Thank you I appreciate it. 😁🤘

Thanks!

Hey thanks! Glad I could help.

Nice yeah it seemed like it wanted to land but I had only previously used BF 4.3 GPS rescue and it was pretty good but not at landing and not as smooth in the turns. Im very excited to test the new 4.4 but unfortunately winter has reared its ugly head here so lots of snow and rain for a while. as soon as I can though ill post my results. hopefully some failed attempts for humor 😂👍.

Thank you! Good luck with the build🤘.

Thank you! I appreciate it. 🤘

Hey I appreciate that. 😁👍

Bro, tell me something, wich goggles can be used with this vtx? ​@@andrewmedia3568

Thanks!

😅 Hey you can never have too many quads.

Thnak you!

Thank you!

Thanks!

Thanks I appreciate it. The goggles X are looking pretty rad, the goggles dont natively record osd elements to the DVR so I went on GitHub and found a free software/app that allows you to drop the DVR footage in and then the text file the goggles also record, text file being the osd elements. And then you can choose whatever osd font you wanna use, drop all that in and render it out giving you full osd on your goggle DVR footage like you saw in my video. The app/software is called Walksnail OSD Tool. Its free to download from github.

@@andrewmedia3568 Thank you! I'll have to check it out as soon as I get my goggles in. It's funny that the one thing it doesn't do is what annoys me most about the DJI Goggles Integra. The OSD elements record on there and I cannot remove it when I fly with the Caddx Vista builds I have. So I have no clean video with my Flylens85 which I love flying. Really good drone!

Thank you!

Thanks I appreciate it!

Ok that explains the changes. Did not even think about that thanks!

good to know, didn't know why it did that but I did notice that it corrects itself when you arm. Coming from the DJI Avata I think it can make you think something is very wrong. Had an issue with my Avata and had to run a calibration to fix it so it was scary to see a similar issue on a built quad.

That really depends on your budget. Cheapest HD goggles for the walksnail system are 279$ for the FatShark Recon HD. If you want to use DJI their cheapest goggles for HD are 349$ for the Goggles integra. If thats too much Analog is still a great option and you can pick up some analog goggles for 70-100$ the EV800D or betafpv VR03, emax transporter 2 analog. check out pyrodrone, racedayquads and getfpv. they all have a great selection and prices. And the VTX for analog is much cheaper as well.

@@andrewmedia3568 THANK you sooo much bro i bought the dji ones

Thanks! The props are HQ j37 5” props.

Yes I use the Supafly 5" freestyle Preset for just the PIDS and I set all the rest up for my liking.

Thanks! I was using a 1500 mAh 4s lipo.

Yes I noticed that as well, figured the longer arms always go in the rear and the holes only lined up with long arms in the rear. 🤷‍♂

Yeah I’ll give an update soon. I’ve got a lot of videos to make now that the weather is starting to get better.

Thanks! The Frame is the Speedybee Master 5 V2. Parts list and price in description.

I don't think the compass allows it to hover on its own. you would have to set that up manually specific to the weight of the drone or use inav or something.

I dont think so. The wires are pretty stuck down and stable. I also believe the Gyro is on top of the FC and the wires are on the bottom. But I suppose it still could be an issue. Ill check it out thanks.

Yes the instructions are wrong the longer arms always go in the rear because they sweep back. I have the longer in the rear short up front and it all fits flush. 👍

Thanks I’m using your video to build my SpeedyBee master 5 V2 5” frame I’m also mounting a walksnail avatar Pro kit. I have FatShark HDO2 google so I’m using the avatar VRX. system. I’m putting in a SpeedyBee F405 V4 Stack - F4 V4 FC + 55A BLHeli_S ESC - 30x30 this is my 1st HD quad can’t wait to try it out. Thanks again for your response.

Just some allen keys and small sockets will work.

@@andrewmedia3568 what type if allen keys work??

Esc doesn’t matter directionally as much. The FC is 180 out, easy to change and confirm using the configuration tab and setup tab that shows the quad in real time moving while plugged in. And the motor tab just go through with the motor orientation and rotation wizard to tell BF which motor is where and what direction it is supposed to spin.

not sure I understand the question. You bind the goggles to your VTX and thats how you get the video in your goggles to fly. As for getting the recording from the goggles, you have to hit the record button on the goggles and have it setup to recored in the goggles in the menu options. And you have to have an SD card in the goggles.

