5 Pro Tips & Tricks To Get a Quality Edge on any Fixed Angled system

Рет қаралды 20,814

Күн бұрын

THIS IS 5 PRO TIPS AND TRICKS TO GETTING A QUALITY EDGE ON ANY FIXED ANGLED SYSTEM, I ASLO ADD A COUPLE EXTRA TIPS IN THE VIDEO. IN THIS VIDEO I SHOW PRO TIPS ON HOW TO GET THE BEST EDGES ON FIXED ANGLED KNIFE SHARPENING SYSTEMS. SHOWING TIPS ON KNIFE SHARPENING AND HOW TO GET TO A QUALITY EDGE AFTER YOU KNOW THE BASICS.
KNIFE FROM VIDEO
shrsl.com/4451f
NEEVESKNIVES STORE with sharpening supplies
www.amazon.com/shop/neevesknives
FOR AFTERMARKET STONE HOLDER AND STONESHAPSTONE SHARPENING SUPPLIES
bit.ly/3Q4Okfw
GET THE NEW WORKSHARP FOR $250
shrsl.com/42ht0
WORK SHARP STORE
www.worksharptools.com/?rfsn=...
WORK SHARP AMZN
amzn.to/44a5v4z
GUNNY JUICE STROPPING EMULSION
amzn.to/3PeuGOl
GRITOMATIC SHARPENING SUPPLIES
amzn.to/3PhVfCc
JOIN OUR MEMBERSHIP TO LEARN KNIFE
SHARPENING AND MORE
/ @neevesknives
NEEVESKNIVES STORE
www.amazon.com/shop/neevesknives
BLADE HQ
shrsl.com/3qffz
GP KNIVES
shareasale.com/r.cfm?b=631534...
URBAN EDC SUPPLY
urbanedcsupply.com/?rfsn=5911...
SMOKEY MOUNTAIN KNIFE WORKS
www.pntrac.com/t/8-12270-2954...
BLADE OPS STORE
bladeops.com/?aff=26
KNIVES SHIP FREE
shrsl.com/3y136
KATSU KNIVES
katsuknife.com/?sca_ref=28143...
KAVISO
www.kaviso.com/?aff=3
ARTISAN CUTLERY STORE
shrsl.com/41osa
MOJAVE OUTDOORS GEAR (10% OFF)
www.mojaveoutdoorgear.com/
DISCOUNT CODE : Neeves knives
VOSTEED KNIVES
shareasale.com/r.cfm?b=197313...
ORIGINAL GOAT
SAVE 15% USING MY AFFILIATE LINK
originalgoat.com/?ref=NEEVES
OR USE 15% DISCOUNT CODE (NEEVES)
KPL HEAVY AND ORIGINAL
amzn.to/3kmN8DT
KPL MAINTENANCE KIT
amzn.to/37OwKJJ
ALL LINKS AVAILABLE ABOVE ARE AFFILIATE LINKS
ppl CONSIDER VISITNG OUR PATREON!
ON PATREON Every tier will always be eligible for giveaways. We appreciate all of you for watching our content and supporting us!
PATREON LINK: www.patreon.com/user?u=20902236
To donate, contact or just have some good 'ol knife talk with the Neeve's DM us on Instagram @neevesknives
LINK: neevesknives?ig...
OR
Contact us by email at neevesknives@gmail.com
Instagram: Neeves Knives
NeevesKnives Paypal: jrneeve@gmail.com

Пікірлер: 133

@Tatterdsoul Жыл бұрын

This..This..This. Taught with skill. Filmed with skill. Edited with skill..Dialogued with skill. Textbook. This helped me..Fixed N Free. And I love being able to see close in. This. Thanks from the bottom…J. Ya got a quiver full of skill sets. And one leads to another. Cheers

@johnathoncharton1608 7 күн бұрын

Spit on that thang

@natoblake5990 6 ай бұрын

Man if it weren’t for you, i’d still be using pull-throughs on my knives. I’ve gone from chipping my edges to long lasting working edges and mirror polishing. Thank you for these videos. You’re the man, bub!

@NeevesKnives 6 ай бұрын

That is amazing and just made my day 👊 thank you

@natoblake5990 6 ай бұрын

Hey thank you, bub.

@DHawaii Жыл бұрын

Being able to sharpen your knives opens up a whole new level to the knife journey! So much great info! Thank you! 🤙🏽

@DiabloOutdoors 2 ай бұрын

This is an amazing video you've made! You're a "god" and I'm now a "believer" lol and subscribing.

