$500 Junkyard Supercar: Air Intake and Driving Light Challenges! (Project Jigsaw #36)

Рет қаралды 51,501

26 күн бұрын

Download the FREE Upside App at upside.app.link/crucible to get an extra 25 cents back for every gallon on your first tank of gas.
This week we continue Project Jigsaw, our 1960's inspired supercar project based on a Porsche Boxster. We have a handful of challenges and a huge problem. We 3d print hammer forms for the aluminum metal shaping, and also buy driving lights for the car. Come along as Tony and Ryan problem-solve the complex engineering behind this project, and take jabs at each other all along the way!
Merch: www.cruciblecoachworks.com/
RYAN10 for 10% OFF anything on www.eastwood.com/
Revopoint Scanners including our MIRACO 3D Scanner: bit.ly/3vMkeGF
DISCOUNT CODE: REVOPRCRUC
#vintage #porsche #racecar #hotrod #restoration #fabrication #v8engine #3dprinting

Пікірлер: 105

@CrucibleCoachworks 25 күн бұрын

Download the FREE Upside App at upside.app.link/crucible to get an extra 25 cents back for every gallon on your first tank of gas.

@zeemanjr 25 күн бұрын

This thing would look sick with 928 pop up headlights.

@kruleworld 24 күн бұрын

if something is free, then YOU are the product. this is how much your data is worth.

@JonFukuda 25 күн бұрын

The “No Compromise” mindset is key. I love that you don’t back off the hard decisions- that’s what separates good from great… go get it!🔥🔥🔥

@commonsense7754 25 күн бұрын

Say it with me Alu-mini-um 😂😂😂

@CrucibleCoachworks 25 күн бұрын

🙃🙃🙃

@zeemanjr 25 күн бұрын

NOOOOOO it's alooooominum

@OldNumber20 25 күн бұрын

The original is alumium. The guy changed its name twice. Aluminum was the second name. Aluminium is the last name.

@tomcoryell 25 күн бұрын

Has anyone known someone who says a-loon-a-mum?

@rustom1981 25 күн бұрын

Alolomonumnum 😁

@charlesgraham9954 17 күн бұрын

personally, i think it looks great, the body lines are not ugly, simple is best in my opinion. defiantly sporty looking. keep up the hard work guys. people do appreciate it.

@godskiller27 25 күн бұрын

We call the kimball penetrating spray “the smelly good good” at my shop

@CrucibleCoachworks 25 күн бұрын

I love that. 🤣

@josephlemieux5981 25 күн бұрын

She’s coming along, and love the no compromise approach!

@Sixxoh66 25 күн бұрын

More great work. You guys work very well together. You both have some great skills. Thanks for sharing your build and shop.

@CrucibleCoachworks 25 күн бұрын

Thanks!

@WilliamAlexanderMilne 15 күн бұрын

Hi Guys, just wanted to say I love what you guys do, brilliant content and even better craftsmanship. Binged watched project jigsaw the last few days and it's awesome! I'll be watching from across the pond! 🇬🇧

@aaronburratwood.6957 25 күн бұрын

Yall are my alarm for waking up Saturdays.

@Cubanb407 25 күн бұрын

Dude these things happen in designs/builds good choice not compromising. Love the content whether it be a step forward or back. In the end it’ll be great

@mattluckeydotcom 18 күн бұрын

Love this channel! When I was a teenager, I would draw 30 Porsches a day. I remember seeing the Boxster prototype a few years before production. One thing would really help you is if you print out headlight and tape them to the car to design on the fly. The car is really looking great!

@juicedstang999 23 күн бұрын

Really coming along awesome guys!! I see the "panel shop" guys @ my facility do this every day on the hand made English and Italian restorations but, you guys make it look more interesting to watch..

@chrismichaelyoung 25 күн бұрын

It might feel like you've wasted time, but it would have taken a lot more time and effort to make a hammer form by hand. And now you know your process for 3D scanning works, and you still have to print out the other side anyway. That's the best part about 3D printing is that it doesn't take any effort to actually make the part, just designing it. Sure, it would've been nice to have it be correct the first time and you feel like you've wasted time, but I think we'd all rather see you make the car you want to make, even if it takes more time.

@aaronburratwood.6957 25 күн бұрын

It’s like watching Michelangelo carve David here with your piece of art. NOICE‼️

@pkuudsk9927 25 күн бұрын

Your show calms me down. Helps remind me that nothing goes 100% all the time. Maybe the forms you made will work out later in the build with any luck. I will be here until the end this is so cool and educational, even for this old dog.

