#58 DIY electric board - It's my new beast pt.1

Рет қаралды 314,515

5 жыл бұрын

This video is about #58 DIY electric board - It's my new beast pt.1
E-mail - j3i3s3@gmail.com
INSTA - / kamijuins
MUSIC BY Till - This right here
1.Deck - bustinboards.com/products/spo...
2.Motor - diyelectricskateboard.com/col...
3.Truck - diyelectricskateboard.com/col...
4.Motor mount - diyelectricskateboard.com/col...
5.Truck clamp - diyelectricskateboard.com/col...
6.Motor pulley - diyelectricskateboard.com/col...
7.wheel - www.amazon.com/gp/product/B01...
8.wheel pulley - www.diyeboard.com/drive-wheel-...
9.Belt - diyelectricskateboard.com/col...
10.ESC - flipsky.net/collections/elect...
11.Remote - flipsky.net/collections/acces...
12.Switch - flipsky.net/collections/acces...
13.Battery - hobbyking.com/en_us/turnigy-h...
14.Connectors - flipsky.net/collections/acces...

Пікірлер: 691

@KAMiJUINs 5 жыл бұрын

영상속에서는 순조로워보이지만 변수가 많은 작업이었습니다.시간도 생각보다 많이 걸렸구요. 하지만 처음부터 끝까지 조립해봐서 뿌듯합니다. DIY전동보드를 계획하신다면 이 영상이 도움이 되었으면 합니다 :-) 6:55 에 나온 모터 전선 커넥트에 열 수축 튜뷰가 완전히 감싸지 않았는데 이부분은 완전히 감싸야 합니다. 6:55 This part is wrong. The connection have to be fully covered with a tube. The video looked good, but there were more variables than I thought. And I needed more time than I thought. But I had a sense of accomplishment because I assembled them with my own hands from beginning to end.I hope this will help if someone tries something similar.

@bitmammothOG 5 жыл бұрын

thank you! this is a great build and very inspiring :)

@KAMiJUINs 5 жыл бұрын

@@bitmammothOG Thank you for watching :)

@Laureloke 5 жыл бұрын

This is bad idea to put LiPo under board. Your board has low clirance, so your "off-road" wheels are only suitable for flat road without holes and stones. Looks nice, but not for all roads.

@KAMiJUINs 5 жыл бұрын

@@Laureloke There is no problem in my environment that I usually. But generally you are right. I'll try to change some of parts. It will be made to suit the more general use environment. (Actually, I didn't expect so many people to see this video. And the wheel was used for appearance rather than function.) Thank you for watching :)

@user-ce2dr5vb9y 5 жыл бұрын

How many money u spend on this project. If this a not secret ?)

@adityaaurora9869 4 жыл бұрын

ladies and gentlemen of the jury, you've got to get a hold of yourselves

@lolosolodolo1 2 жыл бұрын

Wow I scrolled past this comment right as it said it in the song. Super surreal feeling to read something that is also background music.

@dangerdave3135 5 жыл бұрын

Ladies and gentlemen of the jury gotta get ahold of themselves geeez

@KUfraskins 4 жыл бұрын

This was extremely well done and helpful to all builders

@KAMiJUINs 4 жыл бұрын

Thank you for watching :)

@Livefreeman 4 жыл бұрын

my verdict of this project, not guilty, good job

@KAMiJUINs 4 жыл бұрын

Thank you so much :)

@thomascoble3741 5 жыл бұрын

That music drove me crazy

@Sailor2752 5 жыл бұрын

Same! It got a little annoying

@stevegek 5 жыл бұрын

But what's the verdict?

@knownuser09 5 жыл бұрын

@@stevegek Verdict fuck that shit music off next time.

@kimbow7216 5 жыл бұрын

AGREED. TURN THAT SHIT OFF.