Definitely heat shrink would work well. 👍

Yeah most elrs rx come with short antennas I just look for any 2.4g antenna like tbs tracer is 2.4. Anything that’s 90mm or more in length that why one can be short and the longer one can extend to the front or rear. Check pyrodrone, racedayquads and getfpv. One of them should have some long 2.4g antennas .

Yeah sorry the Build videos already take so long to make and edit. And I wasn't sure people would watch that portion or it would be too long of a video. Joshua Bardwell has tons of videos on beta flight and quad setups. Maybe ill do a beta flight set up on my next build video.

Joshua Bardwell is the man for that video. Give him a look.

Not sure I understand you question. Are you asking how I recorded the goggle video?

You buy a video transmitter that works with your goggles, same with analog, with digital you bind your "whatever brand" goggles to your" whatever brand" video transmitter

Yes you can since the pin out is the same. You can use any fc to esc cable as long as the plugs work. The only time you would have to worry about it is if you bought the fc and esc separately then you would have to re pin the plug most likely.

@@andrewmedia3568 I saw on another comment that these motors are not capable Of 6s, (This is my first build) I have a 6s but when i plug it in the capacitor heats up and glows and motors are jumpy and not acting right. Would this be cause by the 6s battery? I should swap to a 4s?

@@andrewmedia3568 I was able to fix my issues with the Heat and motors not working. I changed the motor output. But everytime i go to fly it just flips. I cant get it to work correctly or lift. I did not have a long Esc to FC cable (Ordered Today) so my FC is facing the same way as the Esc, Could this be why it just flips?

@@gameplayhost That could be why. plug your quad into betaflight and check the setup tab look at the 3D model on screen and make sure your quad is tilting the same way as the model. tilt your quad front and back left and right and make sure its the same. If its not you can go to the configuration tab and change board and sensor alignment. the other thing that will cause that is the motor direction on the motors tab. make sure that when you arm the quad your motors are spinning the same way that it shows in the upper left of the motors tab. If its props in or props out you can just change it on the motors tab to match what your motors are doing.

The props are HQ j37, I’m not sure what you mean by caps. Any smoke stopper will do fine. I order most my parts from pyrodrone, racedayquads and getfpv. Sometimes rotorriot if the other 3 don’t have what I need. This quad is 4s. If your goggles don’t have any antennas on them yes you need antennas.

​@@andrewmedia3568 Could you share a link for the antennas you have as there are many and I am confused also could you share a link for the vtx as I have selected one but am not sure if it is the right one

​​@@andrewmedia3568And by caps I mean the bolts you have attached on the top of the props

@@dhvanilshah1286 www.getfpv.com/walksnail-avatar-hd-kit-v2-32gb-w-gyro.html?DM+-+NB+-+PMax+-+Shop+-+SM+-+ALL+%7C+Full+Funnel&campaign_id=17881616054&network=x&device=m&gc_id=17881616054&gad_source=1&gbraid=0AAAAAD8cN5K5vn6oPBloCI1sqxscpEpl1&gclid=Cj0KCQjw0MexBhD3ARIsAEI3WHJFoN7opAMnmqUNwQzCxeShthtakrLWq39PMK3oFHxIgUDzAPjGi5IaAhRKEALw_wcB

@@dhvanilshah1286 www.getfpv.com/truerc-singularity-5-8ghz-stubby-for-dji-lhcp-4pcs.html?DM+-+NB+-+PMax+-+Shop+-+SM+-+ALL+%7C+Full+Funnel&campaign_id=17881616054&network=x&device=m&gc_id=17881616054&gad_source=1&gbraid=0AAAAAD8cN5K5vn6oPBloCI1sqxscpEpl1&gclid=Cj0KCQjw0MexBhD3ARIsAEI3WHIgyt2sJy6NUwaLSz3CAwt_Yo0jNwJT9v6KbUZSJS0KMXKjXkh0IyEaAtBgEALw_wcB

I just flip the switch off. I think if you have an actual failsafe once you get re link you have to move the sticks at least 30% to get control back, but with just using gps rescue on a switch you don’t. Make sure BF is set to sanity checks : failsafe only.

the plug is slightly different. DJI plug is 6 pin plug and the walksnail is only 4. You could get a 6 pin and 4 pin and solder them together which I've done. But its easier to just solder the wires on the FC.

