(575) How To Seal Acrylic Paintings With Resin!

No video

(575) How To Seal Acrylic Paintings With Resin!

Рет қаралды 34,118

Amanda's Designs

Күн бұрын

Пікірлер: 89

@amandasdesignsofficial 3 жыл бұрын

Would you like to see more videos like this one?

@barbaraswain1713 Жыл бұрын

Yes I would

@cathylowen 12 күн бұрын

Yes

@reneeharrington3599 3 жыл бұрын

Beautiful piece

@amandasdesignsofficial 3 жыл бұрын

Thank you very much!

@PatrickWilliams-um3ew 2 ай бұрын

Awesome. Very informative!

@amandasdesignsofficial Ай бұрын

Glad it was helpful!

@carolynbrew3770 Жыл бұрын

Looks beautiful Amanda don't see enough of you..Yep mask gloves and I measure also please share more ❤

@amandasdesignsofficial Жыл бұрын

Thank you!

@Archita.3006 6 ай бұрын

Great work .. thanks for sharing deae

@amaliakruse8604 3 жыл бұрын

Muy buen día 😌🎶, ESPECTACULAR 😍!!!!! Gracias Desde Buenos Aires Argentina

@amandasdesignsofficial 3 жыл бұрын

Thank you so much!

@aaaxthelm Жыл бұрын

Yes. It was helpful to me.

@amandasdesignsofficial Жыл бұрын

Glad you think so!

@Hawaii50641 11 ай бұрын

Super helpful, thank you!

@amandasdesignsofficial 11 ай бұрын

Glad it was helpful!

@artdesign9563 4 ай бұрын

I have a question if I have a landscape paintings of acrylics can I add over these paintings resin or should I add acrylics varnish gloss because I'm confused and I don't know what should I add ?

@amandasdesignsofficial 3 ай бұрын

You could do either resin or varnish. It just depends on your preference.

@ranz7157 11 күн бұрын

I have prepared mandala art on cotton canvas but I am scared to use resin . Can I use on cotton canvas

@zippo983 6 ай бұрын

Hi! Thank you! Do you use the torch on every layer? You wait to dry and then do another layer?

@amandasdesignsofficial 5 ай бұрын

Yes I use a torch on every layer to remove air bubbles and yes I wait about 24 hours in between layers.

@lizziebeggimbo 2 жыл бұрын

Very helpful thank you

@amandasdesignsofficial 2 жыл бұрын

Glad it was helpful!

@carolsegal5451 2 жыл бұрын

Hi Amanda, Carol here again. I forgot to mention I also get fish eyes as my painting dries. I clean it carefully first with a wetwipe before applying the resin.. Please advise.

@amandasdesignsofficial 2 жыл бұрын

That sounds like you may be using silicone in your painting to where the resin pulls away from those areas creating the fish eyes. Again, another coat of resin should cover those areas. One coat just may not be enough. If you're still getting that, then you may need to use some flour to sock up the silicone and then wipe it off, or use some soap and water to get the silicone off.

@cathylowen 12 күн бұрын

Do you have a video of re resining a canvas that was uneven drying issues. Do you have to sand the painting before the next coat?

@amandasdesignsofficial 11 күн бұрын

I don't have a video like that but resin is self leveling so even if the canvas and paint isn't even, the resin will even out while it is curing. So an uneven painting won't matter!

@eliyahu8248 5 ай бұрын

tanks

@elizabethhope9614 3 жыл бұрын

How do you keeping dust and hair out of your resin?

@amandasdesignsofficial 3 жыл бұрын

You can cover your pieces with a plastic bin or other items.

@seekingnewhorizons7779 5 ай бұрын

Lovely artwork... congrats ! When you were torching the work, it looked as if the flame was touching the piece; I thought you should always avoid this?

@amandasdesignsofficial 4 ай бұрын

Thank you! As long as it isn't in one place too long it won't burn the resin.

@ashleyl836 3 жыл бұрын

Beautiful piece! Does the weight of the resin make the canvas sag?

@amandasdesignsofficial 3 жыл бұрын

It can, but I try and do a couple of thinner layers so that it won't all settle in the middle.

@jemmaslee5972 Жыл бұрын

Hi Amanda I've just watched your video its very interesting. I haven't been able to find anyone do a video from start to finish with the resin. So the actual taping to the tape removal. My biggest question is when do you remove the tape? In my head I'm thinking if the resin isn't cured when u remove it ull still get drips but if it is cured then won't the tape rip and be stuck under the drips? Xx

@amandasdesignsofficial Жыл бұрын

I remove the tape once the resin is dry. The tape remove the drips underneath very easily.

@Velereonics 11 ай бұрын

i could see certain types of paint reacting with resin under heat and making it cloudy

@amandasdesignsofficial 11 ай бұрын

I've heard that it can become cloudy especially if there is still too much moisture in the paint too.

@yasminfathima5276 2 ай бұрын

If u dont have kitchen torch,what shud we use?

@amandasdesignsofficial 2 ай бұрын

A heat gun would also work.

@margaritaurhan112 Жыл бұрын

Thank you. I loved it. I have a question. Did you prepare the back of the canvas on the back so it didn't absorb the resin?

@amandasdesignsofficial Жыл бұрын

Thank you! No I did not do anything special to the back. The resin doesn’t really absorb into the canvas.