@augustlee4400 5 жыл бұрын

you better get ahold of yourself

@ritchiemarsteller8884 4 жыл бұрын

That was totally amazing. I am speechless watching this. And all the detail work and effort how you showed everything that's involved. I can't wait for part 2

@KAMiJUINs 4 жыл бұрын

Thank you for watching :)

@ratheonhudson3311 5 жыл бұрын

Beautiful step by step build! Looks great too

@dallaschase1462 4 жыл бұрын

I appreciate all of your videos. I hope to build my first board soon. You've provided so much information in watching all of your tests. It will help me so much! Thank you!

@KAMiJUINs 4 жыл бұрын

No problem and I'm glad I can help you :-) Thank you for Watching my videos~

@leboiffic01 4 жыл бұрын

Hi Kami, I would really thank you for this video, which is probably the most acurated that we can found on the net. With your help, I ordered all parts for my moutain board, based on your configuration and it’s work very well !! There is now more than 1 month that I ride everyday with it, in my little corner of France and it’s really so fun !!! I’m now looking for a method to use 4 x Lipo to extend my maximum distance avoided. 😀 One more time, many thanks for your videos an for the quality of them. Take care of you ... we are now awaiting about the next

@KAMiJUINs 4 жыл бұрын

Merci beaucoup d'avoir aimé ma vidéo. De nos jours, je suis tellement occupé par mon travail personnel. Donc je ne peux pas faire des vidéos pour un moment. J'espère que vous serez toujours en sécurité.

@andrewstang-green3107 4 жыл бұрын

I Love it! I would suggest larger wheels for more clearance to the battery.

@KAMiJUINs 4 жыл бұрын

Thank you for watching ;) and visit.

@tinmant4127 4 жыл бұрын

This is probably one of the coolest and most informative diy e skate builds I have seen. Good Job on just showing us how to do it without all the unessasary repetitive word vomit most DIYers videos have. Good edits as well. You didn't waste time on the video, but I know it took a long time to edit and make everything look clean like you did. I checked out your part 2 on this build as well, and the directness in your cost on all parts with total was great as well. Test ride was great with speed and acceleration as well. Over a big thumbs up!

@KAMiJUINs 4 жыл бұрын

Thank you soooooo much :)

@NamezzemaN 5 жыл бұрын

Nice! I admire your craftsmanship.

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@MonkeyMagick 5 жыл бұрын

You have some good skills there. Well done. Look forward to seeing the next part!

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@erickelly8704 4 жыл бұрын

That's a banging board looks awe-SOME can't wait to see the maiden ride & hear those motors!

@KAMiJUINs 4 жыл бұрын

Thank you for watching ;)

@user-vh6eo3lh3u 5 жыл бұрын

드뎌 기대하던 영상이 올라 왔네요 오랫동안 기다렸습니다

@KAMiJUINs 5 жыл бұрын

아 그러셨군요. 감사합니다~ :-) 즐겁게 봐주세요~

@user-js4yn9zz1i 5 жыл бұрын

또 전동보드 만드셨군요!! 정말 부러워요ㅜㅠㅜ 날씨도 많이풀려서 한강에서 타면 크으,,최고져 얼른 파트2도 보고싶어요 기대되요!!!

@KAMiJUINs 5 жыл бұрын

시청 감사합니다~ :-) 요번은 좀 힘들었어요 ㅋㅋㅋ

@chrisrathjan1501 5 жыл бұрын

Sweet build. I like the boxes they suit it really nicely. You have some good ideas. Thanks for the credit hahaha not at all necessary. I found vibration still gets through but it helps a little bit. That will be so much power! I suggest you get some Lipo alarms. If one cell goes bad you need to know about it. This is going to be epic.

@KAMiJUINs 5 жыл бұрын

Thank you so much for using your idea, :-) and thank you for your suggestion (ºㅁº)=b

@ethanfeng8686 5 жыл бұрын

Great built by using flipsky motor, and flipsky control kit, and my favorite deck. 😀😀

@KAMiJUINs 5 жыл бұрын

thank you for watching :-) and this motors are from Torque board ~ I like this deck too~

@gregorypatzelt6964 5 жыл бұрын

What a beautiful build and what an amazing and simple video. Keep up the great work. Love your deck of choice!!!

