What Fingerboard Should You Get? (Best Shapes)

No video

What Fingerboard Should You Get? (Best Shapes)

Рет қаралды 29,468

Күн бұрын

I’ve been getting a few DMs recently asking about what deck to get and more specifically what shapes to buy so I thought I’d make a video to let you know what my thoughts are on this!
Obviously do not take every single thing I have to say as gospel. At the end of the day it’s 100% about preference and the things I say are probably biased since I do have a preference when it comes to shapes. That being said, I hope this video was helpful for you. If not I hope you enjoyed listening to me ramble on about different shapes, haha.
Also, by no means am I saying that the brands I mention are the ONLY good ones out there. Obviously there are so many more but I just happen to support these ones.
BLM Resources:
drive.google.c...
Companies I mention in the video:
uniquedecks.co/
www.beastpants...
goatontheroadf...
fizzyfingersfb...
/ fldecks
/ catfishbbq
00:00 Intro
00:59 What Companies?
02:12 Shapes?
02:26 High Shapes
04:06 Mellow/Low Shapes
05:49 Medium Shapes
07:03 Width/Length
08:24 Popsicle or Cruiser?
09:13 Concluding Thoughts
Me:
/ annieyanfb.mov
goatontheroadf...
/ goatontheroad_fb

Пікірлер: 79

@joelstatosky1817 2 жыл бұрын

Deep concave and overlly deep dips does actually give you less control because there is less effective surface area to use, and your fingers must be put into a position where they are not as comfortable as they would be on a medium shape. Same thing with overly high kicks. Theres a point in fingerboarding where the objectively best performance is found, and I want to start making my own decks to find that point. I'd call the brand goldielocks

@peorybebdj3864 2 жыл бұрын

I like low shapes to :)

@Ele0296 3 жыл бұрын

Oh my gosh you used time stamps, I love that

@AnnieYan 3 жыл бұрын

i been using timestamps for all my recent videos. have you not been watching :(

@gabe.das1 3 жыл бұрын

@@AnnieYan I have :)

@user-vm8vm9dl3n 2 жыл бұрын

@@AnnieYan 😅

@eggzfb 3 жыл бұрын

Best fingerboarder youtube in the game!!

@AnnieYan 3 жыл бұрын

That’s you sir

@justicelledo0114 3 жыл бұрын

Davidsjones: what?

@enochlightburst333 3 жыл бұрын

Super great professional content sister of the east! Love it! Your progression is supreme!

@mrchief5844 3 жыл бұрын

I absolutely love mellow kicks and concave

@Nomads4216 2 жыл бұрын

This girl knows her sh_t. Go Annie, go Annie.

@GoombaMuffins 3 жыл бұрын

absolutely killing it homie, you deserve way more views

@AnnieYan 3 жыл бұрын

Thank you!

@actionjack7655 Жыл бұрын

The most informative fingerboarder in the community!!!

@planbbee 3 жыл бұрын

You’re videos are actually super cool and very informative. They keep getting better and better also. Keep doing you girl ✊🏽

@tylerjones7310 2 жыл бұрын

Have you tried a cruiser fingerboard decks

@Passivefingers 3 жыл бұрын

YESSSS ANNIEEEE!!’nn wooooo

@Ele0296 3 жыл бұрын

Almost like a podcast you say... ummmm 🧡

@AnnieYan 3 жыл бұрын

hehe

@tylerjones7310 2 жыл бұрын

Annie yan have you make fingerboard decks of your own you can get some fingerboard molds custom Mold and semi custom mold at nfb molds they three d printing the mold. They will see a custom Shapes sizes up to 40 width mm by 102 length 60 mm wheel based you can go bigger wheel base I might be wrong I’ll send you his email as well thanks try making your own fingerboards sometimes just an idea thanks I hope you like this making fingerboard decks for your self idea the fun part is wait 24 hours to dry then drill conter sinked drilled sanding and filing cutting and etc graphics or use Posca paint pens or any kind of paint pens optional clear goat and either way you got a fingerboard deck blank or paint works of art or graphics of art it’s a cool way and to get what you like shapes wise and such then for the prices custom Mold is 90 bucks plus 5.50 shipping on esty then semi one is 60 Bucks plus shipping it used to be those prices not sure but that’s what I’ve heard so far

@enochlightburst333 3 жыл бұрын

I definitely desire a cruiser shape fingerboard much... closest deck to one is an oldschool Powell techdeck I have ...

@flushfingerboarding8670 2 жыл бұрын

Would a teak tuning board be a low or high board?

@adriendechaumes660 3 жыл бұрын

Do you ever tried a kalye before ?

@8bitsamurai6 8 ай бұрын

Great breakdown. I know this old but newer and trying to try as much styles and brand i potenial can. Curious is it worth getting ytrucks to compare to obs and dynamics?

@drewcook7826 3 жыл бұрын

rate frsr fingerboards or just look at them and tell me what you think i just got a boxy 34mm deck from them

@sxmnerfb6061 3 жыл бұрын

I know this is really late but I am allowed to get a beastpants for Christmas but there is a 33 feral and a 34 domesticated, I want to get brt’s but depending on what board will determine the size of trucks. Please help me chose which one to get! Please get back to me soon my mom is gonna order it soon

@AnnieYan 3 жыл бұрын

33 is a good size in my opinion. Domesticated is a really low shape so if you don’t like that then go for the feral

@wallshiba670 3 жыл бұрын

What company do u prefer the most?

@calmyokoolaid1133 Жыл бұрын

I have been binging your channel lately. Love your content and hope that you are doing well!

