#138

Рет қаралды 53,574

2 жыл бұрын

Music by Nelvian - Indigo (Background Music)
INSTA - / kamijuins
E-mail - j3i3s3@gmail.com
MASSIVE STATOR - massivestator.com/
- FOCBOX UNITY+
massivestator.com/products/fo...
- TITAN-X55 | High-Performance Motor with 15T Pulley
massivestator.com/collections...
Used parts
-Truck kit
flipsky.net/collections/truck...
- Remote
flipsky.net/collections/remot...
- Wheel & Pulley kit
www.meepoboard.com/collection...
- Battery pack (M24 PRO battery $699)
www.ecomobl.com/products/ecom...
- 10 x 22 bearing
www.amazon.com/gp/product/B07...
- Other parts such as hardware and plates are recommended to be purchased in their own country after searching.

Пікірлер: 204

@KAMiJUINs 2 жыл бұрын

This building was not easy because of the new way to make enclosures for the first time using the Aluminum plate. Certainly, it seems difficult to achieve satisfaction when trying for the first time. However, I hope you get the inspiration that you can do it in this way. The ESC (Focbox Unity +), High-performance motors, and motor pulley used in this video were supported by MASSIVE STATOR. massivestator.com/ 이번 빌드는 처음시도하는 엔클로저 제작방법때문에 쉽지않았습니다. 확실히 처음시도하는것에서는 만족을 얻기 힘든것 같습니다. 다만 이런방법으로도 제작할수 있다는 영감만 얻었으면 좋겠습니다. 비디오촬영에 사용된 ESC(Focbox unity +)와 하이퍼포먼스 모터, 모터풀리는 MASSIVE STATOR로부터 지원받았습니다. massivestator.com/

@macncheez1212 2 жыл бұрын

I know its expensive but you could always get a commercial 3D printer to make the housings. Carbon Fiber Nylon with anti static would get the job done I think. Not sure of impact resistance. Might make future projects quicker and give you more size and location options. I plan on printing a board(CF PEEK) on mine in June. (work too much.)

@karlstern7877 2 жыл бұрын

Incredible work, I especially liked the deck, and enclosure fabrication. Curious if the aluminum esc housing will cause connectivity issues though.

@benofficial.0 2 жыл бұрын

i am making one with the 13 inch flipssky trucks , but am using chains instead of belts , great job on the deck looks amazing

@Jason-TheChad-Muska_circa1995 Жыл бұрын

@@benofficial.0 may I ask why the chains instead of belts

@benofficial.0 Жыл бұрын

@@Jason-TheChad-Muska_circa1995 belts kept ripping and slipping from rocks and water i couldn't get 50 miles out of a belt before it wore out or broke , my chains are still going strong

@WillConroy1 2 жыл бұрын

Incredible work man, looks amazing 🙌🏼 A very clean build. Can't wait to see the video of you riding it!

@KAMiJUINs 2 жыл бұрын

Thank you for coming and watching mate :)

@eBoard3R 2 жыл бұрын

*Yes, yes those SUPER wide DKP trucks with that "future board" deck as I call it.* Ever since I found out Flipsky make wider DKP I have been waitin to get closer looks and builds, thank you... with street wheels and beautiful motors, I enjoyed this one a lot! I prefer 8mm axle though for convenience but I can accept 10mm has its purpose. Those motors are 🤩 Those close up shots at the end were stunning. Such a beautiful build, trucks looks so wide though. Lookin forward to the ride footage. Another great video. ⚡👏🏼👏🏼⚡

@KAMiJUINs 2 жыл бұрын

Thanks as always for the comments that you leave after watching the video in detail :) And it's worth making videos because of subscribers like you, Brother lol.~

@sethmcneill5283 2 жыл бұрын

You should definitely create your own custom board building business. People would pay you lots of money! All your projects work well and they are so unique looking. Congratulations for your channel success.

@KAMiJUINs 2 жыл бұрын

Thank you so much for saying that :) But I think it can be fun because it is a hobby. And it's not easy to make the same number of boards that I made by DIY.

@Tyneeboard 2 жыл бұрын

Looks pretty good! Your DIY board is great KAMi！

@KAMiJUINs 2 жыл бұрын

Hi, friend :) Thank you for coming and watching~ Hope you good as well~

@knowledgebyte 2 жыл бұрын

Lovely workmanship. Well done.