@KAMiJUINs 5 жыл бұрын

Thank you for watching~ :-)

@udsmall7306 5 жыл бұрын

Bustins are sweet! I just got a Rayne Rival and am toying with the idea of building it electric...but it's just so damn *pure* as a gravity freerider...

@__proto__.toString 5 жыл бұрын

기다리던 영상이었습니다... 우선 추천부터 하고 시청할게요:)

@KAMiJUINs 5 жыл бұрын

아 그러셨군요~ :-) 즐겁게 시청하세요~

@skraggle 5 жыл бұрын

You did a great job with your build and also with your videos. Very impressive!

@KAMiJUINs 5 жыл бұрын

Thank you for watching and visit :-)

@vinnypal783 4 жыл бұрын

You know what? You make the art of board building look simple enough and you probably got a lot of people off their butts to pursue this one little dream of theirs, I sincerely admire you for the effect you have had on people...your boards are fundamentally sound, and if they were sold retail, I would certainly want to purchase one. I think they would be great for those of us who have owned an evolve maybe, but have not the desire to pursue the DIY route for the eventual upgrade. This board are for those who are committed to the idea of travelling in an Electric vehicle, as if that was the normal thing to do, in the near future.

@KAMiJUINs 4 жыл бұрын

Thank you so much for saying that :) Bro~

@vinnypal783 4 жыл бұрын

@@KAMiJUINs Thank you for sharing your board building with us, I am also a DIY Eboard Enthusiast and am currently in the middle of getting parts for my own beast. I get a lot of inspiration from the boards you build. You are so clean and precise with your approach and your boards speak for themselves!

@UltramaticOrange 5 жыл бұрын

Very clean build. I'm looking forward to the test ride video! You should check out the remote from Hoyt St. Electric Skate. It's a weird design, but very nice to use.

@KAMiJUINs 5 жыл бұрын

Thank you for visit :-) And i saw that a round thing.Thank you for your suggestion.~

@domobrah2671 4 жыл бұрын

Beautiful build my friend! Very high quality!

@KAMiJUINs 4 жыл бұрын

Thank you for watching it :)

@ulmuhide 5 жыл бұрын

님 정체가.. 전기, 기기, 부붐을 고르는 것부터 다루는 디테일까지 못하는게 없네요. 이렇게 다방면으로 다 할 수 있는건 정말 대단한건데. 정체가 뭐예요

@KAMiJUINs 5 жыл бұрын

저도 여기에 관심갖게 되면서 공부했어요, 유튭영상이나 자료도 많이 찾아 봤구요~ :-) 좋게봐주시고 또 시청해주셔서 감사합니다.

@kevinwhite825 4 жыл бұрын

Very talented!! Nice work, super clean

@ShaneCarrigan 5 жыл бұрын

VERY COOL. great job and cool to watch. I look forward to seeing the cost breakdown and specs. Inspires me to do this. I ride an Evolve Bamboo GTX and I am curious about building my own knowing the parts can be sourced and you can craft it your own way :) The only things I wish my GTX had were replaceable batteries and the ability to reverse.

@KAMiJUINs 5 жыл бұрын

HAHA So do I :) Thank you for watching~

@JcXtreme72 4 жыл бұрын

That did come out really clean. Good job.

@KAMiJUINs 4 жыл бұрын

Thank you for watching :)

@kingesk8 3 жыл бұрын

The build is so clean it’s it’s insane

@KAMiJUINs 3 жыл бұрын

Thank you for watching :)

@donmimo2011 5 жыл бұрын

Nice music. Cute dog. Great job. You are a genius.

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@karlstern7877 5 жыл бұрын

As a fellow esk-8 builder and diy-er I can say this thing will out-perform every boosted board and evolve and even my own builds. an fsesc 6.6 and 6380 motors at 12s is more than plenty for racing.

