5 Shots, One Hole: 6 Dasher Load Development Initial Results
Рет қаралды 152,323
4 жыл бұрынFull Story: bit.ly/2yYupdJ
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Load development has never gone this smootly for me, and in this video I'll show you exactly what I did to achieve amazing results!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Precision Matthews
- BAT Machine
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about
@Ultimatereloader 2 жыл бұрын
Interested in an Ultimate Reloader custom rifle? Sign up on the list here: ultimatereloader.com/rifles/
@208bowmaddnneess Жыл бұрын
To help your targets not get beat up by plywood backing what I’ve learned is to use a piece of cardboard between it and the paper target
@5k6flier91 4 жыл бұрын
Your edits are fantastic. Thanks for the time you spend on the content.
@NielsonRichard 4 жыл бұрын
Happy to see the 6 dasher worked out for you
@winnmahuron6314 4 жыл бұрын
I really like the selection of reloading tools that you used. Thank you so much for making this video. I will donate to your patreon account the end of this week.
@dexter5421 4 жыл бұрын
Wow Gavin! Congrats. I am really looking forward to the next video. Keep the coming thanks.
@duggydo 4 жыл бұрын
Man that’s an awesome shooter! I kinda expected it given the care you put into all aspects of the build and reloading. I’m SUPER stoked to see the long range results. Bravo!
@oddursigurdsson3046 4 жыл бұрын
Great stuff, looking forward to see your next vid. Keep up your great work :)
@dang3 4 жыл бұрын
Gavin I would love to see you do more of these super detailed load work-up videos like this but in other cartridges with various powders and components.
@smoakngun 4 жыл бұрын
I can tell by the sound of the action that it is super smooth. That is one super accurate rifle. Another success and you make it look so easy!
@glennbrown2320 3 жыл бұрын
Awesome job. Love the way you developed your load and the way you explained it
@jaydavis6594 Жыл бұрын
I'm amazed. Great job with the build and load development.
@warrenhumphrey3956 3 жыл бұрын
Amazing 👏 results. The effort gets rewarded!
@karlweiby2307 4 жыл бұрын
Man that is an amazing firearm!! Watching the bolt cycle with that much ease is awesome. And I can only imagine the gratification from getting results like that on something you built yourself. I can’t wait to see your long distance results. Nice work Gavin
@brentstam2351 4 жыл бұрын
Great material. Can't wait till the long range info comes out.
@dandingfelder6763 4 жыл бұрын
Wow. Gavin you made an amazingly accurate rifle and ammo combination. Piet must be chomping for his Dasher to get to him!!!
@Ultimatereloader 4 жыл бұрын
Yes, I know he is!
@duggydo 4 жыл бұрын
I been waiting for this one Gavin! 😁
@Ultimatereloader 4 жыл бұрын
And here it is!!!!
@EagleEyeShooting 4 жыл бұрын
Those are some really outstanding results brother. Always a pleasure to watch and see all the fine minuet details. 👍
@Ultimatereloader 4 жыл бұрын
Good to hear from you Kenny, thanks bro!
@derrickgraham3180 4 жыл бұрын
Eagle Eye Shooting Check this out and reply back with your thoughts.
@derrickgraham3180 4 жыл бұрын
@@Ultimatereloader love to here what you think about this article to Gavin.
@robspath4203 3 жыл бұрын
Those standard deviations are incredible!
@wideopenyamaha 3 жыл бұрын
Great video as usual. Thx. Also interested to see you do 6gt
@DrJPKillYa 4 жыл бұрын
Outstanding results, you must be even more satisfied having done the lathing of your barrel, and picking your components. Congrats!
@conservativesniperhunter7439 4 жыл бұрын
Absolutely awesome rifle build and accuracy Gavin . I can’t wait to see how it shoots at 600 and 1000 yards .
@chuckbest5982 4 жыл бұрын
Extraordinary! I would for one like to see what the groups look like at distance. Thank you for the video.
@a.k.4363 4 жыл бұрын
You are the King of this business!!