@KAMiJUINs 2 жыл бұрын

Thank you for saying that and watching :)

@TheShazstar 2 жыл бұрын

Your videos are so satisfying to watch. Another great build. Let me know when you come to the UK. We can take you on a ride through London

@KAMiJUINs 2 жыл бұрын

Thank you for coming and watching, mate :) I used to live in London. So I'm going to go again someday. See you then.~

@kenschulman-specializedend6061 2 жыл бұрын

Nice!..Man, yr craftsmanship and attention to details are progressing more n more.

@KAMiJUINs 2 жыл бұрын

I also think it's gotten a bit better than before lol :) Thank you for watching~

@Mac_N_Cheez 2 жыл бұрын

Thanks for the videos and creative efforts. Sick builds.

@KAMiJUINs 2 жыл бұрын

Thank you for watching too :)

@dyb6916 2 жыл бұрын

저 데크 만드는 영상 이전부터 봤었는데 얼마 된거 같지 않은데도 벌써 3년이라는 시간이 흘렀다는게 신기하네요 ㅎㅎㅎ 영상 꾸준히 잘 챙겨보고 있습니다 이번 친구도 기대가 되네요 !

@KAMiJUINs 2 жыл бұрын

네 벌써 3년이란 시간이 지났네요 ㅋ 항상 시청해 주셔서 감사합니다 :)

@joelin4676 2 жыл бұрын

Great job! And nice recording equipment, the deck still looks amazing after 3 years.

@KAMiJUINs 2 жыл бұрын

Thank you for watching for a long time~ :)

@FlipskyTech 2 жыл бұрын

Nice and clear video of diy esk8, love it🤙

@KAMiJUINs 2 жыл бұрын

Thank you for coming ~ :)

@tonystark-hu3om 2 жыл бұрын

dang man! You're crazy!! Love your vids.

@KAMiJUINs 2 жыл бұрын

Thank you for loving my videos~ :)

@begg3495 Жыл бұрын

Amazing work!

@KAMiJUINs Жыл бұрын

Thank you for watching :)

@manfrombkk 2 жыл бұрын

Everything you do is Pure Art (and fab as well)

@KAMiJUINs 2 жыл бұрын

Do you think so??? HaHa~ Thank you so much :)

@ryan.2327 2 жыл бұрын

Amazing work on the enclosures.

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@SteveThompson-li2fc Жыл бұрын

Fantastic job.

@KAMiJUINs Жыл бұрын

Thank you for watching :)

@B0A2 2 жыл бұрын

Excellent build love the board

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@johnglover4318 2 жыл бұрын

I look forward to seeing the ride footage and tests of this cool board.

@KAMiJUINs 2 жыл бұрын

It will be ~ and Thank you for watching :)

@jarenkunz7935 11 ай бұрын

That was beautiful.

@KAMiJUINs 11 ай бұрын

Thank you for watching ~ :)

@nineeast8730 2 жыл бұрын

Great deck. Great board.

@KAMiJUINs 2 жыл бұрын

Thank you for watching my videos~ :)

@AbosoluteAltitudes 2 жыл бұрын

Your builds have a nice artistic touch to them, I’m always impressed. I’m getting ready to finish my 5th board; got all the parts except a battery. Just been putting it off as I have an ACL injury that getting fixed in 10 days.

@KAMiJUINs 2 жыл бұрын

Thank you for saying that and I hope your 5th board builds well :)

@MadDonJuan 2 жыл бұрын

You are the true, DIY Legend Bro!

@KAMiJUINs 2 жыл бұрын

Thank you for saying that and watching, brother~ :)

@ryanschulz9893 2 жыл бұрын

great video cant wait to see how it performs

@KAMiJUINs 2 жыл бұрын

Thank you for watching :) haha, But don't look forward to it too much lol~

@Mikeonabus 2 ай бұрын

Thank you

@KAMiJUINs 2 ай бұрын

Thank you for watching too :)

@NoLimitstoRide... 2 жыл бұрын

Top DIY board KAMI

@KAMiJUINs 2 жыл бұрын

Hi, Brother :) Thank you for coming and watching ~

@RanRc25 2 жыл бұрын

Great video!

@KAMiJUINs 2 жыл бұрын

Thank you for watching~ :)

@S62Uce Жыл бұрын

Clean build you make it look so easy 👏😂

@KAMiJUINs Жыл бұрын

yeah, only in the video ~ :)

@user-sz3zw9rl4g 2 жыл бұрын

설명 감사드려요 저한테는 보드가 생계수단이라서 스스로 해보려고 했는데,, 아무래도 혼자서는 못할것 같네요 ㅠㅜ

@srqTagle 2 жыл бұрын

Man that is beautiful!

