your notifications makes my day better.

Who is ready to see this thing with a couple snow bikes in the back?

Thank you for your support and patience on this build! Finishing it in January for sure 🤟

This Ranger deserves the love. It was too well done for a marketplace find to not go all in.

I think making it removable could lead to many exciting things, like someday building a camper for the bed too

I'm ready to see this with some lockers and that 2JZ you've got. It would be an unstoppable riot in the snow.

6x6 needs air lockers on all axles!

Turned out better than i would have expected. Ethan has really developed into a gifted fabricator. That thing would benefit from some lockers though.

Man you guy’s do so many fun, bad ass thing’s! I’m a 36yo disabled man and have been able to do some fun things like riding four wheelers, wave runners (my favorite) and motorcycles before i become I’ll but the thing that I’d like to try is snowmobiling! That looks so amazing. One day though I plan on hopefully getting a used seadoo. Love the content, I get to dream a little. From Walla 2 WA!

Seriously can not wait to haul around our toys in this thing!

You guys are the definition of my dream life

Will always love the fact that you guys still work out of your garage it makes the videos and the content so much better

This was a year ago. Wow, time flies.

Dude’s a helluva fabricator! Awesome work!

Another thing you could add to the flat bed is a bunch of tie off points for straps

I have never seen you work with so much new steel! Very cool design 🔥

Some of my favorite episodes is when you guys revive a build after digging out of the snow 😊

Look sweet with a role cage on the back, storage or large tent 😎. Awesome . 👍

Awesome guys! That would be one badass Sleigh for St. Nick! Merry Christmas 🎄!

My ears heard Ethan say "they call me metal break Lucifer" .. I'm good with that 😈

Awesome flat bed man. The term your looking for is a” headache rack” for the racking that goes behind the cab

love this build i would love for it to be my daily driver lol

You guys are hands down the best! The content is entertaining and well put together. The music is on point. The camera shots, it's just so well done. Thank you for the hours of enjoyment. Happy holidays you guys, stay toasty ✌️

Idaho, This whole time I thought you guys were in Canada from all the snow. :P

Look at mounting led tailights on the flatbed💪🏻strands siberia make multible options of ledbar tailight/brakelight/working light in one housing, ip67/69K rated for abuse🤝🏼

Love seeing ur snow bike footage. Can’t wait to see my dads new snow bike. He has had a buddy building him a custom 500 2 stroke ktm for the last 2 years and I think it’s finally done

I've been so excited to see what direction you guys would go with the ranger! Bed looks amazing.

November of 1996 has this one beat easily. Schweitzer opened a week before thanksgiving with zero snowmaking capability. And we were shoveling roofs all over the county on t-giving weekend. Many buildings collapsed that weekend due to heavy snow load. It was a great year to be a young strong snowboarder, though. In fact, rode Schweitzer on Ocotber 25th of '96, all the way through to July 4th of '97.

Literally my favorite series of videos. I've always dreamed of a 6x6 Ranger. The dream.

I dig the level/speed square track burner for the plasma.

Please post longer videos! Love you all

these videos always get me excited to go work on my own stuff! I LOVE watching your cool builds! keep it up everyone, your team is unstoppable! 🤘👍

Merry Christmas!🎄🎁 Thanks for all you guys are doing.

Here before 90 million comments on Dec 23rd @ 2:38 p.m. CST - 37 minutes after it was released. MERRY CHRISTMAS TO YOU AND YOUR LOVED ONES! STAY SAFE!

Always a good day when grind hard uploads.

Awesome job guys great craftsmanship on the metal work

Monster bike finish.. let's go Boyz!! That's sick and what a great tutorial!!

This is one of my favorite projects. I love all of the mini-vehicles, but this and the e36 yute come very close to those minis

"Certainly not in miniature pink one" has to be the quote of the day!

You guys have the coolest toy's to play with during the winter!

would be awesome to have a flatbed like that, but have like inserts for hauling different stuff (bikes, the boat, engines)! have different cradles that can be slid into rails and locked on ?

Good looking start to your bed

Hey hope you guys have a good winter just started summer here in new Zealand

Nice work guys, always enjoy the channel.

Glad to see more progress on that beast.

You need some air lockers for the rearend’s.

That is hard to believe that is the most snow ever seen sense the 70s there. In Buffalo New York we get dumped over 3 foot of snow all the time. We had 2 storms this year one dumping over 6 foot of snow

Don't forget the mounts on the removable roll cage for the popup tent

This has to be one of the coolest Ford rangers

This truck is so cool. Just driving it around to turn heads is enough.

