50+ Hour TBI Update | Best mods for your 2025 TBI?

50+ Hour TBI Update | Best mods for your 2025 TBI? | 2024 TX 300 Review

Рет қаралды 1,828

Күн бұрын

My 54-hour update on the 2024 TX 300 (the cross-country cousin to the KTM XC 300 and Gas Gas EX 300). Has it outlasted the initial hype train? What are the best parts of KTM's new TBI generation? What are the worst parts? Plus, what should you do to your 2025 (if you can afford one 😅)?
TBI Hype Train? | First Impression | 2024 TX300 Review • TBI Hype Train? | Firs...
Is the AT82 Worth Over $200? | Dunlop AT82 Review | Part 1 • Is the AT82 Worth Over...
IRC M5B EVO Review | 2024 TX 300 • IRC M5B EVO Review | 2...
Check out the Taco Moto fix for the TBI fuel tank here (unaffiliated): • INTRODUCING THE ALL NE...
00:00 TPI vs TBI
02:11 Tires
02:34 (Likes) Easy to Work On
02:43 (Likes) Fork Update
03:15 (Likes) Controls/Levers
03:51 (Likes) Airbox + Seat
04:06 (Likes) Shorty Pipe
04:10 (Likes) Frame + Rider Triangle
04:37 (Dislikes) Grips
05:01 (Dislikes) On/Off Switch
05:22 (Neutral) Spark Plug Access
05:27 (Fail) D.I.D. Spokes
05:40 (Fail) Hydraulic Line Rubbing
05:58 (Fail) Chain Guide/Guard
06:11 (Fail) Fuel Tank
07:17 Bike Build Details
08:38 Must-Have Mods for 2025

Пікірлер: 15

@portmod797 11 күн бұрын

I would argue that the TacoMoto fuel pickup is a less than optimal solution. The tanks IMS is molding to accept the previous generation fuel pump assembly is the best solution I've seen. HATE the stupid tank setup on my '24 TE 300. Otherwise, it's a fantastic bike.

@c_wilder 18 күн бұрын

Looking to pick this one up as my next bike. Thanks for the awesome review.

@kevinmoto8745 19 күн бұрын

Great Review! I’m at about 19hrs on mine. First ride bent and cracked a radiator, right side. Replaced it and added bullet proof guards… bent the left one this weekend with the guards. I’d add… braces are better than the BP guards.

@podpocalypse9817 19 күн бұрын

I had the BP brace + guard on my Sherco, those are indestructible. But so expensive 😓

@Endeavor_666 18 күн бұрын

Hey man, good review. I have a very similar setup, but I have the TE300. Best feeling bike I’ve ever ridden by far. One thing of note, you might consider getting a skid plate with an integrated pipe guard. Motoes makes a great one, that’s what I have on my bike. Happy trails!

@podpocalypse9817 17 күн бұрын

I should get a pipe skid before I finally put a dent in it 😂I've gotten very lucky at 50 hours. I'll check that one out. Their torque pipe looks pretty cool, too

@natefenn3218 16 күн бұрын

In about a year or so I hope to get a TSP head and the ERM for my 24 xcw, I can't wait to hear what you think when you start messing with it yourself!

@podpocalypse9817 16 күн бұрын

Thanks, dawg - should be picking it up *very* soon, once South Bay Moto is back from vacation. So many people love it.

@allen-lp1yu 6 күн бұрын

Did the you blow out the bottom of your crank???

@podpocalypse9817 Күн бұрын

Haven't had any issues on this bike yet; I was referring to people with the 2023 models, where it was reported that was happening.

@jamesking4225 20 күн бұрын

How is the vibration from the motor

@podpocalypse9817 20 күн бұрын

Non-existent. KTMs have the best counter balancer from all the bikes I've been on.

@jamesking4225 20 күн бұрын

@@podpocalypse9817 thanks for the info

@jimmymurcia4336 20 күн бұрын

In my 2024 TBI the tube that connects the two radiators through the frame gets loose when you hit the radiator, for some reason the tube just fits and nothing secures ir…. There was abetter system in my 2020 tpi

@podpocalypse9817 20 күн бұрын

That's weird. Is that without rad guards? This bike has been on its side a couple times but no radiator hose issues. My 22 poked a hole on the left side, which was a notorious issue from being too close to the engine case.