@media3568Thank you kindly for your answer dear sir.You just got another subscriber .

Im running Supafly 5" freestyle preset pids. still dont know what caused the flips, but havent had any other issues since. seems to be fine. 🤷‍♂

@@andrewmedia3568 Maybe the quad calibrate itself for a second 😅How you like the drone in gerneral? I'm in between this or the Mark 5, and it's not easy to choose 😄

@@emilpers1078 Thats a hard one the mark 5 is a solid quad, I haven't had as much time as id like to fly this drone yet but so far it seems really good.

Props I use are the HQ prop J37. All my batteries are from amazon, I use ovonic, GnB, Tattu, ZEE. For a 5" quad 1300-1550 mAh is perfect.

Yes if the plugs match and the pinout matches. But sometimes it’s better to get power from a bat pad so when your flying li-ion packs that drop under 3v per cell you don’t lose video. Ask me how I know 😂.

@@andrewmedia3568 Thank you so so mutch for your answer.I have my great fight to program my googles (hd zero )and walksnail vrx.First drone done almost .

yeah I like 4s. Its cheaper smaller and lighter wieght. I started with 4s so now I have soo many 4s packs it just makes sense to stick with it. I have a couple 6s packs for my long range 7" quad but thats it.

Radio master boxer (ELRS version) and the fatshark dominator hd.

@@andrewmedia3568 also i want this to be my first like kinda "budget" build are there any budget controllers and goggles u could recommend for this build (i haven't really gotten into fpv yet)

⁠​⁠@@doomboy5911 For budget radio I’d say Radiomaster pocket(elrs version).before anything I would watch a bunch of KZfaq videos on every topic, motors, batteries, frames, flight controllers, esc, receivers, radios, goggles, video systems. And beta flight tutorials. I did weeks if not months of research before buying. That being said stick with expresslrs (ELRS) for radio systems. It’s the most prevalent and hands down the best RF system. For goggles you might be able to still pick up a pair of fatshark dominator HD for about 380$. Or the fatshark HD box goggles. If you want HD I much prefer DJI but they are more expensive, but worth it. Don’t forget about the used market for gear.

@@andrewmedia3568 ok imma look into it thanks for answering ❤️

Laziness I guess. I just dont care to use those. Its easier for me to just put the xt60 leads on then solder the capacitor after. 🤷‍♂

I agree 100% plus the fact that you can get a better solder joint on the pad when tinning if you cover the holes. I like the way you installed the cap. that's how I'm doing it from here on. Thanks for a good build vid.@@andrewmedia3568

I think the v2 has only 1 version. And that’s no props in view.

V2 version have 2 models......1 is mentioned as V2 and other one is mentioned as HD PRO kit. U have used the simple HD V2 model. HD PRO kit just have enhanced night time visibility......no other difference. @@andrewmedia3568

Do you not have betaflight osd in your goggles when connected to your quad?

Fat shark Dominator HD.

Yes that would work great. 👍

I’d say any 5” quad you should run 1300-1800 mah. Maybe bigger depending on what type of flying you’re doing.

@@andrewmedia3568 OK thank you

soaks up the initial voltage spike when you first plug your battery in so nothing blows up. And during flight it soaks up voltage and cleans up electrical noise.

@@andrewmedia3568isn’t the xt60 on backwards?? Goes in the back on the drone. Unless you have the camera in the back 😂😂 good video though.

@@jortega61924 you can put the xt60 wherever you want, out the front, side or the back. It just fit well in the front and won’t get chopped by the props. I don’t think you could mount the camera in the back. It’s just 2 standoffs back there no camera plates. 🤷‍♂️

Definitely, that would work well. 👍

@@andrewmedia3568 Thanks

@@andrewmedia3568 I have ultimately decided to use the Velox motors so could you share the links for the props you have used as well as their caps and the smoke stopper.

