wait to see the process

@stevepope5484 Ай бұрын

I did the exact thing with washers. But pan is still on the cross member. Its in but? 67 malibu. 302 oil pan from china? It's been a year since I touched it. New Master/ front lines. That was all. I might cut the cross

@classicpatinas 25 күн бұрын

Let me ask a friend with a 67 Elco

@classicpatinas 25 күн бұрын

www.amazon.com/dp/B095SL5SMT?ref=ppx_pop_mob_ap_share

@notch5274 Жыл бұрын

When you loosened up the mount on crossmember did u have to bang crossmember or anything out or Longer bolts on crossmember mount anything else besides loosin up bolts and mount everything on engine first thanks

@classicpatinas Жыл бұрын

i did not have to bang anything. just went right in.

@stevepope5484 8 ай бұрын

67 chevelle is same? I used ebay adapters s u ock mounts.4 washers under ea.bolt to raise motor. Ebay 302/2 pan. Sit right on the cross member. Order cast headers. Trans is 4 spd.from yukon. Took out my grill Still out. Motor trans together.stoke trans cross modified. Wonder which harness to buy? Advised to go high dollar?

@classicpatinas 8 ай бұрын

So the belair is an X Framed car. I’m not sure these parts will work the same. But I have another video that goes in depth of the parts I used on my channel

@classicpatinas 8 ай бұрын

I used a Holley terminator X Max. High dollar but 100% worth it.

@TheTryHardTuesday Жыл бұрын

Please help! I did a 5.3/4l60 in an El Camino, and I keep getting TCC codes. Did you have any issues with this on your swap at all? How did you get through it? Its the only thing keeping me from driving this car and I can't figure out what the problem is! My next LS swap is on my 64 Biscayne 2 door post. 6.0/4L80e and it seems like I can follow your videos directly and get it done so thank you! And thanks for your help!

@classicpatinas Жыл бұрын

What ECU do you have?

@TheTryHardTuesday Жыл бұрын

@@classicpatinas it's the stock cpu. It'll go in reverse, and run great. But as soon as I put it in drive it's like it's stuck in 3 gear or something.

@classicpatinas Жыл бұрын

@@TheTryHardTuesday I ended up using a Holley terminator X Max. So I’m not too sure. But are you positive that the wiring is correct?

@TheTryHardTuesday Жыл бұрын

@classicpatinas ended up getting it figured out. I was looking at a late year 2001 wiring schematic. I needed the early year apparently. They're a little different. Took the El Camino out yesterday and ripped a burnout. She's running great now!

@classicpatinas Жыл бұрын

@@TheTryHardTuesday glad to have helped

@kennethrichardson5454 Жыл бұрын

Morning sir, im doing the same swap. Which oil pan did you use? Im having clearence issues. First pan was hitting cross member, 2nd pan no clearence for tie rods and pan 3 no bueno all around.

@classicpatinas Жыл бұрын

I used a stock style ls1 oil pan. Also used a 3/4 inch spacer on the mounts so that helps with clearance

@classicpatinas Жыл бұрын

Without the spacers it won’t clear

@stevepope5484 8 ай бұрын

Mines touching.67 chevelle 302/2 copy.

@tresaunders8385 Жыл бұрын

Should I Should I expect the same issues for a 6.0 swap into a 64?

@classicpatinas Жыл бұрын

Yes, 5.3s and 6.0s are the same dimensions

@blaec4058 2 жыл бұрын

How was the trans / floor pan fit

@classicpatinas 2 жыл бұрын

It fits perfect, I did no cutting, hammering or anything. All you have to do is get for spacing right.

@blaec4058 2 жыл бұрын

@@classicpatinas thanks man gonna get the 700r4 cross member and adjustable ls swap mounts 👍🏼

@josephmora5050 Жыл бұрын

What did you do for ecu?

@classicpatinas Жыл бұрын

It has a Holley terminator X Max

@juniorpro2276 Жыл бұрын

how hard is it to do the installation

@classicpatinas Жыл бұрын

Considering this was my first swap and I was alone the whole time it wasn’t too bad. It was only hard because I couldn’t lift up on the back of the trans when I needed to sometimes

@juniorpro2276 Жыл бұрын

@@classicpatinas can u list all the parts u need to complete the swap

@classicpatinas Жыл бұрын

@@juniorpro2276 kzfaq.info/get/bejne/feCaY8yhsNKtZok.html