5 Quick Tips for Installing Composite Decking by Jon Peters

No video

5 Quick Tips for Installing Composite Decking by Jon Peters

Рет қаралды 1,497,745

6 жыл бұрын

This project is sponsored by ZomeTek Composite Decking - Strong by Nature. Learn more about the xBeam Planks used in this project and the ZomeTek Lite Deck & Patio Tiles at zometek.com/jo...
Subscribe to the Jon Peters Shop Talk: / jonpetersartchannel
Support This Channel On PATREON: / jonpeters
Facebook: / 312021729836
Website: jonpeters.com/
Instagram: / jonpeters_
Apparel Sponosor: Mountain Khakis
www.mountainkha...
/ mountainkhakis
/ mountainkhakis / mountainkhakis
/ mountainkhakis
About Mountain Khakis
Rugged. Authentic. Reliable. Timeless.
What started as a casual conversation at the Shady Lady Saloon in Jackson Hole, WY has become a top-performing mountain-inspired lifestyle apparel brand. Established in 2003, Mountain Khakis quickly became a staple in the wardrobe of everyone from ranch hands to golf pros, those who travel by jet, as well as those who travel by thumb. The Mountain Khakis brand story continues to resonate as it connects to the enthusiast who believes that freedom and rugged adventure is a way of life. Join the conversation @MountainKhakis and MountainKhakis.com
Live Life Untucked, #WorkHardPlayHarder

Пікірлер: 92

@SoulFire209 Жыл бұрын

Having spent all day yesterday installing composite I can definitely say I approve this message!

@gacodon753 3 жыл бұрын

Very happy with this guide

@johnsrabe 2 жыл бұрын

The demo of the special screw was invaluable. Too many of the videos for installing composite decking on KZfaq only show how to use hidden clips. Luckily, I tested a “composite deck screw,” with a bugle head, on a scrap of my composite, and of course it made a big nipple. So I went out and bought a couple boxes of screws that look like the one you used, and they’re working perfectly. Thank you. (Finally, at 56, I test even the screws on scrap wood.)

@stevecollins9450 6 жыл бұрын

Now that looks like the kind of composite decking I've been waiting for. Thanks Jon.

@thomashendricks9774 6 жыл бұрын

I'm going to be redoing my deck later this summer, can't wait to see the full video.

@JonPetersArtChannel 6 жыл бұрын

Thanks Thomas...the full video should be ready in about a week.

@amandabruney3835 6 жыл бұрын

Very informative..thank you Jon. Stay safe

@JonPetersArtChannel 6 жыл бұрын

Thanks Amanda

@JChamberlin 6 жыл бұрын

That decking looks terrific.

@zometekdecking7559 6 жыл бұрын

Excellent tips Jon!

@FernandoKugi 6 жыл бұрын

Cool video, nice tip! I'm looking for these tipe of decking here in Brazil, but it is very expensive...

@jimc4766 5 ай бұрын

short and informative, thx

@jwmachen 6 жыл бұрын

Good looking material and good tips. I wonder if other retailers might start to carry it in Virginia, HD, Lowes, 84 Lumber are all we have here.

@DavidBishopinc 6 жыл бұрын

Looking forward to seeing the deck build.

@WayneBrownWoodworking 6 жыл бұрын

I’m adding a deck off the back left side of my house in a few weeks. Cool info Jon, I look forward to your video. Looks like a great product for our long term needs

@JonPetersArtChannel 6 жыл бұрын

The ZomeTek decking is a really nice product.

@FredMcIntyre 6 жыл бұрын

Great tips Jon, thanks for sharing! 👍👊

@jorgegonzalez5714 6 жыл бұрын

NICE JOB

@JonPetersArtChannel 6 жыл бұрын

Thanks

@TJSWOODWORKINGSHOP 6 жыл бұрын

Hey my brother awesome stuff I like it very nice :)

@JonPetersArtChannel 6 жыл бұрын

Thanks TJ!

@iamyourfuture808 Жыл бұрын

great job

@DIYdiacsnFarmstead 6 жыл бұрын

Why would you want to have a reveal around your Deck? Id want to have a small overhang to prevent Water to get to the Joists...

