$50 Go Kart Build 2.0!!

Рет қаралды 572,293

3 жыл бұрын

Ike bought a $50 go kart! Can we make it run and ride for minimal investment? In today's episode, we do a follow up build to our original $50 go kart build video from years ago. Can you still buy a decent go kart for $50? This one wheel drive vintage Streaker go kart has a late model Jiang Dong 196cc overhead valve engine that isn't running. With a little bit of cleaning and under $50 worth of parts, we make this rusty old go kart run and ride!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Centrifugal clutch (420 chain): bit.ly/3nBZRmm
420 chain: bit.ly/2l6zklT
Steering tie rods: bit.ly/3bpJjYe
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 1 000

@BaltaM4ster 3 жыл бұрын

ike: "crappy water on the flor" - dang my floor. 5 mins after does a huge burnout across the shop :D

@Hurtydwarf 3 жыл бұрын

To be fair, water is worse on a wooden floor than a skidmark.

@BaltaM4ster 3 жыл бұрын

@@Hurtydwarf how does that even make since he just burnt a line that wont be coming of

@Hurtydwarf 3 жыл бұрын

@@BaltaM4ster A burnt line in wood wont cause any more issues than that. Water soaks into the wood and expands and contracts and destroys it. Water damage is rough, especially on plywood flooring.

@Mr.M1STER 3 жыл бұрын

@@BaltaM4ster Yeah as said, water will soak into wood but I'm sure they dried it up with a rag pretty quick so either way it will not be a huge deal.

@sawyernanook3964 3 жыл бұрын

Sick can’t beat these old cheap carts

@Dixon_M 3 жыл бұрын

Since the front is already banged up, you should extend the front and relocate the pedals so Ike can actually ride it 😂

@elijahmccartney2545 3 жыл бұрын

They need to get a fl250 style steering wheel with the gas and break on the steering wheel

@Psyco913 3 жыл бұрын

If they extend the frame between the seat and the steering wheel it would give them more room and also move the pedals out further.

@EJ-74 3 жыл бұрын

How many of you died laughing when Isaac had those ropes on his feet 😁🤣😂 Hilarious 🔥👍✌️

@Sloppyjoe96 3 жыл бұрын

I did it was hilarious realizing he wasn’t joking about doing it haha

@BigT27295 Жыл бұрын

Love him ,He's a hoot.

@CarsandCameras 3 жыл бұрын

Five years later, we found another $50 go kart!

@mrmaddoxp 3 жыл бұрын

I got a more off road one of these free from a friend a few months ago that has a tecumseh 6.5 on it. I’d say Ike’s probably right. I slapped a $10 carb on it and it runs great!

@dontworryaboutit8445 3 жыл бұрын

Why do you use brake cleaner is there something wrong with starter fluid lol

@jubileudacachaca7777 3 жыл бұрын

pliss legend

@dylangreenlaw8493 3 жыл бұрын

does anyone know where i can find those types of rims i can’t find them anywhere

@matthewhammond3019 3 жыл бұрын

I have a streaker performance S460 and I'm pretty sure when I did my research I found that is is made by manco

@vinnyd.thetwo-strokething8213 3 жыл бұрын

That MOTHenol in the fuel don't really fair well, gotta get that mothenol free stuff!

@dacarvoid45 3 жыл бұрын

Lol

@dacarvoid45 3 жыл бұрын

MOTHenol... good one.

@vinnyd.thetwo-strokething8213 3 жыл бұрын

@@dacarvoid45 It was a joke that had to be made! lol

@TERBIZ 3 жыл бұрын

That gocart was manufactured in 1998 it’s also known as a “fun-kart” manufactured by ken-bar manufacturing co. Of Cornelia Georgia

@williambaum785 2 жыл бұрын

1993 not 1998 my parents bought me one brand new from fisco in Tracy ca

@jon-thomasbrunton9897 2 жыл бұрын

They also had an entire line of streakers including an off road varient with a rear diff straight axle

@troutie7726 3 жыл бұрын

Laughed loads ty... Shame about ya nads.. pain is temporary, legend lives forever

@angelwarrior8019 2 жыл бұрын

Pain is temporary weakness leaving the body. You guys should take your death cart to an air strip.