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@zzzul 5 жыл бұрын

Best build EVER ‼️‼️

@KAMiJUINs 5 жыл бұрын

Thank you for watching~ :-)

@cityslick7 4 жыл бұрын

Legit DYI 👍🏼. What kind of flex though with those boxes. Feel like your gonna hit stuff.

@KAMiJUINs 4 жыл бұрын

Thank you for watching :) Now, I've raised the boxes height slightly. video #65

@Snap123S 5 жыл бұрын

Nice build! It kind of looks like my board but you have waaaaay better parts 😅😄 keep up the good work!

@KAMiJUINs 5 жыл бұрын

I saw your DIY board~ Right :-) look quite similar and cool~. too, Thanks mate (ºㅁº)=b

@user-pv8ke6tp1r 5 жыл бұрын

보드 무늬 특이하네요~ 근데 부품들은 비싸서... sd : 까미 귀여움 오늘도 한몫

@anastach1 3 жыл бұрын

this is art mate...good job, i love your style...the board is amazing...keep going

@KAMiJUINs 3 жыл бұрын

Thank you for watching :) and saying that~

@mafu46 5 жыл бұрын

Great build! I think it's sit to low from the ground

@KAMiJUINs 5 жыл бұрын

Thank you for watching :) It's okay where I usually ride, but in other places, I agree with you.~

@spkt0r 5 жыл бұрын

Awesome Video thank you. you made me look forward to building my own.

@KAMiJUINs 5 жыл бұрын

Thank you for watching :) you can make a better one ~

@user-vn8ft9kt5o 5 жыл бұрын

편집도깔끔하고 보드도완벽합니다 ㅠㅠ감동 저도 만들어볼까 생각했는데 이런영상이있어 참 감사하게생각합니다

@KAMiJUINs 5 жыл бұрын

저도 시청해주셔서 감사합니다 :)

@FalconPunch1978 4 жыл бұрын

I just bought a bamboo gtr and it’s awesome but I would be perfectly happy with what you built. Nice work, well done.

@KAMiJUINs 4 жыл бұрын

Thank you for watching :)

@superbinchoi77 5 жыл бұрын

요즘 까미주인님 영상 너무 재밌게 보고 있어요 그리고 전동보드 너무이뻐요 😍😍

@KAMiJUINs 5 жыл бұрын

아 ~ 좋게 봐 주셔서 감사합니다 :-)

@superbinchoi77 5 жыл бұрын

@@KAMiJUINs 😁😁

@Pandadancypant 5 жыл бұрын

Neatest and cleanest diy board I've seen to date. Nice job

@KAMiJUINs 5 жыл бұрын

Thank you for watching and visit :-)

@smglsnk 5 жыл бұрын

absolutely right! the best one so far... and the most beautiful. The whole bulid is inspiering. If and when I make one of my own... I'll do it like this. great job. Sorry for my English.

@KAMiJUINs 5 жыл бұрын

@@smglsnk Thank you for thinking that way :-)

@ujung5683 5 жыл бұрын

오❗️ 그뤠잇 프로젝트였네요👍🏻👍🏻👍🏻👍🏻👍🏻오늘도 잘 봤습니다

@KAMiJUINs 5 жыл бұрын

네네 ㅎㅎ 힘들었습니다 ㅋ

@mikesmith7136 3 жыл бұрын

will the 6380 fit on the atb hangars on your trampa?, I have found a third party that makes mounts to fit the atb hangar. I would like to go with 6380s.

