How about this tip so that you can flyfish another day? Put on your chest high waders, then walk into the river, until the water is up to your waist then cinch up your wader belt. This removes the air in the waders below your belt. I found myself floating upside down, with my head and upper torso below the water line and my legs above the water line with all of the trapped air.
@charlieboutin3341 Жыл бұрын
Glad that you got out of that situation. Great tip about getting the air out. Thanks! 👍👍👌
@FlyFishDan Жыл бұрын
Awesome tip Frank - thank you!
@FlyingFox007 Жыл бұрын
Another great video FlyFish Dan! One thing that I could add to the list is a good wading stick. I fish alone quite a bit and I'm getting older, so my agility isn't as good as it used to be. I got a collapsible wading staff, and it makes a big difference in fast water and with slippery rocks. The one I got is called the River Stick, a guy in Canada makes them. Once you snap it together it would also make a good weapon to fend off predators. You can't get them in stores but there are others out there. I put a carabiner on the loop so I can just clip it to my sling pack when I'm fishing, and it's right there when I need it. It really changes how I fish. Fish-On!!!
@FlyFishDan Жыл бұрын
Good stuff Neil - I will have to check that out!
@stevenm6301 Жыл бұрын
One of the best things I’ve bought in the last 5 years is the Orvis net retractor. Done with magnets!
@FlyFishDan Жыл бұрын
Nice!
@xfire301 Жыл бұрын
It took me 40 years to discover folded line guide threading. Life changing.
@FlyFishDan Жыл бұрын
So good :))
@kevinmcphee7922 Жыл бұрын
I was lucky… the guy that sold me my first fly rod showed me this trick at the shop. Same with the leader and line stretching trick to get the loop memory from the reel to relax.
@justal4844 Жыл бұрын
Another wonderful video, FFD. If you don't mind, here is my tip. When adding your leader to your main line, double the end you just slipped on the main line and then pull the leader through. I see a LOT of people searching for the small end to thread through the main line loop, which is the same kind of PIA as putting leader through rod eyes. Hope this description makes sense. ☮
@FlyFishDan Жыл бұрын
Thanks for the tip Al - much appreciated!
@rosiestein209 Жыл бұрын
Ha! Good stuff all of which I do not have. 🤣 But, I've been threading my line like in your tip for years. Oh well. Cool thing about this sport is there's so many ways to get 'er done. 👏
@FlyFishDan Жыл бұрын
Well said Rosie!
@charlieboutin3341 Жыл бұрын
Great tips Dan! I took a small hook sharpener and ground it down to a small 3/4”x 1/4” piece and epoxied it to my forceps/cutter that also has a hook eye cleaner. 4 in one tool. I use it to sharpen almost every time I’m fishing heavy cover for bass with plenty of hangups, and hopefully at times after lots of caught fish. It’s all I carry besides flies and extra tippet. Have a great weekend! Fish On! 🎣👍👌
@FlyFishDan Жыл бұрын
Great tip Charlie! Thank you and fish-on indeed!
@CalebThANGELman Жыл бұрын
So with the rod holder. When you are casting with one rod does your line ever hit the rod that is being held?
@FlyFishDan Жыл бұрын
Stay tuned for tomorrow's video! :)) Happens occasionally...when you least want it to
@OregonFishingAdventures Жыл бұрын
That last tip I've seen all over the place but I honestly don't do that I fished ultralight spinning rods with 2-4 pound line which would be 6-7x tippet essentially and I have never had a issue running my line through guides but I guess everyone is different just never been a issue for me regardless of what rod I'm using
@4stringmanagmaildcom Жыл бұрын
I've had a pair of boots with the boa system for a couple years. The stainless wire frayed and parted after just a few uses. Maybe I just got a bad batch of wire. Anyway, the supplier did send me a wire replacement kit free of charge and I did the repair but I will say it wasn't a simple process. Tiny little parts and not intuitive routing. But I got it done and so far the new wires are holding up. All that said I do agree the winding up and release is much easier than laces and overall I'm satisfied. Recommend a supplier with a good guarantee.
@FlyFishDan Жыл бұрын
Great feedback Captain Mike - thank you!
@johnkinsfather64 Жыл бұрын
A good pair of speed laces will do the job $9 at Walmart or $1.79 on line.
@FlyFishDan Жыл бұрын
Good tip!
@DDubbs76 Жыл бұрын
Your channel is fun, buddy.
@FlyFishDan Жыл бұрын
I appreciate that!
@ThePorpoisepower Жыл бұрын
Some Fly lines don't come with a welded loops (even premium brands), also I prefer to not have a loop on some of my lines.
@rustyknott-W.DАй бұрын
Two rods? How about simply changing the fly? Try working a brushy stream with two rods and you'll see what I mean. The problem with Boa is you're always re-tightening them if you move around a lot. I had a pair of Boa Cross-country ski boots and they'd get loose after a half hour of skiing. I trashed them after one season. Boa mechanics are just another thing that can break down. Laces are much more reliable. BTW, wet laces tighten up better than dry laces. You can tie a nail knot without a tool if you know what you're doing.
@FlyFishDanАй бұрын
Yeah, I definitely avoid the two rods on tight small streams, more of a pain in the ass for sure. Great point on the BOA, I've experienced that too...but man, taking them on and off with the BOA makes it worth it!
@mobiltec Жыл бұрын
Well here I go again. Another new sport to go out and spend a million dollars on for all the GOTTA HAVE stuff you need to enjoy what you are doing. LOL.... I wonder if I can spend as much on fly fishing as I have on Skydiving.
@FlyFishDan Жыл бұрын
You totally will :))
@AnonymousOtters Жыл бұрын
I was with you until you got to the wading boots. Can entirely do without BOA. I've seen them break on multiple peoples boots, seen scraps of the mechanism on the shore and in parking lots at ski areas. No thanks. Regular laces are just fine and give a better fit, IMO
@FlyFishDan Жыл бұрын
Hopefullly my BOA's will keep working well - so much easier to take off and put back on!
@AnonymousOtters Жыл бұрын
@@FlyFishDan I remembered commenting, so just had to update. Went into Red's yesterday for new boots and literally broke the BOA on a brand new pair of Simm Guides boots just trying them on. The gentleman said, "Oh, I've never seen that happen before, but we do sell a replacement kit for them...." Needless to say, I went with some with laces, haha
@adventureswithfrodo272111 ай бұрын
All old already been donr.
@FlyFishDan11 ай бұрын
Huh?
@robertfrey3607 Жыл бұрын
Yeah...none of this is needed. Although I do like my knot tying tool. That being said...I've personally never had a problem tying my boots.