@johnmorgan1629 3 жыл бұрын

You need a 'Dang It Bobby.' T-Shirt.

@snakeskinproductions7500 3 жыл бұрын

I'd buy one...

@18wheeler77 3 жыл бұрын

That would be a copyright infringement.

@cheesefarmer3545 3 жыл бұрын

They got all kinds of KOTH shirts and merch on amazon

@alexpaumen3937 3 жыл бұрын

In general reviving old vehicles that have been sitting for years is extremely satisfying. Also what's the story with that W140 S-Class 29:50.

@kalebroark87 3 жыл бұрын

Looks like Ike's like me: loves to collect projects but rarely works on any of them. Almost certainly got a deal he couldn't pass up on it.

@johnbischoff5862 3 жыл бұрын

Doctor: HOW DID HE BREAK HIS ANKLES??? Ike: It’ll be fine.

@3v068 3 жыл бұрын

You know thats exactly what he said. On or off camera XDXD

@freddiemcfarland5781 Жыл бұрын

My first go kart was this model it black. Had a 5hp briggs flathead on it. $500 sticker price at local Honda dealer. Pull the governer wide open with your finger and it would run 55 mph! The times on i had on that kart!

@Mustangguy9702 3 жыл бұрын

Company is called Ken Bar. Model Streaker Engine is a Tecumseh 5.5hp powersport I have one that has seen its better days aswell

@gavincline209 3 жыл бұрын

Man, I built one 98% like this with my dad as a kid. Even the metal rods on the pedals. Best fun I ever had with a 5hp Briggs.....literally right down to the wire running the same way for throttle cable!!!! Lol never figured out a better way to make a mechanical linkage that would actually work good. Still have it and gonna restore it with my son. Fun little yard karts.

@ryanmalin 3 жыл бұрын

MY OLD MAN BOUGHT ME THAT KART NEW WHEN I WAS 5!!!!! It came with a 5hp brigs and it was 2wd. Removed the governer. Also put some nice slicks on it. I used to lock up the rear wheels and drift the thing around and do a 360 on the street. One time I flipped the kart onto myself in the road, not a fun day. This video is such a nostalgia trip. I vividly remember those pedals, the seat, the back u bar behind the engine and that toggle switch under the steering wheel.Oh yeah i had to add my cart was Blue! My brother turbocharged it with a gas powered leaf blower and cooked the piston ring. A worthy send off indeed.

@heartsky 3 жыл бұрын

Had one of those when I was 8, my grandad bought 3 of them for me my brother and my cousin, in Chattanooga, Tn. That was one of the funnest summers of my childhood, racing those things around grandpas 2 acre farm. This was in 1979, fun times! Thanks for ringing my memory bell, lol

@DoItMyselfGarage 3 жыл бұрын

A good friend always makes sure you are okay, and then proceeds to laugh uncontrollably. Loved it!

@richiefearn4214 3 жыл бұрын

This week on Cars And Cameras ,John nearly runs over his gentleman’s region ,Ike destroys his gentlemen’s region ,and a one wheel peel is a $50 deal,great episode guys 👍👍

@RC_Trailblazers 3 жыл бұрын

I dont know what made me giggle more. Ikes feet dangling with rope on the pedals... oooooorrr!!! The slow 🐌 start!

@wrenchandrip 3 жыл бұрын

the most genuine content on youtube. love it, cant beat a cheap toy

@Stickmanght 3 жыл бұрын

That one wheel peel spitting mud all over the place is cracking me up. Add in having to sit off center just to get some traction and it makes this one of the funniest episodes of Cars and Cameras I've seen in a while.

@PyroModder85 3 жыл бұрын

TURN THAT COFFIN INTO A GO KART!!!! CALL IT THE MUNSTER-KART!!

@traxxaskid9200 3 жыл бұрын

Yeah

@deannagrayston4778 3 жыл бұрын

Lol

@johndudemech9471 3 жыл бұрын

I’m 17 and I got the reference 😂

@traxxaskid9200 3 жыл бұрын

@@johndudemech9471 I'm 15, and I didn't.

@hammerT2997 3 жыл бұрын

On 4 wheeler tires, 4x4 and all.