@Not_Ur_Dude_ 3 жыл бұрын

I like to use low mold 33-34mm by 91mm decks. I use an Opal

@willnicholson7970 3 жыл бұрын

91mm?????! that’s tiny

@KleineKassiopeia 3 жыл бұрын

You know that I've been fingerboarding for quite a bit. I personally absolutely despise cruisers. I just don't like riding them. I'd also categorize boards in street shape and posicle shape. Where a street shape has more of a pointier nose/tail and a popicle is more rounded as a general.

@aloykhor2972 3 жыл бұрын

I think pointier kicks are more of a 0 shape

@AnnieYan 3 жыл бұрын

I have never loved cruisers either myself aside from the Poli wave runner! Good point about the shapes- totally missed that 🤦🏻‍♀️

@evols.1 2 жыл бұрын

x-wide or x-wide low

@MichaelBrianInc 2 жыл бұрын

This is a great video and informative. A year later has any of your opinions changed or still the same? Since you mention P rep decks what are your thoughts on teak tuning?

@jacksonblack2776 3 жыл бұрын

You too cool. Thanks!

@enochlightburst333 3 жыл бұрын

Your da best Annie! Great vids always I use tech deck broken knuckle and teak fingerboards! I recommend!

@niko5782 3 жыл бұрын

tbh I don’t really look for specific shapes n stuff I just work with what I got gimme a 100x100 and I’ll use it

@jaiedhen012812 3 жыл бұрын

Very interesting video

@odinb6637 3 жыл бұрын

Is the beast pants domesticated mold mellow?

@AnnieYan 3 жыл бұрын

Yes

@odinb6637 3 жыл бұрын

Annie Yan thanks !

@najeewashington1431 Жыл бұрын

I come back to the video and watch it all the time but can you touch up on the reasoning for the nose and the tale being different and why it’s more beneficial

@simplylucxs 3 жыл бұрын

I love fingerboarding my self “professional”

@tylerjones7310 2 жыл бұрын

I’ve start with 32 mm up to 36 mm now I’ve started fingerboarding decks with 36 mm and upper mm shapes like 40 mm up to 98 mm wide shapes

@Janred05 Жыл бұрын

Have u tried Club9 or Fyre fingerboard decks is it good? Pls do reviews and what's ur thought about the shape and performance

@mariocristobalcolladoavile448 Жыл бұрын

Hi there, greetings from Nicaragua. Where would you place Yellowood shape, medium or low? I've been riding a 32 mm yellowood one for ten years, I'd like to try Berlinwood or Blackriver, but what shape is similar to YW in those brands?

@APEX4EVER 3 жыл бұрын

Can you make a video like this about how to film yourself like how to get good angles and shots? I’m really struggling with the camera work to get clips.

@AnnieYan 3 жыл бұрын

you should check out my filming setup video. It doesn't go into angles per se- I think that's just something you discover for yourself!

@APEX4EVER 3 жыл бұрын

Annie Yan can do!!!

@BDDaumants 2 жыл бұрын

What is the best wheel shape?

@noone3587 3 жыл бұрын

I ride a yellowood startwood. Are they low or high? Cause I like this shape a lot and would buy a deck whith this shape. (My board splits after one year)

@ttyylleerr1515 3 жыл бұрын

I've had a 30mm for around 12 years and am going to get a 33 or 34

@Drissy. 3 жыл бұрын

Best decks are yellowood and Berlinwood X-wide

@saraleticiatonolli2350 Жыл бұрын

Which one should I get and why? 32mm/34mm or 36mm?

@AnnieYan Жыл бұрын

i really like 32mm! i think it's the perfect size for most beginners, and it's easy to move up if you feel you want to try a bigger size. your trucks will still fit a 34mm board, whereas 34mm trucks on a 32mm board could look really odd

@SeargDoofy 3 жыл бұрын

What size concave, kicks and dips is a tech deck 32mm

@AnnieYan 3 жыл бұрын

Imma be honest I have no clue! I don’t have one myself :(

@SeargDoofy 3 жыл бұрын

Annie Yan yeah no worries do u know a good fingerboard that I could get as a beginner coming from a tech deck other than a p rep

@AnnieYan 3 жыл бұрын

@@SeargDoofy depends on your budget but For sure recommend goat on the road (my sponsor) otherwise unique and beastpants are both reliable

@SeargDoofy 3 жыл бұрын

Annie Yan awesome tysm for the info and btw love your content and keep up the great work 👊🏻👍🏻

@domarobyn9520 3 жыл бұрын

I prefer high concaves high kicks deck cos i can land tricks in that better

@tuckerlaurent3219 3 жыл бұрын

I love your vids!!!!

@DougDoNascimento 3 жыл бұрын

@gonefingerboarding

@Slushcult 3 жыл бұрын

Another solid vid!

@fingerboardworkshop6273 3 жыл бұрын

🙏👍

@AnnieYan 3 жыл бұрын

thanks Doug!

@tannerrichmond 3 жыл бұрын

i ride a dum1 they are a amazing low deck

@NWSupreme 3 жыл бұрын

Whats a good upgrade from a tech deck?

@NEVERKNOWSBE5T 3 жыл бұрын

No matter what board you get that isn't tech deck you'll instantly feel more comfortable with it, I know from personal experience. When I made the jump though I bought a 32mm low kicks/mellow concave deck which I felt the most comfortable with so I would recommend that.

@NWSupreme 3 жыл бұрын

@@NEVERKNOWSBE5T Thank you so much!