@drjohncanady 11 ай бұрын

Exceptionally helpful video. Thanks for posting it.

@user-hb6su5kp5p Жыл бұрын

Great job. The tips were well explained and articulated.

@gimparoo1962 Жыл бұрын

Always good to watch someone else use a guided system.. helps me remember the little things I tend to take for granted in sharpening. Especially someone like yourself that has many hours doing it. Thanks for the video! Well done. 😊

@toddcarr. 9 ай бұрын

Such a great vid for those getting into sharpening on a fixed angle system and even for those who have been using one for awhile. Always something new to learn about sharpening in general. The aftermarket stone holder is definatly a great investment for any sharpening system if it doesn't come with one already Thanks for the great vid Jerad and keep making sharp things fun and enjoyable

@WvMnts 4 ай бұрын

Thanks for sharing great information

@4NdR3_K Жыл бұрын

Great tips, thank you.

@davegoodridge8352 Жыл бұрын

Great information, Thank you

@jwilliams5256 7 ай бұрын

Excellent, thanks.

@bigdrj2223 Жыл бұрын

Appreciate the info!

@EastCoastMan603 Жыл бұрын

That hogue was so sharp I was skeeved out when you touched the magnification screen. Great job man.

@NeevesKnives Жыл бұрын

Thanks 👍

@rhinosaur. Жыл бұрын

Great video. Thanks!

@Ward_918 Жыл бұрын

Thanks again for great video

@bramrhodesdouglas5861 Жыл бұрын

This guy is the edged tool Jesus. Thank you, Jared.

@Tatterdsoul Жыл бұрын

Well put. Lol

@merkyworks 7 ай бұрын

Well done

@robsinquefield9260 Жыл бұрын

I freehand sharpen and this even helped and explained a lot to me your videos have taken my freehand sharpening to a whole other level thanks a lot!

@TomcatEDC Жыл бұрын

Thank you for the hot tips…😊

@anthonyberardi8904 Жыл бұрын

Love these sharpening videos. Now I know why it’s so easy to round the tip of a knife and how to avoid it, thank you!

@ScottSalvi 6 ай бұрын

Just getting started with a WorkSharp Adjust Elite. Thanks for a good tutorial and detailed explanations!

@MemoriesRR Жыл бұрын

Thank you.

@ibpositivemostly7437 Жыл бұрын

Cool video thanks.

@genedeem5520 Жыл бұрын

Great video

@asherrose6594 Жыл бұрын

Thanks Jerad!!! 👊

@hotheadedjoelhaha Жыл бұрын

Great video!

@BareArms8 Жыл бұрын

That helps so much. The last thing I want to do is mess up knives I’ve spent good money on. Working on cheap knives with easy steels first was also a great tip from you

@asherrose6594 Жыл бұрын

Ever since I got the work sharp OG precision adjust I could get hair whittling edges, and then I got the PRO PA. And it's a big upgrade but any time a cut through printer paper it would go to the side and trail of, so I tried your technique and I'm slicing through paper like butter. Awesome advice.

@philipculiberk9792 Жыл бұрын

Thank you for making this. I have the basic precision adjust system and you answered the problems ive been having very well

@NeevesKnives Жыл бұрын

Great to hear!

@mikereese15 Жыл бұрын

What awesome tips Jerad. Dont even have a fixed angle system but this was very informative.

@tombeyer375 Жыл бұрын

VERY GOOD VIDEO!! Especially the part of when to stop at the tip, to prevent rollover!! NO ONE wants to convert a good poker into a butter knife. Thanks again!

@stevekwait6221 Ай бұрын

Liked this video. Would like to know your recommendations on ceramic plates that you mentioned near the end of this video. Thanks Steve

@landscapingspecialist Жыл бұрын

I’ve noticed all of these things during my current knife sharpening journey. Very very useful. I had a small introduction to this as I have been sharpening mower blades since I was 13. And alot of the fundamentals are shared between the two.

