Keegan Day views are views about like when I hear someone from Boston or New York

😂

this is one of the best comments on youtube...cheers🍻

Hahahahahaha

Trans running a lot better? My trans is stock, but I’ve been thinking about doing the same upgrades plus the rev max valve body. I was pulling about 10k through the mountains and around the interstate probably averaging 90mph and never got above 170 trans temp on a 3 hour trip, but preventive maintenance and upgrades is always good

@@bobbyb608 my trans stats around 135 when I'm no towing.

@@hardtruth2039 Jesus. That’s awesome

@@bobbyb608 I get 18-19mpg in town and 25-26mpg hwy not towing and 13-14mpg towing my 11,000lb fifth wheel in tow mode at 66mph.

@@bobbyb608 6 extra quarts of fluid in deep pan and no thermostat block stopping fluid from going through the trans cooler. Case brace is great insurance against a cracked trans case.

man i have a 2010 f-150. my dads got a 2018 cummins 6.7 and he just had everything built in it. truck is amazing and hopefully me and you get there someday

@@colbyjones6663 Heck yeah I hope so too. I actually just bought an 18 SS 1LE camaro to rip around in. I still want a diesel some day though

Just need to have a ton of money

Hard Truth what tune are you running ?? I also have 2018 2500 and am tired of def and all the service fees.

How many miles did you have on it when you deleted ? I’m just nervous about the warranty I only have 12k

I also have an 18. I have 54k miles. Looking to tune, not sure yet about egr and/or def system deletes too or not.

@@suarez0111 9k also studded the motor, added fast, deep trans pan, trans case brace,and trans coolant block delete.

Karl Koepplin yea I am just going to leave it all as it is.

Lag is Free well I have weather tech but with all the snow and ice in the winter it’s much easier to clean than try and wipe off salt on weather techs

How much for the delete? Just hit 100k in my 2016 3500.Looking to get it deleted.Im in Missouri.

Andre Williams I done everything on mine for $1800 also make sure you put a muffler on there if not you will get a lot of cabin roar. It still sounds just as good if not better than straight pipe

Full delete

Monster RAM thanks, appreciate a like and subscribe for future videos.

Anthony C thanks, will be upgrading the wheels and tires when these are worn out.

I can’t remember the brand

You should hear it when I’m pulling my trailer and skid steer with trailer brakes on

I have the same kind of muffler, had it straight piped at first but I didn’t like the cabin noise. Yea from Columbia

@@cfudge24 I can’t hardly even hear it running inside the cab with this muffler. I kinda wish I would have straight piped it. But I didn’t want any drone. Guess I’m Glad I did the muffler.

No reply ??

He’s a damn ghost

Yes exactly why do video's when you don't even respond. Another bigheaded egomaniac thinks he's cool cuz he drives a truck😅

Just a level kit on front. Tires are 35x12.50 18

Why is his exhaust shaking like that?

Full delete

austin tabers a buddy of mine owns a diesel shop and does everything in house there. He programs every and removes all the parts. Where are you located?

Sinister diesel is still selling egr deletes, exhaust are hard to find too. Look on Facebook pages, otherwise you're gonna have a tough time. I just went through the same with sourcing parts for my '11 HO

JustFudgeIT 86 I’m located in west Kentucky, and I would be doing all of the work myself I just need a place to buy the parts and tuning

Kyle Boyer I have a shop local to me that say if you are in the “loop” everything is still accessible such as exhaust, so I may be able to get something from them but not positive on that

austin tabers my guy done mine in campbellsville Kentucky, he’s the best around and has everything you need.

Todd Voyles they was on it when I bought it, haven’t looked at the brand.

@@cfudge24 If its not too much trouble when you get a chance would you mind seeing if theres a brand on them? Ive been looking can't find any like them.

Todd Voyles I looked it doesn’t have a name or sticker on it. Must have been factory.

Yea I’m down in Columbia.

Justin Gatewood no I put a flow pro exhaust on it. Don’t do a straight pipe.

I got same set up, 24 highway nd 20 city

It’s just a front leveling kit

@@cfudge24 what size leveling kit and from where I’ve been looking at it for mine too

So never tested it to see how much it gained

Ghetto Garage when you get the wheels and tires done let me know what it looks like.

kzfaq.info/get/bejne/h9Koq66m3Myqdqc.html

This is a video of what his truck sittin like

Marcus Lee I’m sure it can be done there just find a good diesel guy.

I have a 12 as well. Did you do anything yet?

Wheelin N’ Dealin thanks man like and subscribe, take a look at my other truck the walking tall video

Cody Palmer $1800 for everything and unless you are gonna do a lot of pulling and higher horsepower all the time transmission upgrade isn’t needed at the moment. I will do a clutch upgrade soon.

Power_Drive TV so it still shifts pretty smooth? I wouldn’t be towing much other than a 2 horse trailer and a 16 ft trailer maybe 1-2 times a week

Sold it

Roy Cisneros hasn’t really changed much, I just put some fuel treatment in it so see if that helps clean everything out some and I will go through each stage to see if it helps it any.

I have a 2014 Thats 4” straight piped and I get 19 around town

Not much

@@cfudge24 it shouldn’t

Stock 😂

erik pollnow that’s just the type tune you have, I would stay away from those that mess with those sounds

if you have an exhaust brake just tap that button when its cold and wham you get the jet sound.

Eric Frey I will look and see, they was already on it when I bought truck couple months ago.

JustFudgeIT 86 thanks! They don’t look stock size

Eric Frey 295/70/R18 Nitto MT

You send them your Vin and any modifications you have or plan to do on it and they'll write one and send it to you

@@wizard_of_poz4413 Yes sir. I ended up with the AutoCalV3. Got it back up and running great with a tow program. Thank you sir.

@@chrischapman276 so do you pretty much have to use a pc for that downloader

@@wizard_of_poz4413 I went through a "broker" for the purchase of the tuner and the tune itself. The tune is emailed to me, loaded on the "app" on the laptop then plug in the programmer via USB to the computer, load onto it and take it to the truck and load. Pretty painless and easy. The computer keeps record of everything from original program to what ever I purchase. $450 for the delete/tow program. I think adding around 75 horse if I remember correct. I do believe improving torque but not sure with the Aisen trani in mine.

@@wizard_of_poz4413 Not for the truck part of it. Essentially, you will receive the email with the program attached. Prior to downloading it you will install the "app", or what ever they're called for the computers now a days for the proper equipment you're using from the "Autocal" website. (AutocalV3, V2,. etc) Then after that's loaded you will download the program you've purchased from the Email and it will automatically load onto the "app". From there, open the app, input the truck info, plug in the programmer to a usb on the computer, Laptop/desktop/what ever... you won't need it for anything other than transferring info to the programmer. Next is taking it to the truck, plug it in and follow the screen directions to do the flash and loading of the program you purchased. Very simple. Does the work itself. Just check out some informative vids or make sure to follow directions like putting a battery tender/charger on the batteries. It takes a while and the voltage is very important to maintain.

You must live in California

@@cfudge24 No. I'm just stating a fact that tampering with or disabling emissions equipment is a federal crime.

@@joef2171 if people that owned diesels didn’t fix the government screw up we would have even more costly issues. 90% of the trucks on the road today are all deleted.

@@cfudge24 I didn't say the required emissions equipment was a good thing or not. My point was it's not a good idea to admit doing something that's actually a felony on video. Considering how bad the EPA is going after people for removing emissions equipment.

@@joef2171 well there are about a million other videos on KZfaq that actually show you how.