67 Camaro Front Suspension Rebuild & Disc Brake Conversion

No video

67 Camaro Front Suspension Rebuild & Disc Brake Conversion

Рет қаралды 32,728

2 жыл бұрын

We'll be doing an entire front suspension rebuild & disc brake conversion on this 1967 Camaro. There is new shocks & springs, disc brakes & spindles, and new control arms. Time to put all the new parts on.
Other First Gen Camaro videos:
67 Camaro Pro Touring Build Part 1 - • Video
All original 69 Z/28 walk around - • This Very Rare 69 Z28 ...
Here at ZHP garage, we do it all. Tune in every week for a look into our custom builds, arrays of car shows we attend, general service/how to videos we make, and multitude of races we participate in. We have over 25 years of experience, and can work on anything from the daily commuter, to a custom fabricated roll cage, to a custom Chevy C10!
For behind the scenes action, more look into our builds, and things not shown in the fully released videos:
Follow us on Instagram:
Camera Man: / rhziggy
Master Mechanic: / zhp72
ZHP Garage: / zhp_garage
Give us a like and check us out on Facebook:
ZHP Garage Facebook page: / zhpgarage
#zhpgarage #firstgencamaro #discbrakeconversion #frontsuspensionrebuild #67camaro

Пікірлер: 37

@Poc667 Жыл бұрын

Great mechanic . Not only because your good with your hands but because your good with explaining

@nicokek7761 3 ай бұрын

Love this video! I have the same car.

@lowkey2830 17 күн бұрын

Really good video well done

@cremmenga 2 жыл бұрын

I’m going to do this to my 1967 Firebird, your video was very well done and very informative! Thank you!

@mikecarrington6417 2 жыл бұрын

Must be so nice to work on rust free Cali cars. Very jealous.

@michaelmars4971 Жыл бұрын

I have this planned for this weekend and this video was a HUGE help. Thanks guys!!

@TrueNorthBird Жыл бұрын

Love the video! I'm halfway through the same upgrades but with QA1 arms. The video is a great tool, don think I'd try this with out some sort of You Tube magic. lol. True North Firebird

@Havak37 Жыл бұрын

Hell yeah Brudder. Thanks for sharing the footage!

@johnmilner7603 Жыл бұрын

22:38 From the 1970 Camaro Supplement manual since I have a 70. When you spin the rotor, torque the nut to 12 lbs ft. Then backoff the nut one flat and insert cotter pin. If the slot and pin hole do not line up, back off the nut an additional 1/2 flat or less as req'd to insert the cotter pin.

@michaelanderson4836 Жыл бұрын

Nice car very good work and great step by step explanation and very detailed

@ByGraceThroughFaith777 Жыл бұрын

Sick ride!!

@DLK014 2 жыл бұрын

Good video. thanks for posting. i plan on doing this to my 67. much needed.

@pumasisneros1 2 жыл бұрын

Love the 67! Nice work sirs

@keithcolvin8063 7 ай бұрын

What a beautiful camaro !!!

@robertclark7848 2 жыл бұрын

You guys did not replace the master cylinder & install a proportioning valve ?this camaro had power drum brakes which has no porportion valve ,the distribution block has to be replaced with a porportion valve & power disc brake master cylinder.

@hafablake3599 2 жыл бұрын

Love watching these video 🔥

@patrickjohnson7801 7 ай бұрын

Safety cables are factory. Might should talk to ppc about the proportion valve, just might need to get one for the disk break conversion

@utubota5522 2 жыл бұрын

I replaced mine with brakes and suspension from a 78 olds. This gave me disc brakes instead of the old drums. Replaced the sway bar with a custom made 1.25" bar.

@evolusd 2 жыл бұрын

Don't get all crazy with it 🤣 great vid guys

@johnmilner7603 Жыл бұрын

Don’t forget to breakin (bed them in) the pads 1st before doing any hard stops. There are different procedures online where you go at different speeds then apply the brakes to a certain MPH then repeat.😊

@stevelangworthy9553 Жыл бұрын

This could be the best coil over install video on the net. Just one question though. Are those lower control arms rated to support vehicle weight at the lower shock mount bolts? Are they reinforced? Great video. Thanks!

@angellizarraga6050 2 жыл бұрын

Buen video. Gracias

@nythanorayvri 2 жыл бұрын

So freaking jealous bad ass car. I love the content the jokes that he's gonna throw out on windshield lol

@ZHPGarage 2 жыл бұрын

Haha he was trying to throw me out

@garyjohn2802 4 ай бұрын

Those control arm pockets are not designed to take the stress and impact of a coil over. This is COMMON knowledge of anyone running hard driven car. You will regret it.

@mikegonzalez4469 2 жыл бұрын

Question ? Why would you put stock control arms on a coil over kit. Makes no sense to me . If Your going that far , why not put stronger tubular control arms ? Those coil overs are going to hammer those stock control arms

@jerrodpatterson8938 2 жыл бұрын

Your correct. The stock lower control arms are not strong enough for coil overs. He will find out the hard way.

@rickyjaimes2942 Жыл бұрын

Qa1 reps told me you can use these coil overs with stick control arms

@cameronbittner4971 Жыл бұрын

What's with the proud camaro owner crap. And it's jounce not joust.

@DLK014 Жыл бұрын

what about the proportioning valve? did need to change it due to drum to disk?

@joeseptien2182 2 жыл бұрын

What happened with the jri shocks and coilovers in the previous video?

@ZHPGarage 2 жыл бұрын

That’s for a different Camaro

@AlejandroGonzalez-zi6vo Жыл бұрын

Hello, good morning. If you can send me the description of the coilovers so I can buy them, thanks.

@henryphillips2889 2 жыл бұрын

What size were those rally wheels?

@ZHPGarage 2 жыл бұрын

15”

@craig7350 11 ай бұрын

Thats the wrong caliper. The hose isn't routed like that.

@johnmilner7603 Жыл бұрын

7:06 I know the video is old but I’m sure you have made enough $ by now to afford better lighting. Come on guys.😂 Looks like your using a tiny flashlight.