@NeevesKnives Жыл бұрын

I KNOW WHAT YOU MEAN I DID A LOT OF THAT AS WELL. THERES A LOT OF SIMILARITIES, WITH KNIVES ITS MORE PRECISE AND I BIT DIFFERENT SINCE YOUR GOING FOR HIGH LEVELS OF SHARPNESS OVER TOUGHNESS WHCIH LAWN BLADES ARE VERY TOUGH BUT ALSO GET VERY SHARP WHEN DONE RIGHT

@landscapingspecialist Жыл бұрын

@@NeevesKnives yes. MUCH MORE precise. I was mirror polishing. And I did achieve the polish I wanted. But noticed some deeper scratches. Not terrible, just something I noticed. This is because I wasn’t paying attention to my scratch pattern. Appreciate the advice on this brother 💪🏻💪🏻

@NeevesKnives Жыл бұрын

@@landscapingspecialist YES EXACTLY ALSO MAKE SURE YOU SPEND ENOUGH TIME ON THE MEDIUM GRIT STONES TO GET OUT THE COARSE SCRATCHES

@Aa-ron22 20 күн бұрын

Can you sharpen like normal with the ceramic and do the burr removal after? And if I’m using 2 strops 6 micron and 4 micron how many passes do you recommend with each

@ufcfan3940 Жыл бұрын

Dang thanks never sharpened a knife before just got the workstation great tips

@DoubleDetent Жыл бұрын

Thank man, snagged a stone holder with your code

@NeevesKnives Жыл бұрын

awesome you can follow that guy on instagram he can make a lot of stuff or parts for these systems

@RyanDr Жыл бұрын

You should always end your vid’s like this. Don’t know why but it was super satisfying!

@robertdouglas4293 Жыл бұрын

Thanks Jerod, you'd be suprised something as simple as a close up glasses come in handy.

@SkunkPunch73 Жыл бұрын

Top stuff like normal Jerad my man. Have a beautiful day J&K stay safe and healthy both 🫵🏻😘👍🏼

@TheAdequateMedia Жыл бұрын

Gonna have to snag that attachment

@Hexsyn 2 ай бұрын

After a few months of anticipation, I'm getting a worksharp precision adjust for my birthday next week and this is VERY valuable info to know

@NeevesKnives 2 ай бұрын

the professional or precision?

@Hexsyn 2 ай бұрын

@NeevesKnives precision for me. I have done a good bit of freehand for the past 2 years though so I didn't feel the need to go all-in with the pro

@j.hardesty446 Жыл бұрын

Only halfway through the video but I just had to pause to make this comment saying that this is the video I've been needing🔥 already know all the basics but this is great cuz it's focusing on all of mistakes that are most commonly made. Stopping the stone halfway on the tip!!! that is key and will help me tremendously in and of itself, okay going to go watch the rest of the video ✌🏻 thanks for this!!! 🔥🔥

@NeevesKnives Жыл бұрын

Glad I could help

@ScottieG59 Жыл бұрын

Great Tips. BTW, I sometimes lay a small mirror on the table so I can see where the stone is at the tip.

@arrowheadguys7637 Жыл бұрын

Something I wish people talked about more on fixed angle systems is blade positioning in the clamp for different blade shapes. One of my biggest struggles with fixed angles is not having the bevel widen out at the tip on blades with abrupt curves up to the tip (like the Benny's Clip)

@NeevesKnives Жыл бұрын

if the geometry of the blade is that way then its suposed to widen up at tip if its thicker so in many cases its normal

@arrowheadguys7637 Жыл бұрын

@@NeevesKnives I never even thought about that, but now that you mention it it seems obvious. Do you generally suggest centering the length of the blade in the clamp? In this vid it looked like you had it clamped more rearward.

@Antimatter. Жыл бұрын

On a fixed angle system you want the longest part of the edge parallel with the sharpener, You always want the blade supported as tight as possible , I always twist the handle to make sure it’s locked super tight and there is no movement , being in the center is fine or back closer to the pivot it doesn’t really matter as long as your stones clear the clamp and it’s locked tight , you also want to make sure the tip is supported and isn’t flexing so you might want clamp closer to the tip on a very thin knife , some filet knives I support the tip with my finger to keep it from flexing downward when I run the stone or strop over it , Hope this helps 👊🏻

@arrowheadguys7637 Жыл бұрын

@@Antimatter. Thanks!

@futuresonex 5 ай бұрын

Work Sharp released the professional version two freekin' months after I bought a KME! Don't get me wrong. I'm a big fan of the KME. It's a great system. That's why I bought it, but I like the Work Sharp better. (The precision adjustment screw makes it a lot easier to set a precise angle, not to mention that it comes with an digital angle finder.) Two freekin' months! They did the same damn thing when I bought the original Worksharp sharpener. Three weeks later the Ken Onion Edition comes out!

@ia6980 3 ай бұрын

Thanku

@Cid_1 Жыл бұрын

Great video. I gonna pick up that Worksharp Pro PA now that there is a stone holder available. I was considering getting a TSProf but they have not been available here in Scandinavia for almost a year. Gonna need to pick up some slim Venev stones also. It's nice to have a fixed angle system for when you just need to put on a good consistent edge 🙂Thanks for the video.