@brewster102 3 жыл бұрын

I'm asking the same thing

@andrewbrown8148 6 жыл бұрын

Good info, Jon~! I'm looking at replacing our dilapid pressure-treated deck surface with a synthetic and that one looks nice. Haven't heard of Zome Tek yet. Can't wait to see how yours turns out. Thanks~!

@joewildturkey8253 3 жыл бұрын

the UV from the sun is very harsh here in NZ I've seen it play havoc with composite (plastic) decking by bowing the planks, popping the clips and lifting the decking, and shrinking it at the ends exposing large gaps,

@glennryan6655 3 жыл бұрын

You installed the deck up side down the groves are meant to be on the bottom for air flow to stop the joists rotting out

@Soul_N_Control 2 жыл бұрын

😂😂😂

@bradevans8827 2 жыл бұрын

Glad I'm not the only one who picked that up... WTF??

@twodogswoodworkingandwood6742 6 жыл бұрын

Thanks for the tips. I can think of a lot of uses for the screws.

@BruceAUlrich 6 жыл бұрын

Good tips. I would consider using this stuff on a deck that I build. It has a really nice look to it.

@JonPetersArtHome 6 жыл бұрын

Thanks Bruce

@Cradley684 6 жыл бұрын

Really smart Jon !!!

@JonPetersArtChannel 6 жыл бұрын

Thanks Brian!

@benomax6429 3 жыл бұрын

How hot is this composite under the sun ?

@davegilesuk 5 жыл бұрын

Did you encounter any problems with expansion using two different materials - ie. timber and composite decking?

@user-gw7pk2eg1v 2 жыл бұрын

nice job

@1806StoneHouse 6 жыл бұрын

I really want to use this stuff!

@NazimAli-en5cv 5 жыл бұрын

Very good

@NoNonsenseKnowHow 5 жыл бұрын

Great tips and nice looking work. I would personally avoid creating all those rot pockets though. Especially on the "reveal". Excellent video though!

@demetriusbaloyi2605 6 жыл бұрын

Awesome tip as always, thanks Jon.

@IEnjoyCreatingVideos 6 жыл бұрын

Great tips Jon! Thanks for sharing.😎👍JP

@JonPetersArtChannel 6 жыл бұрын

Thanks JP

@IEnjoyCreatingVideos 6 жыл бұрын

You're very welcome Jon! 😎

@acmarceneiro 6 жыл бұрын

Ola,saudaçoes de um fá seu do brasil,esse material é pvc,um abraço.

@mansellmovies Жыл бұрын

Good to know stuff there. Many thanks for your upload. Can I ask, what is that facing board with the edge called that your using ? That looks great

@uknowulikethat4042 6 жыл бұрын

that reveal around the edge looks great, my old fella priced composite decking here in Ireland 18x16 ft, priced at about 1600 euro,

@Ghfthr25 6 жыл бұрын

انا متابع من العراق استمر

@hollewoodfurniture8190 6 жыл бұрын

Hey John, never laid a deck myself but will probably be in the future. Why is it you'd like a reveal around the decking instead of the decking hanging off a 1/4 of an inch? Thanks!

@robertp7209 3 жыл бұрын

The centerlines on the joists look less than 16 inch, what is the requirement?

@brianstirland4585 5 жыл бұрын

like this a lot thanks

@williscooper7750 6 жыл бұрын

That second set of threads isnt designed to "counter sink" the screw. In fact that is bad leaving a spot for water to pool up and during winter month snow and ice will get in and begin to separate the material. (composite decks are not weather proof decks) That second set of threads is to avoid mushrooming of the material if you dont pre drill your holes. its not intended to counter sink the entire head but rather be flush and those threads help pull the material flat.

@SK-or3rs Жыл бұрын

You telling that to the guy who install deck upside down?

@JohnnyRottenest 6 жыл бұрын

Does the zometech warp? Trex is notorious for that.

@juanandresdiazrendon5506 5 жыл бұрын

Greetings friends great work, which brand recommend me to make my deck

@ashishpatel350 6 жыл бұрын

Does anyone know how well composite desking holds up to northeast weather?

