5 things a fingerboarder needs | Fingerboard Hack

5 things a fingerboarder needs | Fingerboard Hack | Fingerboarding

Рет қаралды 20,568

Күн бұрын

Was this helpful? Do you have other items you'd recommend? Let me know in the comments!
Sandpaper: amzn.to/3s0Xs8W
Loctite: amzn.to/3uXxF3z
or amzn.to/3H0oyRR
Lacquer: amzn.to/3sW75oZ
or amzn.to/3H9xYuI
Screw Driver Kit: amzn.to/3h3wwPy
Above are paid Amazon links that will direct you to my associate account through Amazon.com. As an Amazon Associate I earn from qualifying purchases. Commissions Earned
All music sourced through Artlist.
Use my link: artlist.io/Annie-1160187
Fingerboard Connoisseur
/ fingerboardconnoisseur
www.fingerboardconnoisseur.com/
00:00 Intro
00:48 Sandpaper/nail file
01:49 Loctite
03:26 Lacquer
04:44 Screwdriver kit
07:00 Containers
My IG: / annieyanfb.mov

Пікірлер: 43

@Paige2 2 жыл бұрын

Pringles lid is handy for holding small parts while setting a deck up

@FBsethbrody 2 жыл бұрын

One thing i've been doing over the years is turning old Altoids Tins into FB Cases. As long as the deck isn't wider than 34mm and isn't crazy long it will fit in the tin and its a great DIY FB case. 10/10 would recommend

@mproa5854 2 жыл бұрын

Yeah, I also use altoids tins, the only thing is it wears down the grip on the tail and nose

@missmegan2428 Жыл бұрын

Mztvmi

@Paige2 2 жыл бұрын

Another awesome item is a washable lint roller. They’re great for breaking in/cleaning grip

@AnnieYan 2 жыл бұрын

Oh 👀 never thought of this! I just use regular duct tape or gaffer tape haha

@buydy.7859 Жыл бұрын

eraser is great for breaking in, basically erasing your Foamtape

@BlogSeshFB 2 жыл бұрын

i use a fishing lure box to organize tuning

@mios1900 2 жыл бұрын

You missed the Swiss Army Knife!!

@AnnieYan 2 жыл бұрын

Didn’t think that one needed to be included! But a good one nonetheless

@timonuotio6395 2 жыл бұрын

Yes. I have all those things and for all the same reasons.😄

@michaelpearce4632 2 жыл бұрын

Great video as always, Annie! I use an orange oil based cleaner (D-limonene based) to remove old grip tape adhesive and clean my wheels. I remove the wheels and soak them in the cleaner solution, give them a good dry off and spray some skateboard bearing lubricant and you're good to go!

@michaelpearce4632 2 жыл бұрын

I also use the blunt side of a Stanley knife to cut my grip tape (DKFB74 always have videos on this on their instagram!)

@AnnieYan 2 жыл бұрын

Oil based cleaner is a good shout!!

@reeboksk8er 2 жыл бұрын

Some good bits and bobs on that list! I'd never thought about using loctite before. I have a miniature cylindrical file which I use for gripping. I also look at containers or pretty much any object with the filter "Can it be used in any way for Fingerboarding"

@AnnieYan 2 жыл бұрын

Haha you get it!! Also loctite truly is the best haha

@gdtv3987 9 ай бұрын

I literally have always used a skinny screw driver and a razor blade since I was a kid to grip my Fingerboard and I used the excess pieces of black magic from my actual skateboard after scraping the edge of my board and cutting off the edges with a razor blade

@skatefan216 2 жыл бұрын

One thing you need is a warning not to buy anything from Joycult

@AnnieYan 2 жыл бұрын

🤣 essential

@lukeypookie_fb6174 2 жыл бұрын

Thx

@Janred05 2 жыл бұрын

New subscriber here💛 6.96k road to 7k subs advance congrats 🎉

@nene3hunna 2 жыл бұрын

I use the nut end of a fb tool to cut bolt holes in the grip without taking the trucks off

@KDP2009 Жыл бұрын

I would say avoid laquer if it is a graphic you really like. Sometimes depending on what the graphic is made out of or what clear coat the deck already has on it, it can potentially have a chemical reaction where the solvent in the laquer can eat away the deck graphic if you aren't careful. I would reccomend testing just the tail or nose first to see how it reacts before coating the whole thing, and I wouldn't personally use it on any decks I'm not willing to ruin anyway in the process.

@slwhd831 2 жыл бұрын

lacquer is gud

@dumass09 2 жыл бұрын

Annie telling every one about how she got her small big cases for fb stuff. Mean while me going to search my whole house for small containers for fb stuff cuz i got mine just on a table😂👍👍

@Patidedo Жыл бұрын

buen video

@charleslewis6834 2 жыл бұрын

Is the tool set that you have linked on your other KZfaq videos is it the same one you have the one thats $30 I wanna make sure I get the right one

@AnnieYan 2 жыл бұрын

It’s not the exact same because I got mine on a diff site but it’s similar enough!

@kristinabontrager2238 2 жыл бұрын

Hey Annie I was just wondering off of your complete knowledge what would be the best fingerboard setup no matter the price?

@shredfb7642 2 жыл бұрын

Black river can get insane prices if you want pretty good quality more affordable I suggest teak tuning

@reggieo.hernandez5660 2 жыл бұрын

@@shredfb7642 i have a teak complete and the broken knucles and i feel is more quality for the price from the BK

@yaariek 2 жыл бұрын

what grip tape do you use?

@AnnieYan 2 жыл бұрын

fbc black velvet

@adamdisalvo9247 2 жыл бұрын

I'm not gonna agree with the lacquer it adds too much weight and it takes the pop away

@jordanpopo9693 2 жыл бұрын

I understand the point of this video I have all these things

@atnfn Жыл бұрын

5 fingers on one hand? Nah probably don't need all 5

@johnbennefits101 2 жыл бұрын

I would not recommend spraying over a graphic… depending on what you use it could melt the graphic

@AnnieYan 2 жыл бұрын

!!!!! This hasn’t happened to me yet. Didn’t realise it could happen

@harrisonbronn4417 2 жыл бұрын

first lol

@kingdavid7516 Жыл бұрын

is this a joke?

@Grabient Жыл бұрын

like the whole video?

@Yytgte Жыл бұрын

Shop kmh.FBs