@NeevesKnives Жыл бұрын

absolutely it is, even i use them regularly and i love freehand

@johnadames8460 Жыл бұрын

Awesome video. I've been looking for something better than my Lansky. Wasn't sure if it was worth the upgrade to a high end sharpener. Maybe now I can really get a perfect edge. Thank you so much.

@NeevesKnives Жыл бұрын

if you have the lansky make sure you get the diamond stones if you dont have them already it will make you experience 10x better

@johnadames8460 Жыл бұрын

@@NeevesKnives Thanks so much. I figured it was better with diamonds. But I was thinking to save up and get a TSPROF Kadet with diamonds.

@Washyourbellybutton Жыл бұрын

Jared the goat

@tyler2260 12 сағат бұрын

What grit ceramic do you use? Also are you worried about carbide fracturing or destabalization when using ceramic as a finishing stone on the high carbide steels?

@addisonp1041 Жыл бұрын

Let’s go!!!

@joedankworth9347 3 ай бұрын

Very informative and some great tips. Great channel

@Mridgwell Жыл бұрын

Excellent video thank you for the information and tips , got any tips for marrying up 2 edges on fixed angle system ? Just got EMP Relative and attempting to sharpen it soon the edge looks a little tricky it's not a tanto but where compound grind meets looks like it will be difficult to marry up the 2 edges

@landscapingspecialist Жыл бұрын

I hadn’t been paying attention to my scratch patterns as closely as I should have. And also proper burr removal. Very useful indeed 💪🏻💪🏻

@NeevesKnives Жыл бұрын

YES DEF PAY ATTENTION TO THOSE ITS SUPER IMPORTANT, AND YOU WILL SEE A MASSIVE DIFFERENCE IN PERFORMANCE AFTER

@landscapingspecialist Жыл бұрын

@@NeevesKnives copy that. Thanks again brother 💪🏻💪🏻

@NeevesKnives Жыл бұрын

BTW WITH THE BURR REMOVAL I TALK ABOUT IT ALL THE TIME ON THE CHANNEL EVEN WITH FREE HAND ITS SO IMPORTANT ON HOW YOUR EDGE WILL COME OUT IF YOUR ON A FIXED ANGLED ITS VERY EASY BUT YOU NEED TO DO LIGHT STROKES EDGE TRAILING WITH YOUR FINISHING STONE OR A CERAMIC, NO PRESSURE,

@NeevesKnives Жыл бұрын

@@landscapingspecialist IF ITS S110 V DONT EVEN TRY TO REMOVE WITH STONE ONLY STROP AFTER ITS FATIGUED

@reddor5532 5 ай бұрын

Excellent video, as a rookie this was extremely helpful. One question, when you talked about using a ceramic stone to remove a burr, did that replace the stropping or do you recommend doing both. Thanks.

@orendz7740 Жыл бұрын

On the KME system to me it looks like they do more “scrubbing” back and forth motion vs sweeping the blade. If you had a KME would you work it this exactly same way

@wayneverrill3348 5 ай бұрын

Great video! How do you feel about a felt cube for removing a burr?

@lightweightmcdonald 11 ай бұрын

Awesome video! 👌 one question you mention a few times no pressure during stroping but when your using your stones how much pressure would you say you apply? I have a few stones now some cut faster than others so trying to find a consistent pressure for reprofiling and sharpening

@Aa-ron22 19 күн бұрын

So you sharpen and get a burr underneath you flip it sharpen the other side the burr goes back to other side would you suggest removing the bur with that same stone or move on to the next stone the. Remove it

@Rime0ne Жыл бұрын

I definitely do some of the "don'ts" you've described in this video. So I definitely appreciate the tips! One question I have tho is that😮 even when using fixed angle sharpeners such as the The Work Sharp Precision Adjust, I find that the blade ends up with little scratches on it. To avoid this I put blue painters tape over the entire blade. Is there something I'm doing wrong cuz taping up a blade every time is annoying AF!

@TannerVarrasse Жыл бұрын

The same thing happens to me. but the answer is simple. you're pulling the stone too far up to where the edge of the end of the stone is hitting the side of the blade. that's why the fixed angle sharpeners usually give you a rubber washer to prevent that from happening. but for me, I don't use the washers because I like to use every inch of the stone, but the tradeoff is that I sometimes get scratches on my blade. to me it's not a big deal because they're knives not art pieces but at the same time I like to try to keep them on best shape for as ling as possible so I try to avoid things like that. as I get better at fixed angle sharpening, I don't have the problem where I scratch the blade because of muscle memory. especially as I became aware of the scratches and how I was scratching my knives.