@KAMiJUINs 3 жыл бұрын

Would be nice :)

@mta3562 3 жыл бұрын

Awesome build. I keep coming back to the video. I have couple questions if you don’t mind. 1. Where do you get the inserts that you put in the deck? Why did you chose to the reverse motor mount over the smaller one? Thanks in advance

@KAMiJUINs 3 жыл бұрын

The short one is caused by interference with the deck when a motor with a diameter of 63mm is used. and I bought the inserts from Amazon USA. Thank you :)

@yosefbenyah8732 4 жыл бұрын

AWESOME BUILD 👏🏼 🔥👌🏼

@KAMiJUINs 4 жыл бұрын

Thank you for watching :)

@handdancin 5 жыл бұрын

the threaded metal insert into the deck for mounting the boxes is genius! you could use a forstner bit and the hole would be easier i think

@KAMiJUINs 5 жыл бұрын

I agree with you. I'll buy one, if I have another to use it. Thank you for your suggestion. (I've already made a hole. When making this board) :-)

@miguelmacedo935 3 жыл бұрын

Hi where did you get those black spacers for the trucks so the front wheel doesn't move in the axle?

@KAMiJUINs 3 жыл бұрын

spacer included in the truck set and the thin ring shape of the spacers was added.

@Snap123S 5 жыл бұрын

Cant wait to see some action on that monster!

@KAMiJUINs 5 жыл бұрын

Thank you for Watching :-)

@oliverbass2462 5 жыл бұрын

Cool build! I would grab some metal zip ties for securing those wires in the back, plastic ones tend to wear quickly then snap

@KAMiJUINs 5 жыл бұрын

Thank you for watching with your advice :)

@lassebak6909 4 жыл бұрын

great vid.. doesn't the shock pads work better when between the board and truck instead of bolt and truck? just curious

@KAMiJUINs 4 жыл бұрын

Thank you for watching :) I've tried both, but it's similar.

@lolosolodolo1 2 жыл бұрын

What is the range on this setup. I have 6s lipos sitting around

@AVEJOTV 3 жыл бұрын

Hi kami ... loved this build and Im taking a lot of inspiration from this for my next build... could I ask where did u buy the black wrap u used on the bottom of the deck??¿?? -Thank you and keep up the good work :)

@KAMiJUINs 3 жыл бұрын

Thank you for watching :) and should search for PU sheets on Amazon.

@grasiciel 4 жыл бұрын

Kami this is a great board.

@KAMiJUINs 4 жыл бұрын

Thank you so much for saying that :)

@logicaldistraction 5 жыл бұрын

awsome. good work! want to see you ride this thing :)

@KAMiJUINs 5 жыл бұрын

Thank you for watching :) and I will ~

@ZamTVGeek 3 жыл бұрын

KAMI, the sheet under the deck, where did you get it and what is it?

@KAMiJUINs 3 жыл бұрын

it was an interior film(sheet) and you can buy it from Amazon :)

@EthyoDancehallsongmaker 3 жыл бұрын

Hi kami so if i understood you ride your skate without bms on lipo batteries ?

@KAMiJUINs 3 жыл бұрын

Of course, Lipo batteries can also install BMS and charging ports. But if you don't like it, you can replace it by using a balance charger.

@ericromack9617 4 жыл бұрын

Anyone know what product that black wrap is that he puts on the underside of the board?

@jacobboone568 4 жыл бұрын

did you just go to a nearby hardware store for the plastic sleeves and protection for the motors and esc wires?

@dyb6916 5 жыл бұрын

전 이제야 전동보드 입문했는데 정말 벌써부터 DIY 보드를 도전해보고 싶게 만드는 영상이네요 !! 저도 나중에 까미님 영상 참고해서 꼭 도전해보겠습니다 !!! 다음 영상이 너무 너무 기대 돼요 ㅠㅠㅠ 빨리 보고 싶습니다!!! 한국은 전동보드 영상이 많이 없는데 항상 좋은 영상 너무 감사드려요 ...!

@KAMiJUINs 5 жыл бұрын

아~ 그렇게 봐주셔서 감사합니다 :-)

@dyb6916 5 жыл бұрын

까미 주인님! 저도 드디어 미포보드가 왔는데 전원을 키면 미세한 바람소리가 나는데 약간 팬 돌아가는 소리처럼 나길래 궁금해서 열어보니까 딱히 팬이 보이진 않던데 원래 전원키면 전원부에서 바람소리가 나긴하나요...? 괜찮은건지 걱정되네요...