@mikewhittaker4520 3 жыл бұрын

Love it when ike tries to show off at the end of his run flips the go cart and bags him self at the same time well done sir 👌 Love the video keepnit up guys id love to see the cross cart and the trophy truck go head to head

@cashalan159 3 жыл бұрын

I had one of these when I was little, same frame design and cushion. Mine had a briggs on it though. Was the most fun I ever had when I was 8. Keep up the good work Jon and Ike! Love the videos.

@tobiaskoning115 3 жыл бұрын

Back to the good ol' days

@BMKknight 3 жыл бұрын

True cars and cameras fashion. True entertainment ,My best minibike/gocart channel

@christiancooper478 3 жыл бұрын

“Its running on dead moth man” should be a hat or a pin

@schalkvanheerden837 3 жыл бұрын

I wanted to say "Ike ain't gonna have no kids" the way he sat in the cart, dangit bobby and he went and flipped it. Sorry Ike, I hope your ok where it matters. Keep it going guys, love your videos.

@Mr.M1STER 3 жыл бұрын

Ike always flips something. I love it.

@thebaconbrotato 3 жыл бұрын

John: "Dude! Are you alright?" Iaasic: "Muh nads!"

@theslashmanrc7503 3 жыл бұрын

WOOOO BEEN HERE SINCE THE ORIGINAL!!!!

@sammymaldonado8168 3 жыл бұрын

Mee

@isaiahpolk6598 3 жыл бұрын

Amazing build!

@JMLUSA1 3 жыл бұрын

OH MY GOSH!!!!! That eas YOUR FUNNIEST Video so Far!!!! So Funny, And SO GLAD You guys Do your builds the Way You Do! CarsAndCameras! No PartsNoPlan! It'll be Fine!

@T34theAmericanheavy 3 жыл бұрын

Yes! I was hoping you guys were gonna do another one

@Damage_Incorporated. 3 жыл бұрын

Man, that "Jiang Dong It Bobby" is fast!

@elijahmccartney2545 3 жыл бұрын

Your 50$ go kart video years and years ago got me into go karts which got me into mechanics and now I plan on being a mechanic

@trailchaserxr 3 жыл бұрын

So close to one Million! I’ve been subscribed since 50k loved y’all’s videos ever since. Y’all are doing perfect keep doing what your doing and don’t change!

@deemckoy4990 3 жыл бұрын

Hey that's literally the go cart my my father brought me back in 1989 when good year tire service sold them they came with 5hp Briggs and stratton engines.

@Jacquezcarr23 2 жыл бұрын

I Got One With That Motor.. paid $200 had to Do a Luh Work but runs Bad ass

@james6216 3 жыл бұрын

it’s crazy how everything comes full circle. I discovered y’all off of the original video 5 years ago and here we are…

@bumblur 3 жыл бұрын

Briggs & Stratton for the win! Thanks for sharing!

@corygilbert5666 3 жыл бұрын

Yall should seriously make this kart a 3 wheeler. lengthen the back and move the seat back some, one wheel in the rear, and maybe even put a minibike tire on the back, see if it's faster. Love the content, I hope yall never ever stop! About to finish my first yardkart and it's a bit like this one but a bit heavier. And I got all sorts of ideas for upgrades later on.

@chillycheeze2207 3 жыл бұрын

I never laughed so hard when ike flipped it🤣🤣🤣 The way he kicked his feet on the grounf just made me die hahaha

@HugosGoKartsHd 3 жыл бұрын

Yes, my favorite boys are on it, 😁👍🏼 love the videos.

@scooterboy304 3 жыл бұрын

I had a streaker one seater when I was a kid.my grand dad bought it new for me and it had a 5hp briggs on it from factory.it was a blast to ride.it also came with an orange safety flag on a 5 foot pole.

@antoniorivera6187 3 жыл бұрын

Awesome video guys 👍🏻just love all your go kart builds you guys sure know how to have fun 👍🏻👍🏻take care be safe

@itsraiden9375 3 жыл бұрын

I wanna get one of those and put 4 engines on it

@owenkotal8805 3 жыл бұрын

looks like there's enough room in back for another engine, you should make a 2 engine 2 wheel drive kart

@mzinns 3 жыл бұрын

You guys are great! So much fun to watch this!

@Work_G 3 жыл бұрын

This cheap and quick little project is the best

@danf4616 3 жыл бұрын

I don't know why seeing a 40+ yo guy flip a kid's go kart and lay on the ground is so funny...but it was! 😁 Glad only Ike's "pride" was hurt...