@dheller777 3 ай бұрын

What about concave blades like are on most of my Bark River fixed blade knives. Do they all need to be hand sharpened??

@martinmdl6879 6 ай бұрын

quite trickey. :)

@loosegoosageify 2 ай бұрын

Hey Jerad, where is the link to that aftermarket 3d printed stone holder?

@michaelmillwood4930 10 ай бұрын

DUH!! Never mind! Don’t ask me how I missed it the first time, but I found it!😅😎

@j.burmester4398 Ай бұрын

Hey there. Nice Video. I can't find the stone holder at the link. Where i can get it? Greetings from germany

@IBEWJW 5 ай бұрын

Brother where did you get that handle and stone set for that Work Sharp I love you videos very informative thanks for putting them out

@NeevesKnives 5 ай бұрын

Go to my most recent videos, in the hapstone link they have stone holder for both the work sharp pro and precision

@thechumpsbeendumped.7797 11 ай бұрын

Other than ascetics is there any point in mirror polishing?

@JohnVentarino-ey5ln 4 ай бұрын

Are you saying when your sharpening one side of the blade with like say 600 grit and you have your Bur then instead of fipping it to other side go to 800 grit and keep sharpening to get the scratch pattern smoother then flip the blade and just do like 5 strokes to remove the Bur.

@Tunnelmath Жыл бұрын

I get a wicked edge, but feel I can improve. I struggle to confidently identify a burr. Even after many passes. I just assume I have rough hands and don't feel it. Seems more difficult with premium steels - Magnacut or maxamet recently.

@andreasjonsson8075 11 ай бұрын

Is it possible to lessen the angle for the bottom of the blade???

@TannerVarrasse Жыл бұрын

how do you feel about wood strops with gunny juice? i tend to like a balsa/bass wood strop better because i find my angle way easier. should i put more pressure then a leather strop?

@landonlyons7951 2 ай бұрын

i notice you mostly sharpen smaller knives. Have you tried any bigger kitchen knives? especially with this work sharp per pro. i have a similar set up and im having trouble with the clamping system not holding strong, it flexes as i get to tip. any suggestions?

@Pzykoh_Tey Жыл бұрын

🙏🙏🙏 Thanks for this 🙏🙏🙏

@michaelmillwood4930 10 ай бұрын

Hey. I’m sorry but I can’t for the life of me find the aftermarket stone holder you’re showing at the beginning of your video. I’ve tried all the links you provided, but can’t seem to find it. I recently bought the new Professional Precision Adjust Work Sharp sharpener (like the one you’re using), but I want to expand its capabilities like you suggest (using more stones). Will you PLEASE, PLEASE either make another video or at least a Short naming and describing the stone holder you’re using??? Thanks SO MUCH and, as always, I REALLY enjoy all your content! Thanks again! ;-}. MM

@michaell397 6 ай бұрын

I very much appreciate your efforts here to show the importance of proper sharpening. particularly the importance of the microscopic teeth. Years ago I tried it vain to explain this over on BF' to no avail. I was told that it was completely wrong. Particularly by one individual who toted himself as an Engineer in Metallurgy. When I did a deep dive on his qualifications turned out he as only a trade school student and not an accredited Metallurgist at all. Yet he was treated there as the god of steel. Virtually every thing he taught there was dead wrong. I won't give his name here as he is now deceased, I still see his name as the guru of knife steels. GRRRRRRR!!! A complete fraud and never made a knife in his life. I finally gave up trying to educate the masses there. Like you I have done extensive testing over the years in the business and have been a maker of fine knives for over 50 year. Hard not to learn a few things in all that time. ;

@roadracerqx893 Жыл бұрын

So, after removing the initial burr FROM TIP TO TAIL, then (without flipping) you go back to passes from TAIL TO TIP while creating the new burr to the other side?

@chrishinkle5982 Жыл бұрын

Thanks for sharing bud!👊🏻I have seen people just go straight up and down I believe it was on a work sharp video is that not good to do even if you make sure to be even with it same amount of strokes?