@suecobandito8954 25 күн бұрын

Coolant lines. Place the thermostat nearer the engine than the radiator. To compensate for the travel of coolant temp delta from front to rear. Looking good.

@stephenschofield2836 25 күн бұрын

If the 3D profiles are gonna go to waste, wouldn't it be possible for you to try and router the profile in before binning the units?

@thomasamstatter2744 25 күн бұрын

Sadly thats not working because the walls are just that thin and behind it is just that "structure"-material You can see it at 16:44 ish, not much material there

@Swimbikerunpdx 24 күн бұрын

Great to watch the progress, she's looking awesome. Side note, am I the only one that started to see a "Cars" character emerge when you started carving the air intake into the clay? 😂

@andrewhudson7481 24 күн бұрын

This genuinely is my favourite KZfaq content right now, but... does anyone else see a whiff of "Leucistic Axolotl" in those headlights? Cute, but is it the look you're going for?

@TECsta76 24 күн бұрын

Hey guys sup 👍 Ton of space to play with on the front section.. Believe it needs to incorporate way more feature.. Like bringing in the centre of the front lower spoiler, for the two front thins look? And a 5 vent system which would then have 4 pillars that the spotlight can go into the second from last vent? V S VVVV S V < like that V - small side Vent (to aide downward force) S - Spotlight vent VVVV - large central vent. (Which has the lower spoiler deduction underneath) and emblem.. ☮️

@EternalGamingNet 25 күн бұрын

Great video as always!

@MuShinnen 25 күн бұрын

Eating sugary cereal and watching a new episode of the best show on youtube. Great way to start the weekend.

@gafrers 25 күн бұрын

Great work as always

@MisterFixit69 25 күн бұрын

I showed my wife your car , what the idea was , she said " Ah ,looks a bit like a batmobile.."

@johnbarker5009 23 күн бұрын

I know it's not entirely true to your intention for a '60s style, but IMO you should put a vestigial splitter at the bottom of the nose. It wouldn't have to be big and stick out like a sore thumb, just a little ledge to cut down on the amount of air you're forcing underneath to lift the front end.

@kalei43 25 күн бұрын

Glad you guys took a turn from what you’re doing because that round light just wasn’t flowing with the body line

@bowenwerner3085 22 күн бұрын

can we all agree that the Kimball's Midwest Torq CB smells like pineapples

@Rockhopper1 24 күн бұрын

use the printed forms for the rear lights, they will look cool

@faroironandcustoms6577 25 күн бұрын

Nice!!!! Interested to see how that hammer form works out.

@juliasnyder5591 18 күн бұрын

LOVE IT 🎉

@2blazedinfl 25 күн бұрын

throwing the 3d scanner for no reason was worse that flipping a hammer over the hood for no reason

@TheRealAlpha2 25 күн бұрын

When you started carving the vent into the nose all I could think was "ka-chow!" 😄

@CrucibleCoachworks 25 күн бұрын

Don’t you dare 😫

@someone4you 24 күн бұрын

This is arts !!!

@malhayes4725 24 күн бұрын

Driving lights slightly inboard to the head lights and sunken back. From a curved corner square hole transitioning to a round driving lights. Also recess the grill. A rounded off corner rectangle and higher up. Central to the lower section. Just my view.

@mackenziepm 25 күн бұрын

A slightly Aston Martin inspired shape to the front opening might work.

@bigdadgigachad3042 25 күн бұрын

Looking really sharp

@nickp3173 25 күн бұрын

Love seeing this build. So the end product will be an all aluminum body? No fiberglass or carbon?

@perlindros9784 22 күн бұрын

Lower waist line, tilf the windscreen and driving position will give correct proportions. Now it will look like something out of Disney Cars.

@1one3_Racing 25 күн бұрын

Ryan, are you coming to Australia to help Home Built By Jeff learn the English wheel and shape a new roof for his Ford? Awesome collaboration.

@yglnvbrs 25 күн бұрын

Thats a great video as always, but i dont get the "hammering against the plastic" part, wouldnt it be too weak to hammer against it?

@CrucibleCoachworks 25 күн бұрын

You’d be surprised at how strong 3D prints can be!

@yglnvbrs 25 күн бұрын

@@CrucibleCoachworks will be waiting for the next vid then

@UCanDoIt2Mike 25 күн бұрын

Looks like you printed the hammer form for the Left side of the car, but held it up to the Right side. Love your processes. Thanks for sharing. Mike

@CrucibleCoachworks 25 күн бұрын

Yep! We did that to show the angle of the panel, had to be the opposite side for that to work.

