Awesome Job! I will definitely upgrade my truck to a set of these👍🏽

Just put these seats into my 2019 Silverado Custom. Couldn’t have done it without this video, thanks!

Already a sweet truck with a moonroof. You scored!!!!

Man, I’m impressed. I could never go through that many steps

Awesome truck, now a great interior it deserves and you did a great job, enjoyed your attitude your an awesome presenter!!!👍👍👍

Ive been looking for a nice truck like crazy. Right now trucks with leather seats are almost 5k more expensive than trucks with cloth seats. I think i just found a way to save so much money! Thank you 🙏

Wow that’s a lot of work and it looks 👍 great

Nice job! I did this to my 2008 years ago. Great way to upgrade!

Great video. Thank you!

I really applaud what you did great job👍👏👏👏

Looks great I have a 2021 2.7 elevation crew cab and I been wanting to do this to my truck and after seeing your video I’m sure I can tackle this project myself …. Downside is the missing footage to the middle seat/console as that one piece of the interior looked the most daunting. I love the look as it seems oem which I believe the elevation trim should’ve received the leather interior and cloths should only be for work truck & lower trims

Thank you I'm getting ready to do mine

Great video. Thank you for sharing.

Great video my guy. You saved me about a thousand dollars. Upholstery shops are EXPENSIVE.

Very nice. Looks factory. Great job 👍🏻

Awesome job !!

I'm going to do the very same thing in the spring.

Came out nice

Looks like an absolute nightmare. I’ll leave it to the professionals to install mine!

Beautiful!

First, thank you for the video it convinced me to order the set for my Sierra. Suggestions for anyone wanting to buy: 1. The listed price on Ebay is $1,000 now for the black "licorice" set, try to find the "BEST OFFER" seller and offer them $600. You can see in the history that they very recently were selling them for $589...not anymore. My approved best offer was $600 2. You need to make a lot of holes in the covers to make them reach the intended attachment point... and even cut some piece out. Thankfully they use a marker and show where too cut, the holes (for push pins) are not shown. 3. The rear seat bottom does not need to be installed in the same holes, the push pin can make new holes in the Styrofoam anyplace you want. 4. 4:03- Don't remove the plastic caps...the whole thing comes out as a whole. Place a pry tool under the whole insert and pry up at a 45 degree angle then 'shock' it by hitting the handle upwards and the clips release very easy. Just prying requires alot of force. 5. 13:13, front headrests- the plastic piece SPINS out/unscrews. Move the whole plastic cap. 6. 25:10 cut the v-notches into the armrest cover and stretch into position 7. The center console is the nightmare part of this job, you need to tear the whole thing down....this is gonna make alot of you unhappy, it was the hardest part of job. 8. Make you you stretch the cover so that the stitching is on the edges where it needs to be and straight. Overall I like the mod, looks way better than "poverty pack" cloth seats these trucks come with. Its not super hard to do, but it is time consuming. Worth $600? Absolutely. If you are slightly arthritic or have tendonitis, be warned, you may want to farm out the labor.

Great vid

Looks fantastic! That’s above my skill set to do all that. But I would love to do that to my Trail boss it would look great with that add on. Did you end up putting in a wireless charger? Thanks for sharing man!

Nice to see a little know how delivered good looking results. I was quoted $600 to have mine installed. Crazy.

Very nice, I’d love to do this to my car.

I ordered a set for my 2021 Silverado 1500 Duramax. It arrives tomorrow and I'm definitely using this video as a guide! I have the middle jump seat too so this is perfect. Only difference is, I have the hidden storage and armrest in the rear seats so mine will be a little more involved. I plan on using a heat gun to gently shrink down the leather after its installed to get rid of any minor wrinkles and such.

Hey James great install video. How are the Katskins holding up? Definitely want some leather seats that can hold up to my sweaty mtb bum.

How do i separate the top and bottom jump seat like you did that’s the only part im having trouble with thanks

Man... I have some seat covers that just came in but now I really want those ones lol

Great time to put in sound insulation is with those seats out...

are you able to share how you got the clips in the middle of the seats unhooked? Is it pretty obvious when looking at it? Also how did you remove the plastic on the seats?

My friend anyway the cover can be put over the old seats???

Did u have to do all the cut out

The trick is to use a power steamer when putting the leather over the seats. Then it doesn't wrinkle and goes on easy.

Do you just have to cut the holes for the headrest? After you get the cover centered?

Nice the only problem now is this set goes for $1200 not $600. Great video and explanation 👍 Thank you.

this video makes me want to pay a guy to do this!!!!

So how are these leathers holding up?

Hey I want to change mine on my 2023 elevation x31 but I can't not figure out how to order online .can you please tell me how to

Will it be the same for a Chevy Silverado ?

hi I just got my katzkins set yesterday decided to let an installer do it, but great vid I've watched a few but I was surprised that the bulk of the katzkins set is vinyl, the kit was from malaysia, most vids from katzkins show an American facility . the back seat is almost all vinyl the center insert is the only leather the back, the front is mostly leather where you sit the backs vinyl,, but the headrests console and other trim is vinyl. I even called katzkins to make sure they were not fake... katzkins confirmed most kits are made In malaysia for them and there is a lot of vinyl, the price now is 1000$ so I'm a little disappointed. I'm surprised no one mentions this. the first clue was the vinyl smell upon opening the box.

My friend any way I would be able to put my katzkin cover over seats without taking out seats?

27:40 why so many wrinkles on the leather? Is that normal?