@NeevesKnives Жыл бұрын

if all the teeth are straight up and down then its fine, kind of like a factory edge done on a belt thats how they are. but you dont want the teeth running all different directions

@chrishinkle5982 Жыл бұрын

@@NeevesKnives thanks still learning on the sharpening side for sure

@DiegoMartinez-ou5wn Жыл бұрын

What’s a good set of after market diamond stones to use with the new adapter?

@NeevesKnives Жыл бұрын

you can find the ones i recommend in the neevesknives store in description just go to sharpening supplies the ones you want would be 1x6

@asherrose6594 Жыл бұрын

Hey Jerad, I have a question. Do you ever oil your knife blades?

@randynordquist6139 2 ай бұрын

Where do you get the stone holder you mentioned

@NeevesKnives 2 ай бұрын

linked in the description, check out the neeveknives store with sharpening supplies

@0zmose Жыл бұрын

Great vid Jared. I've been tempted to pick up the Worksharp Pro. I have the original. It's not bad, but man does it fall short in a lot of ways. Do you think the Pro is worth it, or should I just bite the bullet and buy a T.S. Prof? I've been hand sharpening lately, but it really sucks when you need to re-profile some of the crazy hard steels.

@NeevesKnives Жыл бұрын

i do think the ws pro is worth it for sure its really good but the tsprof is better for sure also more expensive

@GM-cm3qc Жыл бұрын

Let’s get some shipping to Canada please 😅

@abners4780 Жыл бұрын

Do you still offer sharpening services?

@blairowens8912 5 ай бұрын

So i just finished me first try with a worksharp elite. But i didnt spend enough time going through the finer grits once I got that initial burr like you said. Would you recommend going over again or just wait til the knife gets dull. It cuts very well but with the naked eye you can see the pattern isnt even.

@NeevesKnives 5 ай бұрын

Just wait until it gets dull, because if you have the precision elite then it's not going to matter much, the jump from the last diamond to the ceramic is to big there needs to be one or 2 stones more before the ceramic If you want an ultra fine edge, however the ceramic will be a great way to do your burr removal, you can get an aftermarket stone holder in order to get better stones btw

@NeevesKnives 5 ай бұрын

If you have the same system from this video the professional then it's kinda the same thing, another reason i recommend getting the aftermarket stone holder, there's a really good one in my Hapstone link that's in my most recent videos for both systems, it will be back in stock in about a week or 2

@blairowens8912 5 ай бұрын

@NeevesKnives I have the pm2 and I noticed the holder for the worksharp doesn't allow the stone to hit the corner of the hilt/plunge. I'll look into the aftermarket holder just for that reason alone.

@mattnejmanowski631 7 ай бұрын

fixed angle only gets thicker and your knives perform poorer and the sharpening eventually takes longer. then you have to thin it and alot of fixed systems cant do an accute enough angle to thin.

@fabian_99 Жыл бұрын

you can go ever the tip you just have to follow the path of the edge ... dont know if thats a sin but like that at teast the tip doesnt get rounded off... got a pretty good edge like that yesterday on my folder

@NeevesKnives Жыл бұрын

im not sure what you mean if you mean side to side ?

@jeronimo2152 Жыл бұрын

Do you use any compound etc, when running the stones on a Precision work sharp?

@NeevesKnives Жыл бұрын

what do you mean?

@jeronimo2152 Жыл бұрын

@@NeevesKnives do you wet the stones with anything on the work sharp setup

@NeevesKnives Жыл бұрын

@@jeronimo2152 NO BUT I DO HAVE SOME, WHEN I USE WHETSTONES I USUALLY FREEHAND BUT I DO HAVE THE STONES FOR SYSTEMS

@jeronimo2152 Жыл бұрын

@@NeevesKnives could of swore I saw bubbles on a stone in this video... No?

@NeevesKnives Жыл бұрын

@@jeronimo2152 USUALLY WITH SYSTEMS DIAMONDS ARE THE BEST BECAUSE THEY CUT FAST AND WITH SMALLER STONES IT TAKES A LONG TIME IF THE STONES ARE NOT DIAMOND

@DinoNucci Жыл бұрын

😯😯👌👀👀👏👏👍🏻👍🏻

@Cid_1 Жыл бұрын

Don't forget to hit the like button on your way out peeps! 😉

@NeevesKnives Жыл бұрын

thank you

@jeffhicks8428 Жыл бұрын

I cant be bothered with fixed angle systems. Most knife bros extremely over complicate things, and usually don't understand them anyway. Guys who for instance think you need 20 grits to do a knife edge and stuff like that. Guys who start out with something like 50 grit. Just the amount of ignorance youd be fighting against trying to teach knife bros is too much.