@williscooper7750 6 жыл бұрын

most will expand and contract with heat and cold. They are more brittle and susceptible to breaking if installed on a deck that has joists spaced too far apart in colder weather. They will also contract and leave gaps in seams if installed on a very hot day as the material tends to shrink some when its cold but likewise if installed on too cool of a day, you will have the opposite affect on hot days. I recommend checking with local builders as they will likely point you to the best composite for your region. Not all composite deck materials are the same.

@janetehodgson2279 2 жыл бұрын

I try to use your information in our home..

@mryoso22 6 ай бұрын

how long do this kind of deck lasts?

@pinnacleservices6671 6 жыл бұрын

What was the name of the screws?

@MyFoot 6 жыл бұрын

Deckfast Cap-tor seems to be what he is using. Seems amazon has them, but only in the 1750 qt boxes.

@thebonkarsgamer449 Жыл бұрын

Not using DPC lovley

@hythewoodworkdesigns 6 жыл бұрын

Great video Jon & very informative. Unfortunately I haven't seen composite decking here in the UK. What's the lifespan of Zome Tec??

@paulwhitting4953 6 жыл бұрын

It’s readily available, just google composite deck boards.

@hythewoodworkdesigns 6 жыл бұрын

Thanks Paul. I really didn't think we could get it here. Mind you it's really expensive at Wickes & Travis Perkins. I may have to look around for better deals. Thanks again

@chloehoughton9407 4 жыл бұрын

I can’t quite catch watch the screws you used were called?

@SigmaAvenger2 6 жыл бұрын

What's the pricing on the deck boards?

@zolim5429 2 жыл бұрын

Its soo easy în video, but i have now a 80 meter long deck too cover whit this material, than its ooooooo my God

@lillianhowell4630 4 жыл бұрын

.framinhg wood fence with pvc boards

@akhan999 2 ай бұрын

Where’s the video of installation?

@medibbs 4 күн бұрын

why would you use wood for the support for the desk when you could uses a Composite Support Joist for the desk? that won't rot even tested wood rots over time

@MRrwmac 6 жыл бұрын

Jon, even though you probably got free resurfacing materials for your deck out of the sponsored video, I know you wouldn’t endorse a product unless you liked it personally. It seemed an interesting product since I am considering redoing my double layer deck and wrap around stairs. Unfortunately, to get a couple samples they ask for more personal information than my name and physical address (which is all I feel they need). I’ll be looking elsewhere. Thanks anyway Jon.

@agentred8732 4 жыл бұрын

R.I.P. Zometek?

@michaelfinney5317 9 ай бұрын

You aren’t supposed to do butt joints on composite decks?

@zx10rmac84 Жыл бұрын

Thought this be better info

@bunglebro 5 жыл бұрын

You've put the deck the wrong way around! The ridged side on the deck board is just sarcing to stop the wood cupping.... They just put it on mod wood for the look!

@JonPetersArtHome 5 жыл бұрын

Wrong... this decking is double sided you can choose either look

@Dubs2 4 жыл бұрын

I thought the exact same at first. This is a quote from Apollo decking website; "These stair treads are reversible and provide a ridged appearance on one side and a brushed appearance on the other side." I personally prefer the brushed look and I imagine if it rains, the water would just pool inside the grooves making it slippery.

@giovannipetitti1588 6 жыл бұрын

Hi jon,share on facebook 👍

@samuelestepp725 5 жыл бұрын

Don't knock your grill over and catch it on fire it's really hard to put out

@omarvip86 6 жыл бұрын

Like mi 😘

@mattdavis2788 5 жыл бұрын

Why are you installing it up side down. It's more slippery and the grooves allow the air to get under to help stop joists rotting. I think you should go back to school before teaching people the wrong way

@JonPetersArtHome 5 жыл бұрын

apollodecks.com/. Is double sided… Nice comment though.... I added the so you can learn more about it

@jozefestocin3959 3 жыл бұрын

Nekvalitna podlaha neodporučam slnko mraz do 3- rokov možte vyhodiť ja som tak vyhodil 6.000€

@rickracer78 5 жыл бұрын

Here's a quick tip for installing composite decking... DON'T! The stuff looks absolutely terrible after a few months. It fades, any spillages completely stain the surface and can't be removed and it costs way too much in comparison with merbau. Just don't go near it.

@JonPetersArtHome 5 жыл бұрын

This on is still looking good I’ll probably post an update to Instagram this week