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@worachart111 2 жыл бұрын

Good job !

@KAMiJUINs 2 жыл бұрын

Thank you brother~ :)

@ratheonhudson3311 2 жыл бұрын

I was holding my breath until I saw the Kami sticker, hehe. This is a Kami approved board! I always love your builds and showcases of issues you faced, like the need for the long bolts.

@KAMiJUINs 2 жыл бұрын

Haha :) Thank you for watching bro~

@infiniteoffset 2 жыл бұрын

Those motors are looking good.

@KAMiJUINs 2 жыл бұрын

Thank you for watching as always~ :)

@joec1324 2 жыл бұрын

Wow that's a very beautiful e-skate ✨

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@lorcosgarage9443 Жыл бұрын

legend says its still on the shelf...

@_Zer0202 2 жыл бұрын

Very good bro, I love the shape and the materials 👏 💪 😊🤙

@KAMiJUINs 2 жыл бұрын

Thank you so much as always brother :) To be honest, I'm not satisfied with the aluminum enclosure so far lol~.

@mcmbass 2 жыл бұрын

Clicked the "like" bottom after 30secs of the video. The craftsmanship here is 👌🏾

@KAMiJUINs 2 жыл бұрын

Thank you for watching~ :)

@jb_terahertz 2 жыл бұрын

So good!!!!! 🔥🔥🔥🔥

@KAMiJUINs 2 жыл бұрын

Thank you for watching :)

@craftycraff7938 2 жыл бұрын

It would be great to see your ride these boards after you’ve built them!

@KAMiJUINs 2 жыл бұрын

It will be ~ Thank you for watching :)

@planckstudios 2 жыл бұрын

Handsome board. Those wheels pop against the wood. I combine a lot of aluminum and wood - you can finish the aluminum w/out much effort - scotch brite pads help dull the surface, but harder to get those larger sections finished consistently. Either way, great to see you using aluminum in the builds. excited to see it on future boards

@KAMiJUINs 2 жыл бұрын

Thank you for your comment and watching :)

@joecoco83 2 жыл бұрын

Now you just have to send me in France !!😁😁😁 Thanks

@KAMiJUINs 2 жыл бұрын

Okay. My PayPal account...lol :) Thank you for watching for a long time~ Merci.~

@MichaelHurdleStudio Жыл бұрын

I had to jit that sub button after watching this video. Grea work.

@KAMiJUINs Жыл бұрын

Thank you for watching ~

@parioceanchicago 2 жыл бұрын

Man, it always seems so easy, it's beautiful. Thank you!

@KAMiJUINs 2 жыл бұрын

Yeah! Only in the video. HaHa~ Thank you so much as always :)

@jetthepanda 2 жыл бұрын

Your builds are always amazing! Jealous of the amount of eboards you have!

@KAMiJUINs 2 жыл бұрын

Thank you for saying that and watching :)

@angelofasanaro1584 9 ай бұрын

Easy buying it

@craftycraff7938 2 жыл бұрын

I would love to see review the Propel Endeavor Pro.

@KAMiJUINs 2 жыл бұрын

I wish I could get a review sponsorship from there, too :)

@tgr3875 Жыл бұрын

Please describe what you need for the electric skateboard, such as motor, wheels, etc. Thank you in advance.

@sullivandamn 2 жыл бұрын

Those look pretty close to the hurricanes trucks. Think I could switch them out? Looking for something with 10mm axles anyways!

@KAMiJUINs 2 жыл бұрын

If you have a couple of tools, it doesn't seem impossible to change. And this truck has 10mm axles. Thank you for watching :)

@tlewis3083 2 жыл бұрын

Thanks for the build. Have you had the opportunity to run the x55 motors from massive stator? I have the bound flash and was wondering what the difference would be between those custom motor from massive stator and the stock motors on my bound flash. Let me know what you think.

@KAMiJUINs 2 жыл бұрын

First of all, the output of the two motors is different. The motor output of the flash is 1500w, while the motor used this time has an output of up to 4000W. Therefore, if the discharge rate of the battery and the output of the ESC support each other, a much stronger torque may be generated. Although the motor size is similar, the difference in output can be seen as the difference between the magnet constituting the motor, the mass of copper wire, and the number of poles. Thanks~

@user-sz3zw9rl4g 2 жыл бұрын

여쭤볼곳이 이곳뿐이라서 댓글로 물어봅니다.. 어찌어찌 모터를 새걸로 구매해서 교체했는데, 어느쪽인지 모르지만 처음엔 괜찮더니, 또다시 리모컨에서 과전류가 뜨는데, 어디서 과전류가 나는지 확인하는 방법이 있을까요? 아니면 보밧을 달았는데 그게 과전류의 문제가 될수 있나요?

