TT-M57 the best pistol ever... I love it 🔥🔥🔥🔥🔥🔥

I LOVE my CZ 52!!

Sounds like a good journey to be able to reload this ammo.....Nice work and range time.....Good stuff....

Great videos

Well done.

I am emanoured by both of those guns and the round in general. I'll try some of your loads. I've had my CZ52 since 1996. Just got the M57 last year. I have a Harrington unbreakable firing pin in the CZ. I also removed the hammer dropping feature. The trigger pull was much improved on the CZ but what is most important is the trigger sting is gone.

Man you can hear the sound of the metal at the same time of the detonation

Thought you just joined the chrono club Haha. Classic firearms has a great deal on these right now

Nice vid. You mentioned cheap plinking loads a couple times so I thought I would suggest some other bullets that should work just as good but be a good bit cheaper. Berry's makes a 110gr just like that in a plated bullet and Armscor makes a 110gr FMJ, same bullet design as those Speer which is just a M1 Carbine type bullet. Bayou Bullets makes a .309 115gr cast and coated bullet that makes a hell of a load, fun to shoot..they really feel substantial. I've used all those bullets in several Tokarevs (Yugo, Romy, and Polish) and three different CZ52's. Most Tokarevs have around a .310 bore, some as high as .312 from the 10 or so I've slugged. My dad's Romanian is .312. The CZ's usually have a tighter bore around .309. If you find that your accuracy isn't great with .308's you might need to go up to something like the .309 Hornady 90gr XTP, or try some cast bullets. Some will shoot the .308's just fine though so it just depends on your guns. Since they have such a varying bore diameter I use anything from those same .308 110's to .312 cast bullets. A lot of Tokarev ammo uses .307 or even .3065 bullets as in the Privi Partisan...I've never gotten great accuracy out of factory ammo in that caliber. OK for close plinking but not much else. I have no idea why they use such small bullets when the bores are all over .308 from all the ones I've slugged. Edit: Oops I see you did try the 90gr XTPs

Sound Nice 👍

Hey, I was wondering if you know anything about Yugo M57's with no crest on the slide?

Hey KFW, saw videos on making Tokarev brass from 5.56 brass.( NOT 223 ) They cut the neck off leaving 1" of brass. If you have the bullets that would give you your supply of brass :-)) Happy shooting ! This may not be worth all the effort, if the ammo is cheap for you, call it a done deal.

Look like all those will it run pretty good through both of us guns

Can You really use Czech surplus on the Yugo M57? Some say Czech ammo is too hot. What is your opinion? Will it damage a Yugo?

Reloading .Yes. Thanks

H 110 powder might be a bit too slow, but work up your loads and I wish you the best.

Great video. Be careful with surplus Czech ammo, many batches of military surplus was specifically loaded for submachine guns, and are really hot rounds. A steady diet of that in a Tokarev may cause over pressure problems or damage to your weapons.

You can cut/neck down 5.56 rounds to make 7.62x25's.

762Tor is a hot little b, If I do say so myself. If I was stuck with just a subgun and/or a pistol back in the day, itd have been my choice. I believe u could do alot worse, a whole lot worse. (alottamobettatorkarevnottalugerberetta)

🙂☕👍

keep your thumb off the slide man.