@bobpayne6949 10 ай бұрын
outstanding testing!!!!!!!!!!!!!!!
@Leethal1 4 жыл бұрын
Way to stack them in there, Gavin 👍
@fowllab 4 жыл бұрын
Very nice shooting. Rifle looks awesome.
@DVEarley1995 3 жыл бұрын
That is one of the most impressive reloading videos I have ever seen. Congratulations on that load development. WOW!
@Ultimatereloader 3 жыл бұрын
Thanks 👍
@masi16r 4 жыл бұрын
Great stuff! Thanks.
@bennybruin7725 3 жыл бұрын
First I would like to thank you for sharing all of your knowledge with us and secondly that was some great shooting brother
@impavido13 4 жыл бұрын
Production and editing is on point. Loving the content
@Ultimatereloader 4 жыл бұрын
THANK YOU! It's sooooooooooooooooooooooooooooooooooooooooooooo much work, great to have people appreciate the editing!
@impavido13 4 жыл бұрын
gavintoobe learned so much watching do builds, and a scientific approach to the reloading process. Really inspiring man. Would love to do builds like you do
@bm.w1135 4 жыл бұрын
Your 6dasher series couldn’t come at a better time. Got a dasher spinning up right now.
@jp2246 4 жыл бұрын
Impressive results, look forward to your testing at 1000 yards!
@stevep8363 4 жыл бұрын
Nice work! Sure looks like a sweet shooter!
@rocketsurgeon1746 4 жыл бұрын
Great job!
@tonygslc801 4 жыл бұрын
Awesome results Gavin! I'm glad you finally got it dialed in 👍 That rifle is Sweet 😍
@Ultimatereloader 4 жыл бұрын
THANKS!!! I love this rifle.
@GianniG55 4 жыл бұрын
Hi Gavin , some great results there with the Dasher , you’ve done a great job with the rifle build looking forward to more , I also wanted to say and with the upmost respect with the chronoGraph reading time at 21.28min I don’t know if you realised the FPS showed a difference of 22fps and the Standard deviation was 8.1 you can change that setting in the magneto menu to read in FPS or SD , sorry just wanted to point that out but still great results none the less 👍👍
@jaybigboy34 4 жыл бұрын
Great video! I love my dasher. My load is 32.7gr over the 105 berger. Looks like your gun liked that as well with great sd's.
@gw9853 3 жыл бұрын
This is the third time I have watched this video. It still blows my mind. That is a nice gun. It shoots a few loads in that benchrest group range. You nailed this one.
@Ultimatereloader 3 жыл бұрын
Thanks, I love the rifle too! Always enjoy shooting it!
@bradleytyrrell4417 4 жыл бұрын
Nice one mate love watching your videos
@nicb7628 4 жыл бұрын
That is utterly ridiculous. Just the precision of that 6mm is awesome and really appreciate the time, effort, and knowledge conveyed in this video.
@stevensolinko8807 3 жыл бұрын
My gunsmith built me a 6 dasher. Did a "ladder test" and shot near .3 moa group. Impressive cartridge.
@RichardCasto 4 жыл бұрын
Great video. I would love to see follow up with once fired brass and if you find the need to adjust charge weight all. Another thing would be to start tracking throat erosion (borescope images) vs round count and if/when you need to start chasing the lands.
@williamrogers4114 4 жыл бұрын
Ive been looking at 6 dasher for a while and this vid convinced me,,,great vid and shooting.
@planeiron241 4 жыл бұрын
get a good barrel first then dasher..I recommend a brux 4 gr 28 inch or more..with the right freebore and throat angle
@jbradley500 4 жыл бұрын
I just can't wait to see the long range shooting videos. Don't be afraid to do some talking when you're on the range shooting! This series makes me want to spend money.
