Love how your hands are in the way of any of the important parts like replacing or taking out the old/new pieces.

Thanks for the inspiration. This job is not hard. It might be helpful to show you putting rubber flanges in tool before installing into TCM.

Listen up people who watched this . Do yourself a favor and order a solenoid body filter plate. He still has his stuck on the solenoid body and Tom assembly. The filter has a bead of rubber which will sometimes delaminate or even RIP apart when separating the valve body. It's the piece with all the oval ports in the video.

I suspect that, like myself, most viewers of videos like these ARE NOT MECHANICS. At best we are intelligent and brave enough to tackle a variety of repairs using excellent video instruction. So when this guy skips over details like how the small white plastic inserts have 3-contact points that need to be aligned properly-it isn’t helpful. Also when he uses the tool to insert that black rubber seals he holds it off camera instead of showing how it has to be placed in the tool so the top edge goes in evenly not crooked, so that it works correctly when inserting the seals into the pressure switch. Of course if he makes these videos for other mechanics I’d like to know who they are so I can avoid them. That’s because I’m of the opinion that a mechanic worth $50+ an hour should already posses this knowledge. But that’s just me. Or is it? Fortunately for me I watch as many videos as I can on a given repair and caught those details in other videos.

Nice video, more instructional this time on showing what you're doing. I have to say you had me laughing when you made the mistake of forgetting the little button the second time.

Bought a 2014 acadia USED but as soon I brought it home on the highway started to shift weird took it to autozone to see what's the code for the engine light and came up the tcm selenoid I'm about to take it a part and already order the rebuild kit I hope that's wrong with that car wish me luck

Somebody buy this guy a pick, to help get them covers out.

I can’t find the kit can you please tell me where you got it? Thank you much!!

Buen día, disculpen la pregunta, hay forma de cambiar solenoides en esa pieza

It would’ve been helpful to say where you got the kit.

Where did you get the kit from ? That would help a lot if you can put it in the description

Definitely sounds like what's going on with my traverse. I think I'm gonna try it myself. Just curious, how much would you charge for this job? Great video

When you put the new seals are the flush with the TCM? Or are the popped out a bit?

I wish you had the camera from other angle so I don’t see the back of your hand all the time!

Hey any chance you can share where you got the kit from? I have a 2013 with the same issue and would rather repair it than buy the whole valve.

did you test the solenoids first? and if you did, was it on the bench or with a scanner?

I think I may have found the kit .(124740-TL30 Pressure Switch Installation Tool Kit Compatible with F/124740-30K, PR SW, 6L45/50/80/90 & 6T70/75) on Amazon

Can you help me to get the repair kit by sending the The link to buy it or the part number

Hi sir. What is the name of the tool by which the piece of rubber comes out. I would appreciate you writing me the name of this tool because I want to buy one via Ebay. with my respect

Where did you get your kit from? great video!

Hi robert where can i buy those repairs kits thank you

Hey mate. I have a 2007 WM Holden Caprice V8 with a 6L80 transmission. Been told the TCM is faulty. Has only 1 forward gear and reverse. Will this repair fix my TCM.

Great video! I have a 2012 Traverse that has codes P0989 and P0872. She bucks sometimes at highway cruising speed. This looks like an easy fix. Do I need to reprogram anything after this or would a simple battery disconnect/reconnect or code clearing be ok?

My 2010 Traverse has the delay when put into drive, and the problem of not up shifting pass 2nd gear every morning. You have to stop and put in park then go or use the manual button upshot to get it pass this issue then move shifter into drive after u get pass 2nd gear. But it doesn't throw any codes...why not? Does it have to throw codes to still be the disc problem?

I have a 10 acadia and I did this to my tcm do I have to use a scan tool to rest anything it has a shutter sometimes when the traney lugs

Hi friend am fro Baghdad I have Terrain 3.6l 2013 SLT .MY TRUCK MOVES VERY SOFT 1st and 2nd and reached rpm 4or 5 to shift the 3rd what you think is it the solenoid or the clutches..it started when I flashed the old oil changed it with new one .thanks waiting for your response.

Excellent job, just why you are fixing that..what was the problem

I got a 2010 chevy traverse and i got all the codes those on the gm tsb So about the pressure switches 4and 5. So doing this repair will fix the problem. Thank you

one of my little plastic piece is missing. The very last piece you remove. Any place to get those?

