5 Easy Motorcycle Modifications

Рет қаралды 25,805

Күн бұрын

#1
Quad Lock Phone Mount: amzn.to/3Md5lzG
Quad Lock Vibration Dampener: amzn.to/3JTShgO
Quad Lock Phone Case: amzn.to/3rzakCF
#2
Rizoma Bar End Mirror: www.revzilla.com/motorcycle/r...
#3
Evotech Frame Sliders: amzn.to/3M7VIC8
Evotech Front Axle Sliders: www.motomachines.com/evotech-...
Evotech Rear Axle Sliders: www.motomachines.com/evotech-...
#4
3M Vinyl Wrap: amzn.to/3JTSEIe
Wrap Tools: amzn.to/3rzBycx
Heat Gun: amzn.to/3OtEHo6
#4.5
Custom Chin Mount for Action Camera: chinmounts.com/
#5
Side Stand Enlarger: www.motomachines.com/hepco-be...

Пікірлер: 63

@halohalohikers3571 2 жыл бұрын

What mods would you add to the list?

@jeremykydd2149 Ай бұрын

Hi from New Zealand 🇳🇿 Better late than never lol Triumph Trident 660

@frederickhazelton9448 Жыл бұрын

Just a shout out to say thanks for sharing this video. I successfully installed my Evotech Sliders on my Trident this afternoon. The tape to hold the nut onto the socket really helps, I used the longest 3/8 drive extension and a swivel joint.

@jcvelez 2 жыл бұрын

660 Spain! Great job with that vinyl wrap. Thanks for the advice on the heating gun!

@alexg160 2 жыл бұрын

660 USA! Love the vinyl wrap! Might try that to change the white on my 660

@jivan093 2 жыл бұрын

660 USA! Great content! Can't wait for the exhaust install!

@rjsalameh 2 жыл бұрын

Great video! that wrap looks sharp!!!

@halohalohikers3571 2 жыл бұрын

Thanks!

@itsnotmark Жыл бұрын

Dude thanks for sharing ❤

@jaderegadio9498 Жыл бұрын

660 CANADA. Great job on the installs

@mathewcross4799 21 күн бұрын

Love the bar end mirrors. I cant seem to find the same ones

@aaronberghuis2839 2 жыл бұрын

660 Australia. Great job like your mods

@didac290 Жыл бұрын

660 spain. Great vid!!

@jaco80 2 ай бұрын

For the quadlock better the rear mirror mount

@Gravilohi 2 жыл бұрын

660 Finland I really like this green!

@alejandrotebar5289 Жыл бұрын

660 Madrid, Spain. Great modifications!

@nhsplayer07 Жыл бұрын

How do you like the trident? It’s been on my list

@ukaszKokoszkiewicz Жыл бұрын

You probably should use torque wrench when mounting engine sliders :)

@RevBomb600 Жыл бұрын

5 mods under $100. Literally only the bonus mod is under $100

@TheOllycj Жыл бұрын

What about the wrap, thats cheap well under $100, prob even under $50. Quadlock mount, under $100. Side stand enlarger under $100…..

@ThePukdiddi Жыл бұрын

Hey, nice video, great mods. How did you disassemble the back end for wrapping? You have some footage or manual for that?

@halohalohikers3571 Жыл бұрын

It was really easy. Just pop the seat off, and there are two screws near the taillight.

@james-iw8ky 8 ай бұрын

660 Northern Ireland, Fantastic video, very informative sure got plenty of ideas for my Orange baby

@halohalohikers3571 8 ай бұрын

Awesome glad to hear it was helpful! Have a good one.

@daver4972 Жыл бұрын

Hi. I see from a later video that you've also blacked out the footpeg assemblies, is that more wrap & paint or have I missed an accessory somewhere?

@halohalohikers3571 Жыл бұрын

I powder coated at home and baked in oven. It’s easy enough to disassemble and reassemble the rear set.

@OldSkoolBiker62 Жыл бұрын

I just want to remove the red decor on the front fender (Mudguard) did the red graphic come away easily? Only have a hair dryer lol.. I'm buying a Trident In about 4 weeks time as a second bike to my Triumph Speedmaster 1200cc 2022. Really enjoying your videos on the Trident.. subscribed a couple of weeks ago. 🏍....... 🤟😎 🇬🇧

@halohalohikers3571 Жыл бұрын

I used a heat gun and a bunch of adhesive remover and it was a complete PITA. I ended up wrapping over it so you can’t tell how bad it looks. To be honest I would just leave it or buy new fenders in the color you want.

@cjlaw665 Жыл бұрын

what screws did you use to plug the stock mirror mounting points?

@halohalohikers3571 Жыл бұрын

Found on Amazon

@tolgacakir1991 2 жыл бұрын

660 Germany

@trefster 2 жыл бұрын

I tried wrapping the radiator trim, and the holes for the screws defeated me several times. I gave up. How did you stretch it into the screw holes without tearing?

@halohalohikers3571 2 жыл бұрын

That was the hardest part! (Also the part that shows some red if you look close because mine teared also). It’s doable though I just saw someone on Facebook with a carbon fiber wrap on the radiator that had perfect holes. 👍🏽

@samrichardson9785 2 жыл бұрын

660 united states, btw love my trident.

@halohalohikers3571 2 жыл бұрын

Congratulations Sam, please send me your mailing address via email at: halohalohikers@gmail.com

@JeffGillis1 2 жыл бұрын

How much would it cost to addd a ABS kill switch?

@halohalohikers3571 2 жыл бұрын

Hey Jeff, to be honest I have never researched this for myself. I am able to disable ABS electronically on my Trident. Just curious, do you want it off for wheelies or off roading? Your skills sound like they are at a higher level than mine!

@markong4457 2 жыл бұрын

660 USA!

@josaunders2800 Жыл бұрын

660 Great Britain

@palitoization 2 жыл бұрын

660 Philippines

@michaelmclarney1994 2 жыл бұрын

660 UK

@marparts 2 жыл бұрын

660 Estonia

@southgrad 2 жыл бұрын

660 us

@theBOKfilms 2 жыл бұрын

660 USA

@thedukiemonster2749 2 жыл бұрын

660 USA 🇺🇸

@palitoization 2 жыл бұрын

660

@tavaresdds1 9 ай бұрын

660 Brazil

@ofirbakal Жыл бұрын

660 Israel

@motohakeem 2 жыл бұрын

660 France

@ryanmac08 2 жыл бұрын

660 United States!

@dhawalnag 2 жыл бұрын

660 INDIA 😀

@jonaslippert6963 Жыл бұрын

660 Munich, Germany

@fredrikhellstrom596 2 жыл бұрын

660 Sweden

@kiwiroosterblog 2 жыл бұрын

660 United States

@rommelbabadillia6778 Жыл бұрын

660 Filipinas

@vintrillaquism Жыл бұрын

5 easy mods for just under 1000.00

@htchd1htchd149 2 жыл бұрын

Aircraft steel?wtf aircraft grade aluminum is what u was the wording you was lookin for lmao jesus

@halohalohikers3571 2 жыл бұрын

Yea it’s aircraft grade aluminum! I must have had marbles in my mouth lol

@pocketlint82 Жыл бұрын

There are alot of alloys of both aluminum and steel used in aircraft. And often times the steels are used because they are stronger than aluminum. But saying aircraft grade aluminum is funny since that could mean a ton of things including 6061 and 7075 which is also used for bicycles. Often times when companies say aircraft grade, it is also bicycle grade lol. Means basically nothing. I'd rather know what the actual alloy is

@beejay5837 Жыл бұрын

@@pocketlint82🤓🤓🤓