@wardo17 4 жыл бұрын
I'm such a novice at reloading in that I haven't even purchased everything to reload but I'm reading, studying and watching videos from individual like yourself and all I can say is WOW. What you put into this project is phenomenal. Your results and attention to detail is amazing. Keep bring out these videos. Thank You
@broznkyra4853 4 жыл бұрын
Don't expect to get 'all of your reloading gear' all at once...you accumulate it over time...I bought an RCBS Rockchucker press in 72 from the post Rod & Gun Club in Germany...I started teloading when I got home in"74...took me the next 40 years to accumulate all my 'dtuff'...dies, presses, etc...this hobby is time consuming..you simply have to Love fiddling around with case prep, load development etc...try to find used equipment...most of the stuff is hardly used...guys buy stuff nut lose interest and wives tell them to sell it...get a bunch of reloading manuals and a good balance beam scale...I still have the one I bought in '02...the gold standard...
@joelclark2130 3 жыл бұрын
The biggest and best thing you can do. Is set a goal, stick to it and do not move on until you complete that goal
@DWhite-el4ih Жыл бұрын
What goals are you referring to?
@arleyrisner204 4 жыл бұрын
Your videos are always to the scientific point. I love that. Great info and looks like you built a keeper there. FYI I'm working up a load for 6.5 PRC in a carbon fiber wrapped barrel. Any suggestions are welcome. Thanx
@jerrymont2595 3 жыл бұрын
That Berger 105gr shooting was crazy accurate at a .090 moa. Wow!
@dwightwinters4632 4 жыл бұрын
Phenomenal results with a very measured approach. I look forward to seeing data collected from the 600 and 1000 yard tests. Wonderfully instructive and well done! Carry on! 😀
@Ultimatereloader 4 жыл бұрын
Thank you!
@CplSkiUSMC 4 жыл бұрын
People come up with new concepts in reloading and most of them are worth a try. What you've shown here with the 10 shot ladders seems to have some merit and looks worthwhile.
@josecoyote6079 4 жыл бұрын
My friend you are an scientist on reloading bullets thank you for sharing this excellent video
@Ultimatereloader 4 жыл бұрын
You are too kind, thanks for watching!
@LadCo12 4 жыл бұрын
Gavin I would love to see you do a video on the 6GT round George Gardner came up with. Its supposed to be like the dasher but feed better from the magazine.
@johnpaton8047 3 жыл бұрын
My work buddy just mention the 6GT..It would be great if you could do a vid on that. Appreciate your channel. Saves everyone a heck of lot of time. Greatly appreciated.
@michaelmeyers1827 4 жыл бұрын
You ve got a winner. There isn't t a lot out there that will shoot that good
@Ultimatereloader 4 жыл бұрын
Thanks Michael!
@matthasaname 4 жыл бұрын
Very impressive!
@johnniebennett1009 Жыл бұрын
Great shooting
@johnniecaldwell1130 4 жыл бұрын
Great Start!!!❤️🤍💙
@poofy917 4 жыл бұрын
Great shooting! I've been thinking of getting a magnetospeed. Did you notice a POI shift when it was attached?
@esromvre Жыл бұрын
Well done
@tallyman15 3 жыл бұрын
Good work.
@perrydegouveia5403 4 жыл бұрын
Insane, keep up the great work 💪💪💪 I would be very interested to see the results on a LNL AP running full progressive, case feeder, bullet feeder priming and seating. The amount of ammo we shoot in a season is compared to time behind the bench is crazy. Keep up the great work 💪💪💪
@sylvesterwilliams3869 6 ай бұрын
Wow, great video and a beautiful rifle. I’m building a dasher now and can make good use of this information for load development.
@Ultimatereloader 6 ай бұрын
Thank you! I hope your build goes really well!
@greghandley8015 3 жыл бұрын
Hey Gavin, try shooting without using your glasses. I have seen them change the zero on the scope a bit. It is another optic in the path. It won't change it much, but it will make a tight group into a medium group.
@archer3181 Жыл бұрын
I used to shoot 32.5 grains of Varget with 105 Berger vld-target bullets out of my dasher. I shot a few 5 shot groups in the zeros with it and hardly ever seen a group over .2 unless I messed up. That rifle was a tack driver.