@robburdack4361 3 жыл бұрын

imagine how fast this would go with a child that actually fits it .... talk about a death trap

@LIMowersAndMore 3 жыл бұрын

I’ve watched you guys since the 212cc first mini bike build, can NOT believe how far yall came! Congrats hope to see you hit 1 million subs.

@isaacitllbefine7231 3 жыл бұрын

Thanks

@LIMowersAndMore 3 жыл бұрын

@@isaacitllbefine7231 no problem buddy

@coltenlooney5811 3 жыл бұрын

I love these classic originals! You guys rock! Always look forward to your vids!

@GearHeadWW23 3 жыл бұрын

Was on another video, clicked over faster than Ike's nova

@adamr9215 3 жыл бұрын

So, you watched the other video twice, took a nap, got dinner, then thought about watching this video?

@GearHeadWW23 3 жыл бұрын

@@adamr9215 It'll Be Fine

@mylifeismylife5056 3 жыл бұрын

@@adamr9215 yes folk man

@uni-byte 3 жыл бұрын

The ultimate in "back yard" mechanical ingenuity. Been there and done that. But for some reason I can't bring myself to do this sort of thing any more. I'd make a serious try to resurrect stuff like this. Maybe because I was a mechanic for a top 10 off-road motorcycle racer for a few years. Maybe, just not sure. I just see so much cringe worthy stuff on this channel .. but .. I .. can't .. look .. away ..!

@marktroiani5401 3 жыл бұрын

Epic burnout! Great videography.

@ImTheJoker4u 3 жыл бұрын

Seems like a perfect candidate for a frame stretch 😉

@paulpetty9338 2 жыл бұрын

And a 2 wheel drive axle,bigger tires rear and front to get it off the ground a weee bit.not much.

@morgankovarik3649 3 жыл бұрын

He was wearing the helmet on the wrong head.

@StansWorld 3 жыл бұрын

Ken Bar Made just up the road, Closed about 8 to 10 years ago, I remember them well.

@xxtrengt8871 3 жыл бұрын

Love this kind of old shool episodes !

@adamr9215 3 жыл бұрын

The easy way to make a locking nut is to heat the nut and put a little solder in the last couple of threads. Easier than beating it with a hammer.

@carbide1968 3 жыл бұрын

Or lock tight. But reasons.

@bikelifevance_ 3 жыл бұрын

Omg I’ve been a fan for so long it’s already been 6 years😳

@killzone9810 3 жыл бұрын

That should be a name of a rock band “ running on moth”

@traxxaskid9200 3 жыл бұрын

I was thinking "Blade" or maybe "Fire" (fire not included)

@bobmoggy1273 3 жыл бұрын

Hey guys luv ur show up here in Sudbury Ontario. My kart is almost the same. Turns right fast and drifts turning left. Loads of fun. I put turf tires on the back and wheel barrel tires on the front. Keep up the good work.

@littleyardsmallpasture9872 3 жыл бұрын

You guys are super informative and hilarious at the same time its very enjoyable watching this channel!

@eliancastillo726 3 жыл бұрын

Had never been so early

@TheBestOrion 3 жыл бұрын

Eh that oil was fine. Still in the break in stage 😂

@mr.random4472 3 жыл бұрын

lol

@calzonemoto4651 3 жыл бұрын

I love the revival viddys. Taking something left for dead and bringing it back to life. How Good!

@leedavis3736 3 жыл бұрын

What about throwing slightly wider tires on the rear and a live axle and extending the frame about 6 inches ? Just a thought

@600wheel 3 жыл бұрын

Is it just me or do they seem to be having marriage troubles lately

@JustStayingGroovy 2 ай бұрын

Umm.. no?

@SportbikerNZ 3 жыл бұрын

Isaac's super power is being able to burnout anything 35:36 Pity the end of vid links obscured it. But really cool to see this relic hauling. Pretty darn quick!

@loganbrasher4593 3 жыл бұрын

Love it!! Yal really need to build a high cc burnout kart to take to a cleetus and cars event and get in the burnout competition!

