5 Best Axial SCX10.3 Base camp Upgrades and Mods

Рет қаралды 22,993

Күн бұрын

Best upgrades and mods for the Axial Basecamp SCX10 III to see if brass, forward battery placement, brushless motor and best tire options for this rc crawler. Links below:
1. Small Tattu 3s battery - bit.ly/3b1tifS
3s Lipo batteries on Amain - bit.ly/3u20zOT
2. Hobbywing Fusion Pro motor -
Motors on Amain - bit.ly/3b1uK1Z
3. Proline Hyrax Tires - bit.ly/3zOzX7k
Proline Dual Stage Foams -
Beadlock wheels - bit.ly/3NX7MHN
4. Servos on Amain - bit.ly/39vWdsa
5. Brass portal covers - bit.ly/3zGrx1S

Пікірлер: 65

@mxsty8829 Жыл бұрын

I just ordered a blue Basecamp last night, so excited for it to arrive, I believe this is axials answer to the trx4 sport

@americanbigfoot7881 2 жыл бұрын

Awesome video brother! I always enjoy your content and I love my basecamp it is VERY impressive, worth every penny

@RCReviewChannel 2 жыл бұрын

It really is!

@ConditionZero76 2 жыл бұрын

Very detailed & valuable information Frances, you kill it every time Brother, keep it up!!

@RCReviewChannel 2 жыл бұрын

Thank you. I get lucky sometimes

@ConditionZero76 2 жыл бұрын

@@RCReviewChannel lol every time I guess ha ha

@fishnrc294 2 жыл бұрын

Nice killer upgrades. Thanks for the suggestions

@RCReviewChannel 2 жыл бұрын

Thank you. It really woke up this platform

@michaeldorich4485 2 жыл бұрын

You've done another excellent video.Thank you.

@RCReviewChannel 2 жыл бұрын

So nice of you. Much appreciated.

@jessesmith6663 Жыл бұрын

I actually fixed the steering issue on my wife’s stock basecamp. Moved the servo horn over one tooth and shortened the steering link and hits the stops both directions.

@coxyjmz 5 ай бұрын

Did this effect going straight? I’ve done this adjusted the end points now I can’t get it to go in a straight line. Is there a way to set the start point

@NANNIRC 2 жыл бұрын

Always a good video. You teach a lot and thank you.Ciao Nanni

@RCReviewChannel 2 жыл бұрын

Thank you too!

@jerryvolpini7987 2 жыл бұрын

Grest info, thanks! 👍 You have to believe that, at some point, Axial will release a Builder's Kit version of this platform 🤞

@RCReviewChannel 2 жыл бұрын

Can't wait! I bet it's coming

@GARYU-S44 2 жыл бұрын

Good upgrade video, helpful, my friend👍🎶🤝

@RCReviewChannel 2 жыл бұрын

Thanks for the visit

@Trophy_RC 2 жыл бұрын

Cool! 🔥🔥🔥

@RCReviewChannel 2 жыл бұрын

thank you.

@Rockies007 2 жыл бұрын

Great vid, any chance you can put a video together for the best updates to a Traxxas Slash.

@ss454chevelle1970 2 жыл бұрын

Are you going to get back to the Double E land rover with light fix and steering updates ?

@tim101simons Жыл бұрын

Im looking for some foam for the tyres but the proline xl ones say they don't fir these tyres only the taller tyres

@Jamma21 Жыл бұрын

Can this chasis be modded to fit the Killerbody LC70 body? Thanks for the great vids!

@RCinOC Жыл бұрын

How do you program the fusion pro motor to 7.4 volts? Thanks…

@petebrand6661 3 ай бұрын

hello, I have just bought an Axial SCX10 III basecamp builders kit and am looking for good recommendation for servos, ESC, outrunner motor, and r/c equipment and any decent reviews you may have

@michaelchoate2810 11 ай бұрын

The guys over at rc pirates made a steering arm for this that works great

@vivalarevolution1652 2 жыл бұрын

I'm gunna have to disagree with you on the steering servo, it's a pretty decent servo out of the box (not to say it can't be improved.) Instead I would suggest some High Clearance links on the rear. Mine used to get snagged up on rocks all the time after changing them out. That almost never happens anymore.