@MScholtz 4 жыл бұрын
Actions speak loud and clear. You painted a great picture of all the single stage presses you have but the table fixture on that forster is growing roots on your bench. So the best one to start with for reloading towards ELR. Because damn that's a tight group.
@waobuilders8300 3 жыл бұрын
Great content great info.
@dmalcolm24 4 жыл бұрын
Good video. I don't shoot 6 dasher, but I do reload. The equipment evaluation was important for me.
@georgiabowhunter 4 жыл бұрын
Winner winner chicken dinner. I learned a lot. Thanks.
@jasonmpd2946 3 жыл бұрын
Your 6 Dasher videos are making it really hard to not build a 6 Dasher lol
@keithalbrecht4785 4 жыл бұрын
Gavin, love the 6 Dasher! My first were are you getting Varget every place I go they are out! I have not found it since last year. I've been think of building a 6 Dasher for some time. Now I just may have to step it up! love the videos!!!!!!
@1984WillS 4 жыл бұрын
Was going to say the same thing about Varget. He must have been stockpiling....
@derrickgraham3180 4 жыл бұрын
You should check out what the pro's use on seating depth, they did some testing with 10 rifles and 75 thousand off was the optional jump. Awsome article.
@kennethturner8212 3 жыл бұрын
He should do a seating depth test starting 20 thou off the lands and move away from the lands 3 tho per 5 shot group. My opinion. I’m really surprised to see he never mentions a seating depth test.
@AaronBrand 4 жыл бұрын
I'm glad you tried that node after all. I'm wondering about the unexplored node with the 109 grain bullets. I know you're looking more for a "flat spot," but I'm reminded of something I learned in an applied math class about stability of a dynamic system and that looks like a good spot. (Im not an experienced reloader so there's probably lots you know that I don't. But still, im curious!)
@LastCaress7 4 жыл бұрын
Love it when a plan comes together lol.
@Ultimatereloader 4 жыл бұрын
Taking me back to my childhood! :)
@ElmoColt45 3 жыл бұрын
WOW, ENOUGH SAID, THAT WAS REALLY SOMETHING, WOW!
@mikerutkowski3970 4 жыл бұрын
Looks very similar to what I found with the 105’s, I’m waiting to see what happens on the second firing of the brass with two weeks to dial everything in before a match in two weeks
@RT381222 4 жыл бұрын
Thank you for this video. When you ran the shots over your chronograph then entered the data into your PC what program did you use to construct the graph? Have you done a video where you take your data and show how to analyze it? Great channel I'm learning so much from you.
@gilream 4 жыл бұрын
Well done video. You are becoming quite good at this. Do you live in the Rockys?
@charlie5234 4 жыл бұрын
Great rifle build, wonderful results. One question if you were going to replace your chronograph which one would you choose? Thanks again for the great video.
@andyshifflett960 4 жыл бұрын
Gavin, Great results! Just something to think about, brass is very critical to accuracy, grab a small bath mat to place on your bench so that brass isn’t bouncing on concrete! Andy
@dennisbush9612 4 жыл бұрын
Gavin great video. I've been shooting Dasher at Ridgway Rifle Club matches for a couple years now and it’s a great round. You may want to try CCI 450 primers. We run 32.8g of Varget and 450's hold up better with the higher load no flattening or piercing. BR-4 would give us a larger ES. I don't know that much about PRS if you reuse your brass. But in Benchrest our brass is very precious to us. If you can keep your brass try leaving the carbon in the neck. It acts as a lube and make for a more consistent bullet release. ie. lower ES. Can't wait to see what kind of groups you get at long range. We only shoot silhouettes so I've never put mine on paper at range.
@pauli2559 4 жыл бұрын
I envy your progress. All though don't miss a quality annealing process.
@ecleveland1 4 жыл бұрын
Outstanding shooting I would be ecstatic with the loads and the rifle! Have you posted what a custom rifle like that would cost to have built?