@KAMiJUINs 2 жыл бұрын

복합적인 문제로 보입니다. 사용하고계신 보드의 ESC는 이미 출력값이 정해저있는 프로그램드 ESC입니다. 또한 보조배터리를 정확하게 장착하려면 원래 장착되어있는 보드의 배터리와 동일한 셀과 구성방식으로 해야합니다. 만약 이것이 달라질경우 배터리팩의 방전율이 서로 달라지게됩니다. 방전율이 높은쪽의 배터리가 ESC가 갖은 출력값보다 높은 방전율로 전류를 밀어내서일수도 있고, 또한 방전율은 병렬형태일때 증가가 되는데 보조 배터리를 달았던것 자체로 기존배터리와 상호작용을 일으켜 ESC가 허용하는 방전율을 초과했을수도 있습니다. 보통 보조 배터리를 달 경우 VESC나 프로그램을 할수 있는 오픈소스 ESC는 그에 맞게 재설정을 할수 있지만 사용하시는 기종은 그것이 불가능하다보니 과전류로 이어지는것 같습니다. 한가지 더 말씀드리면 그런 불안정한 배터리 상태에서는 화재 발생이 일어날 가능성이 높으니 빠른 조취를 취하셔야 할것 같습니다.

@linaandersson5815 2 жыл бұрын

Fantastic! Should perform amazing. I have a question about the Tynee Ultra. Tynee sells DKP trucks. Do you think you can modify the Ultra and put those trucks on it? Would be great with a fairly strong lite board with DKP trucks. I look forward to ride footage of this DIY board. Thanks

@KAMiJUINs 2 жыл бұрын

Thank you for watching :) And Structurally, I think it will be possible. But one thing I'm worried about is that if Ultra's motor wire length is not enough, it won't be easy to put the motor behind the truck. You should check it first.

@linaandersson5815 2 жыл бұрын

@@KAMiJUINs Ah, yes. That makes sense. Hope I can ask you more questions in the future because you sure seem to have knowledge and have tried so many things. Thank you

@VicenteOrduna31 2 жыл бұрын

Simple and Magnificent.! Mr.KAMI-san, which do u preferred most in riding about overall aspects, a HUB board or a Belt Driven board.?

@KAMiJUINs 2 жыл бұрын

Thank you for watching :) And I still prefer belt drives.

@albertrobinson6018 7 ай бұрын

Been watching and admiring your bills for quite a few years now. That deck you just feel it looks really sick no concave? I've been experimenting with epoxy and hardwood skateboard shapes with concave.

@KAMiJUINs 7 ай бұрын

Please, show it to me when you're done~ :)

@ujung5683 2 жыл бұрын

So cool👍❤️‍🔥😍🌟🤩🐶

@KAMiJUINs 2 жыл бұрын

Thank you so much :) hahaha~

@emil5126 Жыл бұрын

what did ytou use to hold the motor cables that neatly?

@KAMiJUINs Жыл бұрын

It was kind of cable holders

@Mist3Rray 2 жыл бұрын

Another SiK Build! did you use spacers in between the bearings? if so where can you buy them?

@KAMiJUINs 2 жыл бұрын

I didn't use the spacers. but it works well. If you want to buy it, you can find it easily search for an internal diameter of 10mm spacer. Thanks~ :)

@davidmiller4758 2 жыл бұрын

I'm curious, where do you buy your batteries?I'm trying to find a 12s4p that can go 30 miles range and also output a consistent discharge of 80 amps? I can't seem to find that kind of amps anywhere

@KAMiJUINs 2 жыл бұрын

I used is 12s5p. This pack uses cells with a discharge rate of 10C. The link information is in the description box, check it.

@davidmiller4758 2 жыл бұрын

@@KAMiJUINs shame the site doesn't give the specs like size of the battery, I know my new torque board will fit a 12s4 depending on it's configuration. If it's 10amps a cell, and it's a 12s4 does that mean it can do 80 amps continuously? How many cells are in a 12s4? I'm new to diy and this is my first build, your videos are my inspiration lol

@user-sz3zw9rl4g 2 жыл бұрын

우리나라에 있어주셔서 감사합니다 😀

@KAMiJUINs 2 жыл бұрын

별말씀을요 :) 저야 말로 시청과 댓글 감사합니다~

@p0kemon4 2 жыл бұрын

How are the trucks at high speeds? Do they wobble at all?