@shplayshiggty7537 23 күн бұрын

I wanna see a group c style build next😅

@Spiritof_76 24 күн бұрын

The front of an Opel GT ... minus the Corvette-like sharp upper fender line... isn't that the look you are going for?

@finalbag858 25 күн бұрын

eyeballing everything seems like a good way to get a lopsided car, very surprised yall arn't doing more cad work.

@drewdane40 24 күн бұрын

Picture pages, picture pages. Time to get your picture pages. Time to get your crayons and your pencils!

@L_RANTA 25 күн бұрын

We missed you in Carlisle today! 😢

@EranAranAriel 21 күн бұрын

A cross between a Ferrari Roma and Lamborghini Miura :) How do you get the panels to be geometrically parallel by shaping them by hand?

@anathimaliwa 25 күн бұрын

Chin up okes 🤙 attention to detail will always payoff.

@melderosa656 24 күн бұрын

What if you use the inner line of the fender to create the opening and use the space between that an the light for a brake duct?

@wmose3694 19 күн бұрын

when you guys get this done you should take it to a 24 Hours of Lemons race and see if you can troll the judges a bit aka the "$500 dollars my ass" population and well betting most of the pit will fall in love with it

@rover213 25 күн бұрын

why not use that 3d printed form and adapt it to make a exaust opening for the rear?

@ashlockett7138 24 күн бұрын

It's probably to late now but you could use a woodworking router to shape the prints you have made rather than printing new ones. Good luck with your build!

@kharder 24 күн бұрын

when you 3d print something usually only the outside 1-2 mm is solid plastic, the inside is a mostly hollow grid to hold the shape. saves lots of time printing and material but it means if you router off the corner there wouldn't be much to hammer against so it's definitely a reprint situation :(

@MustafaKhan-hz5mr 25 күн бұрын

all that and less😂😂😂

@Nikolay_Pikalov 25 күн бұрын

Вы не будете делать площадку под номера на бампере?

@2blazedinfl 25 күн бұрын

form vs shape always seemed backwards to me. you use a hammer form to get the shape you want. you can use a shape cut out of cardboard to match the form you want

@petercook6908 25 күн бұрын

why not use a router with a radius bit to give you the soft edge in about 30 seconds?

@williamjarman7466 25 күн бұрын

Woodworking router with a 3/4 round over bit would do it

@CrucibleCoachworks 25 күн бұрын

Issue is with it being 3D printed: there’s a “shell” of plastic that is solid, but the inside is a hollow grid. So the round-over bit would cut into the grid and it would be weak.

@suchoi61 24 күн бұрын

Hello Sir Please make longer Videos ! Maybe one hour ?

@oggsyunwin9000 24 күн бұрын

Headlights should sit higher up on the hood, like in your clay model/rendering not as the blue stand ins are placed now....

@jeantodt666 24 күн бұрын

What is radius of that planishing hammer anwil? Looks quite flat..

@1one3_Racing 25 күн бұрын

Sorry I'm late. Eurovision. What did I miss?

@rage.exe0205 22 күн бұрын

Y'all convince me Ryan doesnt look like Gordon freeman

@CrucibleCoachworks 22 күн бұрын

Half Life 3 confirmed.

@rage.exe0205 22 күн бұрын

@@CrucibleCoachworks glorious journey of finding the God damn 10mm

@tahustvedt 23 күн бұрын

Add some Porsche 904 to it.

@JustinTrobec 25 күн бұрын

Couldn’t you just use a router round over bit on that 3D printed part so you doing have to start over?

@MrGerd 25 күн бұрын

Why you guys just don't want to take handheld router and route the radius on the printed piece?

@AlexSwavely 24 күн бұрын

@11:15 7.25" span? wow Ryan's hands are tiny. I have a 6" span across outstretched index and pinkie.. 9.5 to thumb.

@CrucibleCoachworks 24 күн бұрын

I gots little bb hands

@shixson957 25 күн бұрын

Hmm Sally Carrera or Lightning McQueen

@thomperkins 25 күн бұрын

Time to grab your crayons and some pencils…

@Iamjasonallen 22 күн бұрын

Captain Kangaroo!!

@tomthompson7400 25 күн бұрын

cant you just grind the corners on the form you have and use that

@troyaschebrock4673 25 күн бұрын

Just file the radius on the form...

@johanneshammers 24 күн бұрын

Please involve any industrial designer….

@stephenschofield2836 25 күн бұрын

Lol, first again

@CrucibleCoachworks 25 күн бұрын

@someone4you 24 күн бұрын

Thanks