@@andrewmedia3568 What type of battery have you used and is the motor you have selected the best one for the same build or you would suggest me to get a different one

@@andrewmedia3568 ALSO COULD YOU TELL ME IF I NEEDED ANY ANTENNAS WITH THE SAME GOGGLES.

If you fly slow and cruise, 5-7 minutes. If you fly hard freestyle 3-5 minutes. And it depends on the size of the battery. Could be longer or shorter depending on mAh.

@@andrewmedia3568 What is the best option for freestyle drone, 5 or 7 inches frame, cuz i want it to fly 7-10 min?

@@MrTyron for freestyle definitely 5”. But typical flight time for freestyle is 3-5 minutes. Sounds like not much time but just buy a couple battery’s and you’ll have plenty of flight time. Longer flight times is usually for 7” quads and flying a bit slower. It all depends on the build though. 4s vs 6s, drone weight, motor kv. There is a lot that goes into it. Lots of videos on KZfaq though. Just do some research and that will help. I have a few videos building and flying a 7” and lots of 5” videos freestyling. Check out Joshua bardwells channel too.

Because of ND filter. Some people for some reason likes blurry "cinematic" footage so it's done on purpose. I can't understand that but some people like that :D I can assure you that GoPro footage can be crystal clear :D I'm not fan of ND filters.

🤣 Filmed in 4k 30fps with an ND filter. Im a camera nerd so I follow the shutter rules even with gopro 30fps shutter 1/60 with ND filter to fix exposure. To me gopro footage that auto changes shutter speed and doesn't have natural motion blur looks like a noob who bought there first camera, but its all personal preference. 🤷‍♂

@@andrewmedia3568Yeah :) After two years in the FPV hobby I learned that ND filter vs no ND filter war is like spaces vs tabs for indentation in programming. War that nobody wins :D

@@rfly-fpv I always manually expose for any "release", of course. I use ND filters, too, but they're a pain.... I think that my problem with the gopro is just it's age. Like I said, I'd been researching the lastest action cams before I got that Ace Pro. All the three new ones Gopro12, Dji A4 and the Ace Pro are a significant jump in picture quality over generations from the GP9 era....and I was used to seeing that.

Yeah I still dont know what happened. Thankfully there isn't really anyone there, Thats why I chose that place for a test flight.

@@andrewmedia3568 Could've been a little de-sync and then caught itself. I'd have a look at your blheli setting - demag comp = High.

@@mlentsch Isn't it really unusual for a quad to auto-recover from a de-sync? The normal fix seems to be a quick disarm/arm (if you have the altitude to pull it off!). Do quads recover from desyncs? (I'm not saying they don't I have just never heard of that without a disarm and re-arm. I guess it could be a quick desync that corrected itself before the FC went into runaway?

@@clifffield1 I guess that they can, nowadays... In the old days, you'd be going down for sure, but the processing power of the newer escs can make them recover. It's never happened to me, but I've seen examples of this on UAV tech.

Cheers!@@mlentsch

Yes it continued for a while and I tried all the normal stuff to fix it. I think it was motor desync. I ended up swapping the stack and motors .

@andrewmedia3568 I had it on my DIATONE f5 when I upgraded to 4.3 from 4.4.0 which was perfect, I changed demag compensation to high, and ramp up power to 30 and auto timing, 24k low, 96k high, and it's fine since, was always back no 1 motor

@@rcaddict9558dang, yeah I’m not super familiar with esc configuration, but I did set demag to high changed start up or ramp up power. Then flashed bluejay and re configured esc again changing settings, pwm frequency. Nothing seemed to help. I just got tired of the quad randomly falling out of the air and gave in. 😂

Controller is the Radiomaster Boxer and goggles are the fatshark dominator HD.

​@@andrewmedia3568 Great video! What is the difference between the fatshark dominator HD and the avatar goggles X? Are the fatshark dominator HD just an older version?

@@arthurgarzon200 yes the dominator HD is the version 1 goggles. Both have 1080p display. And from what I’ve seen the goggles x has some issues. My v1 have been perfect so far. And they are much cheaper. They still work with all the newest a avatar vtx.