@KAMiJUINs 2 жыл бұрын

I haven't ridden it yet. You'll see it in the next video~ Thanks :)

@xJayteee 2 жыл бұрын

Hey , with the current Vesc technology , there seems to be more and more vescs with higher voltage tolerances , would you build a board or with your current boards with higher voltages ? E.G , 48volts or 60 volts ? As i'd really like to see what speeds it'll achieve and how it affects the riding .

@KAMiJUINs 2 жыл бұрын

Thank you for watching~ This board is a 48-volt setup. And it can reach faster speed with a higher battery setup and ESC output support.

@xJayteee 2 жыл бұрын

@@KAMiJUINs Would you try more voltage builds ? like 60v , 72v. Those are in electric scooter/ebike territory but would really love to see it in a Esk8 . Trampa makes 100v Vescs .

@oreomarina1773 2 жыл бұрын

Máster muy lindo

@KAMiJUINs 2 жыл бұрын

Gracias por ver :)

@josediaz6246 2 жыл бұрын

Hey you should try to make a custom board using parts from like backfire or meepo for people who are new to diy I think that would be a cool idea to use the motor and esc from backfire but with good batteries and better deck

@KAMiJUINs 2 жыл бұрын

Thank you for watching ~

@badrinair 2 жыл бұрын

beautiful work of art. Love it .. All the parts together would it have cost more than $500 ?

@KAMiJUINs 2 жыл бұрын

Thank you for watching :) I think... more than $1500 :(

@badrinair 2 жыл бұрын

@@KAMiJUINs definitely looks to be more than $1500 . amazing quality and finish. I respect your craftsmanship .

@d3vill3ath3r Жыл бұрын

How strong is the board doing this type of construction?

@KAMiJUINs Жыл бұрын

I don't think it will be able to withstand more than 100 Kg

@d3vill3ath3r Жыл бұрын

Thank you, I think that's plenty and amazing build!

@Zorromlj 10 ай бұрын

👍

@alexgarza5398 2 жыл бұрын

hey! have you ever tried building something like Propel Endeavor Pro? I would love to see it if you could attempt or put your own spin on it!!

@KAMiJUINs 2 жыл бұрын

Well, it won't be easy to get a suspension truck and the drive system. But if I have a chance, I can do it someday. Thank you for watching~ :)

@alexgarza5398 2 жыл бұрын

@@KAMiJUINs good luck thank you!!!

@sidneyeramil974 2 жыл бұрын

What are your thoughts on the motor? I am interested in building my own DIY Esk8 board for under $1200 US.

@KAMiJUINs 2 жыл бұрын

The motor was good enough. But to use it more universally(off-road), I think the larger one would be better than this. massivestator.com/collections/electric-skateboard-motors/products/titan-x84-electric-skateboard-motor

@Mylifestyle1998 2 жыл бұрын

I need electric skateboard Whare can I buy …?

@greensocket3583 2 жыл бұрын

Doesn't the Focbox get warm in that enclosure?

@KAMiJUINs 2 жыл бұрын

It was not edited, but the lower part of the rubber part of the ESC enclosure was cut off. As a result, the aluminum in the ESC enclosure itself became a huge heat sink. This part will be mentioned in the next video. Thank you for watching~

@greensocket3583 2 жыл бұрын

@@KAMiJUINs Is that deck 12mm plywood?

@KAMiJUINs 2 жыл бұрын

Yeah!!!

@shmeet 10 ай бұрын

____________________Doesn't the battery put off heat that needs ventilating?

@KAMiJUINs 10 ай бұрын

It doesn't use that much high output.

@steveshot81 2 жыл бұрын

You could use an aluminum bender but it's big

@KAMiJUINs 2 жыл бұрын

And it's too expensive to buy to use it once or twice! x_x Thank you for watching :)

@srqTagle 2 жыл бұрын

What do you est the total cost of materials to build in US dollars for that board?

@KAMiJUINs 2 жыл бұрын

I don't think I'll know for sure. There's a link to the parts in the explanation box, so please refer to it. Thanks :)

@pixel6173 2 жыл бұрын

the next video he posts will likely be the test ride. he usually puts the total cost of the board in that video

@troywissenbach6242 2 жыл бұрын

I’m curious, what was the total cost with this build?