Well done on the video editing! I bet that was as much work as the install!

dude i would have considered adding sound proofing to floor board since you had your seats out......more work for sure but since they are out......and yeah seat covers are alot of work......lay the new leather ones in sun for a lil while to soften them up before install.....it does help

i wonder if anyone sells seat covers like this for a 2014 toyota camry because im buying one now but it has ugly tan cloth seats

I wanted to see some red and black interior 😁

That turned out really good. How is it holding up? Any issues?

I think my installer is going to leave the console lid factory, is there a huge difference in the colors? Awesome job by the way.

I just did this to my 19 super duty. Pain in the ass and man are my fingers sore but it looks and feels sweet. My seats came out far easier than yours from what I could tell, less than 10min per seat and that includes the rear as well

I have katzkin in my 2020 silverado crew cab for $750 in ebay. Katzkin is the best 👍

I called that katkin company but they send me to an installer they don't ship directly to me and have to pay way more then 600 how did you get the kit

How well did the original lid of the center console match the replacement katzkin covers?

Great job but it looks like in the video there’s a bunch of wrinkles. Did they smoothen out?

Did the katzkin increase the seat comfort? Were your stock seats heated? If so, how was the heat after replacing the cloth with leather?

HI ive been searching to see what you did with the head rest buttons on the side? Do they remove? thanks

Hello, nice install. Will this void any warranties if I were to get these installed in a certified preowned car?

I have the exact same truck interior , would like the part numbers for your kit, colour and stitch option as well! Do you think the leather quality is good or average?

im about to do this for an f150. Id imagine this particular job is pretty similar regardless of brand. Having done it yourself, do you think it would have been worth to pay someone 200 bucks to just install it, or was it not as bad as you thought it would be. I've gotten mixed reviews from people who have done it themselves. lol. looks great by the way, and its not a Dodge so you're already ahead in life 😂.

I have a 1913 ram truck I would love to have my seats all leather

awesome job dude , to be honest you did pretty good but the air gaps you find are because you did not vacuum seal it its basically a vacuum but hella strong and they use it to make sure its sealed completely

Do you have the storage under the front middle seat? Did it come with both pieces in case you don’t have the storage ? And where did you get it !? I’m hoping this will fit my 21 custom double cab

Did you try to steam some of the wrinkles out ?

Is your stitching on the katzkins seat covers a shade lighter than the oem stitching?

Would you still recommend the katskins or there another company that you would recommend

Great job man. I have been thinking of upgrading but I want to go OEM. Please do an update video on the wrinkles see how that has gone for you.

how well does it hold up with dogs etc?

My elevation has storage boxes in back seat.

Where did you find them for under $600? Looking for my 20 ram and they want little over $900. I’ll do them myself but sure would like to know where you got that deal at?

So nothing about the switch cover removal on the drivers side front seat? That’s where I’m stuck. 14:30 it is definitely not “all the same”.

What’s the difference on these and seat covers from autozone?

how did you get your seat covers? i called them and they said they only deal with dealers

How long did it take you to do all that?

Have the wrinkles flatten out now? That’s the only why I want the professionally installed. I have the same truck and am very interested

Great job... loosk way better the OEM ..

HELLO JR'S , thank you very much for your video. Sorry for the trouble, could you help me please with the steps to buy only the set complete ( front and back ) of the seat covers to my chevy silverado 3500HD 2009, please. I ASK YOU FOR HELP, BECAUSE WE WAS WATCHING THE PAGE OF katzkin AND THEY ONLY SHOW US THE BUY OF THE COVER SEAT BUT WITH INSTALLATION IN SITES AUTHORIZED BY katzkin... AND we want to install the set cover seat (like you did in this video). WE DON'T WANT THE INSTALLATION MADE FOR THEM. PLEASE, CAN YOU TELL ME HOW DO YOU DO TO BUY ONLY THE SEAT COVER SEAT COMPLETE???? PLEASE. i hope you can answer to me soon. Thank you very much! =) (WE LIVE IN U.S.A.)

Theres no hog rings on these seats?

Can You get them shipped to a personal address? I taught they only send them to get installed to a upholstery shop.

How did u get rid of the air bag light once it came on?

Great job. Could you please explain how can I order such leather cover seats online. I mean the seller website.

Will this company install for you and if so would they come to your house?

how did he find that 10mm ?

Very nice. The background music is a bit loud.

They 1k now

Was thinking about a GMC elevation. Leather is not even an option. Being in Canada I am sure they will cost way more than $600 + exchange rate.

I wish the Nissan Titan seats were that cheap

Why are the katskin seat covers for a 2015 Silverado now $1200? Literally double

why so much wrinkles

Why dont just put them over the cloth??

Hey buddy would you sell your stock seat covers my helper got caulk all over mine

I'm looking at a '22 F150 Platinum and the stock interior colors are Butt Ugly. Going one with 1007 miles on it for a steal and I think it hasn't sold cuz of the interior. With the money saved I can replace the interior and still be ahead...

Leatherado

Where in the hell do you get the price for self installation??? I've looks at the sight and they say that it has to be dont by one of their "authorized" installers. Thats bullshit!!!!

Good video, BUT I was disappointed that you didn't have or use the red seats like in you click bait thumbnail.

Getting my truck done right now but it’s way more than $600.00

They are now almost $1,200 in mid 2023. Lol.. local shops will install for $1700-1900 or so.

I wanna get this but pay someone for the labor !

If I try to do that .. my truck will be totaled the same day

nice job.................the music....not so much... try Slayer next time

Looks like a pain in the azz. I'll have someone install it.