What are the parts and tools you used ?

From where did you buy this kit and what is name of this kit or part. Your video is very helpful same issue I have with my gmc acadia 2008 but I don't find this kit put link in subscription from where can be order these part

Great Job saved me a lot of time

Great video. Thank you. Is the part number the same for an Outlook XR 2008?

So, you can’t replace the solenoids in these?

You basically know what needs done but the CheapSeat view of small parts doesn’t help. Basically, I watched a video of you doing something. Maybe change camera location? A second camera? Oh, what was the Symptom the customer experienced? What did the damaged something cause? Keep trying! Thanks

Not Arcadia, it's Acadia,

2012 Acadia. My only symptom is that sometimes it takes a second or 2 to get into drive after backing up. Is that the waveplate or the discs acting up?

Essas peças que embaixo do reparo da membrana consigo achar? Perdeu as quatros de plásticos que vai embaixo das membranas

I have a 08 saturan vue xe 3.5 awd, when driving will go to neutral by itself. When this happens it shows no numbers for manual shift. So put in park take key out wait 10 seconds or so put key back in. Put key in run engine off when muanal shows a 1 i know its good and will move and be fine. Have any ideas. Mileage is 145.000. Thanks

i problem on my buick 2009...p0796 code.. pressure control solenoid c is stuck off...

My 2013 GMC ACADIA is vibrating from 2nd shift to 3rd. Is this the problem? Feels like the engine is dying. Great video by the way.

hi dear Rob i am out of the US and i am trrying to find the part number 124740-28K i found on ebay which will cost me 150$ but also find them with 124740-30k number is it diffrent or same btw i have chevy traverse 09 4*4 and do i need the tools to fix them or i can manage with normal tools bec its so expensive

How do you relearn shift points?

I ordered a kit like that from sonnax but they didn’t send the little yellow parts that go under the orange disks. Do you know where I can get those? I can’t find them anywhere

You're hands are in the way.

what symptoms ?? i have problem and code p0700 chevy traverse 2009

Hey Robert do you know the part number of those seals you replaced?

I have a 07 Saturn Outlook that thow up the codes for pressure switches

Is this the same TCM, that’s in my 2011 Buick enclave ?

Nice tips bro

Great video thanks, My question is to get this job done is necessary to take the transmisión down? Or is a way to remove just tHe valve block out? Thanks

where do you buy the solenoids inside the techm? The eyeball are nothing.

What is the tool you are using to make the washer flush??

did you have to drain the transmission fluid??

What kit did you use?

What were the symtoms? Besides the codes, I have a issue cuz the car bucks while driving

Might as well not even have a video. Looks like he zoomed in from the space shuttle

Were can’t order this parts

I have a 2013 GMC Acadia that randomly decides not to shift properly. We had flushed the transmission after it started acting up (no trash/metal seemed to be present) but it's still acting up. What soecific codes would I be looking for it to show if this is the issue? Thanks!

i may need to do this repair but i just bought a new tcm temporary fix and then got the different switch codes this time still no forward gears only reverse. i have 07 saturn aura 6 speed i believe i need to replace 35r clutch wave do you know anywhere i can get this repair done san jose california bay area? 2nd question if my seals are busted where do i buy the kit or screens and the tool you used to seal them?

Hi Rob my name is Alex I was wondering do I have to reprogram the TCM if im only doing the kit for the original TCM from the vehicle that came with the vehicle.

hey what is the pressure witch kit called be cuz I've been looking everywhere for it

what's the part number or where did you get this kit at?

Hi nice video,wanted to know about resetting shift parameters,what is the process for that thanks any help will be appreciated

Where can I find the repair kit

Hi mate i have very similar problem im in uk is there anychance you could give me a link to repair kit for the tcm i can get the solenoids but not the kit to seal it Many thanks

where you buy the parts ?

Would this kit be the right one for Acadia 2010 also? I have same check engine codes with stuck in gear intermediate.

Hello i have different codes p0752 and p0700 on my Outlook. 270,000km on it and the trans fluid drained had no metal shavings in it. Would this fix it? Or do i need to replace the entire techm?

Do you have to replace the filter plate?

i wish the at i wode see you in the you know

All i saw was ur ✋️s

Where is this at on GMC Acadia

wrong installation

Poor video, can't see what's going on and you're breathing awful hard.