@user-ll6qw3it6g 3 ай бұрын

@@amandasdesignsofficialis the resin also able to be used on wood and more? I was looking for the specific resin for the acrylic canvas paintings but it seems like it’s resin for wood and arts and crafts.🤦🏽‍♀️💯. I need to finish resin for my paintings so they can sell better. And be more effective for purchase. Please let me know.thank you.👍🏽

@PixxiLites 6 ай бұрын

Thank you. How long do you wait for glued items on a canvas until you pour?

@amandasdesignsofficial 6 ай бұрын

You mean pour the resin? I wait a few weeks.

@marielanier9712 3 жыл бұрын

How long does it take for the resin to dry?

@amandasdesignsofficial 3 жыл бұрын

Resin takes 24-72 hours to cure.

@ranz7157 11 күн бұрын

Mam is this cotton canvas

@yasminfathima5276 2 ай бұрын

How do u pour resin on rhinestones, beads etc?

@amandasdesignsofficial 2 ай бұрын

I use it like glue, put some resin on the canvas and put the stones in it. Let it cure and then you can continue to add more resin.

@leahsmith0627 6 ай бұрын

Can i use heat gun instead of torch gun?

@amandasdesignsofficial 6 ай бұрын

Yes a heat gun would also work to remove air bubbles.

@himanshibaisla6289 Жыл бұрын

Hii Amanda...great artworks dear 💫 I wanna ask u that what should i use for a acrylic portrait painting..."varnish or resin"..? (I wanna give that painting as a gift) Which one is the best option to make the painting look good....and fresh for a long time so that the resin don't turn yellowish..! Or can i do both varnish it and then resin ? Please must reply...!

@amandasdesignsofficial Жыл бұрын

I use varnish on some pieces and resin on smaller pieces. Any kind of resin can yellow over time. Varnish should not yellow.

@maryamumar1585 Жыл бұрын

Hi amanda, hope you are well, i applied a topcoat to my artwork, i used acrylic paint with the medium. After the resin coat the colours started to change. How can I prevent from the colours not changing after the resin top coat

@amandasdesignsofficial Жыл бұрын

There is always a chance that the resin will yellow so you may want to use a clear varnish instead.

@RANGOLIMATHUR 25 күн бұрын

Hi the ratio will be 2:1 right?

@amandasdesignsofficial 20 күн бұрын

Hi! No, the ratio for the resin is 1 to 1.

@rosemarydill4670 Ай бұрын

How do you get rid of the drippings on the sides?

@amandasdesignsofficial 20 күн бұрын

I tape the back off and that removes the drips.

@billiedean5914 3 жыл бұрын

Great video! Do you scrape the sides or let the resin continue to drip off?

@amandasdesignsofficial 3 жыл бұрын

I let the resin drip.

@iameternallifedeath8571 2 жыл бұрын

How long after painting should i wait to resin? I live in barbados where is 90% hot.

@amandasdesignsofficial 2 жыл бұрын

Most people say to wait at least 30 days.

@kimjefferson3425 3 жыл бұрын

Did you use your hands do all 3 coats? Does this way work on any size canvas?

@amandasdesignsofficial 3 жыл бұрын

Yes I use my hands for all layers. Smaller canvases are easier to do but yet you can use resin on any size canvas.

@kimjefferson3425 3 жыл бұрын

@@amandasdesignsofficial great!!!!

@flynneugene 7 ай бұрын

is there always two parts to make resin or is there a way that its already mixed so i wouldn't have to buy two bottles?

@amandasdesignsofficial 7 ай бұрын

I believe there is always two parts since the hardener activates the resin. I do not believe there is anything premixed.

@ThenZ6 6 ай бұрын

Is it a specific resin because every tome I do it the canvas absorbs all the resin and it looks like I didn’t even do it

@amandasdesignsofficial 5 ай бұрын

Art Resin is a good brand. I've never had resin absorb into the canvas, that doesn't sound right.

@davidcole769 Жыл бұрын

Morning. Thanks for the video. Just a couple of questions. How much resin did you use to cover the piece and how big is your piece? TIA

@amandasdesignsofficial Жыл бұрын

This is a 10 inch x 20 inch canvas. I don't measure the resin.

@kimhanback1302 Жыл бұрын

I love your beautiful work! How long does it take the resin to cure?

@amandasdesignsofficial Жыл бұрын

Thank you! The resin hardens within 24 hours but takes a few days to cure. For coasters, I let them sit for a few weeks before using them.

@PamelaSConleyArtist Жыл бұрын

Can I use a heat gun instead of the torch?

@amandasdesignsofficial Жыл бұрын

Yes a heat gun will remove all of the bubbles too.

@carolsegal5451 2 жыл бұрын

Hi Amanda, my name is Carol from Sydney, Australia. My problem with resin is - I spread the resin carefully using rubber gloves but I notice when it starts to dry .the resin seems to pull away from the edges. I tape up the sides so the resin does not drip down. Am I doing something wrong?

@amandasdesignsofficial 2 жыл бұрын

Hi Carol, I find that can happen so I normally do two or three coats of resin to get a nice full coverage. I think since canvas can sag, the resin pulls towards the middle of the canvas and doesn't always stay around the edges well.

@carolsegal5451 2 жыл бұрын

@@amandasdesignsofficial Thanks Amanda for your replies. I have not thought of doing more than one layer of resin. Maybe try to sandpaper it down abit and then try again. I always put a large piece of stiff cardboard behind the painting to support it before putting on the resin.