@KAMiJUINs 5 жыл бұрын

@@dyb6916 글세요? 제가 가진 보드들은 전원이 들어왔을때 소리가 나지 않았습니다. 하지만 제가 모든 보드의 ESC 특징을 아는 것이 아니라서 그 증상에 관해 제가 판단할 수는 없을것 같아요. 보통은 주행을 하면 모터와 ESC부분에 열이 발생하기는 합니다. 하지만 소리가 나는지까지는 저도 확인해 본적이 없네요 ㅡ..ㅡ' meepo 커스텀 서비스에 동영상 찍어서 메일로 물어보는것이 가장 빠를것 같아요.

@dyb6916 5 жыл бұрын

ㅎㅎㅎ답변 감사드립니다 다시 들어보니 전원부가 아니라 모터에서 나는 소리였어요.. 전원을 키면 모터에서 삐- 하는 소리가 나긴하는데 혹시 왜 그런지 아시나요..? 문제가 있나 걱정돼서 일단 영상찍어서 미포본사에 보내긴 했는데 구동중에 사고가 생길까봐 걱정이네요 ㅠㅠ

@yonelaposwa4932 5 жыл бұрын

Thanks so much for the wonderful video man. Out of interest, why did you choose the 170kv motor?

@KAMiJUINs 5 жыл бұрын

Thank you for watching :-) I wanted to use a powerful motor, The first criterion was the size of the motor(6380). In fact, the KV wanted to use about 200KV, but I couldn't find it.That's why :-)

@mafarri12 5 жыл бұрын

what charger are you using for the longboard? and where do you plug it in the longboard?

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)The battery is removed from the enclosure and charged to the balance charger when charging. Because it is not a fixed build yet. (I'm going to change the size of the Lipo battery and the Voltage Current. The BMS and charging terminals will then be installed.)

@byoung-supark5896 3 жыл бұрын

카미님, 영상 감사히 잘 보고 있습니다. 저도 보드DIY중인데요, 영상에 나오는 번데기너트? 규격 좀 알 수 있을까요? 숫놈 볼트는 길이 몇으로 사면 맞나요? M5번데가너트라고 검색해서 사면 될까요? 그리고 플라스틱통 고정하실 때 쓰신 ㄱ자 연결고리는 이름이 어찌되는지요. 거기에 사용하는 볼투 너트 규격 좀 알 수 있을까요? 질문 많이 드려서 죄송해요.

@KAMiJUINs 3 жыл бұрын

M4,M5가 나사와 너트의 지름규격을 표시하는 단위입니다. 인써트 너트와 볼트를 구매하실때 같은 단위로 통일하시면 됩니다. 인써트너트라고 검색하시면 되고 너트의 길이는 사용하실 데크의 두께를 고려하셔서 구매하시면 됩니다. (인서트너트 고정시 에폭시 본딩 필요합니다) ㄱ자연결고리의 경우 ㄱ자꺽쇠라고 검색하시면 될것 같습니다.

@marsbase3729 5 жыл бұрын

awesome build! 👍 😎 👍

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@chrisnavarette6541 5 жыл бұрын

Very impressive. this should have more views.

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@paul-erikhelliste4390 4 жыл бұрын

Hi kami juin s. if i need longer motor sensor wire when i want to connect motors to esc

@KAMiJUINs 4 жыл бұрын

It is quite long when combined motor sensor cable with ESC sensor cable. It almost 45-50cm long. If it's needed longer, you'll have to extend it.

@sillydopeyguy 5 жыл бұрын

Very nice build. I'm sure someone has asked you but I was just wondering how much flex does the board have

@KAMiJUINs 5 жыл бұрын

Thank you for watching :) it's not flex so much for me. (i'm 64kg wight)

@MaVeRiCk77 5 жыл бұрын

Awesome. Great job. I wish I knew how to do all this stuff. My feeble mind is not wired like this so I must buy completes.