@amac3660 Жыл бұрын
I appreciate what you are accomplishing. Anytime you would like to go head to head with an old CZ 452 17 hmr ,100 yds 5 shots in WV Give a holler.
@timbarker3799 4 жыл бұрын
Do you only use the mandrel on new brass? Great shooting by the way. That thing is a hammer.
@pauli2559 4 жыл бұрын
You are living my dream.
@Mountain_Man 4 жыл бұрын
You picked up and dropped the PRCs pretty quick
@cs_yt 4 жыл бұрын
Great Series on 6mm D, the results are fantastic. Maybe the manufacturers take notice and produce a budget rifle on this cartridge (Savage, Ruger, etc.). Looking forward to the next installment. One last thing, get a Labradar, although the numbers (fps) are the same as the MS(I tested), not having any interference with the barrel or adjusting after a shot makes it worth every penny. IMHO.
@gregw3432 4 жыл бұрын
Awesome stuff, I'm guessing this will be for match only? No hunting application for such a precious firearm.
@haydenkapiko3191 4 жыл бұрын
I live in Eastern washington...I'd love to come visit the shop some day.
@johnwallace1729 3 жыл бұрын
Eastern Washington here also .
@GeirMeyer 19 күн бұрын
Love the video
@CHenry1951 4 жыл бұрын
Gavin, pretty sweet rig and some nice shooting ...........so what's next ??
@trangd87 4 жыл бұрын
Great video. Any plans on testing out a barrel tuner? Recently saw Masterpiece Arms sell the EC barrel tuner and a friend posted something on the Kinetic Security Solution Adaptive Tuning System.
@TTiger86268 4 жыл бұрын
Finally, SWEET!!!
@6handicap604 3 жыл бұрын
Gavin, excellent video, and excellent results. I have a new dasher myself, really enjoying it. You have found the same nodes I have with the same bullets. I have found the choice between the 105's and 109's to be a difficult one. I shoot F-class Mid-range (600 yards). Extensive testing has shown the 105's are slightly better in ES and SD BUT,,, the 109's have a much better water line at 600 yards, (20 shot groups) I shoot on a private range with a Shot Marker for practice. The scoring is about equal between the two bullets, depending on how I am shooting, either can score better on a given day. I will probably settle on the 109's due to the water line aspect as well as ballistics advantage at 600 yards. Now for the criticism, You seem to want to be all things reloading to all people, I can understand that. BUT, that negates follow-up on projects already released. This video was released over 4 months ago, you have released nearly 40 video's since then, none of which were the promised follow up on the dasher long range testing. This seems to negate your stated enthusiasm of the dasher build, and has a negative affect on followers who look forward to completion of your projects. I can definitely wait on evaluation of dies and case prep tools and rangefinders to see your final results on the dasher, or are you now into the ARC? Just one mans opinion.
@6NBERLS 3 жыл бұрын
Most excellent.
@nelsonhorne8877 4 жыл бұрын
Awesome!!
@bwdiver1 4 жыл бұрын
Well done! Obviously I can not produce the barrel you made. Can I buy that barrel built to spec?
@luxsteelshooters 4 жыл бұрын
Did you had any feeding issues with the MDT Magazine? Planing a similar build and the reliability of this special MDT magazine is decisive for choosing THE caliber to go with.
@ianshaw7533 3 жыл бұрын
Gavin, what is that rifle rest your using in this video? By the way, thank you for this great resource! I’m planning on developing a 6 dasher load for the ‘22 season, so this was just great!
@warrenbierwirth1113 4 жыл бұрын
This is great build with good results. Wondering if you would try hybrid 100v or is it not as good as a powder. I would also like you to use the Frankfort arsenal press that you have to see if the results would be the same.
@roadglider64 4 жыл бұрын
Love your work! I have one comment. Look at where your right hand is when seating primers. You have a big note about eyes and ears but you hand is in a real bad spot. I know it is rare but primers do let loose on occasion. Keep up the great content.
Anyaischuk LIVE
Рет қаралды 9 МЛН