@DarkLinkAD 3 жыл бұрын

Pretty sure I had the same cart. 3.5hp Briggs, spin all day, do 35 on pavement and was dead reliable.. Tons of fun to slide sidesays. In 1993 I would go straight cut hard and stand on 2 wheels for fun.

@dctv1632 3 жыл бұрын

I’ve had a number of the pacesetters of that kind. All of mine have been one wheel drive. As you’ve probably figured out by now they’re a ken-bar model kart made throughout the 90’s and maybe part of the late 80’s. and this particular model was a base model. Nothing fancy just your run of the mill yard kart. I believe almost all of them came with a Tecumseh engine. Not sure what HP but if I had to guess I’m sure it would’ve came with a 5.5HP. I have seen some with the Briggs flathead “fun power” engines. They’re very common but what’s different about yours is the pedals which I don’t think are original to the frame.

@wellthatsaTV 3 жыл бұрын

It's insane how long it's been, the first video I watched from you guys was your $50 gocart video, and I've been watching ever since.

@richhowlett5815 3 жыл бұрын

Sweet casket dudes!

@slickniner 3 жыл бұрын

The rope pedals are possibly my favorite cars and cameras aftermarket enhancement.

@docink6175 3 жыл бұрын

just lengthen that thing! Maybe go with a bigger/wider back wheel

@jacksonreid6412 3 жыл бұрын

I’m an OG subscriber, but I haven’t watched KZfaq in a while. I just want to say that this channel has come a very long way since the last time I was here.

@waynepadget4501 3 жыл бұрын

Hello from Queensland Australia, Isaac, you and John, need to make that cart much longer so you can fit in it, without it looking like the gocart got shrunk in the wash, before you rode it. Also get rid of that single drive wheel and put a live axle on it, before you or John hurt yourselves majorly downstairs, trying to get traction with that single wheel drive, OUCH!! THAT'S GOTTA HURT.

@manyman9890 3 жыл бұрын

I just bought a 60 streaker go kart, lots wrong with it but glad I got it and I’m excited to rebuild it.

@wendellscustomcycles6335 3 жыл бұрын

I have been a long time subscriber. I just recent had this same issue with a 2 stroke and my own 4 stroke. Once i either blew out the filter or replaced it and maybe fuel lines if it continued was the only way to stop it

@arizonanative2422 3 жыл бұрын

A long time ago I went to an outdoor small theme park that had those type of go carts, somebody made a bunch just for that reason. Crazy!!!

@mystafrawzt 3 жыл бұрын

Most laughs of the new year! Thanks guys. Awesome as always

@troydennis9449 2 жыл бұрын

Funny how Ike flips all karts. And John mini bike slide outs. You guys are awesome love watching. Cheers

@ozmanozgood856 3 жыл бұрын

love the pedal extensions mint!🤣

@themoelman 3 жыл бұрын

22:50 there's your straight edge for frame building - big black line on the plywood! epic!!!

@brettheffelfinger10 3 жыл бұрын

I'd love to see a kohler v twine on this go cart would hall ass 24hp thing would be insane

@gmandubbs9589 3 жыл бұрын

you guys are great i watch every video you guys make

@Btseifert81 Жыл бұрын

Wish i could like this a million times that was great

@blodhgram373 3 жыл бұрын

loved the rope pedals LOL, stretch it and live axle!

@ChristopherHayniedd980 3 жыл бұрын

I love these type of videos.

@tommyanderson3560 3 жыл бұрын

John, ike. Let me say this again. When you do bearings in wheels. The proper way to do it. Find a pipe that fits your axle shaft and measure the inside width between the bearings and cut a spacer to keep the bearings from ever being overtightened. Actually doing this will help you keep bearings longer

@timothydemarco3525 3 жыл бұрын

Love the video content John and Ike

@edwardweisenburg16 3 жыл бұрын

Oooohhh snap !!!!!! Jan dong to the nads.

@adamwhite3584 3 жыл бұрын

Rope extensions I'm dying that's great. Motivated...

@drewlear1585 3 жыл бұрын

Since you have to replace the floor stretch the frame so it's comfortable.

@garysummey8228 3 жыл бұрын

I was born in 1970. I purchased a used go cart from my find around 1981 that looked like that cart. It had a 5hp Brigs. Same red frame and a black with white stipe set. I know that’s not the same cart but same style.