@KAMiJUINs 5 жыл бұрын

Thank you for watching, and thank you for saying so :-)

@doglabdogtraining-gus.8873 4 жыл бұрын

Great job

@dinokim3955 4 жыл бұрын

보드 diy에 큰 도움이 될듯합니다. 좋은영상 고마워요

@KAMiJUINs 4 жыл бұрын

네, 시청감사합니다~

@DeliberateConfusion 4 жыл бұрын

amazing build dude!

@KAMiJUINs 4 жыл бұрын

Thank you for watching :)

@user-xb5pk9bq3t 4 жыл бұрын

영상마다 신기하고 재미있었어요!!

@KAMiJUINs 4 жыл бұрын

ㅇㅏ 그러셨군요~ 시청감사합니다.

@tuckyew1 3 жыл бұрын

love your videos, choice of music and your dog! may i ask, if you bought the bustin deck from their site?

@KAMiJUINs 3 жыл бұрын

Thank you so much :) I bought the deck from an offline skateboard shop

@tuckyew1 3 жыл бұрын

@@KAMiJUINs that's great that they sells it offline in your area! Love your videos. They are so detailed

@paul-erikhelliste4390 4 жыл бұрын

I love your videos their just amazing and i very like the boards you made

@KAMiJUINs 4 жыл бұрын

Thank you for saying that :)

@dmayniak 5 жыл бұрын

Nice build, very dangerous! Have fun. My question, where is you get the project boxes? I'm having hard time finding one tall enough,

@KAMiJUINs 5 жыл бұрын

In case of boxes, I couldn't leave any information because I bought it offline. Sorry for that. Boxes size are 22 by 15 by 4cm (8.6X5.9X1.6in) and 15by 11by 4cm (5.9X4.3X1.6in)

@ifrashable 5 жыл бұрын

it looks cool, but please test it on a speed-bumpthe clearance looks very low, and does the board flex?

@KAMiJUINs 5 жыл бұрын

Thank you for visit :-) It's not flexible at all so i used 1/8" pad. And you are right. I have to test it safely.(it's a DIY hahaha)

@Darchful 5 жыл бұрын

Great job and my congratulations

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@aaronvbarreraphotography2740 5 жыл бұрын

Nice build man!

@KAMiJUINs 5 жыл бұрын

Thank you for watching :-)

@yanzodadon 5 жыл бұрын

Your videos make it look easy to enjoy the simple things in life. I like watching your videos. Why did you choose the flipsky ESC over the focbox unity?

@KAMiJUINs 5 жыл бұрын

Thank you for watching and visit every time :-) Because I ordered Raptor 2.1 last December.

@MaVeRiCk77 5 жыл бұрын

@@KAMiJUINs 🤣

@renars1480 5 жыл бұрын

Do A test run, and it seems like ther is litle space from batarei to graund, othervise loks sick! Good job man!

@KAMiJUINs 5 жыл бұрын

Thank you for watching :)

@NardelliFilmesOficial 4 жыл бұрын

Hey kami , How is it Fsesc unit doing ? im thinking about getting one of theese to use with 2 190 kv motors in my new build

@KAMiJUINs 4 жыл бұрын

My FSESC6 still have working well. And I want to tell you that you should use a better remote controller than I used.

@NardelliFilmesOficial 4 жыл бұрын

@@KAMiJUINs cool , Ill search about a new tipe of controler , thanks bro

@Pootski302 4 жыл бұрын

Hey Kami! About the vesc tool, for your computer, did you have to download any drivers or any COM ports to your computer to recognize the vesc? It seems I’m having issues with my computer connecting to the vesc. I don’t know whether it is the cable (even though it came with the flipsky vesc) or the computer..

@KAMiJUINs 4 жыл бұрын

Well, I used a Windows version computer. And there was no problem. Shouldn't you make a video about the situation and contact Flipsky?

