6 Upgrades for the Bambu lab A1 Mini 3D Printer!

Рет қаралды 30,054

Күн бұрын

6 must-have upgrades for the Bambu lab A1 mini printer!
All the STL files and credits can be found here:
lukisstudio.com/7-best-upgrad...
(and yes, i added another one to the list!)
If you find this video helpful, make sure to hit the like button and leave a comment on my videos. This will help the channel to grow and allow me to continue to make videos like this. Thank you so much!
#3dprinting #a1mini #a1miniupgrades #bambulab
📷📹*MY GEARS*
Camera:
🇺🇸 amzn.to/4bRya1W
🇩🇪 amzn.to/3SN3zKt
Main Lens:
🇺🇸 amzn.to/49s24Iw
🇩🇪 amzn.to/49Nqtbg
2nd Lens:
🇺🇸 amzn.to/49o4gRt
🇩🇪 amzn.to/49GNTPA
Dummy battery:
🇺🇸 amzn.to/42NLi4h
🇩🇪 amzn.to/3uNINCr
SD card:
🇺🇸 amzn.to/3wx96gQ
🇩🇪 amzn.to/3uANv6B
Key light:
🇺🇸 amzn.to/49rAbR5
🇩🇪 amzn.to/49hHoTD
Practical lights:
🇺🇸 amzn.to/49qt7Eh
🇩🇪 amzn.to/42O0myN
Mic:
🇺🇸 amzn.to/49s2ej6
🇩🇪 amzn.to/42SWOet
Tripod:
🇺🇸 amzn.to/4bRykX6
🇩🇪 amzn.to/4bL21ZX
Disclaimer:
As an Amazon Associate, I earn from qualifying purchases. Every time you click on such an affiliate links and purchase from Amazon, I earn a small commission at no extra cost to you.

Пікірлер: 47

@DWIT3D Ай бұрын

Awesome ideas! My mini combo is on route to me!! Can’t wait to show it off!! 😊

@Lukis3D Ай бұрын

You are going to love it, i promise you. And have fun with your new printer!

@thenextlayer 6 ай бұрын

Great job, will print some of these out for sure.

@Lukis3D 6 ай бұрын

thanks you!

@phucky0o 6 ай бұрын

Awesome Vid! I've printed 3 of your recommendations already (toolbox, PMS and handle). The toolbox insert is my design and it's crazy seeing it in a video!

@Lukis3D 6 ай бұрын

wow thats great man! and thank you for designing the insert, its such an awesome insert, i love it!

@wekker090 6 ай бұрын

The prints look amazing. nice work.

@Lukis3D 6 ай бұрын

thanks, im impressed how good this printer prints!

@realgalactic 6 ай бұрын

This Looks Really Cool! I will definitely print some of these for mine when it arrives! (Unfortunately I still have to wait until next year for it to arrive)

@patrickd39601 6 ай бұрын

Did you order it without ams?

@Lukis3D 6 ай бұрын

wow thats a long wait. But hang on in there!

@alborzdesign 6 ай бұрын

Amazing video. I'm waiting for my A1 Mini (without AMS) to arrive in a couple weeks. Would love to see more of your thoughts on what you like and don't like about the A1 mini. Also perhaps a bigninner friendly video to the bambu slicer? I'm having a lot of trouble with supports in there for a model I found online.

@Lukis3D 6 ай бұрын

thanks man! any reason why u didnt get the AMS? that wait is goinna be a torture but you’ll gonna love the printer!

@Reazy- 5 ай бұрын

@@Lukis3DI didn’t get the ams, because I mainly print functional Parts. But I saved the money and if i need the ams later, ill buy it second hand. Needed the money for Filament

@troscar 27 күн бұрын

Great video! I bought the A1 mini without the AMS, now that is in sale for about 200€ + some accesories, it's going to be my first 3D printer too! You have a new suscriber here :D

@Lukis3D 27 күн бұрын

thank you for subscribing! Yeah the deal is amazing, you’ve definitely made the right decision! Any reason why you didnt get the AMS?

