57 Chevy 3100 Disk Brake Conversion
Рет қаралды 3,988
11 ай бұрынWelcome to our channel.
Merch - rustedupgarage.com/
@user-cg9ly4wg2s Ай бұрын
You really don’t need power boosters on these trucks! Mine stops with ease without it!
@johnrodgers9877 11 ай бұрын
I find you absolutely hilarious ! You deserve far more subs than VGG ! Once YT starts promoting you , the sky is the limit ,for your channel .
@pillochavez155 28 күн бұрын
ok pero cuanto sali la comvercion a discos me interesa ponerle a mi 3100 57
@forpilo 4 ай бұрын
How much did you charge for the brake swap?
@rickwest2366 3 ай бұрын
I'm wanting to change my 56 truck to dis brakes like you did on the 57. My hold up now after watching your video is spacers. I have the original wheel and want to keep them. How do you feel about using them, Where did you find spacers at?
@donaldbishop7550 Ай бұрын
Not going to happen I tried Wheels wodon't clear calpiers
@rickwest2366 26 күн бұрын
@@donaldbishop7550 what's the lest amount you can get by with using spacers?
@donaldbishop7550 Ай бұрын
Had a lot of problems with this kit Wish the hub & rotors came Pre-assembled studs are to short If you need to add 3/16 spacer Got it to work, but you shouldn't Have to modify or buy new parts
@rickwest2366 Ай бұрын
Thanks for the information, I agree with having to modify, they don't tell you about the problems you will have. I don't mind having to use spacers, if they are not too thick. I believe on your video you said 3/4 spacers is it 3/16 or 3/4. What is the thinnest spacers I can get by with.
@donaldbishop7550 Ай бұрын
@rickwest2366 had to put Rally wheels on used a 3/ 16 Spacer, to clear calipers , lugs Nut were flush haven't a problem Have to install new pads & rotors Been putting it off, for awhile Had a little vibration since new If had to hit brakes hard Got a munchi 4 speed Thar helps Still a old trk you have to drive it
@mikeweldon3092 11 ай бұрын
I have a 98 ford expedition I want a supercharged 5.0 mustang motor put in..
@stevemoore1148 11 ай бұрын
I like cutting, grinding and welding. Will you be my friend? I don’t got many
@user-cg9ly4wg2s Ай бұрын
That relay rod setup looks terrible! Not needed!
@user-cg9ly4wg2s Ай бұрын
It’s called a ball bearing. Not a roller bearing. Learn the difference
Motion Raceworks Official
Рет қаралды 52 М.
Tech Stuff
Рет қаралды 141 М.
Full build of 1957 Chevy truck, step by step ProTouring build by MetalWorks Classic Auto Restoration
MetalWorks Classic Auto Restoration
Рет қаралды 44 М.
WheelsForgotten
Рет қаралды 3,1 М.
Laurenceville Garage
Рет қаралды 68 М.
Shortcut Garage
Рет қаралды 932
3:23 Fabrication
Рет қаралды 528
Гаражанин
Рет қаралды 350 М.
Eidan Sanker / Don’t Touch My Car
Рет қаралды 17 МЛН
тюбик
Рет қаралды 3,8 МЛН