That "Ooo-ooooo-ooo" is so comical at the end of your dog's "bark". hahaha !!

So this thing has a a pair of independent suspensions but they're both in the back and front end is a solid axle. I bet it handles "uniquely".

I soo want a 6x6... always wanted a duce and a half, I tow trailers out of flood zones to help people who can't afford to pay a tow vehicle to tow them out for the heck of it. It would be soo cool to do it with a duce and a half, problem is the 5th wheel trailer tows would be tricky, would have to mount a hitch on the very rear end and somewhat low. Thanks for making your videos, I enjoy them very much, you give me ideas on how I can do certain things on builds and welding etc.

This project really makes me wanna do tandem drives on my F-350. Lol.

I wish I had a snow-bike when I lived in Wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿. I rode a Honda cb 500 shaft drive All year round, even when it snowd a 1&1/2 ft deep.

I think it needs some attachment sliders for the bed so you can make things detachable like a spare tire mount, rings for tie downs and boat rails for the mini boat and jet skis and stuff and if you cut them in the bed you could still slide stuff like wood and other stuff

I drove home to Missoula this year from Oregon. Been an interesting winter for sure.

This thing is coming out fantastically amazing

I can't wait I love this build

It looks beautiful. You might want to nonskid it. That's going to be so slick.

The music in your videos is getting better and better. The track with horns was on point.

Great work as per usual thanks for sharing it all with us. Hope you have a happy and healthy Christmas and New year

Love this project!! Stay warm out there.

Merry Christmas Everyone,and/or 'Happy Holidays' too. "Over the tree stumps and through the wood.oh how the guys do play...'

Great job as always. Ranger is looking top notch ✌✌

Here in SW Missouri it was -3 this morning. North Idaho temps! 😁 Thanks for the vids! 😎

The 6x6 ranger would be a really sick wrecker.

OK Tough call: Which is cooler: 6x6 Ranger (which your bed work looks legit) OR the snow bike?! Man, superfun toys, keep up the amazing work!

That came out nice. Now you need some kind of ramp. Like a slide out like they have on Uhaul box trucks.

This is a great time to weld some D rings or tie down points to the bed!

This is fantastic!

I reckon one of those hydraulic steering rams with a small secondary wheel instead of the buttons and the arrow would be a better setup

You guys should build an awd snowmobile two driven small tracks on the front instead of skis!

Micro jet boat bed, match the paint and decals on the ranger,,, sickest on the ramp👍😁

You guys are lucky it's only 2 degrees. Im in northeast Ohio and with wind chill it's -30f. Luckily I drive a subie so snow means nothing except sweet skids.

Excited for the finish of this build:)

Great video!!! Don't forget tie down loops/hooks.

Nice skiff of snow you have there.

oh man this is going to be a great video

Y’all and gingium be makin crazy stuff

I love that 6x6 ranger

You need too wrap the truck in the same pink as the jet boat. Lokks awesome

The Little Ranger That Could ✌😁🤘

Super cool and looks like something made in Crossout!

As a fellow owner of the greatest truck eva made, I approve. I know that means a lot to you guys ;)

Such a crazy build, absolutely lovin it!

I would build some ramps for it and some rock slider steps and put a roof rack on it

That bed looks sick on the ranger

Maybe add storage container on the part between rear tires thing. Form and function. Also jet boating on ice.. how the hell that is suppose to work? powder snow...maaaaaybe? but on ice, there is nothing to push, unless you mean there is enough water top of the ice you can stand there while drive the jet boat.. damn that would be trippy.

Currently in a blizzard in Indiana biggest snow storm we’ve had in years. Constant snow since 2 pm yesterday and hovering around a balmy -7 degrees. Should’ve bought that snowmobile before this happened. My friend is selling it for 100 dollars. And old Yamaha 440 exciter. Needs a fuel line.

Love you guys’ videos!

LMAO Bjorn still hates the camera on him. Reminds me of myself.

Them talking about it being -16 at night . me the high was -25 and about -40 for the low and a foot and a half of snow every day

Cool build! like to see a CR 500 with that snow kit!

I love that a word premium became the norm here :D

Such amazing work. Looks bad ass

Merry Christmas to the grind hard crew!

The way he ran into the tree mid shot😂😂

what a cool project, I quite like 6x6s.

you do great work