$625 Remote Hydraulic Kit for Mahindra 1626. No drilling

$625 Remote Hydraulic Kit for Mahindra 1626. No drilling - 15 minute install

Рет қаралды 9,614

Күн бұрын

Check out the kit at www.tractorinnovations.com/mahindra
This kit adds remote hydraulics to your Mahindra for 1/3 the price of the dealership. You be up and running in as little as 30 minutes with the Plug & Play kit. Everything is included, even the shipping. Over 2,000 satisfied customers are getting more utility out of their tractors with this kit.

Пікірлер: 20

@strokeracp1 3 ай бұрын

I have 2 of Andy's kits going to the rear of my 1626 for top and tilt. All hoses are pre-assembled on the valve for easy installation. Andy also supplied both cylinders. By far the easiest and most reliable remotes I've used.

@deerpathacres4426 5 ай бұрын

Would be nice if it came with the grapple for $595. Then again we are not in 1965. Your kit is simple but functional and priced right. As soon as I convince my wife why we need a grapple, I will be ordering a kit from you.

@dennisstack5652 Жыл бұрын

Love the kit I got from you for my Mahindra 1626. I already had the third function. Install was a piece of cake

@normhowes2975 7 ай бұрын

Have been thinking about solenoid activated front remotes but this might do what I'm looking for. Easier to install for sure and lower cost plus no piecing parts together. Now just gotta find money for the grapple LOL

@gordylee8421 5 ай бұрын

This was awesome

@DBaker-kb3qm 7 ай бұрын

Rather than a push pull knob do you have a handle or lever type control. Thanks

@TractorInnovations 7 ай бұрын

I do! I can do live remoted run from the power beyond port of your loader valve. I don't have as many tractors dialed on on that kit yet, but contract me and we'll see what i can do for you. www.tractorinnovations.com/powerbeyond

@padave29 8 ай бұрын

Hi, Andy. I have a Mahindra 5010 HST Cab. I’d like to run a grapple with it, and maybe some rear implements. Is it the same kit as this one, just with different hose lengths, or something different. Likewise, I don’t see the typical handle selector as part or your kit. Am I just overlooking it? Thanks!

@padave29 8 ай бұрын

Ignore that last question - I watched the video to the end. But how to mount that with a cab?

@TractorInnovations 7 ай бұрын

I have a video of cab installation on a Kubota. The Mahindra cabs don't make it easy, and every one I've done has been a 1-off. I can help you, but it takes some leg work getting the hose lengths and figuring out mounting. Cab install video: kzfaq.info/get/bejne/abx7etR5rbDNZ3k.html

@CD-hc5ds 10 ай бұрын

I have a Mahindra 1626 hydro, i would love to have a top/tilt for the box. Do you have a kit for this? A video would be AWESOME!

@TractorInnovations 10 ай бұрын

Yes, I do double kits all the time. You can have 2 diverters, and you're able to activate either one or both at any given time.

@CD-hc5ds 10 ай бұрын

@@TractorInnovations Any chance for a video in the near future?

@6x9wizard 9 ай бұрын

Do you have a system for an auxiliary for the front, say for a grappler. Would the setup be the same

@vancemoncrief3389 Жыл бұрын

I have a Mahindra E350 -DI and I would like to know can I mount a front-end bucket oh my tractor all it has is a three point hitch in the back I cannot find any information on one

@TractorInnovations Жыл бұрын

Sorry, everything I build I based off of your tractor already having a loader installed.

@tompetrie9107 4 ай бұрын

Can have a kit for a TYM T254 ?

@TractorInnovations 3 ай бұрын

Yes, this works great on TYM tractors. I'll just have you send me picture of your loader control handle, and one of your quick-couplers disconnected, with a good view of the male coupler fitting. With that, I can build it for any tractor.