@@andrewmedia3568 can i use the rm tx16s?

@@qevility310 yes as long as the radio protocol matches your drones receiver. So crossfire with crossfire or elrs with elrs receiver.

Its digital. Using the Walksnail system.

Controller is the Radiomaster Boxer running ELRS. And goggles are the Fatshark Dominators.

@@andrewmedia3568 Thanks a lot! would it be possible to link the Walksnail Avatar HD Micro Camera & VTX Kit V2 32GB with Gyroflow. ? preferably on getfpv

@@MadhAviation www.getfpv.com/fpv/hd-fpv/walksnail-fat-shark-digital-hd-fpv-system/walksnail-avatar-hd-kit-v2-32gb-w-gyro.html

@@andrewmedia3568 Thanks so much one last thing how do you power your goggles, is it also with a lipo or is it with something else, im kinda new to fpv

@@MadhAviation The goggles will come with a power cord and this battery will work. www.amazon.com/TATTU-2500mAh-Fatshark-Goggles-Indicator/dp/B06XNNSS65/ref=sxin_16_pa_sp_search_thematic_sspa?content-id=amzn1.sym.9e518342-e9c3-43d6-ab27-637d7c295405%3Aamzn1.sym.9e518342-e9c3-43d6-ab27-637d7c295405&crid=OK977KAOQGWR&cv_ct_cx=fpv+goggle+battery&dib=eyJ2IjoiMSJ9.s4qVHaU_Tj-9ENhRQF67kdX_KjTMl-u9zoDzhN0gldTKaJG9FHR68OO_RYpdWebTF8plV84vDbcREARVkOs0mw.58bHRBpikc271PrswRLFc5fe7y13wAPKIbqt7Oj-0is&dib_tag=se&keywords=fpv+goggle+battery&pd_rd_i=B06XNNSS65&pd_rd_r=078fb43d-53e3-44b2-85cd-9cac03499c46&pd_rd_w=cpIUN&pd_rd_wg=y0XTZ&pf_rd_p=9e518342-e9c3-43d6-ab27-637d7c295405&pf_rd_r=ABXDVTE06NDECQ2AZTME&qid=1718556744&s=electronics&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=fpv+goggle+battery+%2Celectronics%2C153&sr=1-1-364cf978-ce2a-480a-9bb0-bdb96faa0f61-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1

Invincible - slowed and reverbed by ORKAS

thanks @@andrewmedia3568

Great build btw im just about o start building my first quad@@andrewmedia3568

Great build btw I'm just about to start building my first quad@@andrewmedia3568

This frame is the master 5 HD V2. Ive never used the Mario 5. don't know much about that frame.

🤣 🤣 Sowwy I didnt follow the rules. Bahahaha. Yeah people should go watch your video... but you don't have any. I can tell from your comment you either don't have any quads or if you do they are all pre built bind and flys.

Yap yap yapping gums. Geez

The fc and esc can handle 6s no problem, but the motor kv is too high for 6s. You would need 1900-1700kv motors and then it would be 6s ready.

Would you recommend a 6s build for a beginner? Or is it worthwhile to have the 6s build, but just run 4s until comfortable, and then swapping to 6s? Hoping for longer flight time, but wasn't sure how long you get off the 4s batteries.

@@alexscolavino3301 flight time really comes down to drone weight, battery size and how aggressive your flying. I started on 4s and now I have so many 4s packs I just stick with it. I run 6s on my 7" long range drone. But 6s is significantly heavier and more expensive. your going to crash and lose battery's. It gets expensive. My 4s flight time ranges from 3-7 minutes.

Thanks, Andrew. Do you recommend a specific battery charger, and what 4s batteries do you use for this build? I didn't see them in the details for the video.

@@alexscolavino3301 for charger I run the skyrc t200. It’s a dual channel charger with great specs. Check Amazon. Usually about 100-130$ and for batteries for my 5” quads I run 1500mAh from all types of brands tattu funfly, tattu R line, ovonic fpv, zeee, cnhl, gnb. I buy all my packs from Amazon.