Did you get the Amazon one? Is it still working?

Hello Saif, Thank you for the support!

Hi, This adapter is similar to the Vstar 650/1100 custom adapter but for the Yamaha Stryker, Raider, Bolt, Warrior and some Kawasaki models. All adapters come with a QR code install manual in the box to help conserve on paper usage. All manuals can also be downloaded off our website.

Hi Julio, we run a Wisamic led in ours but have heard good reviews from other riders for alot of other brands. Make sure to look for the power output in watts (W) around 50 to 80 range. This will give good output. If you want a high end light JW Speaker will fit and makes a high quality light.

Thats great Joey! The stryker uses a 5.75in headlight.

@@nextlvlinnovation Hi guys, thanks for the info. This is my first bike, so pleaee excuse my lack of knowledge, but if the stock headlight is a 5.75 can't we simple swap it in? Or is it because the HID headlamps arent built the same as the stock, hence the need of the bracket?

@@Joey.Darkwoods-Studio Thats a valid question. The halogen headlights are custom setups and use their own special bracket. The aftermarket LED headlights are based on a different standard and are used heavily in Harley motorcycles.

All headlight products and wiring are water tight and should not cause any issues.

Hello, We have not tested this motorcycle with our adapter so we cannot be 100% certain it will fit.

This adapter is for 5.75in LED headlights. What year and model motorcycle do you have?

Hello Timothy, Please send us an image at our email address so that we can figure out the issue. Info@nextlvlinnovation.com

@@nextlvlinnovation okay brother.

@@nextlvlinnovation I sent an email to sales@nextlvlinnovation about it. Is this the correct email address to send the images to?

Hello, we do not have any adapter that fits the Vstar 650 classic motorcycle. We only have one for the customs

Hello, The cowl/windshield came with that motorcycle but I believe they are sold by a few different suppliers. Try searching Revzilla, Babbits oem parts, or low and mean. I think they come un painted.

Hi Trevor, There are alot of VT750C models that we came across. Could you send us any images you have of your headlight setup . Info@nextlvlinnovation.com

@@nextlvlinnovation Yes I can . I will asap

We offer both chrome Daymaker and Halo options on our website.

@@nextlvlinnovation what is the website name?

@@asadniazi9256 Www.nextlvlinnovation.com

Hello Joel, Here are a few that we have used and like. New Brightest DOT Approved 80W Osram Chips 5-3/4" 5.75" Round LED Projection Headlight Compatible with Harley Motorcycles Black www.amazon.com/dp/B071GCDC33/ref=cm_sw_r_apan_glt_fabc_BV4HSZ08NXQYFD2NX4WR SUNPIE Motorcycle 5-3/4 5.75 Halo LED Headlight for H arley Dyna Street Bob Super Wide Glide Low Rider Night Rod Train Softail Deuce Sportster Iron 883 www.amazon.com/dp/B07WS9RS97/ref=cm_sw_r_apan_glt_fabc_5229YJ20K3CXYKRSV7YK SEALIGHT 5-3/4 5.75-inch front LED bulb for Motorcycle. Plug and Play, 6000K-6500K Super Bright Light Pattern, Quick Installation, Over 50,000 Hours Lifespan, IP67-rated www.amazon.com/dp/B07FFQFCXW/ref=cm_sw_r_apan_glt_fabc_QNGPZWMBCXKVZD7A7VMH

We will have to check if this adapter will fit your Honda shadow. Please give us a little bit of time.

Thank you for your feedback. This product has gone through a couple redesigns but for the most part still covers the main concepts. As stated on the QR slip the instruction manual will always be the most up to date.

But since you don’t include that, those of us without printers have to read it off a phone or our home monitor. I would have appreciated the up to date printed instructions being included. Considering the minimal expense for that and the video being out dated, it would have saved hassle.

Hello, This adapter is for a 5.75in LED headlight and will not fit in your Vstar classic motorcycle. I believe your current setup will accept an aftermarket LED headlight without an adapter. Please confirm.

Do you guys carry them? If so , how can I buy it

@kingtut5401 yes please visit our website www.nextlvlinnovation.com and search 7in Headlights and these should work.

Hi Gerry, yes this adapter will work for the Vulcan 900 custom for the years 2007-2020.

Hello, This will not fit the 97 Yamaha Virago

Yes we do! You can get this product ob our website along with an estimate for shipping. Www.nextlvlinnovation.com/575v2

Hello, You can purchase from our website: Www.nextlvlinnovation.com/575v2

Hi Tom, You can order it at the link below. Right now we are out of stock but should have more available in the coming week. Please add your email to the list on the linked page. www.nextlvlinnovation.com/575v2

Www.nextlvlinnovation.com/575v2

Hello Lukas, When upgrading to an LED light you do not need side adjustment since the light dispersion is equally split from left to right. Halogen lights need the horizontal adjustment since they produce an angled light on the left side that can interfere with traffic. Most adapters on the market today dont offer horizontal or vertical adjustment.

Yes, this will fit your 2014 Bolt. You can purchase at Www.nextlvlinnovation.com/575v2. Thanks!

Hello, The gap is needed for the vertical adjustment as well as for airflow for the LED. The gap can barely be seen once installed since the bucket is dark in color and blends with the bezel.