@Pootski302 4 жыл бұрын

KAMi JUINs I seem to have made a noob mistake. I tired using different cables and it ended up working on a windows 10 computer. Thanks for the reply though! Keep up the awesome videos, love your work!

@LordHaehnchen 5 жыл бұрын

Nice! Sounds like a jetplane when firing up its engines ;) But your soldering technic makes me worrying a bit... Try to heat up the joints first and then adding the solder, like so the solder really flows inside the connection parts and is much more reliable...

@KAMiJUINs 5 жыл бұрын

Thank you for watching :) with your advice.

@termaddict 4 жыл бұрын

Hi kami, can you please provide a link for the type of terminals you soldered to the ESC (6:42)? Thank you very much. Great videos!👍🏽

@termaddict 4 жыл бұрын

Also, if you could recommend a charger and BMS for this setup.

@KAMiJUINs 4 жыл бұрын

Thank you for watching :) All the parts links are under the description box. And I used a balance charger instead of a BMS. I tried to install a BMS, but it was difficult to find a good BMS that supports the 12s battery.

@iammeditating2333 5 жыл бұрын

Nice build!

@KAMiJUINs 5 жыл бұрын

Thank you for watching and visit :)

@EthyoDancehallsongmaker 3 жыл бұрын

Result of batteries is 12s 12ah or 12s 6ah when connected in parralel ?

@KAMiJUINs 3 жыл бұрын

Serial Connection - 12s 6.6ah Column Connection - 6s 13.2ah

@user-yl4fx2jr4d 5 жыл бұрын

와....완전 기성품급이네요 ㄷㄷ 금손👍

@KAMiJUINs 5 жыл бұрын

그렇게 생각해 주셔서 감사합니다~ :-)

@sunstart 3 жыл бұрын

Hey quick question would a 6384 motor fit 🤔. BTW nice diy electric skateboard love the videos 👍

@KAMiJUINs 3 жыл бұрын

No. This 12in torque trucks can fit max 6380.

@paul-erikhelliste4390 4 жыл бұрын

Kami juins i want to know whats the range for your new beast

@KAMiJUINs 4 жыл бұрын

It around 10miles.

@GadgetInspektor 5 жыл бұрын

Great work and cute dog. But I would definitely attach batteries and peripherals on top of the board. They are protected much better and the ground clearance isn’t compromised. I don’t see the need for using the entire surface for the feet on an electric board though.

@KAMiJUINs 5 жыл бұрын

Thank you for watching :) And I agree with those aspects. But I couldn't give up the appearance of the board in my standards. ㅜ..ㅜ

@winning_tiger 5 жыл бұрын

저도 전동보드를 직접 만들어보고싶어도 문과출신이라 그런지 뭐가 뭔지도 모르겠던데 대단하시네요 ㄷ ㄷ

@KAMiJUINs 5 жыл бұрын

시청해주셔서 감사합니다 :)

@joelund7740 3 жыл бұрын

Great board! What material do you use to cover the bottom of the deck?

@KAMiJUINs 3 жыл бұрын

Thank you for watching :) it was an interior film and you can buy it from Amazon

@joelund7740 3 жыл бұрын

@@KAMiJUINs thank you ❤️

@kevinst.hilaire3249 5 жыл бұрын

Question how come you couldn't use the motor pulley from diyeboard?

@KAMiJUINs 5 жыл бұрын

There wasn't motor pulley that I needed. (8mm shaft diameter with capable of using a keyway and HTD 5M 16Teeth with 15mm Width)

@zackeryward8767 5 жыл бұрын

Hey Kami, how can I get in touch with the Seoul eskate scene? I wanna shred my boosted mini s with some other skaters!

@KAMiJUINs 5 жыл бұрын

In fact, I don't know much But in Korea, the electric board culture is not as active in the city as thought. Laws are still insufficient. And as far as I know, most of Korea's electric board communities are made up of mountain electric board communities with a huge range.