@troscar 26 күн бұрын

@@Lukis3D well, I didn't get the AMS because of its size and I don't think I will give it too much use

@luigiboselli311 5 ай бұрын

Hi, I wanted to make a fence for A1 bamboo because I have a room at 16°C and I had thought of making the walls with "non-woven fabric" (i.e. the fabric that is put on plants in winter). but without the front wall and the another 3 removable so that the machine can breathe but at the same time have a more or less acceptable temperature for printing. I think the electronics have no problems ps. I will only use pla and petg, what do you think?

@arranwilliams2523 2 ай бұрын

cant wait to get printing again! they should have the new heatbeds shippnig soon i hope (thats what they keep promising so hopefully)

@Lukis3D 2 ай бұрын

yes i’ve heard😊 hopefully you wont have to wait too long!

@drconflict629 3 ай бұрын

Nice video!

@Lukis3D 2 ай бұрын

Thanks!

@BennyTygohome 6 ай бұрын

I'm considering the A1or A1 mini for my first 3d printer. Tough decision. Great video. May I ask, what desk/table is that? It's really nice and looks like perfect work surface. Thank you

@Lukis3D 6 ай бұрын

Thanks! you mean where i put my A1 mini printer on? its actually a stand for my seawater tank 😁

@justinluttmer 4 ай бұрын

Great suggestions. Did you use a variant of PLA or PETG for the parts?

@Lukis3D 4 ай бұрын

i only use PLA as of now😊

@RedOnRye 2 ай бұрын

Hey man, you need to do some work on the audio here. The pops are murder if you have headphones on. Grab a pop filter for your mic, keep it 6-8 inches from your mouth, and stay slightly off axis so you aren't blowing directly into the microphone.

@Lukis3D 2 ай бұрын

thanks for the tips man!

@stuartkorte1642 4 күн бұрын

Thanks. Just order a Mini. Why would you need 2 or 3 plates?

@Lukis3D 2 күн бұрын

your welcome, have fun with your A1 Mini! you can get a smooh PEI plate and recently, BambuLab also released 3D effect plates.

@SneakyJoeRu 10 күн бұрын

How does the handle hold after half a year?

@Lukis3D 7 күн бұрын

doing good so far! Although ive to say that i dont move the printer around that much

@sciencesaves 6 ай бұрын

lol “I don’t want to waste any filament” … you got the wrong printer then 😂

@Lukis3D 6 ай бұрын

oh which printer would you recommend?

@sciencesaves 6 ай бұрын

@@Lukis3D the bambu multi color poop so much. prusa has wasteless filament changing if you want to save filament

@Lukis3D 6 ай бұрын

@@sciencesaves thanks so much for sharing. will check it out!

@cybernetix86 6 ай бұрын

why keep the tie-wrap on the AMS?

@Lukis3D 6 ай бұрын

i removed it already 😁

@blalesnail3098 3 ай бұрын

Please don't use a steel razor blade on a PEI sheet. Plastic ones work just as well and won't damage the surface.

@Lukis3D 2 ай бұрын

i am being very careful when i scrape my prints, and my plates are looking good so far. i tried the plastic ones and i couldnt get inbetween as easily or as cleanly. But maybe i’ll have better luck next time. Thanks for the tips!

@blalesnail3098 2 ай бұрын

@@Lukis3D Strange. PLA prints should literally pop off by themselves after the plate cools down.

@JohnDoe-el5ir 6 ай бұрын

I have A1 mini and I don’t think almost any of these is necessary. For poop collector I use cardboard box. Scraper can be used, I’ve printed it, although on textured PEI better not to use it, besides there is no reason for it. Others unnecessarily, depends what spools you use, all brands I use just fit.

@Lukis3D 6 ай бұрын

yes of course absolutely. But thanks for sharing your thoughts!

@joelamaro4525 2 ай бұрын

I don’t want a 💩y looking cardboard box on my printer table. I like to be neat, tidy, and aesthetically pleasing. 🤷🏻‍♂️