@KAMiJUINs 2 жыл бұрын

The answer of that is shown in the next video. #139 Thanks~

@ddownbond Жыл бұрын

Here, just take my money. 💰🤠

@KAMiJUINs Жыл бұрын

Thank you for watching :)

@boredCoy 2 жыл бұрын

Massive stator is the former Enertion. Look up that company and its history.

@dontlike7399 2 жыл бұрын

My first thought also. There's some people you shouldn't deal with, i guess.

@RehanKhan_maha 10 ай бұрын

wow

@KAMiJUINs 10 ай бұрын

Thank you for watching :)

@Ihatecabinetmoths 2 жыл бұрын

How fast will it go

@KAMiJUINs 2 жыл бұрын

Based on my calculation, this setup can reach a speed of about 33MPH (54km/h)

@Ihatecabinetmoths 2 жыл бұрын

@@KAMiJUINs would it be a disadvantage to use tenka over the unity ? What if I were to use the 5000w motor with a cheaper esc like the tenka? Would it not be as efficient?

@KAMiJUINs 2 жыл бұрын

I think it'll be okay. Actually, it's enough to mount the Tenka on this board too. However, it was used together because it was sponsored.

@johnpaulbelleza7430 2 жыл бұрын

I miss watching your videos

@KAMiJUINs 2 жыл бұрын

Aren't you watching? Haha Thanks~

@johnpaulbelleza7430 2 жыл бұрын

@@KAMiJUINs I haven't watched your videos for several months haha. But I'm still updated in your ig account

@davidmiller4758 2 жыл бұрын

It's as if you just have all these exotic pieces and parts just laying around

@davidmiller4758 2 жыл бұрын

@whatsapp₊₁₍₆₁₀₎₂₄₉₄₀₉₉ ??

@arielvargas2446 10 ай бұрын

Where do you get your "Helmet Police" stickers? I wanna put one on my nephew's skateboard as a joke

@KAMiJUINs 10 ай бұрын

It received a prototype from a protective equipment company called LazyRolling. It's not available because it's not officially released. lazyrolling.com/

@johnfaustus1 Жыл бұрын

Takeaway for me: those are some awesome work gloves from 3M - what are they?

@KAMiJUINs Жыл бұрын

I'm not sure what the exact name of the glove is

@johnfaustus1 Жыл бұрын

@@KAMiJUINs Found them: 3M Super Grip 200, Nitrile Coated Work Gloves....unfortunately, 3M only distributes them in Korea :(

@philipgreer Жыл бұрын

Do you have a shop in Korea?

@KAMiJUINs Жыл бұрын

I don't have any shops, online too.

@philipgreer Жыл бұрын

@@KAMiJUINs Your DIY builds are so good that I thought maybe you had a store. Love the work!

@savekillqqpsounds8473 Жыл бұрын

i fcking love the deck ngl

@KAMiJUINs Жыл бұрын

Thank you for watching~ :)

@Nashcaster 8 ай бұрын

That deck….

@user-1734 Жыл бұрын

Здравствуйте у вас очень красиво получилось доска можете сказать из какой фанеры вы его делали я тоже хочу зделать красивую доску

@KAMiJUINs Жыл бұрын

Спасибо за просмотр. Я использовал 12 мм толщиной плиткой березы~ :)

@user-1734 Жыл бұрын

@@KAMiJUINs спасибо большое за ответ вы первый человек который привел меня к индустрии електроскейта спасибо вам ещё раз

@Rishu44243 Жыл бұрын

I want it bro

@KAMiJUINs Жыл бұрын

Thank you for watching, bro :)

@jeromemalinge4572 Жыл бұрын

Whoa! Awesome! You got a new subscriber. I built my first one and posted a video. Unfortunately, not even close to your "stuff" 👍

@KAMiJUINs Жыл бұрын

Thank you for watching :) and i hope you to build one as you want~

@umarrauf9331 Жыл бұрын

why do all the youtubers doing DIY have a full factory to make a board in there house !!

@InfiltrateIndustries 11 ай бұрын

Longboards are skateboards, but all skateboards are not longboards. Important part was longboard. This video has only a longboard

@tgr3875 Жыл бұрын

Best video and build ever, Bro pls help my skaerboard ok?

@BlankofMaterial 2 жыл бұрын

Mr Kami Juins is an example of "where there's a will, there's away". Are the front wheels further apart than the rear? If so, does it impact the ride characteristics?

@KAMiJUINs 2 жыл бұрын

Thank you for saying that HaHa :) The distance between the front wheels and the distance between the rear wheels is the same. Pulley fills the gap in the rear as much as the spacer in the front.