@tim101simons Жыл бұрын

what wheels and wheel weights are they?

@rc-daily Жыл бұрын

direct power servos are the future! I won't hardly look at a servo that's not direct power....

@nolansmith571 2 жыл бұрын

I just got one of these, only mod are wheels with brass rings and proline trenchers, then a 1080 and a holmes trailmaster 550 21t. I'm looking at brass portals, covers front and rear and then diff covers. Worth it or just do portal covers? Or maybe portals and covers?

@RCReviewChannel 2 жыл бұрын

Covers is always the best since they can add much weight and they're lower to the ground

@bp8__163 2 жыл бұрын

I love my dual stage foams, but notice they slip after a crawl session. Any way of stopping them from sliding besides glue? Great video as always.

@RCReviewChannel 2 жыл бұрын

Interesting point. So they're not centered between the two layers? maybe a thin dual-sided tape between the two layers will solve it.

@bp8__163 2 жыл бұрын

@@RCReviewChannel I think it’s the inner closed cell foam that slides on my boom racing bead lock. it’s because the boom racing wheel doesn’t have the indent to hold the foam that the proline wheel has. i’m trying to find a way to get them to not slip because i love the way they perform!

@rc-daily Жыл бұрын

@@bp8__163 I stretch double sided tape around the beadlock ring... it's the only thing I've found that works out ok.... I thought about hot glue but I want to be able to take stuff back apart..

@duvalpirate904 2 жыл бұрын

It would be awesome if you did a budget build of the base camp

@RCReviewChannel 2 жыл бұрын

That is a great idea

@predator50260 2 жыл бұрын

I buy fusion pro 2300kv for my trx4 spor for expedition and i put fusion 1800kv in my scx10n3 base camp for climb

@coxyjmz 5 ай бұрын

I moved the servo arm adjusted the end points but now I can’t get the trim right at all😅

@buysncharge 5 ай бұрын

Stock radio?

@davo1661 2 жыл бұрын

Hi can you tell me the max speed with that motor.

@ConditionZero76 2 жыл бұрын

Im not Francess lol, but it kinda depends on the size of the pinion gear, it's obviously not a racer but I use to have one in the Bigger Axial Gladiator and had no issues whatsoever, plenty wheelspeed and slow crawl to die for, I would of had no problem leaving it in my Gladiator but I got a killer deal on a HH 3300 Puller Pro so I swpped it in the larger Gladiator and now use the fusion in a comp crawler, as far as actual mph I honestly couldnt say never clocked it but it was plenty for what I needed...Best of luck

@RCReviewChannel 2 жыл бұрын

I'll measure soon. I'm using the stock gearing of the Base Camp

@flamingdragon1234 Жыл бұрын

what size wheels are these? 1.9 or 2.2

@northtexasskies7786 6 ай бұрын

1.9

@Ricky84900 2 жыл бұрын

Hi rc review, what bodies can fit the Basecamp please? Thnx

@unatommer 2 жыл бұрын

I thought for mod number 1 you were going to say throw the body in the trash lol

@twoogie6111 2 жыл бұрын

Can you please do a review of the new anti foams by 3 brothers rc vs proline dual stage. They seem cool and very modular because of the inserts but I’m hesitant to buy them over the prolines foams. Please and thank you!

@RCReviewChannel 2 жыл бұрын

Will work on it. I wonder though which 3 brothers ones will match up

@V8chump 2 жыл бұрын

@@RCReviewChannel I think you’d be best going for the standard “soft anti foams” then using the included tuning rods to make the rear a harder dual stage and the front a lesser dual stage. It’d be an awesome test

@Wainfleetrccrawlers Жыл бұрын

For the steering why not just adjust the end points that way you don't have to mess with the steering horn.

@northtexasskies7786 6 ай бұрын

Not adjustable with stock electronics.

@nismotuningrocks 2 жыл бұрын

I generally agree with your list, but you really should include an axle side panhard mount brace (gspeed, bowhouse, etc.) That mount breaks with ease and can easily ruin your fun in as little as 10 mins of driving.

@RCReviewChannel 2 жыл бұрын

This base camp looks like it has a strengthened panhard. Have not seen broken ones on this version